Merge branch 'next' into for-linus

Prepare first round of input updates for 4.3 merge window.

Merge branch 'x86/urgent' into core/efi, to pick up a pending EFI fix

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge remote-tracking branch 'net-next/master' into mac80211-next

Merge net-next to get some driver changes that patches depend
on (in order to avoid conflicts).

Signed-off-by: Johannes Berg <johan

Merge remote-tracking branch 'net-next/master' into mac80211-next

Merge net-next to get some driver changes that patches depend
on (in order to avoid conflicts).

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

Merge remote-tracking branch 'asoc/fix/rt5645' into asoc-fix-rt5645

Merge branch 'for-4.3-rc/ti-clk-fixes' of https://github.com/t-kristo/linux-pm into clk-fixes

Pull fixes from Tero Kristo:

"A few TI clock driver fixes to pull against 4.3-rc"

* 'for-4.3-rc/ti-clk

Merge branch 'for-4.3-rc/ti-clk-fixes' of https://github.com/t-kristo/linux-pm into clk-fixes

Pull fixes from Tero Kristo:

"A few TI clock driver fixes to pull against 4.3-rc"

* 'for-4.3-rc/ti-clk-fixes' of https://github.com/t-kristo/linux-pm: (3 commits)
clk: ti: dflt: fix enable_reg validity check
clk: ti: fix dual-registration of uart4_ick
clk: ti: clk-7xx: Remove hardwired ABE clock configuration

show more ...

Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next

Backmerge to catch up with 4.3. slightly more involved conflict in the
irq code, but nothing beyond adjacent changes.

Signed-off-

Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next

Backmerge to catch up with 4.3. slightly more involved conflict in the
irq code, but nothing beyond adjacent changes.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

show more ...

Merge tag 'v4.3-rc3' into next

Merge with Linux 4.3-rc3 to bring in MFD DA9062 changes to merge DA9062
OnKey driver.

Merge tag 'v4.3-rc2' into k.o/for-4.3-v1

Linux 4.3-rc2

Merge tag 'v4.3-rc2' into topic/drm-misc

Backmerge Linux 4.3-rc2 because of conflicts in the dp helper code
between bugfixes and new code. Just adjacent lines really.

On top of that there's a silen

Merge tag 'v4.3-rc2' into topic/drm-misc

Backmerge Linux 4.3-rc2 because of conflicts in the dp helper code
between bugfixes and new code. Just adjacent lines really.

On top of that there's a silent conflict in the new fsl-dcu driver
merged into 4.3 and

commit 844f9111f6f54f88eb2f0fac121b82ce77193866
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date: Wed Sep 2 10:42:40 2015 +0200

drm/atomic: Make prepare_fb/cleanup_fb only take state, v3.

which Thierry Reding spotted and provided a fixup for.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

show more ...

Merge branch 'for-linus' into for-next

Merge tag 'v4.3-rc1' into spi-fix-doc

Linux 4.3-rc1

Merge branch 'fixes-rc1' into omap-for-v4.3/fixes

Merge tag 'v4.3-rc1' into MTD -next development

Merge tag 'v4.3-rc1' into patchwork

Linux 4.3-rc1

* tag 'v4.3-rc1': (11838 commits)
Linux 4.3-rc1
blk: rq_data_dir() should not return a boolean
writeback: plug writeback in wb_writeback() an

Merge tag 'v4.3-rc1' into patchwork

Linux 4.3-rc1

* tag 'v4.3-rc1': (11838 commits)
Linux 4.3-rc1
blk: rq_data_dir() should not return a boolean
writeback: plug writeback in wb_writeback() and writeback_inodes_wb()
thermal: fix intel PCH thermal driver mismerge
ARCv2: [axs103_smp] Reduce clk for SMP FPGA configs
revert "ocfs2/dlm: use list_for_each_entry instead of list_for_each"
mm/early_ioremap: add explicit #include of asm/early_ioremap.h
fs/seq_file: convert int seq_vprint/seq_printf/etc... returns to void
selftests: enhance membarrier syscall test
selftests: add membarrier syscall test
sys_membarrier(): system-wide memory barrier (generic, x86)
MODSIGN: fix a compilation warning in extract-cert
Revert "writeback: plug writeback at a high level"
scsi_dh: fix randconfig build error
target: use stringify.h instead of own definition
target/user: Fix UFLAG_UNKNOWN_OP handling
target: Remove no-op conditional
target/user: Remove unused variable
target: Fix max_cmd_sn increment w/o cmdsn mutex regressions
target: Attach EXTENDED_COPY local I/O descriptors to xcopy_pt_sess
...

show more ...

