Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM fixes from Paolo Bonzini:

- syzkaller NULL pointer dereference

- TDP MMU performance issue with disabling dirty loggin

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM fixes from Paolo Bonzini:

- syzkaller NULL pointer dereference

- TDP MMU performance issue with disabling dirty logging

- 5.14 regression with SVM TSC scaling

- indefinite stall on applying live patches

- unstable selftest

- memory leak from wrong copy-and-paste

- missed PV TLB flush when racing with emulation

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: do not report a vCPU as preempted outside instruction boundaries
KVM: x86: do not set st->preempted when going back to user space
KVM: SVM: fix tsc scaling cache logic
KVM: selftests: Make hyperv_clock selftest more stable
KVM: x86/MMU: Zap non-leaf SPTEs when disabling dirty logging
x86: drop bogus "cc" clobber from __try_cmpxchg_user_asm()
KVM: x86/mmu: Check every prev_roots in __kvm_mmu_free_obsolete_roots()
entry/kvm: Exit to user mode when TIF_NOTIFY_SIGNAL is set
KVM: Don't null dereference ops->destroy

show more ...

KVM: x86: do not set st->preempted when going back to user space

Similar to the Xen path, only change the vCPU's reported state if the vCPU
was actually preempted. The reason for KVM's behavior is

KVM: x86: do not set st->preempted when going back to user space

Similar to the Xen path, only change the vCPU's reported state if the vCPU
was actually preempted. The reason for KVM's behavior is that for example
optimistic spinning might not be a good idea if the guest is doing repeated
exits to userspace; however, it is confusing and unlikely to make a difference,
because well-tuned guests will hardly ever exit KVM_RUN in the first place.

Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

Merge tag 'v5.19-rc1' into asoc-5.19

Linux 5.19-rc1

Merge tag 'v5.18'

Linux 5.18

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
"S390:

- ultravisor communication device driver

- fix TEID on terminating storage key

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
"S390:

- ultravisor communication device driver

- fix TEID on terminating storage key ops

RISC-V:

- Added Sv57x4 support for G-stage page table

- Added range based local HFENCE functions

- Added remote HFENCE functions based on VCPU requests

- Added ISA extension registers in ONE_REG interface

- Updated KVM RISC-V maintainers entry to cover selftests support

ARM:

- Add support for the ARMv8.6 WFxT extension

- Guard pages for the EL2 stacks

- Trap and emulate AArch32 ID registers to hide unsupported features

- Ability to select and save/restore the set of hypercalls exposed to
the guest

- Support for PSCI-initiated suspend in collaboration with userspace

- GICv3 register-based LPI invalidation support

- Move host PMU event merging into the vcpu data structure

- GICv3 ITS save/restore fixes

- The usual set of small-scale cleanups and fixes

x86:

- New ioctls to get/set TSC frequency for a whole VM

- Allow userspace to opt out of hypercall patching

- Only do MSR filtering for MSRs accessed by rdmsr/wrmsr

AMD SEV improvements:

- Add KVM_EXIT_SHUTDOWN metadata for SEV-ES

- V_TSC_AUX support

Nested virtualization improvements for AMD:

- Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)

- Allow AVIC to co-exist with a nested guest running

- Fixes for LBR virtualizations when a nested guest is running, and
nested LBR virtualization support

- PAUSE filtering for nested hypervisors

Guest support:

- Decoupling of vcpu_is_preempted from PV spinlocks"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (199 commits)
KVM: x86: Fix the intel_pt PMI handling wrongly considered from guest
KVM: selftests: x86: Sync the new name of the test case to .gitignore
Documentation: kvm: reorder ARM-specific section about KVM_SYSTEM_EVENT_SUSPEND
x86, kvm: use correct GFP flags for preemption disabled
KVM: LAPIC: Drop pending LAPIC timer injection when canceling the timer
x86/kvm: Alloc dummy async #PF token outside of raw spinlock
KVM: x86: avoid calling x86 emulator without a decoded instruction
KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak
x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave)
s390/uv_uapi: depend on CONFIG_S390
KVM: selftests: x86: Fix test failure on arch lbr capable platforms
KVM: LAPIC: Trace LAPIC timer expiration on every vmentry
KVM: s390: selftest: Test suppression indication on key prot exception
KVM: s390: Don't indicate suppression on dirtying, failing memop
selftests: drivers/s390x: Add uvdevice tests
drivers/s390/char: Add Ultravisor io device
MAINTAINERS: Update KVM RISC-V entry to cover selftests support
RISC-V: KVM: Introduce ISA extension register
RISC-V: KVM: Cleanup stale TLB entries when host CPU changes
RISC-V: KVM: Add remote HFENCE functions based on VCPU requests
...

show more ...

