Merge branch 'next' into for-linus

Prepare input updates for 6.1 merge window.

Merge tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core:

- Introduce and use a single page frag cache for al

Merge tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core:

- Introduce and use a single page frag cache for allocating small skb
heads, clawing back the 10-20% performance regression in UDP flood
test from previous fixes.

- Run packets which already went thru HW coalescing thru SW GRO. This
significantly improves TCP segment coalescing and simplifies
deployments as different workloads benefit from HW or SW GRO.

- Shrink the size of the base zero-copy send structure.

- Move TCP init under a new slow / sleepable version of DO_ONCE().

BPF:

- Add BPF-specific, any-context-safe memory allocator.

- Add helpers/kfuncs for PKCS#7 signature verification from BPF
programs.

- Define a new map type and related helpers for user space -> kernel
communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).

- Allow targeting BPF iterators to loop through resources of one
task/thread.

- Add ability to call selected destructive functions. Expose
crash_kexec() to allow BPF to trigger a kernel dump. Use
CAP_SYS_BOOT check on the loading process to judge permissions.

- Enable BPF to collect custom hierarchical cgroup stats efficiently
by integrating with the rstat framework.

- Support struct arguments for trampoline based programs. Only
structs with size <= 16B and x86 are supported.

- Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
sockets (instead of just TCP and UDP sockets).

- Add a helper for accessing CLOCK_TAI for time sensitive network
related programs.

- Support accessing network tunnel metadata's flags.

- Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.

- Add support for writing to Netfilter's nf_conn:mark.

Protocols:

- WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation
(MLO) work (802.11be, WiFi 7).

- vsock: improve support for SO_RCVLOWAT.

- SMC: support SO_REUSEPORT.

- Netlink: define and document how to use netlink in a "modern" way.
Support reporting missing attributes via extended ACK.

- IPSec: support collect metadata mode for xfrm interfaces.

- TCPv6: send consistent autoflowlabel in SYN_RECV state and RST
packets.

- TCP: introduce optional per-netns connection hash table to allow
better isolation between namespaces (opt-in, at the cost of memory
and cache pressure).

- MPTCP: support TCP_FASTOPEN_CONNECT.

- Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.

- Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.

- Open vSwitch:
- Allow specifying ifindex of new interfaces.
- Allow conntrack and metering in non-initial user namespace.

- TLS: support the Korean ARIA-GCM crypto algorithm.

- Remove DECnet support.

Driver API:

- Allow selecting the conduit interface used by each port in DSA
switches, at runtime.

- Ethernet Power Sourcing Equipment and Power Device support.

- Add tc-taprio support for queueMaxSDU parameter, i.e. setting per
traffic class max frame size for time-based packet schedules.

- Support PHY rate matching - adapting between differing host-side
and link-side speeds.

- Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.

- Validate OF (device tree) nodes for DSA shared ports; make
phylink-related properties mandatory on DSA and CPU ports.
Enforcing more uniformity should allow transitioning to phylink.

- Require that flash component name used during update matches one of
the components for which version is reported by info_get().

- Remove "weight" argument from driver-facing NAPI API as much as
possible. It's one of those magic knobs which seemed like a good
idea at the time but is too indirect to use in practice.

- Support offload of TLS connections with 256 bit keys.

New hardware / drivers:

- Ethernet:
- Microchip KSZ9896 6-port Gigabit Ethernet Switch
- Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
- Analog Devices ADIN1110 and ADIN2111 industrial single pair
Ethernet (10BASE-T1L) MAC+PHY.
- Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).

- Ethernet SFPs / modules:
- RollBall / Hilink / Turris 10G copper SFPs
- HALNy GPON module

- WiFi:
- CYW43439 SDIO chipset (brcmfmac)
- CYW89459 PCIe chipset (brcmfmac)
- BCM4378 on Apple platforms (brcmfmac)

Drivers:

- CAN:
- gs_usb: HW timestamp support

- Ethernet PHYs:
- lan8814: cable diagnostics

- Ethernet NICs:
- Intel (100G):
- implement control of FCS/CRC stripping
- port splitting via devlink
- L2TPv3 filtering offload
- nVidia/Mellanox:
- tunnel offload for sub-functions
- MACSec offload, w/ Extended packet number and replay window
offload
- significantly restructure, and optimize the AF_XDP support,
align the behavior with other vendors
- Huawei:
- configuring DSCP map for traffic class selection
- querying standard FEC statistics
- querying SerDes lane number via ethtool
- Marvell/Cavium:
- egress priority flow control
- MACSec offload
- AMD/SolarFlare:
- PTP over IPv6 and raw Ethernet
- small / embedded:
- ax88772: convert to phylink (to support SFP cages)
- altera: tse: convert to phylink
- ftgmac100: support fixed link
- enetc: standard Ethtool counters
- macb: ZynqMP SGMII dynamic configuration support
- tsnep: support multi-queue and use page pool
- lan743x: Rx IP & TCP checksum offload
- igc: add xdp frags support to ndo_xdp_xmit

- Ethernet high-speed switches:
- Marvell (prestera):
- support SPAN port features (traffic mirroring)
- nexthop object offloading
- Microchip (sparx5):
- multicast forwarding offload
- QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)

- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- support RGMII cmode
- NXP (felix):
- standardized ethtool counters
- Microchip (lan966x):
- QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
- traffic policing and mirroring
- link aggregation / bonding offload
- QUSGMII PHY mode support

- Qualcomm 802.11ax WiFi (ath11k):
- cold boot calibration support on WCN6750
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- Wake-on-WLAN support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz

- MediaTek WiFi (mt76):
- WiFi-to-Ethernet bridging offload for MT7986 chips

- RealTek WiFi (rtw89):
- P2P support"

* tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits)
eth: pse: add missing static inlines
once: rename _SLOW to _SLEEPABLE
net: pse-pd: add regulator based PSE driver
dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller
ethtool: add interface to interact with Ethernet Power Equipment
net: mdiobus: search for PSE nodes by parsing PHY nodes.
net: mdiobus: fwnode_mdiobus_register_phy() rework error handling
net: add framework to support Ethernet PSE and PDs devices
dt-bindings: net: phy: add PoDL PSE property
net: marvell: prestera: Propagate nh state from hw to kernel
net: marvell: prestera: Add neighbour cache accounting
net: marvell: prestera: add stub handler neighbour events
net: marvell: prestera: Add heplers to interact with fib_notifier_info
net: marvell: prestera: Add length macros for prestera_ip_addr
net: marvell: prestera: add delayed wq and flush wq on deinit
net: marvell: prestera: Add strict cleanup of fib arbiter
net: marvell: prestera: Add cleanup of allocated fib_nodes
net: marvell: prestera: Add router nexthops ABI
eth: octeon: fix build after netif_napi_add() changes
net/mlx5: E-Switch, Return EBUSY if can't get mode lock
...

show more ...

Merge drm/drm-next into drm-intel-gt-next

Daniele needs 84d4333c1e28 ("misc/mei: Add NULL check to component match
callback functions") in order to merge the DG2 HuC patches.

Signed-off-by: Tvrtko

Merge drm/drm-next into drm-intel-gt-next

Daniele needs 84d4333c1e28 ("misc/mei: Add NULL check to component match
callback functions") in order to merge the DG2 HuC patches.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge branch 'for-6.1/nvdimm' into libnvdimm-for-next

Add v6.1 content on top of some straggling updates that missed v6.0.

Merge branch 'mlx5-vfio' into mlx5-next

Merge net/mlx5 dependencies for device DMA logging.

Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

Merge branch 'for-6.0/dax' into libnvdimm-fixes

Pick up another "Soft Reservation" fix for v6.0-final on top of some
straggling nvdimm fixes that missed v5.19.

Merge tag 'v6.0-rc6' into locking/core, to refresh the branch

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'net-ethernet-adi-add-adin1110-support'

Alexandru Tachici says:

====================
net: ethernet: adi: Add ADIN1110 support

The ADIN1110 is a low power single port 10BASE-T1L MAC-PH

Merge branch 'net-ethernet-adi-add-adin1110-support'

Alexandru Tachici says:

====================
net: ethernet: adi: Add ADIN1110 support

The ADIN1110 is a low power single port 10BASE-T1L MAC-PHY
designed for industrial Ethernet applications. It integrates
an Ethernet PHY core with a MAC and all the associated analog
circuitry, input and output clock buffering.

ADIN1110 MAC-PHY encapsulates the ADIN1100 PHY. The PHY registers
can be accessed through the MDIO MAC registers.
We are registering an MDIO bus with custom read/write in order
to let the PHY to be discovered by the PAL. This will let
the ADIN1100 Linux driver to probe and take control of
the PHY.

