Merge tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc and other driver updates from Greg KH:
"Here is the big set of char/misc and other sm

Merge tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc and other driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
updates for 5.18-rc1.

Included in here are merges from driver subsystems which contain:

- iio driver updates and new drivers

- fsi driver updates

- fpga driver updates

- habanalabs driver updates and support for new hardware

- soundwire driver updates and new drivers

- phy driver updates and new drivers

- coresight driver updates

- icc driver updates

Individual changes include:

- mei driver updates

- interconnect driver updates

- new PECI driver subsystem added

- vmci driver updates

- lots of tiny misc/char driver updates

All of these have been in linux-next for a while with no reported
problems"

* tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits)
firmware: google: Properly state IOMEM dependency
kgdbts: fix return value of __setup handler
firmware: sysfb: fix platform-device leak in error path
firmware: stratix10-svc: add missing callback parameter on RSU
arm64: dts: qcom: add non-secure domain property to fastrpc nodes
misc: fastrpc: Add dma handle implementation
misc: fastrpc: Add fdlist implementation
misc: fastrpc: Add helper function to get list and page
misc: fastrpc: Add support to secure memory map
dt-bindings: misc: add fastrpc domain vmid property
misc: fastrpc: check before loading process to the DSP
misc: fastrpc: add secure domain support
dt-bindings: misc: add property to support non-secure DSP
misc: fastrpc: Add support to get DSP capabilities
misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP
misc: fastrpc: separate fastrpc device from channel context
dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells
dt-bindings: nvmem: make "reg" property optional
nvmem: brcm_nvram: parse NVRAM content into NVMEM cells
nvmem: dt-bindings: Fix the error of dt-bindings check
...

show more ...

Merge branch 'for-5.18/amd-sfh' into for-linus

- dead code elimination (Christophe JAILLET)

Merge tag 'iio-for-5.18a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

First set of new device support, fixes, cleanups and features for IIO in

Merge tag 'iio-for-5.18a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

First set of new device support, fixes, cleanups and features for IIO in 5.18

This cycle we had quite a few series that applied similar changes
to lots of drivers. To keep this description manageable I have
called those out in their own section rather than per driver.

Particularly pleased to see the long running AFE precision series
going in this cycle.

Series includes some late breaking fixes.

New device support
* adi,ada4250 amplifier
- New driver and dt bindings for this programmable gain amplifier.
* adi,admv1014 microwave down-converter
- New driver, dt bindings and some device specific ABI that
may be generalized as more drivers for devices similar to this
are added.
* adi,admv4420 K Band down-converter.
- New driver and dt bindings.
* adi,adxl367 accelerometer driver.
- New driver, dt-bindings + some new IIO ABI definitions to support
reference magnitude events where an estimate of the acceleration
due to gravity has been removed.
- A few fixes as follow up patches.
* adi,ltc2688 DAC with toggle and dither modes.
- New driver and bindings. Includes some new driver specific (for now)
ABI for handling toggle mode and the addition of a dither waveform to
the DAC output.
* AFE (analog front end) add support for additional types of analog device
in front of an ADC.
- RTD temperature sensors with dt bindings.
- Temperature transducers wit dt bindings.
- Related cleanup and features listed in other sections below.
* maxim,ds3502 potentiometer.
- Add support to ds1803 driver which required significant rework.
* mediatek,mt2701-auxadc driver
- Add mediatek,mt8186-auxadc - id table and chip specific info only.
* semtech,sx9324, semtech,ax9360
- Substantial refactoring of sx9310 to extract core logic for reuse
into a separate module
- New driver using this supporting sx9324 proximity sensors.
- New driver using this supporting sx9360 proximity sensors.
* silan,sc7a20
- Compatible with the st,lis2dh (or nearly anyway) so add ID and
chip specific info to enable support. Also silan vendor ID added
for dt-bindings.

Staging graduation
* adi,ad7280a monitoring ADC for stacked lithium-ion batteries in
electric cars and similar.
- Substantial rework of driver required to bring inline with current
IIO best practice. An unusual device in IIO so some interesting features
we may see more of in future.