Merge branch 'kvm-older-features' into HEAD

Merge branch for features that did not make it into 5.18:

* New ioctls to get/set TSC frequency for a whole VM

* Allow userspace to opt out of hypercall

Merge branch 'kvm-older-features' into HEAD

Merge branch for features that did not make it into 5.18:

* New ioctls to get/set TSC frequency for a whole VM

* Allow userspace to opt out of hypercall patching

Nested virtualization improvements for AMD:

* Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)

* Allow AVIC to co-exist with a nested guest running

* Fixes for LBR virtualizations when a nested guest is running,
and nested LBR virtualization support

* PAUSE filtering for nested hypervisors

Guest support:

* Decoupling of vcpu_is_preempted from PV spinlocks

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

KVM: x86/xen: handle PV timers oneshot mode

If the guest has offloaded the timer virq, handle the following
hypercalls for programming the timer:

VCPUOP_set_singleshot_timer
VCPUOP_stop_sin

KVM: x86/xen: handle PV timers oneshot mode

If the guest has offloaded the timer virq, handle the following
hypercalls for programming the timer:

VCPUOP_set_singleshot_timer
VCPUOP_stop_singleshot_timer
set_timer_op(timestamp_ns)

The event channel corresponding to the timer virq is then used to inject
events once timer deadlines are met. For now we back the PV timer with
hrtimer.

[ dwmw2: Add save/restore, 32-bit compat mode, immediate delivery,
don't check timer in kvm_vcpu_has_event() ]

Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220303154127.202856-13-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

KVM: x86/xen: Add KVM_XEN_VCPU_ATTR_TYPE_VCPU_ID

In order to intercept hypercalls such as VCPUOP_set_singleshot_timer, we
need to be aware of the Xen CPU numbering.

This looks a lot like the Hyper-

KVM: x86/xen: Add KVM_XEN_VCPU_ATTR_TYPE_VCPU_ID

In order to intercept hypercalls such as VCPUOP_set_singleshot_timer, we
need to be aware of the Xen CPU numbering.

This looks a lot like the Hyper-V handling of vpidx, for obvious reasons.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220303154127.202856-12-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

KVM: x86/xen: Support direct injection of event channel events

This adds a KVM_XEN_HVM_EVTCHN_SEND ioctl which allows direct injection
of events given an explicit { vcpu, port, priority } in precise

KVM: x86/xen: Support direct injection of event channel events

This adds a KVM_XEN_HVM_EVTCHN_SEND ioctl which allows direct injection
of events given an explicit { vcpu, port, priority } in precisely the
same form that those fields are given in the IRQ routing table.

Userspace is currently able to inject 2-level events purely by setting
the bits in the shared_info and vcpu_info, but FIFO event channels are
harder to deal with; we will need the kernel to take sole ownership of
delivery when we support those.

A patch advertising this feature with a new bit in the KVM_CAP_XEN_HVM
ioctl will be added in a subsequent patch.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220303154127.202856-9-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

KVM: x86/xen: Make kvm_xen_set_evtchn() reusable from other places

Clean it up to return -errno on error consistently, while still being
compatible with the return conventions for kvm_arch_set_irq_i

KVM: x86/xen: Make kvm_xen_set_evtchn() reusable from other places

Clean it up to return -errno on error consistently, while still being
compatible with the return conventions for kvm_arch_set_irq_inatomic()
and the kvm_set_irq() callback.

We use -ENOTCONN to indicate when the port is masked. No existing users
care, except that it's negative.

Also allow it to optimise the vCPU lookup. Unless we abuse the lapic
map, there is no quick lookup from APIC ID to a vCPU; the logic in
kvm_get_vcpu_by_id() will just iterate over all vCPUs till it finds
the one it wants. So do that just once and stash the result in the
struct kvm_xen_evtchn for next time.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220303154127.202856-8-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

KVM: x86/xen: Use gfn_to_pfn_cache for vcpu_info

Currently, the fast path of kvm_xen_set_evtchn_fast() doesn't set the
index bits in the target vCPU's evtchn_pending_sel, because it only has
a users

KVM: x86/xen: Use gfn_to_pfn_cache for vcpu_info

Currently, the fast path of kvm_xen_set_evtchn_fast() doesn't set the
index bits in the target vCPU's evtchn_pending_sel, because it only has
a userspace virtual address with which to do so. It just sets them in
the kernel, and kvm_xen_has_interrupt() then completes the delivery to
the actual vcpu_info structure when the vCPU runs.

Using a gfn_to_pfn_cache allows kvm_xen_set_evtchn_fast() to do the full
delivery in the common case.

Clean up the fallback case too, by moving the deferred delivery out into
a separate kvm_xen_inject_pending_events() function which isn't ever
called in atomic contexts as __kvm_xen_has_interrupt() is.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220303154127.202856-6-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

KVM: x86/xen: Use gfn_to_pfn_cache for runstate area

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220303154127.202856-4-dwmw2@

KVM: x86/xen: Use gfn_to_pfn_cache for runstate area

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220303154127.202856-4-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

Merge branches 'fixes' and 'misc' into for-linus

Merge branch 'for-5.18/amd-sfh' into for-linus

- dead code elimination (Christophe JAILLET)

Merge tag 'v5.17-rc4' into for-linus

Merge with mainline to get the Intel ASoC generic helpers header and
other changes.