The ADIN2111 is a low power, low complexity, two-Ethernet ports
switch with integrated 10BASE-T1L PHYs and one serial peripheral
interface (SPI) port.

The device is designed for industrial Ethernet applications using
low power constrained nodes and is compliant with the IEEE 802.3cg-2019
Ethernet standard for long reach 10 Mbps single pair Ethernet (SPE).
The switch supports various routing configurations between
the two Ethernet ports and the SPI host port providing a flexible
solution for line, daisy-chain, or ring network topologies.

The ADIN2111 supports cable reach of up to 1700 meters with ultra
low power consumption of 77 mW. The two PHY cores support the
1.0 V p-p operating mode and the 2.4 V p-p operating mode defined
in the IEEE 802.3cg standard.

The device integrates the switch, two Ethernet physical layer (PHY)
cores with a media access control (MAC) interface and all the
associated analog circuitry, and input and output clock buffering.

The device also includes internal buffer queues, the SPI and
subsystem registers, as well as the control logic to manage the reset
and clock control and hardware pin configuration.

Access to the PHYs is exposed via an internal MDIO bus. Writes/reads
can be performed by reading/writing to the ADIN2111 MDIO registers
via SPI.

On probe, for each port, a struct net_device is allocated and
registered. When both ports are added to the same bridge, the driver
will enable offloading of frame forwarding at the hardware level.

Driver offers STP support. Normal operation on forwarding state.
Allows only frames with the 802.1d DA to be passed to the host
when in any of the other states.

When both ports of ADIN2111 belong to the same SW bridge a maximum
of 12 FDB entries will offloaded by the hardware and are marked as such.
====================

Link: https://lore.kernel.org/r/20220913122629.124546-1-andrei.tachici@stud.acs.upb.ro
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

net: ethernet: adi: Add ADIN1110 support

The ADIN1110 is a low power single port 10BASE-T1L MAC-PHY
designed for industrial Ethernet applications. It integrates
an Ethernet PHY core with a MAC and a

net: ethernet: adi: Add ADIN1110 support

The ADIN1110 is a low power single port 10BASE-T1L MAC-PHY
designed for industrial Ethernet applications. It integrates
an Ethernet PHY core with a MAC and all the associated analog
circuitry, input and output clock buffering.

ADIN1110 MAC-PHY encapsulates the ADIN1100 PHY. The PHY registers
can be accessed through the MDIO MAC registers.
We are registering an MDIO bus with custom read/write in order
to let the PHY to be discovered by the PAL. This will let
the ADIN1100 Linux driver to probe and take control of
the PHY.

The ADIN2111 is a low power, low complexity, two-Ethernet ports
switch with integrated 10BASE-T1L PHYs and one serial peripheral
interface (SPI) port.

The device is designed for industrial Ethernet applications using
low power constrained nodes and is compliant with the IEEE 802.3cg-2019
Ethernet standard for long reach 10 Mbps single pair Ethernet (SPE).
The switch supports various routing configurations between
the two Ethernet ports and the SPI host port providing a flexible
solution for line, daisy-chain, or ring network topologies.

The ADIN2111 supports cable reach of up to 1700 meters with ultra
low power consumption of 77 mW. The two PHY cores support the
1.0 V p-p operating mode and the 2.4 V p-p operating mode defined
in the IEEE 802.3cg standard.

The device integrates the switch, two Ethernet physical layer (PHY)
cores with a media access control (MAC) interface and all the
associated analog circuitry, and input and output clock buffering.

The device also includes internal buffer queues, the SPI and
subsystem registers, as well as the control logic to manage the reset
and clock control and hardware pin configuration.

Access to the PHYs is exposed via an internal MDIO bus. Writes/reads
can be performed by reading/writing to the ADIN2111 MDIO registers
via SPI.

On probe, for each port, a struct net_device is allocated and
registered. When both ports are added to the same bridge, the driver
will enable offloading of frame forwarding at the hardware level.

Driver offers STP support. Normal operation on forwarding state.
Allows only frames with the 802.1d DA to be passed to the host
when in any of the other states.

When both ports of ADIN2111 belong to the same SW bridge a maximum
of 12 FDB entries will offloaded by the hardware and are marked as such.

