net: devlink: let the core report the driver name instead of the drivers

The driver name is available in device_driver::name. Right now,
drivers still have to report this piece of information themse

net: devlink: let the core report the driver name instead of the drivers

The driver name is available in device_driver::name. Right now,
drivers still have to report this piece of information themselves in
their devlink_ops::info_get callback function.

In order to factorize code, make devlink_nl_info_fill() add the driver
name attribute.

Now that the core sets the driver name attribute, drivers are not
supposed to call devlink_info_driver_name_put() anymore. Remove
devlink_info_driver_name_put() and clean-up all the drivers using this
function in their callback.

Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Tested-by: Ido Schimmel <idosch@nvidia.com> # mlxsw
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to update drm-misc-next-fixes for the final phase
of the release cycle.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Catch up on 6.1-rc cycle in order to solve the intel_backlight
conflict on linux-next.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-intel-gt-next

Needed to bring in v6.1-rc1 which contains commit f683b9d61319 ("i915: use the VMA iterator")
which is needed for series https://patchwork.freedesktop.org/s

Merge drm/drm-next into drm-intel-gt-next

Needed to bring in v6.1-rc1 which contains commit f683b9d61319 ("i915: use the VMA iterator")
which is needed for series https://patchwork.freedesktop.org/series/110083/ .

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge branch 'main' into zstd-next

Merge drm/drm-fixes into drm-misc-fixes

Backmerging to get v6.1-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

ASoC: jz4752b: Capture fixes

Merge series from Siarhei Volkau <lis8215@gmail.com>:

The patchset fixes:
- Line In path stays powered off during capturing or
bypass to mixer.
- incorrectly repre

ASoC: jz4752b: Capture fixes

Merge series from Siarhei Volkau <lis8215@gmail.com>:

The patchset fixes:
- Line In path stays powered off during capturing or
bypass to mixer.
- incorrectly represented dB values in alsamixer, et al.
- incorrect represented Capture input selector in alsamixer
in Playback tab.
- wrong control selected as Capture Master

show more ...

Merge drm/drm-next into drm-misc-next

Let's kick-off this release cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'v6.1-rc1' into next

Merge with mainline to bring in the latest changes to twl4030 driver.

Merge branch 'master' into mm-hotfixes-stable

Merge branch 'next' into for-linus

Prepare input updates for 6.1 merge window.

Merge tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core:

- Introduce and use a single page frag cache for al

Merge tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core:

- Introduce and use a single page frag cache for allocating small skb
heads, clawing back the 10-20% performance regression in UDP flood
test from previous fixes.

- Run packets which already went thru HW coalescing thru SW GRO. This
significantly improves TCP segment coalescing and simplifies
deployments as different workloads benefit from HW or SW GRO.

- Shrink the size of the base zero-copy send structure.

- Move TCP init under a new slow / sleepable version of DO_ONCE().

BPF:

- Add BPF-specific, any-context-safe memory allocator.

- Add helpers/kfuncs for PKCS#7 signature verification from BPF
programs.

- Define a new map type and related helpers for user space -> kernel
communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).

- Allow targeting BPF iterators to loop through resources of one
task/thread.

- Add ability to call selected destructive functions. Expose
crash_kexec() to allow BPF to trigger a kernel dump. Use
CAP_SYS_BOOT check on the loading process to judge permissions.

- Enable BPF to collect custom hierarchical cgroup stats efficiently
by integrating with the rstat framework.

- Support struct arguments for trampoline based programs. Only
structs with size <= 16B and x86 are supported.

- Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
sockets (instead of just TCP and UDP sockets).

- Add a helper for accessing CLOCK_TAI for time sensitive network
related programs.

- Support accessing network tunnel metadata's flags.

- Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.

- Add support for writing to Netfilter's nf_conn:mark.

Protocols:

- WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation
(MLO) work (802.11be, WiFi 7).

- vsock: improve support for SO_RCVLOWAT.

- SMC: support SO_REUSEPORT.

- Netlink: define and document how to use netlink in a "modern" way.
Support reporting missing attributes via extended ACK.

- IPSec: support collect metadata mode for xfrm interfaces.

- TCPv6: send consistent autoflowlabel in SYN_RECV state and RST
packets.

- TCP: introduce optional per-netns connection hash table to allow
better isolation between namespaces (opt-in, at the cost of memory
and cache pressure).

- MPTCP: support TCP_FASTOPEN_CONNECT.

- Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.

- Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.

- Open vSwitch:
- Allow specifying ifindex of new interfaces.
- Allow conntrack and metering in non-initial user namespace.

- TLS: support the Korean ARIA-GCM crypto algorithm.

- Remove DECnet support.

Driver API:

- Allow selecting the conduit interface used by each port in DSA
switches, at runtime.

- Ethernet Power Sourcing Equipment and Power Device support.

- Add tc-taprio support for queueMaxSDU parameter, i.e. setting per
traffic class max frame size for time-based packet schedules.

- Support PHY rate matching - adapting between differing host-side
and link-side speeds.

- Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.

- Validate OF (device tree) nodes for DSA shared ports; make
phylink-related properties mandatory on DSA and CPU ports.
Enforcing more uniformity should allow transitioning to phylink.

- Require that flash component name used during update matches one of
the components for which version is reported by info_get().

- Remove "weight" argument from driver-facing NAPI API as much as
possible. It's one of those magic knobs which seemed like a good
idea at the time but is too indirect to use in practice.

- Support offload of TLS connections with 256 bit keys.

New hardware / drivers:

- Ethernet:
- Microchip KSZ9896 6-port Gigabit Ethernet Switch
- Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
- Analog Devices ADIN1110 and ADIN2111 industrial single pair
Ethernet (10BASE-T1L) MAC+PHY.
- Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).

- Ethernet SFPs / modules:
- RollBall / Hilink / Turris 10G copper SFPs
- HALNy GPON module

- WiFi:
- CYW43439 SDIO chipset (brcmfmac)
- CYW89459 PCIe chipset (brcmfmac)
- BCM4378 on Apple platforms (brcmfmac)

Drivers:

- CAN:
- gs_usb: HW timestamp support

- Ethernet PHYs:
- lan8814: cable diagnostics

- Ethernet NICs:
- Intel (100G):
- implement control of FCS/CRC stripping
- port splitting via devlink
- L2TPv3 filtering offload
- nVidia/Mellanox:
- tunnel offload for sub-functions
- MACSec offload, w/ Extended packet number and replay window
offload
- significantly restructure, and optimize the AF_XDP support,
align the behavior with other vendors
- Huawei:
- configuring DSCP map for traffic class selection
- querying standard FEC statistics
- querying SerDes lane number via ethtool
- Marvell/Cavium:
- egress priority flow control
- MACSec offload
- AMD/SolarFlare:
- PTP over IPv6 and raw Ethernet
- small / embedded:
- ax88772: convert to phylink (to support SFP cages)
- altera: tse: convert to phylink
- ftgmac100: support fixed link
- enetc: standard Ethtool counters
- macb: ZynqMP SGMII dynamic configuration support
- tsnep: support multi-queue and use page pool
- lan743x: Rx IP & TCP checksum offload
- igc: add xdp frags support to ndo_xdp_xmit

- Ethernet high-speed switches:
- Marvell (prestera):
- support SPAN port features (traffic mirroring)
- nexthop object offloading
- Microchip (sparx5):
- multicast forwarding offload
- QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)

- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- support RGMII cmode
- NXP (felix):
- standardized ethtool counters
- Microchip (lan966x):
- QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
- traffic policing and mirroring
- link aggregation / bonding offload
- QUSGMII PHY mode support

- Qualcomm 802.11ax WiFi (ath11k):
- cold boot calibration support on WCN6750
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- Wake-on-WLAN support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz

- MediaTek WiFi (mt76):
- WiFi-to-Ethernet bridging offload for MT7986 chips

- RealTek WiFi (rtw89):
- P2P support"

* tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits)
eth: pse: add missing static inlines
once: rename _SLOW to _SLEEPABLE
net: pse-pd: add regulator based PSE driver
dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller
ethtool: add interface to interact with Ethernet Power Equipment
net: mdiobus: search for PSE nodes by parsing PHY nodes.
net: mdiobus: fwnode_mdiobus_register_phy() rework error handling
net: add framework to support Ethernet PSE and PDs devices
dt-bindings: net: phy: add PoDL PSE property
net: marvell: prestera: Propagate nh state from hw to kernel
net: marvell: prestera: Add neighbour cache accounting
net: marvell: prestera: add stub handler neighbour events
net: marvell: prestera: Add heplers to interact with fib_notifier_info
net: marvell: prestera: Add length macros for prestera_ip_addr
net: marvell: prestera: add delayed wq and flush wq on deinit
net: marvell: prestera: Add strict cleanup of fib arbiter
net: marvell: prestera: Add cleanup of allocated fib_nodes
net: marvell: prestera: Add router nexthops ABI
eth: octeon: fix build after netif_napi_add() changes
net/mlx5: E-Switch, Return EBUSY if can't get mode lock
...

show more ...

Merge drm/drm-next into drm-intel-gt-next

Daniele needs 84d4333c1e28 ("misc/mei: Add NULL check to component match
callback functions") in order to merge the DG2 HuC patches.

Signed-off-by: Tvrtko

Merge drm/drm-next into drm-intel-gt-next

Daniele needs 84d4333c1e28 ("misc/mei: Add NULL check to component match
callback functions") in order to merge the DG2 HuC patches.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge branch 'for-6.1/nvdimm' into libnvdimm-for-next

Add v6.1 content on top of some straggling updates that missed v6.0.

Merge branch 'add-tc-taprio-support-for-queuemaxsdu'

Vladimir Oltean says:

====================
Add tc-taprio support for queueMaxSDU

The tc-taprio offload mode supported by the Felix DSA driver h

Merge branch 'add-tc-taprio-support-for-queuemaxsdu'

Vladimir Oltean says:

====================
Add tc-taprio support for queueMaxSDU

The tc-taprio offload mode supported by the Felix DSA driver has
limitations surrounding its guard bands.

