Merge v4.4-rc1 into MTD development

Sync up with the upstream development.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>

Merge branch 'x15-audio-fixes' into omap-for-v4.4/fixes

Merge tag 'gpio-v4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
"Here is the bulk of GPIO changes for the v4.4 development cycle.

Merge tag 'gpio-v4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
"Here is the bulk of GPIO changes for the v4.4 development cycle.

The only changes hitting outside drivers/gpio are in the pin control
subsystem and these seem to have settled nicely in linux-next.

Development mistakes and catfights are nicely documented in the
reverts as you can see. The outcome of the ABI fight is that we're
working on a chardev ABI for GPIO now, where hope to show results for
the v4.5 kernel.

Summary of changes:

GPIO core:
- Define and handle flags for open drain/open collector and open
source/open emitter, also know as "single-ended" configurations.
- Generic request/free operations that handle calling out to the
(optional) pin control backend.
- Some refactoring related to an ABI change that did not happen, yet
provide useful.
- Added a real-time compliance checklist. Many GPIO chips have
irqchips, and need to think this over with the RT patches going
upstream.
- Restructure, fix and clean up Kconfig menus a bit.

New drivers:
- New driver for AMD Promony.
- New driver for ACCES 104-IDIO-16, a port-mapped I/O card,
ISA-style. Very retro.

Subdriver changes:
- OMAP changes to handle real time requirements.
- Handle trigger types for edge and level IRQs on PL061 properly. As
this hardware is very common it needs to set a proper example for
others to follow.
- Some container_of() cleanups.
- Delete the unused MSM driver in favor of the driver that is
embedded inside the pin control driver.
- Cleanup of the ath79 GPIO driver used by many, many OpenWRT router
targets.
- A consolidated IT87xx driver replacing the earlier very specific
IT8761e driver.
- Handle the TI TCA9539 in the PCA953x driver. Also handle ACPI
devices in this subdriver.
- Drop xilinx arch dependencies as these FPGAs seem to profilate over
a few different architectures. MIPS and ARM come to mind"

* tag 'gpio-v4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (57 commits)
gpio: fix up SPI submenu
gpio: drop surplus I2C dependencies
gpio: drop surplus X86 dependencies
gpio: dt-bindings: document the official use of "ngpios"
gpio: MAINTAINERS: Add an entry for the ATH79 GPIO driver
gpio / ACPI: Allow shared GPIO event to be read via operation region
gpio: group port-mapped I/O drivers in a menu
gpio: Add ACCES 104-IDIO-16 driver maintainer entry
gpio: zynq: Document interrupt-controller DT binding
gpio: xilinx: Drop architecture dependencies
gpio: generic: Revert to old error handling in bgpio_map
gpio: add a real time compliance notes
Revert "gpio: add a real time compliance checklist"
gpio: Add GPIO support for the ACCES 104-IDIO-16
gpio: driver for AMD Promontory
gpio: xlp: Convert to use gpiolib irqchip helpers
gpio: add a real time compliance checklist
gpio/xilinx: enable for MIPS
gpiolib: Add and use OF_GPIO_SINGLE_ENDED flag
gpiolib: Split GPIO flags parsing and GPIO configuration
...

show more ...

gpiolib: Split GPIO flags parsing and GPIO configuration

When requesting a GPIO through the legacy or the gpiod_* API the
gpiochip request operation is first called and then the GPIO flags are
parse

gpiolib: Split GPIO flags parsing and GPIO configuration

When requesting a GPIO through the legacy or the gpiod_* API the
gpiochip request operation is first called and then the GPIO flags are
parsed and the GPIO is configured. This prevents the gpiochip from
rejecting the request if the flags are not supported by the device.

To fix this split the parse-and-configure operation in two and parse
flags before requesting the GPIO.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

show more ...

Merge branch 'next' into for-linus

Prepare first round of input updates for 3.20.

Merge tag 'v3.19-rc4' into next

Merge with mainline to bring in the latest thermal and other changes.

Merge tag 'topic/i915-hda-componentized-2015-01-12' into drm-intel-next-queued

Conflicts:
drivers/gpu/drm/i915/intel_runtime_pm.c

Separate branch so that Takashi can also pull just this refactorin

Merge tag 'topic/i915-hda-componentized-2015-01-12' into drm-intel-next-queued

Conflicts:
drivers/gpu/drm/i915/intel_runtime_pm.c

Separate branch so that Takashi can also pull just this refactoring
into sound-next.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

show more ...