Co-developed-by: Lennart Franzen <lennart@lfdomain.com>
Signed-off-by: Lennart Franzen <lennart@lfdomain.com>
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

Merge drm/drm-next into drm-misc-next

We need 6.0-rc1 to merge the backlight rework PR.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge branch 'am5748-fix' into fixes

Merge branch 'linus' into x86/mm, to refresh the branch

This branch is ~14k commits behind upstream, and has an old merge base
from early into the merge window, refresh it to v6.0-rc3+fixes before
q

Merge branch 'linus' into x86/mm, to refresh the branch

This branch is ~14k commits behind upstream, and has an old merge base
from early into the merge window, refresh it to v6.0-rc3+fixes before
queueing up new commits.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge branch 'sched/warnings' into sched/core, to pick up WARN_ON_ONCE() conversion commit

Merge in the BUG_ON() => WARN_ON_ONCE() conversion commit.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync drm-intel-next with v6.0-rc as well as recent drm-intel-gt-next.

Since drm-next does not have commit f0c70d41e4e8 ("drm/i915/guc: remove
runtime info pri

Merge drm/drm-next into drm-intel-next

Sync drm-intel-next with v6.0-rc as well as recent drm-intel-gt-next.

Since drm-next does not have commit f0c70d41e4e8 ("drm/i915/guc: remove
runtime info printing from time stamp logging") yet, only
drm-intel-gt-next, will need to do that as part of the merge here to
build.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

show more ...

Merge branch 'i2c/make_remove_callback_void-immutable' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into next

Sync up with the latest I2C code base to get updated prototype of I2C
bus

Merge branch 'i2c/make_remove_callback_void-immutable' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into next

Sync up with the latest I2C code base to get updated prototype of I2C
bus remove() method.

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Backmerging for v6.0-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge part of branch 'for-next.instantiate' into for-next

Merge drm/drm-next into drm-intel-next

Sync up. In special to get the drm-intel-gt-next stuff.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking changes from Paolo Abeni:
"Core:

- Refactor the forward memory allocation to better cop

Merge tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking changes from Paolo Abeni:
"Core:

- Refactor the forward memory allocation to better cope with memory
pressure with many open sockets, moving from a per socket cache to
a per-CPU one

- Replace rwlocks with RCU for better fairness in ping, raw sockets
and IP multicast router.

- Network-side support for IO uring zero-copy send.

- A few skb drop reason improvements, including codegen the source
file with string mapping instead of using macro magic.

- Rename reference tracking helpers to a more consistent netdev_*
schema.

- Adapt u64_stats_t type to address load/store tearing issues.

- Refine debug helper usage to reduce the log noise caused by bots.

BPF:

- Improve socket map performance, avoiding skb cloning on read
operation.

- Add support for 64 bits enum, to match types exposed by kernel.

- Introduce support for sleepable uprobes program.

- Introduce support for enum textual representation in libbpf.

- New helpers to implement synproxy with eBPF/XDP.

- Improve loop performances, inlining indirect calls when possible.

- Removed all the deprecated libbpf APIs.

- Implement new eBPF-based LSM flavor.

- Add type match support, which allow accurate queries to the eBPF
used types.

- A few TCP congetsion control framework usability improvements.

- Add new infrastructure to manipulate CT entries via eBPF programs.

- Allow for livepatch (KLP) and BPF trampolines to attach to the same
kernel function.

Protocols:

- Introduce per network namespace lookup tables for unix sockets,
increasing scalability and reducing contention.

- Preparation work for Wi-Fi 7 Multi-Link Operation (MLO) support.

- Add support to forciby close TIME_WAIT TCP sockets via user-space
tools.

- Significant performance improvement for the TLS 1.3 receive path,
both for zero-copy and not-zero-copy.

- Support for changing the initial MTPCP subflow priority/backup
status

- Introduce virtually contingus buffers for sockets over RDMA, to
cope better with memory pressure.

- Extend CAN ethtool support with timestamping capabilities

- Refactor CAN build infrastructure to allow building only the needed
features.

Driver API:

- Remove devlink mutex to allow parallel commands on multiple links.

- Add support for pause stats in distributed switch.

- Implement devlink helpers to query and flash line cards.

- New helper for phy mode to register conversion.

New hardware / drivers:

- Ethernet DSA driver for the rockchip mt7531 on BPI-R2 Pro.

- Ethernet DSA driver for the Renesas RZ/N1 A5PSW switch.

- Ethernet DSA driver for the Microchip LAN937x switch.

- Ethernet PHY driver for the Aquantia AQR113C EPHY.

- CAN driver for the OBD-II ELM327 interface.

- CAN driver for RZ/N1 SJA1000 CAN controller.