Multiple driver/core cleanup
- Use sysfs_emit() in simple locations where there is no path to change
to various core created attributes.
- Trivial white space fixes around inconsistency between space after { and
before } in id tables.
- Introduce new handling for fractional types to avoid repeated similar
implementations. Use this in 3 drivers. Note this is also targeted
at future use in the AFE driver and was motivated by discussions
around the precision related work on that driver.
- of related header cleanups - drop of*.h and add mod_devicetable.h as
appropriate.
- Move a number of symbol exports into IIO_* namespaces. Two categories,
1) Library used by multiple drivers e.g. st_sensors
2) Core driver module exporting functions used by bus specific modules.
A few related cleanups in this set.
- Switch from CONFIG_PM_* guards to new DEFINE_SIMPLE_DEV_PM_OPS() and
similar to simplify drivers and take advantage of these new macros
allowing the compiler to do the job or removing unused code without
the need for __maybe_unused markings. Conversion of other drivers to
these new macros ongoing.

Features
* adi,adf4350
- Switch from of specific to generic device properties enabling use with
other firmware types.
* adi,adx345
- Switch from of specific to generic device properties.
- Add ACPI ID ADS0345
- Related driver cleanup.
* adi,hmc425a
- Switch from of specific to generic device properties.
* afe analog rescaler driver
- Wider range of types supported for scale.
- Support offset.
- Kunit tests.
* atlas,ezo-sensor
- Convert from of to device properties.
* fsl,mma8452
- Support mount matrix.
* infineon,dps310:
- Add ACPI ID IFX3100.
* invensense,mpu6050
- Convert to generic device properties.
* maxim,ds1803
- Add out_raw_available before supporting more devices.
- Convert from of specific to device properties.
* samsung,ssp_sensors
- Convert from of specific to device properties.
* st,stm32-timer trigger
- Convert from of specific to device properties.
* ti,hdc101x
- Add ACPI ID TXNW1010.
* ti,tsc2046:
- Add read_raw support to enable use of iio_hwmon and similar.

Fixes / cleanup.
* mailmap
- Update for Cai Huoqing
* MAINTAINERS
- Fix Analog Devices related links.
- Add entry for ADRF6780
- Add entry for ADMV1013
- Add entry for AD7293
- Add entry for ADMV8818
- Update files listed for adis-lib
* iio core:
- Fix wrong comment about current_mode being something a driver should
ever access.
- Use struct_size() rather than open coding in industrialio-hw-consumer
* adi,axl355
- Use units.h definitions instead of local versions.
* adi,adis-lib
- Simplify *updated_bits() macro
- Whitespace cleanup.
* afe - Note many of these fixes only apply to particular configurations
so the problems have probably not been seen in the wild, but will be
visible with new usecases enabled this cycle.
- Fix application of consumer scale for IIO_VAL_INT.
- Apply a scale of 1 when no scale is provided.
- Make best effort to establish a valid offset value for fractional
cases.
- Use s64 for scale calculations where parameters may be signed.
- Tidy up include order.
- Improve accuracy for small fractional sales
- Reduce risk of integer overflow.
* ams,as3935
- Use devm_delayed_work_autocancel() to replace open coded equivalent.
* aspeed,adc
- Fix wrong use of divider flag.
* atmel,sama5d2-adc
- Relax atmel,trigger-edge-type to optional.
- Drop Ludovic Desroches from listed maintainers of the dt-binding
inline with previous MAINTAINERS entry update.
* fsl,mma8452
- Fix probing when i2c_device_id used.
- dev_get_drvdata() on the iio_dev->dev, no longer returns iio_dev.
Use dev_to_iio_dev() instead. Note the original path in here
worked more by luck than design.
* invensense,mpu6050
- Drop ACPI_PTR() protection to avoid an unused warning.
- Use fact ACPI_COMPANION() returns null when ACPI_HANDLE() does to
simplify handling.
* motorola,cpcap-adc
- Drop unused assignment.
* qcom,spmi-adc
- Fix wrong example of 'reg' in binding document.
* renesas,rzg2l-adc
- Trivial typo fix.
* semtech,sx9360
- Fix wrong register handling for event generation.
* st_sensors
- Allow manual disabling of I2C or SPI module if not needed for a particular
board. Default is still to enable the bus specific module if
appropriate bus is supported.
* st,lsm6dsx
- dev_get_drvdata() on the iio_dev->dev, no longer returns iio_dev.
Use dev_to_iio_dev() instead.
* ti,palmas-gpadc
- Split the interrupt fields in the dt-binding example
* ti,tsc2046
- Rework state machine to improve readability after recent debugging of
an issue fixed elsewhere.
- Add a sanity check to avoid very large memory allocations if a crazy
delay is specified.
* ti,twl6030
- Add error handling if devm_request_threaded_irq() fails.
* xilinx,ams
- Use devm_delayed_work_autocancel() instead of open coding equivalent.
- Fix missing required clock entry in dt-binding.
- Fix miss counting of channels resulting in ps channels not
being enabled.
- Fix incorrect values written to sequencer registers.
- Fix sequence for single channel reading.

