Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
"We have some late breaking reports that a patch series to rework clk
rate

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
"We have some late breaking reports that a patch series to rework clk
rate range support broke boot on some devices, so I've left that
branch out of this. Hopefully we can get to that next week, or punt on
it and let it bake another cycle. That means we don't really have any
changes to the core framework this time around besides a few typo
fixes. Instead this is all clk driver updates and fixes.

The usual suspects are here (again), with Qualcomm dominating the
diffstat. We look to have gained support for quite a few new Qualcomm
SoCs and Dmitry worked on updating many of the existing Qualcomm
drivers to use clk_parent_data. After that we have MediaTek drivers
getting some much needed updates, in particular to support GPU DVFS.
There are also quite a few Samsung clk driver patches, but that's
mostly because there was a maintainer change and so last release we
missed some of those patches.

Overall things look normal, but I'm slowly reviewing core framework
code nowadays and that shows given the rate range patches had to be
yanked last minute. Let's hope this situation changes soon.

New Drivers:
- Support for Renesas VersaClock7 clock generator family
- Add Spreadtrum UMS512 SoC clk support
- New clock drivers for MediaTek Helio X10 MT6795
- Display clks for Qualcomm SM6115, SM8450
- GPU clks for Qualcomm SC8280XP
- Qualcomm MSM8909 and SM6375 global and SMD RPM clk drivers

