Merge branch 'next/cleanup-samsung-macro' into next/cleanup-samsung

Merge tag 'regmap-3.4' into regmap-stride

regmap: Last minute bug fix for 3.4

This is a last minute bug fix that was only just noticed since the code
path that's being exercised here is one that is

Merge tag 'regmap-3.4' into regmap-stride

regmap: Last minute bug fix for 3.4

This is a last minute bug fix that was only just noticed since the code
path that's being exercised here is one that is fairly rarely used. The
changelog for the change itself is extremely clear and the code itself
is obvious to inspection so should be pretty safe.

Conflicts:
drivers/base/regmap/regmap.c (overlap between the fix and stride code)

show more ...

Merge branch 'imx/pinctrl/for-3.5' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/pinctrl

* 'imx/pinctrl/for-3.5' of git://git.linaro.org/people/shawnguo/linux-2.6: (290 commits)
ARM:

Merge branch 'imx/pinctrl/for-3.5' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/pinctrl

* 'imx/pinctrl/for-3.5' of git://git.linaro.org/people/shawnguo/linux-2.6: (290 commits)
ARM: mxs: enable pinctrl support
video: mxsfb: adopt pinctrl support
ASoC: mxs-saif: adopt pinctrl support
i2c: mxs: adopt pinctrl support
mtd: nand: gpmi: adopt pinctrl support
mmc: mxs-mmc: adopt pinctrl support
serial: mxs-auart: adopt pinctrl support
serial: amba-pl011: adopt pinctrl support
spi/imx: adopt pinctrl support
i2c: imx: adopt pinctrl support
can: flexcan: adopt pinctrl support
net: fec: adopt pinctrl support
tty: serial: imx: adopt pinctrl support
mmc: sdhci-imx-esdhc: adopt pinctrl support
ARM: imx6q: switch to use pinctrl subsystem
ARM: mxs: enable pinctrl dummy states
ARM: imx: enable pinctrl dummy states
+3.4-rc5 update

show more ...

Merge branch 'clk/mxs' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/clock

Shawn Guo <shawn.guo@linaro.org> writes:

mxs common clk porting for v3.5. It depends on the following two

Merge branch 'clk/mxs' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/clock

Shawn Guo <shawn.guo@linaro.org> writes:

mxs common clk porting for v3.5. It depends on the following two branches.

[1] git://git.linaro.org/people/mturquette/linux.git clk-next
[2] http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-arm.git clkdev

As the mxs device tree conversion will constantly touch clock files,
to save the conflicts, the updated mxs/dt branch coming later will
based on this pull-request.

* 'clk/mxs' of git://git.linaro.org/people/shawnguo/linux-2.6:
ARM: mxs: remove now unused timer_clk argument from mxs_timer_init
ARM: mxs: remove old clock support
ARM: mxs: switch to common clk framework
ARM: mxs: change the lookup name for fec phy clock
ARM: mxs: request clock for timer
clk: mxs: add clock support for imx28
clk: mxs: add clock support for imx23
clk: mxs: add mxs specific clocks

Includes an update to Linux 3.4-rc6

Conflicts:
drivers/clk/Makefile

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

Merge tag 'omap-board-for-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/boards

Board specific changes for omap.

Note that these are based on omap-pm-regulator-f

Merge tag 'omap-board-for-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/boards

Board specific changes for omap.

Note that these are based on omap-pm-regulator-for-v3.5 as
both branches are adding twl regulators.

By Paul Gortmaker (8) and others
via Linus Torvalds (38) and others
* tag 'omap-board-for-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
OMAP: omap4panda: Use common configuration for V1V8, V2V1 supplies
OMAP: 4430SDP: Use common configuration for V1V8, V2V1 supplies
OMAP4: twl-common: Add twl6030 V1V8, V2V1 SMPS common configuration
ARM: OMAP: Mark Beagleboard-xM MMC bus as 4-bit
Add MSUB support for the LogicPD OMAP3530 DevKits
ARM: OMAP: rx51: Platform support for lis3lv02d accelerometer
ARM: OMAP2+: craneboard: register emac device
ARM: OMAP4: board-omap4panda: Register platform device for HDMI audio codec
ARM: OMAP4: board-4430sdp: Register platform device for HDMI audio codec
ARM: OMAP: devices: Register platform devices for HDMI audio
ARM: OMAP3: igep0020: Add support for Micron NAND Flash storage memory
ARM: OMAP2+: nand: Make board_onenand_init() visible to board code
ARM: OMAP3: cm-t35: add support for power off
ARM: OMAP: WiLink platform data for the PandaBoard
ARM: OMAP2PLUS: Enable HIGHMEM
ARM: OMAP: omap2plus_defconfig: Enable ehci-omap and sms95xx support

Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

Merge tag 'v3.5-soc' of git://gitorious.org/linux-davinci/linux-davinci into next/drivers

DaVinci SoC updates for v3.5

This pull request updates the DaVinci SoC support to implement DEBUG_LL port
c

Merge tag 'v3.5-soc' of git://gitorious.org/linux-davinci/linux-davinci into next/drivers

DaVinci SoC updates for v3.5

This pull request updates the DaVinci SoC support to implement DEBUG_LL port
choice and optimizes the DMA ISR by removing unnecessary register reads.

* tag 'v3.5-soc' of git://gitorious.org/linux-davinci/linux-davinci:
ARM: davinci: optimize the DMA ISR
ARM: davinci: implement DEBUG_LL port choice
+ sync with Linux 3.4-rc6

Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

Merge branch 'sh/rsk-updates' into sh-latest

Conflicts:
arch/sh/Kconfig

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Merge tag 'v3.4-rc6' into spi/next

Linux 3.4-rc6

Merge branch 'fixes-non-critical' into cleanup-devices

Merge tag 'v3.4-rc6' into next/cleanup

Linux 3.4-rc6

Resolve conflict where an u5500 file had a bugfix go in, but was
deleted in the branch staged for next merge window.

Signed-off-by: Olof Johans

Merge tag 'v3.4-rc6' into next/cleanup

Linux 3.4-rc6

Resolve conflict where an u5500 file had a bugfix go in, but was
deleted in the branch staged for next merge window.

Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

Merge tag 'v3.4-rc6' into gpio/next

Linux 3.4-rc6

Merge branch 'smp/threadalloc' into smp/hotplug

Reason: Pull in the separate branch which was created so arch/tile can
base further work on it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Merge remote-tracking branch 'airlied/drm-core-next' into drm-intel-next-queued

Backmerge of drm-next to resolve a few ugly conflicts and to get a few
fixes from 3.4-rc6 (which drm-next has already

Merge remote-tracking branch 'airlied/drm-core-next' into drm-intel-next-queued

Backmerge of drm-next to resolve a few ugly conflicts and to get a few
fixes from 3.4-rc6 (which drm-next has already merged). Note that this
merge also restricts the stencil cache lra evict policy workaround to
snb (as it should) - I had to frob the code anyway because the
CM0_MASK_SHIFT define died in the masked bit cleanups.

We need the backmerge to get Paulo Zanoni's infoframe regression fix
for gm45 - further bugfixes from him touch the same area and would
needlessly conflict.

Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

show more ...

Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux into drm-next

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Conflicts:
drivers/net/ethernet/intel/e1000e/param.c
drivers/net/wireless/iwlwifi/iwl-agn-rx.c
drivers/net/wireless/iwlwifi/iwl-trans

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Conflicts:
drivers/net/ethernet/intel/e1000e/param.c
drivers/net/wireless/iwlwifi/iwl-agn-rx.c
drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c
drivers/net/wireless/iwlwifi/iwl-trans.h

Resolved the iwlwifi conflict with mainline using 3-way diff posted
by John Linville and Stephen Rothwell. In 'net' we added a bug
fix to make iwlwifi report a more accurate skb->truesize but this
conflicted with RX path changes that happened meanwhile in net-next.

In e1000e a conflict arose in the validation code for settings of
adapter->itr. 'net-next' had more sophisticated logic so that
logic was used.

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge 3.4-rc6 into usb-next

This resolves the conflict with:
drivers/usb/host/ehci-tegra.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge branch 'for-airlied' of git://people.freedesktop.org/~danvet/drm-intel into drm-core-next

Daniel prepared this branch with a back-merge as git was getting
very confused about changes in intel_

Merge branch 'for-airlied' of git://people.freedesktop.org/~danvet/drm-intel into drm-core-next

Daniel prepared this branch with a back-merge as git was getting
very confused about changes in intel_display.c

show more ...