* tag 'iio-for-5.18a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (245 commits)
iio: adc: xilinx-ams: Fix single channel switching sequence
iio: adc: xilinx-ams: Fixed wrong sequencer register settings
iio: adc: xilinx-ams: Fixed missing PS channels
dt-bindings: iio: adc: zynqmp_ams: Add clock entry
iio: accel: mma8452: use the correct logic to get mma8452_data
iio: adc: aspeed: Add divider flag to fix incorrect voltage reading.
iio: imu: st_lsm6dsx: use dev_to_iio_dev() to get iio_dev struct
dt-bindings: iio: Add ltc2688 documentation
iio: ABI: add ABI file for the LTC2688 DAC
iio: dac: add support for ltc2688
dt-bindings: iio: afe: add bindings for temperature transducers
dt-bindings: iio: afe: add bindings for temperature-sense-rtd
iio: afe: rescale: add temperature transducers
iio: afe: rescale: add RTD temperature sensor support
iio: test: add basic tests for the iio-rescale driver
iio: afe: rescale: reduce risk of integer overflow
iio: afe: rescale: fix accuracy for small fractional scales
iio: afe: rescale: add offset support
iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support
iio: afe: rescale: expose scale processing function
...

show more ...

Merge tag 'v5.17-rc4' into for-linus

Merge with mainline to get the Intel ASoC generic helpers header and
other changes.

iio:adc:rcar: Switch from CONFIG_PM guards to pm_ptr() etc

Letting the compiler remove these functions when the kernel is built
without CONFIG_PM support is simpler and less error prone than the
use

iio:adc:rcar: Switch from CONFIG_PM guards to pm_ptr() etc

Letting the compiler remove these functions when the kernel is built
without CONFIG_PM support is simpler and less error prone than the
use of #ifdef based config guards.

Removing instances of this approach from IIO also stops them being
copied into new drivers.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220130193147.279148-46-jic23@kernel.org

show more ...

Merge tag 'v5.17-rc4' into next

Sync up with mainline to get the latest changes in HID subsystem.

Merge remote-tracking branch 'drm/drm-next' into drm-misc-next

First backmerge into drm-misc-next. Required for more helpers backmerged,
and to pull in 5.17 (rc2).

Signed-off-by: Maarten Lankhorst

Merge remote-tracking branch 'drm/drm-next' into drm-misc-next

First backmerge into drm-misc-next. Required for more helpers backmerged,
and to pull in 5.17 (rc2).

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge tag 'kvmarm-fixes-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 5.17, take #2

- A couple of fixes when handling an exception while a SEr

Merge tag 'kvmarm-fixes-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 5.17, take #2

- A couple of fixes when handling an exception while a SError has been
delivered

- Workaround for Cortex-A510's single-step[ erratum

show more ...

Merge drm/drm-next into drm-intel-gt-next

Backmerge to bring in 5.17-rc2 to introduce a common baseline
to merge i915_regs changes from drm-intel-next.

Signed-off-by: Joonas Lahtinen <joonas.lahtin

Merge drm/drm-next into drm-intel-gt-next

Backmerge to bring in 5.17-rc2 to introduce a common baseline
to merge i915_regs changes from drm-intel-next.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Catch-up with 5.17-rc2 and trying to align with drm-intel-gt-next
for a possible topic branch for merging the split of i915_regs...

Signed-off-by: Rodrigo Viv

Merge drm/drm-next into drm-intel-next

Catch-up with 5.17-rc2 and trying to align with drm-intel-gt-next
for a possible topic branch for merging the split of i915_regs...

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Backmerging drm/drm-fixes into drm-misc-fixes for v5.17-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'next' into for-linus

Prepare input updates for 5.17 merge window.