Merge tag 'v4.3-rc1' into perf/core, to refresh the tree

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'v4.3-rc1' into locking/core, to refresh the tree

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'v4.3-rc1' into sched/core, to refresh the branch

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'gpio-v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v4.3 kernel cycle.

Ther

Merge tag 'gpio-v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v4.3 kernel cycle.

There is quite a lot going on in the GPIO subsystem this merge window,
so the main matter is decribed below.

The hits in other subsystems when making the GPIO flags optional are
all ACKed by their respective subsystem maintainers.

Core changes:

- Root out the wrapper devm_gpiod_get() and gpiod_get() etc versions
of the descriptor calls that did not use the flags argument on the
end. This was around for too long and eventually Uwe Kleine-König
took the time to clean it out and the last users are removed along
with the macros in this tag. In several cases the use of flags
simplifies the code. For this reason we have (ACKed) patches
hitting in DRM, IIO, media, NFC, USB+PHY up until we hammer in the
nail with removing the macros.

- Add a fat document describing how much ready-made GPIO stuff we
have i the kernel to discourage people from reinventing a square
wheel in userspace, as so often happens.

- Create a separate lockdep class for each instance of a GPIO IRQ
chip instead of using one class for all chips, as the current code
will not work with systems with several GPIO chips doing lockdep
debugging.

- Protect against driver unloading also when a GPIO line is only used
as IRQ for the GPIOLIB_IRQCHIP helpers.

- If the GPIO chip has no designated owner, assign the parent device
driver owner as owner.

- Consolidation of chained IRQ handler install/remove replacing all
call sites where irq_set_handler_data() and
irq_set_chained_handler() were done in succession with a combined
call to irq_set_chained_handler_and_data().

This series was created by Thomas Gleixner after the problem was
observed by Russell King.

- Tglx also made another series of patches switching
__irq_set_handler_locked() for irq_set_handler_locked() which is
way cleaner.

- Tglx and Jiang Liu wrote a good bunch of patches to make use of
irq_desc_get_xxx() accessors and avoid looking up irq_descs from
IRQ numbers. The goal is to get rid of the irq number from the
handlers in the IRQ flow which is nice.

- Rob Herring killed off the set_irq_flags() for all GPIO drivers.
This was an ARM specific function that is replaced with the generic
irq_modify_status() where special flags are actually needed.

- When an OF node has a pin range for its GPIOs, return -EPROBE_DEFER
if the pin controller isn't available. Pretty logical, yet needed
to be fixed.

- If a driver using GPIOLIB_IRQCHIP has its own irq_*_resources call
back, then call these instead of the defaults provided by the
GPIOLIB.

- Fix an undocumented ABI hole: named GPIOs were not properly
documented.

Driver improvements:

- Add get_direction() support to the generic GPIO driver, it's
strange that we didn't have that before.

- Make it possible to have input-only GPIO chips using the generic
GPIO driver.

- Clean out platform data support from the Emma Mobile (EM) driver

- Finegrained runtime PM support for the RCAR driver.

- Support r8a7795 (R-car H3) in the RCAR driver.

- Support interrupts on GPIOs 16 thru 31 in the DaVinci driver.

- Some consolidation and new support in the MPC8xxx driver, we now
support MPC5125.

- Preempt-RT-friendly patches: the OMAP, MPC8xxx, drivers uses raw
spinlocks making it work better with the realime patches.

- Interrupt support for the EXTRAXFS GPIO driver.

- Make the ETRAXFS GPIO driver support also ARTPEC-3.

- Interrupt and wakeup support for the BRCMSTB driver, also for
wakeup from S5 cold boot.

- Mask MXC IRQs during suspend.

- Improve OMAP2 GPIO set_debounce() to work according to spec.

- The VF610 driver handles IRQs properly.

