spi: Merge up fixes from Linus' tree

Gets us pine64plus back if nothing else.

regulator: Merge up fixes from Linus' tree

Gets us pine64plus back if nothing else.

ASoC: Merge up fixes from Linus' tree

Gets us pine64plus back if nothing else.

regmap: Merge up fixes from Linus' tree

Gets us pine64plus back if nothing else.

Merge tag 'hwmon-for-v6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

- k10temp: Display negative temperatures for industrial pr

Merge tag 'hwmon-for-v6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

- k10temp: Display negative temperatures for industrial processors

- pmbus core: Fix deadlock, NULL pointer dereference, and chip enable
detection

- nct7802: Do not display PECI1 temperature if disabled

- nct6775: Fix IN scaling factors and feature detection for
NCT6798/6799

- oxp-sensors: Fix race condition during device attribute creation

- aquacomputer_d5next: Fix incorrect PWM value readout

* tag 'hwmon-for-v6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (k10temp) Enable AMD3255 Proc to show negative temperature
hwmon: (pmbus_core) Fix Deadlock in pmbus_regulator_get_status
hwmon: (pmbus_core) Fix NULL pointer dereference
hwmon: (pmbus_core) Fix pmbus_is_enabled()
hwmon: (nct7802) Fix for temp6 (PECI1) processed even if PECI1 disabled
hwmon: (nct6775) Fix IN scaling factors for 6798/6799
hwmon: (oxp-sensors) Move tt_toggle attribute to dev_groups
hwmon: (aquacomputer_d5next) Fix incorrect PWM value readout
hwmon: (nct6775) Fix register for nct6799

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.5-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v6.4' into next

Sync up with mainline to bring in updates to shared infrastructure.

ASoC: Merge v6.5-rc2

Get a similar baseline to my other branches, and fixes for people using
the branch.

hwmon: (aquacomputer_d5next) Fix incorrect PWM value readout

Commit 662d20b3a5af ("hwmon: (aquacomputer_d5next) Add support for
temperature sensor offsets") changed aqc_get_ctrl_val() to return
the

hwmon: (aquacomputer_d5next) Fix incorrect PWM value readout

Commit 662d20b3a5af ("hwmon: (aquacomputer_d5next) Add support for
temperature sensor offsets") changed aqc_get_ctrl_val() to return
the value through a parameter instead of through the return value,
but didn't fix up a case that relied on the old behavior. Fix it
to use the proper received value and not the return code.

Fixes: 662d20b3a5af ("hwmon: (aquacomputer_d5next) Add support for temperature sensor offsets")
Cc: stable@vger.kernel.org
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20230714120712.16721-1-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

show more ...

Merge v6.5-rc1 into drm-misc-fixes

Boris needs 6.5-rc1 in drm-misc-fixes to prevent a conflict.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'master' into mm-hotfixes-stable

Merge tag 'hwmon-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
"New drivers:

- Driver for MAX31827

- Driver to suppo

Merge tag 'hwmon-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
"New drivers:

- Driver for MAX31827

- Driver to support HP WMI Sensors

Added support to existing drivers:

- aht10: Support for AHT20

- aquacomputer_d5next: Support for Aquacomputer Leakshield

- asus-ec-sensors: Support for ROG Crosshair X670E Hero

- corsair-psu: Cleanups and support for series 2022 and 2023

- it87: Various improvements and support for IT8732F

- nct6683: Support customer ID of some MSI boards.

- nct6755: Support for NCT6799D

- oxp-sensors: Various cleanups; support for AYANEO 2, Geek, OXP
Mini, and AOKZOE A1 PRO

- pmbus/max16601: Support for new revisions of MAX16508

- pmbus/adm1275: Disable ADC while updating PMON_CONFIG, and fix
problems with temperature monitoring on ADM1272

- sht3x: Various cleanups; support for medium repeatability

Other notable changes:

- Switched regmap drivers to Maple tree support where appropriate

Various other minor fixes and improvements"

* tag 'hwmon-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (54 commits)
hwmon: max31827: Switch back to use struct i2c_driver::probe
hwmon: (oxp-sensors) Add support for AOKZOE A1 PRO
hwmon: (corsair-psu) update Series 2022 and 2023 support
hwmon: (corsair-psu) various cleanups
hwmon: (corsair-psu) add support for reading PWM values and mode
hwmon: (pmbus/adm1275) Disable ADC while updating PMON_CONFIG
hwmon: (pmbus/adm1275) Prepare for protected write to PMON_CONFIG
hwmon: (oxp-sensors) Simplify logic of error return
hwmon: (oxp-sensors) Remove unused header
hwmon: (nct6755) Add support for NCT6799D
hwmon: (oxp-sensors) Add tt_toggle attribute on supported boards
hwmon: (sht3x) complement sysfs interface for sts3x
hwmon: (sht3x) Add new non-stardard sysfs attribute
hwmon: (sht3x) add medium repeatability support
hwmon: (sht3x)replace "high-precision" property to "repeatability"
hwmon: (sht3x) remove blocking_io property
hwmon: (sht3x) remove sht3x_platform_data
hwmon: (pmbus/max16601) Add support for new revisions of MAX16508
Documentation/hwmon: Fix description of devm_hwmon_device_unregister()
hwmon: (tmp464) Use maple tree register cache
...

show more ...