Merge tag 'char-misc-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc and other driver updates from Greg KH:
"Here is the large set of char, misc, and othe

Merge tag 'char-misc-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc and other driver updates from Greg KH:
"Here is the large set of char, misc, and other "small" driver
subsystem changes for 5.17-rc1.

Lots of different things are in here for char/misc drivers such as:

- habanalabs driver updates

- mei driver updates

- lkdtm driver updates

- vmw_vmci driver updates

- android binder driver updates

- other small char/misc driver updates

Also smaller driver subsystems have also been updated, including:

- fpga subsystem updates

- iio subsystem updates

- soundwire subsystem updates

- extcon subsystem updates

- gnss subsystem updates

- phy subsystem updates

- coresight subsystem updates

- firmware subsystem updates

- comedi subsystem updates

- mhi subsystem updates

- speakup subsystem updates

- rapidio subsystem updates

- spmi subsystem updates

- virtual driver updates

- counter subsystem updates

Too many individual changes to summarize, the shortlog contains the
full details.

All of these have been in linux-next for a while with no reported
issues"

* tag 'char-misc-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (406 commits)
counter: 104-quad-8: Fix use-after-free by quad8_irq_handler
dt-bindings: mux: Document mux-states property
dt-bindings: ti-serdes-mux: Add defines for J721S2 SoC
counter: remove old and now unused registration API
counter: ti-eqep: Convert to new counter registration
counter: stm32-lptimer-cnt: Convert to new counter registration
counter: stm32-timer-cnt: Convert to new counter registration
counter: microchip-tcb-capture: Convert to new counter registration
counter: ftm-quaddec: Convert to new counter registration
counter: intel-qep: Convert to new counter registration
counter: interrupt-cnt: Convert to new counter registration
counter: 104-quad-8: Convert to new counter registration
counter: Update documentation for new counter registration functions
counter: Provide alternative counter registration functions
counter: stm32-timer-cnt: Convert to counter_priv() wrapper
counter: stm32-lptimer-cnt: Convert to counter_priv() wrapper
counter: ti-eqep: Convert to counter_priv() wrapper
counter: ftm-quaddec: Convert to counter_priv() wrapper
counter: intel-qep: Convert to counter_priv() wrapper
counter: microchip-tcb-capture: Convert to counter_priv() wrapper
...

show more ...

Merge tag 'iio-for-5.17a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

1st set of IIO new device support, features and cleanup for 5.17

Include

Merge tag 'iio-for-5.17a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

1st set of IIO new device support, features and cleanup for 5.17

Includes some fixes that were either late breaking, low priority or
complex enough to not be good to rush in late in the cycle.

Tree rebased today to fix up some trivial issues + pull in a fix that
was previously on the fixes-togreg branch. Vast majority have been
in linux-next for some time now.

New device support
* adi,ad7293
- New driver and bindings for this Power Amplifier drain current
controller. A complex device with various related monitoring functions.
* adi,ad75513R
- New driver and bindings for this combined ADC and DAC device.
- A few follow up fixes.
* adi,admv8818
- New driver (and type) for this 2-18GHz filter device. Includes
bindings and ABI documentation to allow clk_notifier based auto
adjustment of the filters in appropriate applications.
* liteon,ltr501
- Support for the ltr303. ID and chip specific info table.
* xilinx,ams
- New generic firmware function fwnode_iomap() as used in this driver.
- New driver and bindings for this ADC and on-chip sensors as found
in various Xilinx devices.

Core
* Introduced IIO_VAL_INT_64 which uses val and val2 in IIO callbacks to
form a 64 bit integer when higher precision needed.
* Allow IIO_ENUM_AVAILABLE to be used with different shared values.
* Fix a long term issue with scheduling whilst atomic when iio_trig_poll()
is called but no trigger consumers are actually enabled and hence the
trigger may be reenabled from the interrupt handler. Seen in the wild
on the tsc2046.
* Mark iio_device_type const.
* buffer: Use a separate index variable to simplify code.
* buffer-dma: Clear out unused struct iio_buffer_block
* buffer-dmaengine: Switch to cheaper round_down() as power of 2 values.

Tests/tools
* format_value
- Check against NULL returns from allocations in tests.
- Add IIO_VAL_INT_64 test case.
* event_monitor
- Flush the output after event to given more consistent latency
when tool output piped to other programs.