The initial discussion was at:
https://lore.kernel.org/netdev/c7618025da6723418c56a54fe4683bd7@walle.cc/

with the latest status being that we now have a vsc9959_tas_guard_bands_update()
method which makes a best-guess attempt at how much useful space to
reserve for packet scheduling in a taprio interval, and how much to
reserve for guard bands.

IEEE 802.1Q actually does offer a tunable variable (queueMaxSDU) which
can determine the max MTU supported per traffic class. In turn we can
determine the size we need for the guard bands, depending on the
queueMaxSDU. This way we can make the guard band of small taprio
intervals smaller than one full MTU worth of transmission time, if we
know that said traffic class will transport only smaller packets.

As discussed with Gerhard Engleder, the queueMaxSDU may also be useful
in limiting the latency on an endpoint, if some of the TX queues are
outside of the control of the Linux driver.
https://patchwork.kernel.org/project/netdevbpf/patch/20220914153303.1792444-11-vladimir.oltean@nxp.com/

Allow input of queueMaxSDU through netlink into tc-taprio, offload it to
the hardware I have access to (LS1028A), and (implicitly) deny
non-default values to everyone else. Kurt Kanzenbach has also kindly
tested and shared a patch to offload this to hellcreek.

v3 at:
https://patchwork.kernel.org/project/netdevbpf/cover/20220927234746.1823648-1-vladimir.oltean@nxp.com/
v2 at:
https://patchwork.kernel.org/project/netdevbpf/list/?series=679954&state=*
v1 at:
https://patchwork.kernel.org/project/netdevbpf/cover/20220914153303.1792444-1-vladimir.oltean@nxp.com/
====================

Link: https://lore.kernel.org/r/20220928095204.2093716-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: dsa: hellcreek: Offload per-tc max SDU from tc-taprio

Add support for configuring the max SDU per priority and per port. If not
specified, keep the default.

Signed-off-by: Kurt Kanzenbach <kur

net: dsa: hellcreek: Offload per-tc max SDU from tc-taprio

Add support for configuring the max SDU per priority and per port. If not
specified, keep the default.

Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: dsa: hellcreek: refactor hellcreek_port_setup_tc() to use switch/case

The following patch will need to make this function also respond to
TC_QUERY_BASE, so make the processing more structured a

net: dsa: hellcreek: refactor hellcreek_port_setup_tc() to use switch/case

The following patch will need to make this function also respond to
TC_QUERY_BASE, so make the processing more structured around the
tc_setup_type.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge branch 'mlx5-vfio' into mlx5-next

Merge net/mlx5 dependencies for device DMA logging.

Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

Merge branch 'for-6.0/dax' into libnvdimm-fixes

Pick up another "Soft Reservation" fix for v6.0-final on top of some
straggling nvdimm fixes that missed v5.19.

Merge branch 'net-dsa-remove-unnecessary-set_drvdata'

Yang Yingliang says:

====================
net: dsa: remove unnecessary set_drvdata()

In this patch set, I removed all set_drvdata(NULL) functi

Merge branch 'net-dsa-remove-unnecessary-set_drvdata'

Yang Yingliang says:

====================
net: dsa: remove unnecessary set_drvdata()

In this patch set, I removed all set_drvdata(NULL) functions
in ->remove() in drivers/net/dsa/.

The driver_data will be set to NULL in device_unbind_cleanup()
after calling ->remove(), so all set_drvdata(NULL) functions
in ->remove() is redundant, they can be removed.

Here is the previous patch set:
https://lore.kernel.org/netdev/facfc855-d082-cc1c-a0bc-027f562a2f45@huawei.com/T/
====================

Link: https://lore.kernel.org/r/20220921140524.3831101-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: dsa: hellcreek: remove unnecessary platform_set_drvdata()

Remove unnecessary platform_set_drvdata() in ->remove(), the driver_data
will be set to NULL in device_unbind_cleanup() after calling -

net: dsa: hellcreek: remove unnecessary platform_set_drvdata()

Remove unnecessary platform_set_drvdata() in ->remove(), the driver_data
will be set to NULL in device_unbind_cleanup() after calling ->remove().

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge tag 'v6.0-rc6' into locking/core, to refresh the branch

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge drm/drm-next into drm-misc-next

We need 6.0-rc1 to merge the backlight rework PR.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge branch 'am5748-fix' into fixes

Merge branch 'linus' into x86/mm, to refresh the branch

This branch is ~14k commits behind upstream, and has an old merge base
from early into the merge window, refresh it to v6.0-rc3+fixes before
q

Merge branch 'linus' into x86/mm, to refresh the branch

This branch is ~14k commits behind upstream, and has an old merge base
from early into the merge window, refresh it to v6.0-rc3+fixes before
queueing up new commits.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...