Merge branch 'linus' into sched/core

Merge reason: We were on a pretty old base, refresh before moving on.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'v3.4-rc6' into drm-intel-next

Conflicts:
drivers/gpu/drm/i915/intel_display.c

Ok, this is a fun story of git totally messing things up. There
/shouldn't/ be any conflict in here, becaus

Merge tag 'v3.4-rc6' into drm-intel-next

Conflicts:
drivers/gpu/drm/i915/intel_display.c

Ok, this is a fun story of git totally messing things up. There
/shouldn't/ be any conflict in here, because the fixes in -rc6 do only
touch functions that have not been changed in -next.

The offending commits in drm-next are 14415745b2..1fa611065 which
simply move a few functions from intel_display.c to intel_pm.c. The
problem seems to be that git diff gets completely confused:

$ git diff 14415745b2..1fa611065

is a nice mess in intel_display.c, and the diff leaks into totally
unrelated functions, whereas

$git diff --minimal 14415745b2..1fa611065

is exactly what we want.

Unfortunately there seems to be no way to teach similar smarts to the
merge diff and conflict generation code, because with the minimal diff
there really shouldn't be any conflicts. For added hilarity, every
time something in that area changes the + and - lines in the diff move
around like crazy, again resulting in new conflicts. So I fear this
mess will stay with us for a little longer (and might result in
another backmerge down the road).

Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

show more ...

Merge tag 'v3.4-rc5' into next

Linux 3.4-rc5

Merge to pull in prerequisite change for Smack:
86812bb0de1a3758dc6c7aa01a763158a7c0638a

Requested by Casey.

Merge 3.4-rc5 into driver-core-next

This was done to resolve a merge issue with the init/main.c file.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@

Merge 3.4-rc5 into driver-core-next

This was done to resolve a merge issue with the init/main.c file.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge tag 'v3.4-rc5' into for-3.5/core

The core branch is behind driver commits that we want to build
on for 3.5, hence I'm pulling in a later -rc.

Linux 3.4-rc5

Conflicts:
Documentation/feature-

Merge tag 'v3.4-rc5' into for-3.5/core

The core branch is behind driver commits that we want to build
on for 3.5, hence I'm pulling in a later -rc.

Linux 3.4-rc5

Conflicts:
Documentation/feature-removal-schedule.txt

Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux

Conflicts:
arch/sparc/kernel/leon_smp.c

Merge mainline to get the nobootmem.c bug fix, for the sake
of the sparc64 NO_BOOTMEM con

Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux

Conflicts:
arch/sparc/kernel/leon_smp.c

Merge mainline to get the nobootmem.c bug fix, for the sake
of the sparc64 NO_BOOTMEM conversion.

Resolve a small include line conflict in leon_smp.c

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma

Pull [GIT PULL] slave-dmaengine fixes from Vinod Koul.

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine/

Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma

Pull [GIT PULL] slave-dmaengine fixes from Vinod Koul.

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine/amba-pl08x : reset phychan_hold on terminate all
dma: pl330: fix a couple of compilation warnings
dma/ste_dma40: fix erroneous comparison
dma/ste_dma40: explicitly include regulator consumer header
dma40: Improve the logic of stopping logical chan
dmaengine: at_hdmac: remove clear-on-read in atc_dostart()
dma: mxs-dma: enable channel in device_issue_pending call
dmaengine: imx-dma: dont complete descriptor for cyclic dma

show more ...

dma40: Improve the logic of stopping logical chan

can be directly stopped by issuing a SUSPEND_REQ on the EE
bits. There is no need to suspend the physical channel and
restart it.

Also, the support

dma40: Improve the logic of stopping logical chan

can be directly stopped by issuing a SUSPEND_REQ on the EE
bits. There is no need to suspend the physical channel and
restart it.

Also, the support for pre-V2 hw is discontinued.

EE bits for writing:

00: disable only if AS=11 or AS=00
01: enable
10: suspend_req only if AS=01 & EE=01 or EE=11
11: round / no change for writing

Signed-off-by: Narayanan G <narayanan.gopalakrishnan@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>

show more ...