Deleted Drivers:
- Remove DaVinci DM644x and DM646x clk driver support

Updates:
- Convert Baikal-T1 CCU driver to platform driver
- Split reset support out of primary Baikal-T1 CCU driver
- Add some missing clks required for RPiVid Video Decoder on
RaspberryPi
- Mark PLLC critical on bcm2835
- More devm helpers for fixed rate registration
- Various PXA168 clk driver fixes
- Add resets for MediaTek MT8195 PCIe and USB
- Miscellaneous of_node_put() fixes
- Nuke dt-bindings/clk path (again) by moving headers to
dt-bindings/clock
- Convert gpio-clk-gate binding to YAML
- Various fixes to AMD/Xilinx Zynqmp clk driver
- Graduate AMD/Xilinx "clocking wizard" driver from staging
- Add missing DPI1_HDMI clock in MT8195 VDOSYS1
- Clock driver changes to support GPU DVFS on MT8183, MT8192, MT8195
- Fix GPU clock topology on MT8195
- Propogate rate changes from GPU clock gate up the tree
- Clock mux notifiers for GPU-related PLLs
- Conversion of more "simple" drivers to mtk_clk_simple_probe()
- Hook up mtk_clk_simple_remove() for "simple" MT8192 clock drivers
- Fixes to previous |struct clk| to |struct clk_hw| conversion on
MediaTek
- Shrink MT8192 clock driver by deduplicating clock parent lists
- Change order between 'sim_enet_root_clk' and 'enet_qos_root_clk'
clocks for i.MX8MP
- Drop unnecessary newline in i.MX8MM dt-bindings
- Add more MU1 and SAI clocks dt-bindings Ids
- Introduce slice busy bit check for i.MX93 composite clock
- Introduce white list bit check for i.MX93 composite clock
- Add new i.MX93 clock gate
- Add MU1 and MU2 clocks to i.MX93 clock provider
- Add SAI IPG clocks to i.MX93 clock provider
- add generic clocks for U(S)ART available on SAMA5D2 SoCs
- reset controller support for Polarfire clocks
- .round_rate and .set rate support for clk-mpfs
- code cleanup for clk-mpfs
- PLL support for PolarFire SoC's Clock Conditioning Circuitry
- Add watchdog, I2C, pin control/GPIO, and Ethernet clocks on R-Car
V4H
- Add SDHI, Timer (CMT/TMU), and SPI (MSIOF) clocks on R-Car S4-8
- Add I2C clocks and resets on RZ/V2M
- Document clock support for the RZ/Five SoC
- mux-variant clock using the table variant to select parents
- clock controller for the rv1126 soc
- conversion of rk3128 to yaml and relicensing of the yaml bindings
to gpl2+MIT (following dt-binding guildelines)
- Exynos7885: add FSYS, TREX and MFC clock controllers
- Exynos850: add IS and AUD (audio) clock controllers with bindings
- ExynosAutov9: add FSYS clock controllers with bindings
- ExynosAutov9: correct clock IDs in bindings of Peric 0 and 1 clock
controllers, due to duplicated entries. This is an acceptable ABI
break: recently developed/added platform so without legacies, acked
by known users/developers
- ExynosAutov9: add few missing Peric 0/1 gates
- ExynosAutov9: correct register offsets of few Peric 0/1 clocks
- Minor code improvements (use of_device_get_match_data() helper,
code style)
- Add Krzysztof Kozlowski as co-maintainer of Samsung SoC clocks, as
he already maintainers that architecture/platform
- Keep Qualcomm GDSCs enabled when PWRSTS_RET flag is there, solving
retention issues during suspend of USB on Qualcomm sc7180/sc7280
and SC8280XP
- Qualcomm SM6115 and QCM2260 are moved to reuse PLL configuration
- Qualcomm SDM660 SDCC1 moved to floor clk ops
- Support for the APCS PLLs for Qualcomm IPQ8064, IPQ8074 and IPQ6018
was added/fixed
- The Qualcomm MSM8996 CPU clocks are updated with support for ACD
- Support for Qualcomm SDM670 GCC and RPMh clks was added
- Transition to parent_data, parent_hws and use of ARRAY_SIZE() for
num_parents was done for many Qualcomm SoCs
- Support for per-reset defined delay on Qualcomm was introduced"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (283 commits)
clk: qcom: gcc-sm6375: Ensure unsigned long type
clk: qcom: gcc-sm6375: Remove unused variables
clk: qcom: kpss-xcc: convert to parent data API
clk: introduce (devm_)hw_register_mux_parent_data_table API
clk: allow building lan966x as a module
clk: clk-xgene: simplify if-if to if-else
clk: ast2600: BCLK comes from EPLL
clk: clocking-wizard: Depend on HAS_IOMEM
clk: clocking-wizard: Use dev_err_probe() helper
clk: nxp: fix typo in comment
clk: pxa: add a check for the return value of kzalloc()
clk: vc5: Add support for IDT/Renesas VersaClock 5P49V6975
dt-bindings: clock: vc5: Add 5P49V6975
clk: mvebu: armada-37xx-tbg: Remove the unneeded result variable
clk: ti: dra7-atl: Fix reference leak in of_dra7_atl_clk_probe
clk: Renesas versaclock7 ccf device driver
dt-bindings: Renesas versaclock7 device tree bindings
clk: ti: Balance of_node_get() calls for of_find_node_by_name()
clk: imx: scu: fix memleak on platform_device_add() fails
clk: vc5: Use regmap_{set,clear}_bits() where appropriate
...

show more ...

Merge branches 'clk-fixed-rate', 'clk-spreadtrum', 'clk-pxa' and 'clk-ti' into clk-next

- More devm helpers for fixed rate registration
- Add Spreadtrum UMS512 SoC clk support
- Various PXA168 cl

Merge branches 'clk-fixed-rate', 'clk-spreadtrum', 'clk-pxa' and 'clk-ti' into clk-next

- More devm helpers for fixed rate registration
- Add Spreadtrum UMS512 SoC clk support
- Various PXA168 clk driver fixes

* clk-fixed-rate:
clk: fixed-rate: add devm_clk_hw_register_fixed_rate
clk: asm9260: use parent index to link the reference clock

* clk-spreadtrum:
clk: sprd: Add clocks support for UMS512

* clk-pxa:
clk: pxa: add a check for the return value of kzalloc()
clk: mmp: pxa168: control shared SDH bits with separate clock
dt-bindings: marvell,pxa168: add clock ids for SDH AXI clocks
clk: mmp: pxa168: add clocks for SDH2 and SDH3
dt-bindings: marvell,pxa168: add clock id for SDH3
clk: mmp: pxa168: fix GPIO clock enable bits
clk: mmp: pxa168: add muxes for more peripherals
clk: mmp: pxa168: fix incorrect parent clocks
clk: mmp: pxa168: fix const-correctness
clk: mmp: pxa168: add new clocks for peripherals
dt-bindings: marvell,pxa168: add clock ids for additional dividers
clk: mmp: pxa168: fix incorrect dividers
clk: mmp: pxa168: add additional register defines

* clk-ti:
clk: davinci: cfgchip: Use dev_err_probe() helper
clk: davinci: pll: fix spelling typo in comment
MAINTAINERS: add header file to TI DAVINCI SERIES CLOCK DRIVER

show more ...