Driver Features
* axp20x
- Add support for NTC thermistor channel and document TS pin binding.
* arm,scmi
- Add reading of raw channel values (using IIO_VAL_INT_64)
* liteon,ltr501
- Add proximity-near-level support and dt-binding.

Tree wide cleanup
* Remove no-op trigger ops from multiple drivers.
* Stop using dev_get_drvdata() on the iio_dev->dev in various drivers
and then stop assigning it to allow this to be used for other purposes.
We can always get to the indio_dev using dev_to_iio_dev() which is
a container_of() based approach. Also cleanup up some related unnecessary
convoluted cases.
- atmel,at91-sam5d2
- nxp,imx7d
- meas,ms5611
- st,st_sensors
* Where available (or easy to introduce) use the scan_type.* values
in place of a second copy for read_raw and similar paths.
- adi,ad7266
- bosch,bma220
- fsl,mac3110
- fsl,mma7455
- fsl,mpl3115
- kionix,kcjk-1013
- sensortek,stk8ba50
- sensortek,stk8312
- ti,adc12138
- ti,ads1015
- vti,sca3000
- xilinx,xadc-core
* Switch drives over to generic firmware properties including appropriate
header changes to avoid including of.h
- Various DACs had false CONFIG_OF dependencies.
- dpot-dac
- envelope-detector
- adi,ad5755
- adi,ad5758
- capella,cm3605
- maxim,max9611
- microchip,mcp41010
- microchip,mcp3911
- ti,adc12138
* Trivial clang warning fixes for W=1 warnings.

Driver specific cleanup and minor fixes
* adi,ad7606
- Comment fixes.
* ams,ad3935
- Drop pointless cast to the same type.
* atmel,at91-sama5d2
- Fix wrong cast of iio_dev->dev to platform_device that happened to
be harmless.
* fsl,mma7660
- Stop i2c remove() function returning an error code. Part of a rework
to eventually stop returning anything from these.
* fsl,mma8452
- Use correct type for local irqreturn_t.
* nxp,imx8mq
- Maintainer email address update.
* nxp,lpc18xx_adc
- Ensure clk_prepare_enable() called before clk_get_rate().
- Switch of.h for mod_devicetable.h to reflect no of specific functions,
just the id table.
* renesas,rzg2l
- Drop a dev_err() that just duplicates error printed in platform_get_irq()
* sgx,vz89x
- Drop pointless cast.
* st,lsm6dsx
- Make it possible to disable the sensorhub from DT to avoid a corner
case where the address of a slave device many be accidentally modified.
* st,stm32-adc
- Stop leaking an of_node in an error path.
* st,stmp2
- Avoid wrong sized type for bit field which could result in
over-reading (harmless). Precursor to enabling -Warray-bounds.
* ti,adc081c
- Put back some ACPI support for non standards compliant ADC081C
ID because it is known to be in the wild on some Aaeon boards.
* ti,ads8688
- Cleanup redundant local ret variable assignment.
* ti,ina2xx-adc
- Use helper macro kthread_run() to replace some boilerplate.
- Avoid double reference counting.
- Drop pointless cast.
* xilinx,xadc
- Make the IRQ optional as not always wired to the host system.

* tag 'iio-for-5.17a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (103 commits)
iio: adc: ti-adc081c: Partial revert of removal of ACPI IDs
iio:addac:ad74413r: Fix uninitialized ret in a path that won't be hit.
MAINTAINERS: Add maintainer for xilinx-ams
dt-bindings: iio: adc: Add Xilinx AMS binding documentation
iio: adc: Add Xilinx AMS driver
device property: Add fwnode_iomap()
iio:accel:kxcjk-1013: Mark struct __maybe_unused to avoid warning.
iio:accel:bmc150: Mark structure __maybe_unused as only needed with for pm ops.
iio:dummy: Drop set but unused variable len.
iio:magn:ak8975: Suppress clang W=1 warning about pointer to enum conversion.
iio:imu:inv_mpu6050: Suppress clang W=1 warning about pointer to enum conversion.
iio:imu:inv_icm42600: Suppress clang W=1 warning about pointer to enum conversion.
iio:dac:mcp4725: Suppress clang W=1 warning about pointer to enum conversion.
iio:amplifiers:hmc425a: Suppress clang W=1 warning about pointer to enum conversion.
iio:adc:ti-ads1015: Suppress clang W=1 warning about pointer to enum conversion.
iio:adc:rcar: Suppress clang W=1 warning about pointer to enum conversion.
iio:adc:ina2xx-adc: Suppress clang W=1 warning about pointer to enum conversion.
iio:accel:bma180: Suppress clang W=1 warning about pointer to enum conversion.
drivers:iio:dac: Add AD3552R driver support
dt-bindings: iio: dac: Add adi,ad3552r.yaml
...