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to sync drm-misc-next-fixes with drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patche

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patches depend on these helpers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

hwmon: (aquacomputer_d5next) Add support for Aquacomputer Leakshield

Extend aquacomputer_d5next driver to expose various hardware sensors of the
Aquacomputer Leakshield leak prevention system, which

hwmon: (aquacomputer_d5next) Add support for Aquacomputer Leakshield

Extend aquacomputer_d5next driver to expose various hardware sensors of the
Aquacomputer Leakshield leak prevention system, which communicates
through a proprietary USB HID protocol. Implemented by Noah Bergbauer [1].

Two temperature sensors are exposed, along with pressure (current, min, max
and target), reservoir volume (total and filled), pump speed and flow. Pump
speed and flow values are user provided and allow the Leakshield to
optimize its operation. Writing them to the device is subject of future
patches.

[1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/41

Originally-from: Noah Bergbauer <main@ehvag.de>
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20230520095447.509287-3-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

show more ...

hwmon: (aquacomputer_d5next) Rename AQC_TEMP_SENSOR_DISCONNECTED

Rename the macro in question to AQC_SENSOR_NA because
more than just temperature sensors use this value to
indicate that they don't h

hwmon: (aquacomputer_d5next) Rename AQC_TEMP_SENSOR_DISCONNECTED

Rename the macro in question to AQC_SENSOR_NA because
more than just temperature sensors use this value to
indicate that they don't have a reading. Implemented by
Noah Bergbauer [1].

[1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/41

Originally-from: Noah Bergbauer <main@ehvag.de>
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20230520095447.509287-2-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

show more ...

Merge tag 'v6.4-rc4' into wpan-next/staging

Linux 6.4-rc4

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Backmerge to get some hwmon dependencies.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-fixes into drm-misc-fixes

Let's bring 6.4-rc1 in drm-misc-fixes to start the new fix cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge drm/drm-next into drm-misc-next

Start the 6.5 release cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge branch 'next' into for-linus

Prepare input updates for 6.4 merge window.

Merge branch 'for-6.4/amd-sfh' into for-linus

- assorted functional fixes for amd-sfh driver (Basavaraj Natikar)

Merge tag 'hwmon-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
"New drivers

- Driver for Acbel FSB032 power supply

-

Merge tag 'hwmon-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
"New drivers

- Driver for Acbel FSB032 power supply

- Driver for StarFive JH71x0 temperature sensor

Added support to existing drivers:

- aquacomputer_d5next: Support for Aquacomputer Aquastream XT

- nct6775: Added various ASUS boards to list of boards supporting WMI

- asus-ec-sensors: ROG STRIX Z390-F GAMING, ProArt B550-Creator,

Notable improvements:

- Regulator event and sysfs notification support for PMBus drivers

Notable cleanup:

- Constified pointers to hwmon_channel_info

.. and various other minor bug fixes and improvements"

* tag 'hwmon-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (131 commits)
hwmon: lochnagar: Remove the unneeded include <linux/i2c.h>
hwmon: (pmbus/fsp-3y) Fix functionality bitmask in FSP-3Y YM-2151E
hwmon: (adt7475) Use device_property APIs when configuring polarity
hwmon: (aquacomputer_d5next) Add support for Aquacomputer Aquastream XT
hwmon: (it87) Disable/enable SMBus access for IT8622E chipset
hwmon: (it87) Add calls to smbus_enable/smbus_disable as required
hwmon: (it87) Test for error in it87_update_device
hwmon: (it87) Disable SMBus access for environmental controller registers.
docs: hwmon: Add documentaion for acbel-fsg032 PSU
hwmon: (pmbus/acbel-fsg032) Add Acbel power supply
dt-bindings: trivial-devices: Add acbel,fsg032
dt-bindings: vendor-prefixes: Add prefix for acbel
hwmon: (sfctemp) Simplify error message
hwmon: (pmbus/ibm-cffps) Use default debugfs attributes and lock function
hwmon: (pmbus/core) Add lock and unlock functions
hwmon: (pmbus/core) Request threaded interrupt with IRQF_ONESHOT
hwmon: (nct6775) update ASUS WMI monitoring list A620/B760/W790
hwmon: ina2xx: add optional regulator support
dt-bindings: hwmon: ina2xx: add supply property
dt-bindings: hwmon: pwm-fan: Convert to DT schema
...

show more ...

hwmon: (aquacomputer_d5next) Add support for Aquacomputer Aquastream XT

Extend aquacomputer_d5next driver to expose various hardware sensors of the
Aquacomputer Aquastream XT watercooling pump, whic

hwmon: (aquacomputer_d5next) Add support for Aquacomputer Aquastream XT

Extend aquacomputer_d5next driver to expose various hardware sensors of the
Aquacomputer Aquastream XT watercooling pump, which communicates
through a proprietary USB HID protocol. Implemented by Leonard Anderweit
[1] [2].

Coolant temp, fan IC and external temp sensor readings are available, along
with speed and voltage of both the pump and optionally connected fan.
It also exposes pump current.

Additionally, serial number and firmware version are exposed through
debugfs.

[1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/46
[2] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/49

Originally-from: Leonard Anderweit <leonard.anderweit@gmail.com>
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20230416181702.9892-1-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

show more ...