Merge drm/drm-next into drm-intel-gt-next

Daniele needs 84d4333c1e28 ("misc/mei: Add NULL check to component match
callback functions") in order to merge the DG2 HuC patches.

Signed-off-by: Tvrtko

Merge drm/drm-next into drm-intel-gt-next

Daniele needs 84d4333c1e28 ("misc/mei: Add NULL check to component match
callback functions") in order to merge the DG2 HuC patches.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

clk: fixed-rate: add devm_clk_hw_register_fixed_rate

Add devm_clk_hw_register_fixed_rate(), devres-managed helper to register
fixed-rate clock.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@lin

clk: fixed-rate: add devm_clk_hw_register_fixed_rate

Add devm_clk_hw_register_fixed_rate(), devres-managed helper to register
fixed-rate clock.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220916061740.87167-3-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

Merge part of branch 'for-next.instantiate' into for-next

Merge drm/drm-next into drm-intel-next

Sync up. In special to get the drm-intel-gt-next stuff.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge branch 'next' into for-linus

Prepare input updates for 5.20 (or 6.0) merge window.

Merge drm/drm-next into drm-misc-next-fixes

Backmerging from drm/drm-next for the final fixes that will go
into v5.20.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v5.19-rc5' into next

Merge with mainline to bring up the latest definition from MFD subsystem
needed for Mediatek keypad driver.

Merge tag 'asoc-fix-v5.19-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.19

A collection of fixes for v5.19, quite large but nothing major -

Merge tag 'asoc-fix-v5.19-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.19

A collection of fixes for v5.19, quite large but nothing major - a good
chunk of it is more stuff that was identified by mixer-test regarding
event generation.

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get new regmap APIs of v5.19-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'topic/ctl-enhancements' into for-next

Pull ALSA control enhancement patches.
One is the faster lookup of control elements, and another is to
introduce the input data validation.

Signe

Merge branch 'topic/ctl-enhancements' into for-next

Pull ALSA control enhancement patches.
One is the faster lookup of control elements, and another is to
introduce the input data validation.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

Merge tag 'kvm-riscv-fixes-5.19-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv fixes for 5.19, take #1

- Typo fix in arch/riscv/kvm/vmid.c

- Remove broken reference pattern from MAIN

Merge tag 'kvm-riscv-fixes-5.19-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv fixes for 5.19, take #1

- Typo fix in arch/riscv/kvm/vmid.c

- Remove broken reference pattern from MAINTAINERS entry

show more ...

Merge v5.19-rc1 into drm-misc-fixes

Let's kick-off the start of the 5.19 fix cycle

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'v5.19-rc1' into asoc-5.19

Linux 5.19-rc1

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
"Mainly driver updates this time around.

There's a single patch to the co

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
"Mainly driver updates this time around.

There's a single patch to the core clk framework that simplifies a
runtime PM call. Otherwise the majority of the diff falls to a few SoC
drivers: Qualcomm, STM32 and MediaTek. Those SoCs gain some new
hardware support and what comes along with that is quite a few lines
of data and some clk_ops code.

Beyond the new hardware support we have the usual pile of driver
updates that add missing clks on already supported SoCs or fix up
problems like bad clk tree descriptions. It's nice to see that more
drivers are moving to clk_hw based APIs too.