show more ...

iio:adc:rcar: Suppress clang W=1 warning about pointer to enum conversion.

Cast to a uintptr_t rather than directly to the enum.

As per the discussion in below linked media patch.

Link: https://lo

iio:adc:rcar: Suppress clang W=1 warning about pointer to enum conversion.

Cast to a uintptr_t rather than directly to the enum.

As per the discussion in below linked media patch.

Link: https://lore.kernel.org/linux-media/CAK8P3a2ez6nEw4d+Mqa3XXAz0RFTZHunqqRj6sCt7Y_Eqqs0rw@mail.gmail.com/
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20211128172445.2616166-4-jic23@kernel.org

show more ...

Merge tag 'v5.15' into next

Sync up with the mainline to get the latest APIs and DT bindings.

Merge branch 'for-5.15-printk-index' into for-linus

Merge branch 'perf/urgent' into perf/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'v5.14-rc6' into locking/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Backmerge remote-tracking branch 'drm/drm-next' into drm-misc-next

Required bump from v5.13-rc3 to v5.14-rc3, and to pick up sysfb compilation fixes.

Signed-off-by: Maarten Lankhorst <maarten.lankh

Backmerge remote-tracking branch 'drm/drm-next' into drm-misc-next

Required bump from v5.13-rc3 to v5.14-rc3, and to pick up sysfb compilation fixes.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge branch 'fixes-v5.14' into fixes

Merge drm/drm-next into drm-intel-gt-next

Catching up with 5.14-rc1 and also preparing for a
needed common topic branch for the "Minor revid/stepping
and workaround cleanup"

Reference: https://patc

Merge drm/drm-next into drm-intel-gt-next

Catching up with 5.14-rc1 and also preparing for a
needed common topic branch for the "Minor revid/stepping
and workaround cleanup"

Reference: https://patchwork.freedesktop.org/series/92299/
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Catching up with 5.14-rc1

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge tag 'staging-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging / IIO driver updates from Greg KH:
"Here is the big set of IIO and staging driver patches f

Merge tag 'staging-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging / IIO driver updates from Greg KH:
"Here is the big set of IIO and staging driver patches for 5.14-rc1.

Loads of IIO driver updates and additions in here, the shortlog has
the full details.

For the staging side, we moved a few drivers out of staging, and
deleted the kpc2000 drivers as the original developer asked us to
because no one was working on them anymore.

Also in here are loads of coding style cleanups due to different
intern projects focusing on the staging tree to try to get experience
doing kernel development.

All of these have been in the linux-next tree for a while with no
reported problems"

* tag 'staging-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (744 commits)
staging: hi6421-spmi-pmic: cleanup some macros
staging: hi6421-spmi-pmic: change identation of a table
staging: hi6421-spmi-pmic: change a return code
staging: hi6421-spmi-pmic: better name IRQs
staging: hi6421-spmi-pmic: use devm_request_threaded_irq()
staging: hisilicon,hi6421-spmi-pmic.yaml: cleanup descriptions
spmi: hisi-spmi-controller: move driver from staging
phy: phy-hi3670-usb3: move driver from staging into phy
staging: rtl8188eu: remove include/rtw_debug.h header
staging: rtl8188eu: remove GlobalDebugLevel variable
staging: rtl8188eu: remove DRIVER_PREFIX preprocessor definition
staging: rtl8188eu: remove RT_TRACE macro
staging: rtl8188eu: remove all RT_TRACE calls from hal/rtl8188eu_recv.c
staging: rtl8188eu: remove all RT_TRACE calls from hal/hal_intf.c
staging: rtl8188eu: remove all RT_TRACE calls from hal/rtl8188eu_xmit.c
staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_xmit.c
staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_pwrctrl.c
staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_recv.c
staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_ioctl_set.c
staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_ieee80211.c
...

show more ...