New drivers:

- ZTE ZX GPIO driver"

* tag 'gpio-v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (87 commits)
Revert "gpio: extraxfs: fix returnvar.cocci warnings"
gpio: tc3589x: use static container helper
gpio: xlp: fix error return code
gpio: vf610: handle level IRQ's properly
gpio: max732x: Fix error handling in probe()
gpio: omap: fix clk_prepare/unprepare usage
gpio: omap: protect regs access in omap_gpio_irq_handler
gpio: omap: fix omap2_set_gpio_debounce
gpio: omap: switch to use platform_get_irq
gpio: omap: remove wrong irq_domain_remove usage in probe
gpiolib: add description for gpio irqchip fields in struct gpio_chip
gpio: extraxfs: fix returnvar.cocci warnings
gpiolib: irqchip: use different lockdep class for each gpio irqchip
gpio/grgpio: fix deadlock in grgpio_irq_unmap()
Documentation: gpio: consumer: describe active low property
gpio: mxc: fix section mismatch warning
gpio/mxc: mask gpio interrupts in suspend
gpio: omap: Fix missing raw locks conversion
gpio: brcmstb: support wakeup from S5 cold boot
gpio: brcmstb: Add interrupt and wakeup source support
...

show more ...

Merge branch 'next' into for-linus

Prepare first round of input updates for 4.3 merge window.

Merge branch 'for-4.3/gembird' into for-linus

Merge tag 'v4.2-rc8' into x86/mm, before applying new changes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

gpio/grgpio: fix deadlock in grgpio_irq_unmap()

As reported by Alexey Khoroshilov:

grgpio_irq_unmap() code looks quite suspicious regarding usage of
priv->bgc.lock spinlock.

It locks t

gpio/grgpio: fix deadlock in grgpio_irq_unmap()

As reported by Alexey Khoroshilov:

grgpio_irq_unmap() code looks quite suspicious regarding usage of
priv->bgc.lock spinlock.

It locks the spinlock in line 310:

spin_lock_irqsave(&priv->bgc.lock, flags);

and then it can call grgpio_set_imask() in line 317:

grgpio_set_imask(priv, i, 0);

But grgpio_set_imask() unconditionally locks the spinlock by itself.

Fix this by moving the spinlock acquisition outside of
grgpio_set_imask().

Found by Linux Driver Verification project (linuxtesting.org).

Reported-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

show more ...

Merge tag 'mac80211-next-for-davem-2015-08-14' into next

Another pull request for the next cycle, this time with quite
a bit of content:
* mesh fixes/improvements from Alexis, Bob, Chun-Yeow and Je

Merge tag 'mac80211-next-for-davem-2015-08-14' into next

Another pull request for the next cycle, this time with quite
a bit of content:
* mesh fixes/improvements from Alexis, Bob, Chun-Yeow and Jesse
* TDLS higher bandwidth support (Arik)
* OCB fixes from Bertold Van den Bergh
* suspend/resume fixes from Eliad
* dynamic SMPS support for minstrel-HT (Krishna Chaitanya)
* VHT bitrate mask support (Lorenzo Bianconi)
* better regulatory support for 5/10 MHz channels (Matthias May)
* basic support for MU-MIMO to avoid the multi-vif issue (Sara Sharon)
along with a number of other cleanups.

show more ...

gpio: kill off set_irq_flags usage

set_irq_flags is ARM specific with custom flags which have genirq
equivalents. Convert drivers to use the genirq interfaces directly, so we
can kill off set_irq_fl

gpio: kill off set_irq_flags usage

set_irq_flags is ARM specific with custom flags which have genirq
equivalents. Convert drivers to use the genirq interfaces directly, so we
can kill off set_irq_flags. The translation of flags is as follows:

IRQF_VALID -> !IRQ_NOREQUEST
IRQF_PROBE -> !IRQ_NOPROBE
IRQF_NOAUTOEN -> IRQ_NOAUTOEN

For IRQs managed by an irqdomain, the irqdomain core code handles clearing
and setting IRQ_NOREQUEST already, so there is no need to do this in
.map() functions and we can simply remove the set_irq_flags calls. Some
users also modify IRQ_NOPROBE and this has been maintained although it
is not clear that is really needed as most platforms don't use probing.
There appears to be a great deal of blind copy and paste of this code.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: linux-gpio@vger.kernel.org
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

show more ...

Merge branch 'for-linus' into for-next

... to make easier developing HDA ext code.