Merge tag 'irqchip-urgent-3.19' of git://git.infradead.org/users/jcooper/linux into irq/urgent

irqchip urgent fixes for v3.19 from Jason Cooper
- mtk-sysirq: Fix error handling
- hip04: Fix cpu ma

Merge tag 'irqchip-urgent-3.19' of git://git.infradead.org/users/jcooper/linux into irq/urgent

irqchip urgent fixes for v3.19 from Jason Cooper
- mtk-sysirq: Fix error handling
- hip04: Fix cpu map for 16bit value
- gic-v3-its: Clear a warning regarding decimal constants
- omap-intc: Fix legacy DMA regression
- atmel-aic-common: Retain priority when changing type

show more ...

Merge tag 'mvebu-fixes-3.19' of git://git.infradead.org/linux-mvebu into fixes

Pull "Fixes for 3.19" from Andrew Lunn:

Jason is taking a back seat this cycle and i'm doing all the patch
wrangling f

Merge tag 'mvebu-fixes-3.19' of git://git.infradead.org/linux-mvebu into fixes

Pull "Fixes for 3.19" from Andrew Lunn:

Jason is taking a back seat this cycle and i'm doing all the patch
wrangling for mvebu.

* tag 'mvebu-fixes-3.19' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: Fix pinctrl configuration for Armada 370 DB

Also update to Linux 3.19-rc1, which this was based on.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

Merge tag 'gpio-v3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull take two of the GPIO updates:
"Same stuff as last time, now with a fixup patch for the previous
co

Merge tag 'gpio-v3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull take two of the GPIO updates:
"Same stuff as last time, now with a fixup patch for the previous
compile error plus I ran a few extra rounds of compile-testing.

This is the bulk of GPIO changes for the v3.19 series:

- A new API that allows setting more than one GPIO at the time. This
is implemented for the new descriptor-based API only and makes it
possible to e.g. toggle a clock and data line at the same time, if
the hardware can do this with a single register write. Both
consumers and drivers need new calls, and the core will fall back
to driving individual lines where needed. Implemented for the
MPC8xxx driver initially

- Patched the mdio-mux-gpio and the serial mctrl driver that drives
modems to use the new multiple-setting API to set several signals
simultaneously

- Get rid of the global GPIO descriptor array, and instead allocate
descriptors dynamically for each GPIO on a certain GPIO chip. This
moves us closer to getting rid of the limitation of using the
global, static GPIO numberspace

- New driver and device tree bindings for 74xx ICs

- New driver and device tree bindings for the VF610 Vybrid

- Support the RCAR r8a7793 and r8a7794

- Guidelines for GPIO device tree bindings trying to get things a bit
more strict with the advent of combined device properties

- Suspend/resume support for the MVEBU driver

- A slew of minor fixes and improvements"

* tag 'gpio-v3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (33 commits)
gpio: mcp23s08: fix up compilation error
gpio: pl061: document gpio-ranges property for bindings file
gpio: pl061: hook request if gpio-ranges avaiable
gpio: mcp23s08: Add option to configure IRQ output polarity as active high
gpio: fix deferred probe detection for legacy API
serial: mctrl_gpio: use gpiod_set_array function
mdio-mux-gpio: Use GPIO descriptor interface and new gpiod_set_array function
gpio: remove const modifier from gpiod_get_direction()
gpio: remove gpio_descs global array
gpio: mxs: implement get_direction callback
gpio: em: Use dynamic allocation of GPIOs
gpio: Check if base is positive before calling gpio_is_valid()
gpio: mcp23s08: Add simple IRQ support for SPI devices
gpio: mcp23s08: request a shared interrupt
gpio: mcp23s08: Do not free unrequested interrupt
gpio: rcar: Add r8a7793 and r8a7794 support
gpio-mpc8xxx: add mpc8xxx_gpio_set_multiple function
gpiolib: allow simultaneous setting of multiple GPIO outputs
gpio: mvebu: add suspend/resume support
gpio: gpio-davinci: remove duplicate check on resource
..