Merge tag 'iio-for-5.14a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

1st set of new IIO/counter device support, features and cleanup for 5.14

T

Merge tag 'iio-for-5.14a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

1st set of new IIO/counter device support, features and cleanup for 5.14

There are a couple of large cleanup sets in here alongside a number of new
drivers.

Note an immutable branch merged to add a stub for i2c_verify_client()
as needed to avoid a build issue in the fxls8962af driver as a result of a
workaround for a device errata that only applies when i2c interface is used.

Counters
========

New device support
* intel,quadrature encoder peripheral found on Elkhart Lake platforms.
- New driver.

IIO
===

New device support
* amstaos,tsl2591 ambient light sensor.
- New driver + bindings
- Follow up fix to ensure some local variables are suitable for error
handling.
* fsl,fxls8962af + fsl,fxls8964af accelerometers
- New driver + bindings
- Includes an errata work around that cause a build bot failure fixed
by adding a stub to i2c.
* kionix,kxcjk-1013
- Add support for KX023-1025 device. Mostly a different register map
that needed to be supported.
* murata,sca3300 accelerometer
- New driver + bindings
* st,lsm9ds0 IMU
- Rework of st,sensors driver to cleanly support this new glue driver
that enables the two parts of the LSM9DS0.
* ti,tsc2046 touchscreen controller ADC.
- New driver. Intent here is to use this with existing IIO consumer
drivers such as resistive-adc-touch.
- Follow up fix to avoid an issue with unsigned subtraction in error
check.
* ti,tmp117 digital temperature sensor
- New driver + bindings

Features
* adi,ad5755
- Add missing dt-binding doc
* adi,ad7298
- Add ACPI ID used on Intel Galileo Gen 1 boards.
- Add missing dt-binding doc
* adi,ad7476
- Add missing dt-binding doc
* adi,ad7746
- Add missing dt-binding doc for this driver that will hopefully move out
of staging shortly. Update staging driver to use the binding instead of
platform data.
* adi,adis16201 + adis16209
- Add missing dt-binding doc
* adi,adis16480
- Support burst mode for adis16495 and adis16497 parts.
* bosch,bma220
- Add missing dt-binding doc
* fsl,mma7455
- Add missing dt-binding doc
* iio-rescale
- Support handling of processed channels from provider. Some ADCs
require (typically non linear) calibration functions to be applied,
and so provide only IIO_CHAN_INFO_PROCESSED read back. They can be
used as providers to the iio-rescale driver which needs to handle them
somewhat differently from IIO_CHAN_INFO_RAW
* sensiron,sps30
- Support the serial interface. Note this required significant
refactoring of existing driver.
* st,st-sensors
- Add mount matrix support for normal dt-binding whilst continuing to
support the odd ACPI approach for accelerometers.
* ti,dac082s085 + similar
- Add missing dt-binding doc
* trivial-devices - add entries for
- memsic,mx4005, memsic,mx6255 and memsic,mxc6655
- sensortek,stk8312 and sensortek,stk8ba50