New Drivers:
- Add STM32MP13 RCC driver (Reset Clock Controller)
- MediaTek MT8186 SoC clk support
- Airoha EN7523 SoC system clocks
- Clock driver for exynosautov9 SoC
- Renesas R-Car V4H and RZ/V2M SoCs
- Renesas RZ/G2UL SoC
- LPASS clk driver for Qualcomm sc7280 SoC
- GCC clk driver for Qualcomm SC8280XP SoC

Updates:
- SDCC uses floor clk ops on Qualcomm MSM8976
- Add modem reset and fix RPM clks on Qualcomm MSM8976
- Add the two missing CLKOUT clocks for U8500/DB8500 SoC
- Mark some clks critical on Ingenic X1000
- Convert ux500 to clk_hw
- Move MediaTek driver to clk_hw provider APIs
- Use i2c driver probe_new to avoid id scans
- Convert a number of Rockchip dt bindings to YAML
- Mark hclk_vo critical on Rockchip rk3568
- Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage
- Various cleanups like memory allocation error checks and plugged
leaks
- Allwinner H6 RTC clock support
- Allwinner H616 32 kHz clock support
- Add the Universal Flash Storage clock on Renesas R-Car S4-8
- Add I2C, SSIF-2 (sound), USB, CANFD, OSTM (timer), WDT, SPI Multi
I/O Bus, RSPI, TSU (thermal), and ADC clocks and resets on Renesas
RZ/G2UL
- Add display clock support on Renesas RZ/G2L
- Add RPC (QSPI/HyperFlash) clocks on Renesas R-Car E3 and D3
- Add 27 MHz phy PLL ref clock on i.MX
- Add mcore_booted module parameter to tell kernel M core has already
booted for i.MX
- Remove snvs clock on i.MX because it was for secure world only
- Add dt bindings for i.MX8MN GPT
- Add DISP2 pixel clock for i.MX8MP
- Add clkout1/2 for i.MX8MP
- Fix parent clock of ubs_root_clk for i.MX8MP
- Implement better RCG parking on Qualcomm SoCs using the shared RCG
clk ops
- Kerneldoc fixes
- Switch Tegra BPMP to determine_rate clk op
- Add a pointer to dt schema for generic clock bindings"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (168 commits)
Revert "clk: qcom: regmap-mux: add pipe clk implementation"
Revert "clk: qcom: gcc-sc7280: use new clk_regmap_mux_safe_ops for PCIe pipe clocks"
Revert "clk: qcom: gcc-sm8450: use new clk_regmap_mux_safe_ops for PCIe pipe clocks"
clk: bcm: rpi: Use correct order for the parameters of devm_kcalloc()
clk: stm32mp13: add safe mux management
clk: stm32mp13: add multi mux function
clk: stm32mp13: add all STM32MP13 kernel clocks
clk: stm32mp13: add all STM32MP13 peripheral clocks
clk: stm32mp13: manage secured clocks
clk: stm32mp13: add composite clock
clk: stm32mp13: add stm32 divider clock
clk: stm32mp13: add stm32_gate management
clk: stm32mp13: add stm32_mux clock management
clk: stm32: Introduce STM32MP13 RCC drivers (Reset Clock Controller)
dt-bindings: rcc: stm32: add new compatible for STM32MP13 SoC
clk: ti: clkctrl: replace usage of found with dedicated list iterator variable
clk: ti: composite: Prefer kcalloc over open coded arithmetic
dt-bindings: clock: exynosautov9: correct count of NR_CLK
clk: mediatek: mt8173: Switch to clk_hw provider APIs
clk: mediatek: Switch to clk_hw provider APIs
...

show more ...

Merge branches 'clk-ti', 'clk-cleanup', 'clk-airoha', 'clk-i2c-simple' and 'clk-renesas' into clk-next

- Airoha EN7523 SoC system clocks
- Use i2c driver probe_new to avoid id scans

* clk-ti:
c

Merge branches 'clk-ti', 'clk-cleanup', 'clk-airoha', 'clk-i2c-simple' and 'clk-renesas' into clk-next