- Bluetooth: Infineon CYW55572 Wi-Fi plus Bluetooth combo device.

Drivers:

- Intel Ethernet NICs:
- i40e: add support for vlan pruning
- i40e: add support for XDP framented packets
- ice: improved vlan offload support
- ice: add support for PPPoE offload

- Mellanox Ethernet (mlx5)
- refactor packet steering offload for performance and scalability
- extend support for TC offload
- refactor devlink code to clean-up the locking schema
- support stacked vlans for bridge offloads
- use TLS objects pool to improve connection rate

- Netronome Ethernet NICs (nfp):
- extend support for IPv6 fields mangling offload
- add support for vepa mode in HW bridge
- better support for virtio data path acceleration (VDPA)
- enable TSO by default

- Microsoft vNIC driver (mana)
- add support for XDP redirect

- Others Ethernet drivers:
- bonding: add per-port priority support
- microchip lan743x: extend phy support
- Fungible funeth: support UDP segmentation offload and XDP xmit
- Solarflare EF100: add support for virtual function representors
- MediaTek SoC: add XDP support

- Mellanox Ethernet/IB switch (mlxsw):
- dropped support for unreleased H/W (XM router).
- improved stats accuracy
- unified bridge model coversion improving scalability (parts 1-6)
- support for PTP in Spectrum-2 asics

- Broadcom PHYs
- add PTP support for BCM54210E
- add support for the BCM53128 internal PHY

- Marvell Ethernet switches (prestera):
- implement support for multicast forwarding offload

- Embedded Ethernet switches:
- refactor OcteonTx MAC filter for better scalability
- improve TC H/W offload for the Felix driver
- refactor the Microchip ksz8 and ksz9477 drivers to share the
probe code (parts 1, 2), add support for phylink mac
configuration

- Other WiFi:
- Microchip wilc1000: diable WEP support and enable WPA3
- Atheros ath10k: encapsulation offload support

Old code removal:

- Neterion vxge ethernet driver: this is untouched since more than 10 years"

* tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1890 commits)
doc: sfp-phylink: Fix a broken reference
wireguard: selftests: support UML
wireguard: allowedips: don't corrupt stack when detecting overflow
wireguard: selftests: update config fragments
wireguard: ratelimiter: use hrtimer in selftest
net/mlx5e: xsk: Discard unaligned XSK frames on striding RQ
net: usb: ax88179_178a: Bind only to vendor-specific interface
selftests: net: fix IOAM test skip return code
net: usb: make USB_RTL8153_ECM non user configurable
net: marvell: prestera: remove reduntant code
octeontx2-pf: Reduce minimum mtu size to 60
net: devlink: Fix missing mutex_unlock() call
net/tls: Remove redundant workqueue flush before destroy
net: txgbe: Fix an error handling path in txgbe_probe()
net: dsa: Fix spelling mistakes and cleanup code
Documentation: devlink: add add devlink-selftests to the table of contents
dccp: put dccp_qpolicy_full() and dccp_qpolicy_push() in the same lock
net: ionic: fix error check for vlan flags in ionic_set_nic_features()
net: ice: fix error NETIF_F_HW_VLAN_CTAG_FILTER check in ice_vsi_sync_fltr()
nfp: flower: add support for tunnel offload without key ID
...

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.20 (or 6.0) merge window.

Merge drm/drm-next into drm-misc-next-fixes

Backmerging from drm/drm-next for the final fixes that will go
into v5.20.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v5.19-rc5' into next

Merge with mainline to bring up the latest definition from MFD subsystem
needed for Mediatek keypad driver.

Merge tag 'asoc-fix-v5.19-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.19

A collection of fixes for v5.19, quite large but nothing major -

Merge tag 'asoc-fix-v5.19-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.19

A collection of fixes for v5.19, quite large but nothing major - a good
chunk of it is more stuff that was identified by mixer-test regarding
event generation.

show more ...

net: txgbe: Add build support for txgbe

Add doc build infrastructure for txgbe driver.
Initialize PCI memory space for WangXun 10 Gigabit Ethernet devices.

Signed-off-by: Jiawen Wu <jiawenwu@trustn

net: txgbe: Add build support for txgbe

Add doc build infrastructure for txgbe driver.
Initialize PCI memory space for WangXun 10 Gigabit Ethernet devices.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://lore.kernel.org/r/20220628095530.889344-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get new regmap APIs of v5.19-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>