show more ...

gpio: fix deferred probe detection for legacy API

Commit 14e85c0e69d5 ("gpio: remove gpio_descs global array") changed
gpio_to_desc()'s behavior to return NULL not only for GPIOs numbers
not in the

gpio: fix deferred probe detection for legacy API

Commit 14e85c0e69d5 ("gpio: remove gpio_descs global array") changed
gpio_to_desc()'s behavior to return NULL not only for GPIOs numbers
not in the valid range, but also for all GPIOs whose controller has not
been probed yet. Although this behavior is more correct (nothing hints
that these GPIO numbers will be populated later), this affects
gpio_request() and gpio_request_one() which call gpiod_request() with a
NULL descriptor, causing it to return -EINVAL instead of the expected
-EPROBE_DEFER for a non-probed GPIO.

gpiod_request() is only called with a descriptor obtained from
gpio_to_desc() from these two functions, so address the issue there.

Other ways to obtain GPIOs rely on well-defined mappings and can thus
return -EPROBE_DEFER only for relevant GPIOs, and are thus not affected
by this issue.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

show more ...

Merge Linus' tree to be be to apply submitted patches to newer code than
current trivial.git base

Merge commit 'v3.17' into next

Merge tag 'v3.18-rc4' into x86/cleanups, to refresh the tree before pulling new changes.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branches 'for-3.18/always-poll-quirk', 'for-3.18/logitech', 'for-3.18/picolcd', 'for-3.18/rmi', 'for-3.18/sony', 'for-3.18/uhid', 'for-3.18/upstream' and 'for-3.18/wacom' into for-linus

Merge branch 'next' into for-linus

Prepare first round of input updates for 3.18.

Merge tag 'irqchip-core-3.18' of git://git.infradead.org/users/jcooper/linux into irq/core

irqchip core changes for v3.18

- renesas: suspend to RAM, runtime PM, cleanups and DT binding docs
- key

Merge tag 'irqchip-core-3.18' of git://git.infradead.org/users/jcooper/linux into irq/core

irqchip core changes for v3.18

- renesas: suspend to RAM, runtime PM, cleanups and DT binding docs
- keystone: add new driver
- hip04: add Hisilicon HiP04 driver (without touching irq-gic.c)
- gic: Use defines instead of magic number, preserve v2 bybass bits
- handle_domain_irq: common low level interrupt entry handler

show more ...

Merge remote-tracking branch 'airlied/drm-next' into topic/vblank-rework

Dave asked me to do the backmerge before sending him the revised pull
request, so here we go. Nothing fancy in the conflicts,

Merge remote-tracking branch 'airlied/drm-next' into topic/vblank-rework

Dave asked me to do the backmerge before sending him the revised pull
request, so here we go. Nothing fancy in the conflicts, just a few
things changed right next to each another.

Conflicts:
drivers/gpu/drm/drm_irq.c

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

show more ...

Merge tag 'v3.17-rc4' into sched/core, to prevent conflicts with upcoming patches, and to refresh the tree

Linux 3.17-rc4

Merge tag 'v3.17-rc3' into next

Sync with mainline to bring in Chrome EC changes.

Merge tag 'asoc-v3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v3.17

A few more driver specific fixes on top of the currently pending fixes

Merge tag 'asoc-v3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v3.17

A few more driver specific fixes on top of the currently pending fixes
(which are already in your tree but not Linus').

show more ...

Merge branch 'linus' into perf/core, to fix conflicts

Conflicts:
arch/x86/kernel/cpu/perf_event_intel_uncore*.c

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'efi-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into x86/urgent

Pull EFI fixes from Matt Fleming:

* WARN_ON(!spin_is_locked()) always triggers on non-SMP machi

Merge tag 'efi-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into x86/urgent

Pull EFI fixes from Matt Fleming:

* WARN_ON(!spin_is_locked()) always triggers on non-SMP machines.
Swap it for the more canonical lockdep_assert_held() which always
does the right thing - Guenter Roeck

* Assign the correct value to efi.runtime_version on arm64 so that all
the runtime services can be invoked - Semen Protsenko

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge tag 'v3.17-rc1' into patchwork

Linux 3.17-rc1

Merge l2-mtd/next into l2-mtd/master