- Airoha EN7523 SoC system clocks
- Use i2c driver probe_new to avoid id scans

* clk-ti:
clk: ti: clkctrl: replace usage of found with dedicated list iterator variable
clk: ti: composite: Prefer kcalloc over open coded arithmetic
clk: keystone: syscon-clk: Add support for AM62 epwm-tbclk
dt-bindings: clock: ehrpwm: Add AM62 specific compatible

* clk-cleanup:
clk: bcm: rpi: Use correct order for the parameters of devm_kcalloc()
clk: fixed-rate: Remove redundant if statement
clk: mux: remove redundant initialization of variable width
clk: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
clk: actions: remove redundant assignment after a mask operation

* clk-airoha:
clk: en7523: fix wrong pointer check in en7523_clk_probe()
clk: en7523: Add clock driver for Airoha EN7523 SoC
dt-bindings: Add en7523-scu device tree binding documentation

* clk-i2c-simple:
clk: renesas-pcie: use simple i2c probe function
clk: si570: use i2c_match_id and simple i2c probe
clk: si544: use i2c_match_id and simple i2c probe
clk: si5351: use i2c_match_id and simple i2c probe
clk: si5341: use simple i2c probe function
clk: si514: use simple i2c probe function
clk: max9485: use simple i2c probe function
clk: cs2000-cp: use simple i2c probe function
clk: cdce925: use i2c_match_id and simple i2c probe
clk: cdce706: use simple i2c probe function

* clk-renesas: (48 commits)
clk: renesas: r9a09g011: Add eth clock and reset entries
clk: renesas: Add RZ/V2M support using the rzg2l driver
clk: renesas: rzg2l: Add support for RZ/V2M reset monitor reg
clk: renesas: rzg2l: Make use of CLK_MON registers optional
clk: renesas: rzg2l: Set HIWORD mask for all mux and dividers
clk: renesas: rzg2l: Add read only versions of the clk macros
clk: renesas: rzg2l: Move the DEF_MUX array size calc into the macro
dt-bindings: clock: renesas,rzg2l: Document RZ/V2M SoC
clk: renesas: r9a07g044: Fix OSTM1 module clock name
clk: renesas: r9a07g043: Add clock and reset entries for ADC
clk: renesas: r9a07g043: Add TSU clock and reset entry
clk: renesas: r9a07g043: Add RSPI clock and reset entries
clk: renesas: r9a07g043: Add clock and reset entries for SPI Multi I/O Bus Controller
clk: renesas: r9a07g044: Add DSI clock and reset entries
clk: renesas: r9a07g044: Add LCDC clock and reset entries
clk: renesas: r9a07g044: Add M4 Clock support
clk: renesas: r9a07g044: Add M3 Clock support
clk: renesas: r9a07g044: Add {M2, M2_DIV2} Clocks support
clk: renesas: r9a07g044: Add M1 clock support
clk: renesas: rzg2l: Add DSI divider clk support
...

show more ...

clk: fixed-rate: Remove redundant if statement

(np) is always true when (dev || !np) is false, so just remove
the check.

Signed-off-by: Li Zhengyu <lizhengyu3@huawei.com>
Link: https://lore.kernel.

clk: fixed-rate: Remove redundant if statement

(np) is always true when (dev || !np) is false, so just remove
the check.

Signed-off-by: Li Zhengyu <lizhengyu3@huawei.com>
Link: https://lore.kernel.org/r/20220509092102.140520-1-lizhengyu3@huawei.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.12 merge window.

Merge tag 'v5.11' into next

Merge with mainline to get latest APIs and device tree bindings.

Merge branch 'for-5.11/elecom' into for-linus

- support for EX-G M-XGL20DLBK device, from YOSHIOKA Takuma

Merge remote-tracking branch 'spi/for-5.10' into spi-linus

Merge remote-tracking branch 'asoc/for-5.10' into asoc-linus

Merge branches 'for-next/kvm-build-fix', 'for-next/va-refactor', 'for-next/lto', 'for-next/mem-hotplug', 'for-next/cppc-ffh', 'for-next/pad-image-header', 'for-next/zone-dma-default-32-bit', 'for-nex