Cleanup / minor fixes
* core
- Use devm_add_action_or_reset() to replace boilerplate in several
driver and core IIO devm_* functions.
- Fix an error path issue introduced by above, that could return an
error pointer rather than the expected null from dev_iio_device_alloc()
- Move more IIO internals related fields from struct iio_dev to
struct iio_dev_opaque.
- Drop unused final update of in_loc in demux setup.
* Docs
- Move some docs from driver specific to core dos to avoid replication
of names which the documentation builder does not allow.
Note this means adding a few device specific notes to the general docs
to cover the more unusual uses of the ABI.
- ABI: Move old buffer/* and scan_elements/* docs to obsolete as now we
have the bufferX/* variant. Not we are not getting rid of these
interfaces, just encouraging new code to use the new interface.
* IIO wide:
- Tidy up new cases of dev.parent etc being set in drivers as the core
now does it.
- Fix more cases of possible miss-aligned buffers when passed to
iio_push_to_buffers_with_timestamp(). Note we only have one known
instance of anyone seeing this bug actually happening, so this has been
a low priority cleanup effort for several cycles.
- sysfs_emit() used in more drivers.
- Runtime pm tidy up and use of pm_runtime_resume_and_get()
- Buffer alignment fixes as iio_push_to_buffers_with_timestamp requires
that the timestamp when inserted by naturally aligned + consumers can
assume that all fields are naturally aligned. Part of a long running
effort, with at least 2 more series to come tackling additional
variants.
- Stop specifying "mount-matrix" property name in every lookup of the
mount matrix from firmware by hard coding it in the core.
* adi,ad7476
- Handle the variety of different regulators used by the parts supported
by this driver (came up in dt-binding review)
* adi,ad7746
- Trivial drop of if (ret) return ret; return 0; pattern
- Tidy up comments
- Pull capdac setup out to own function.
* adi,ad7766
- Trivial drop of if (ret) return ret; return 0; pattern
* adi,adis
- Avoid returning error codes in interrupt handlers.
- Handle a failure in spi_write in the trigger handler.
- Rework to add updating of device page after changing it.
- Don't push data to IIO buffers when read failed.
- Add configuration of burst max speed to core avoid handling this in
each driver.
- Use the adis_dev_lock() helper in adis16260 and adis16136 drivers.
- Excessive includes cleanup via include-what-you-use static checker
after zero day highlighted that these needed updating.
* afe
- Amend binding to add #io-channel-cells, thus allowing this IIO
consumer to also be an IIO provider.
* aosong,am2315
- Drop ACPI id. Unlikely this one is in the wild and it isn't valid
ACPI naming.
* bosch,bma180
- Adding missing bandwidth settings (500, 1000 Hz)
* bosch,bme680
- Drop ACPI id. Unlikely this one is in the wild and it isn't valid
ACPI naming.
* ep93xx_adc,
- Drop a redundant error print.
* maxim,max118
- Convert remainder of probe() to devm_ managed functions.
- Avoid some repeated jumping back and forth between iio_dev and
spi structures.
* maxim,max11100
- Use get_unaligned_be16() instead of open coding.
- Convert remainder of probe() to devm_ managed functions.
* samsung,exynos_adc
- Unused error value dropped.
* sensiron,sgp30
- Drop use of %hx in favor of %x and letting the normal type conversion
work.
* sensortek,stk8312
- Add lowercase device id and note uppercase version deprecated.
- Drop ACPI id. Unlikely this one is in the wild and it isn't valid
ACPI naming.
* sprx,sc72xx_adc
- add MODULE_DEVICE_TABLE
* st,lsm6dsx
- Fix docs of valid ODRs
* st,sensors
- dt-binding rework. Two efforts on this crossed in a previous cycle
so this update cherry picks the best of the two yaml conversions.
- Don't copy the channel spec array as now ext_info is no longer modified.
* st,stm32-adc
- tidy up some docs that were marked as kernel-doc but aren't.
* ti,adc081c, ti,adc0832, ti,adc108s102 and ti,adc161s626
- Convert remainder of probe() functions to devm_ managed functions
to simplify error handing and remove paths.

* tag 'iio-for-5.14a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (171 commits)
i2c: core: Add stub for i2c_verify_client() if !CONFIG_I2C
iio: adis: Cleanout unused headers
iio: accel: bma180: Add missing 500 Hz / 1000 Hz bandwidth
counter: Add support for Intel Quadrature Encoder Peripheral
staging: iio: cdc: ad7746: extract capac setup to own function
staging: iio: cdc: ad7746: clean up probe return
staging: iio: cdc: ad7746: remove ordinary comments
iio: adc: ti-adc161s626: Use devm managed functions for all of probe.
iio: adc: ti-adc108s102: Use devm managed functions for all of probe()
iio: adc: ti-adc0832: Use devm managed functions for all of probe()
iio: adc: ti-adc081c: Use devm managed functions for all of probe()
iio: adc: max1118: Avoid jumping back and forth between spi and iio structures
iio: adc: max1118: Use devm_ managed functions for all of probe
iio: adc: max11100: Use devm_ functions for rest of probe()
iio: adc: max11100: Use get_unaligned_be16() rather than opencoding.
iio: chemical: sgp30: Drop use of %hx in format string.
iio: gyro: st_gyro: Support mount matrix
iio: magnetometer: st_magn: Support mount matrix
iio: accel: st_sensors: Stop copying channels
iio: accel: st_sensors: Support generic mounting matrix
...

show more ...