Merge branches 'for-next/kvm-build-fix', 'for-next/va-refactor', 'for-next/lto', 'for-next/mem-hotplug', 'for-next/cppc-ffh', 'for-next/pad-image-header', 'for-next/zone-dma-default-32-bit', 'for-next/signal-tag-bits' and 'for-next/cmdline-extended' into for-next/core

* for-next/kvm-build-fix:
: Fix KVM build issues with 64K pages
KVM: arm64: Fix build error in user_mem_abort()

* for-next/va-refactor:
: VA layout changes
arm64: mm: don't assume struct page is always 64 bytes
Documentation/arm64: fix RST layout of memory.rst
arm64: mm: tidy up top of kernel VA space
arm64: mm: make vmemmap region a projection of the linear region
arm64: mm: extend linear region for 52-bit VA configurations

* for-next/lto:
: Upgrade READ_ONCE() to RCpc acquire on arm64 with LTO
arm64: lto: Strengthen READ_ONCE() to acquire when CONFIG_LTO=y
arm64: alternatives: Remove READ_ONCE() usage during patch operation
arm64: cpufeatures: Add capability for LDAPR instruction
arm64: alternatives: Split up alternative.h
arm64: uaccess: move uao_* alternatives to asm-uaccess.h

* for-next/mem-hotplug:
: Memory hotplug improvements
arm64/mm/hotplug: Ensure early memory sections are all online
arm64/mm/hotplug: Enable MEM_OFFLINE event handling
arm64/mm/hotplug: Register boot memory hot remove notifier earlier
arm64: mm: account for hotplug memory when randomizing the linear region

* for-next/cppc-ffh:
: Add CPPC FFH support using arm64 AMU counters
arm64: abort counter_read_on_cpu() when irqs_disabled()
arm64: implement CPPC FFH support using AMUs
arm64: split counter validation function
arm64: wrap and generalise counter read functions

* for-next/pad-image-header:
: Pad Image header to 64KB and unmap it
arm64: head: tidy up the Image header definition
arm64/head: avoid symbol names pointing into first 64 KB of kernel image
arm64: omit [_text, _stext) from permanent kernel mapping

* for-next/zone-dma-default-32-bit:
: Default to 32-bit wide ZONE_DMA (previously reduced to 1GB for RPi4)
of: unittest: Fix build on architectures without CONFIG_OF_ADDRESS
mm: Remove examples from enum zone_type comment
arm64: mm: Set ZONE_DMA size based on early IORT scan
arm64: mm: Set ZONE_DMA size based on devicetree's dma-ranges
of: unittest: Add test for of_dma_get_max_cpu_address()
of/address: Introduce of_dma_get_max_cpu_address()
arm64: mm: Move zone_dma_bits initialization into zone_sizes_init()
arm64: mm: Move reserve_crashkernel() into mem_init()
arm64: Force NO_BLOCK_MAPPINGS if crashkernel reservation is required
arm64: Ignore any DMA offsets in the max_zone_phys() calculation

* for-next/signal-tag-bits:
: Expose the FAR_EL1 tag bits in siginfo
arm64: expose FAR_EL1 tag bits in siginfo
signal: define the SA_EXPOSE_TAGBITS bit in sa_flags
signal: define the SA_UNSUPPORTED bit in sa_flags
arch: provide better documentation for the arch-specific SA_* flags
signal: clear non-uapi flag bits when passing/returning sa_flags
arch: move SA_* definitions to generic headers
parisc: start using signal-defs.h
parisc: Drop parisc special case for __sighandler_t

* for-next/cmdline-extended:
: Add support for CONFIG_CMDLINE_EXTENDED
arm64: Extend the kernel command line from the bootloader
arm64: kaslr: Refactor early init command line parsing

show more ...

Merge remote-tracking branch 'origin/master' into perf/core

Further perf/core patches will depend on:

d3f7b1bb2040 ("mm/gup: fix gup_fast with dynamic page table folding")

which is already in Li

Merge remote-tracking branch 'origin/master' into perf/core

Further perf/core patches will depend on:

d3f7b1bb2040 ("mm/gup: fix gup_fast with dynamic page table folding")

which is already in Linus' tree.

show more ...