Merge tag 'v5.17-rc4' into next

Sync up with mainline to get the latest changes in HID subsystem.

Merge remote-tracking branch 'drm/drm-next' into drm-misc-next

First backmerge into drm-misc-next. Required for more helpers backmerged,
and to pull in 5.17 (rc2).

Signed-off-by: Maarten Lankhorst

Merge remote-tracking branch 'drm/drm-next' into drm-misc-next

First backmerge into drm-misc-next. Required for more helpers backmerged,
and to pull in 5.17 (rc2).

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Backmerge to bring in 5.17-rc2 to introduce a common baseline
to merge i915_regs changes from drm-intel-next.

Signed-off-by: Joonas Lahtinen <joonas.lahtin

Merge drm/drm-next into drm-intel-gt-next

Backmerge to bring in 5.17-rc2 to introduce a common baseline
to merge i915_regs changes from drm-intel-next.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Catch-up with 5.17-rc2 and trying to align with drm-intel-gt-next
for a possible topic branch for merging the split of i915_regs...

Signed-off-by: Rodrigo Viv

Merge drm/drm-next into drm-intel-next

Catch-up with 5.17-rc2 and trying to align with drm-intel-gt-next
for a possible topic branch for merging the split of i915_regs...

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Backmerging drm/drm-fixes into drm-misc-fixes for v5.17-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
"RISCV:

- Use common KVM implementation of MMU memory caches

- SBI v0.2 support for G

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
"RISCV:

- Use common KVM implementation of MMU memory caches

- SBI v0.2 support for Guest

- Initial KVM selftests support

- Fix to avoid spurious virtual interrupts after clearing hideleg CSR

- Update email address for Anup and Atish

ARM:

- Simplification of the 'vcpu first run' by integrating it into KVM's
'pid change' flow

- Refactoring of the FP and SVE state tracking, also leading to a
simpler state and less shared data between EL1 and EL2 in the nVHE
case

- Tidy up the header file usage for the nvhe hyp object

- New HYP unsharing mechanism, finally allowing pages to be unmapped
from the Stage-1 EL2 page-tables

- Various pKVM cleanups around refcounting and sharing

- A couple of vgic fixes for bugs that would trigger once the vcpu
xarray rework is merged, but not sooner

- Add minimal support for ARMv8.7's PMU extension

- Rework kvm_pgtable initialisation ahead of the NV work

- New selftest for IRQ injection

- Teach selftests about the lack of default IPA space and page sizes

- Expand sysreg selftest to deal with Pointer Authentication

- The usual bunch of cleanups and doc update

s390:

- fix sigp sense/start/stop/inconsistency

- cleanups

x86:

- Clean up some function prototypes more

- improved gfn_to_pfn_cache with proper invalidation, used by Xen
emulation

- add KVM_IRQ_ROUTING_XEN_EVTCHN and event channel delivery

- completely remove potential TOC/TOU races in nested SVM consistency
checks

- update some PMCs on emulated instructions

- Intel AMX support (joint work between Thomas and Intel)

- large MMU cleanups

- module parameter to disable PMU virtualization

- cleanup register cache

- first part of halt handling cleanups

- Hyper-V enlightened MSR bitmap support for nested hypervisors

Generic:

- clean up Makefiles

- introduce CONFIG_HAVE_KVM_DIRTY_RING

- optimize memslot lookup using a tree

- optimize vCPU array usage by converting to xarray"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (268 commits)
x86/fpu: Fix inline prefix warnings
selftest: kvm: Add amx selftest
selftest: kvm: Move struct kvm_x86_state to header
selftest: kvm: Reorder vcpu_load_state steps for AMX
kvm: x86: Disable interception for IA32_XFD on demand
x86/fpu: Provide fpu_sync_guest_vmexit_xfd_state()
kvm: selftests: Add support for KVM_CAP_XSAVE2
kvm: x86: Add support for getting/setting expanded xstate buffer
x86/fpu: Add uabi_size to guest_fpu
kvm: x86: Add CPUID support for Intel AMX
kvm: x86: Add XCR0 support for Intel AMX
kvm: x86: Disable RDMSR interception of IA32_XFD_ERR
kvm: x86: Emulate IA32_XFD_ERR for guest
kvm: x86: Intercept #NM for saving IA32_XFD_ERR
x86/fpu: Prepare xfd_err in struct fpu_guest
kvm: x86: Add emulation for IA32_XFD
x86/fpu: Provide fpu_update_guest_xfd() for IA32_XFD emulation
kvm: x86: Enable dynamic xfeatures at KVM_SET_CPUID2
x86/fpu: Provide fpu_enable_guest_xfd_features() for KVM
x86/fpu: Add guest support to xfd_enable_feature()
...

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.17 merge window.

KVM: x86/xen: Add KVM_IRQ_ROUTING_XEN_EVTCHN and event channel delivery

This adds basic support for delivering 2 level event channels to a guest.

Initially, it only supports delivery via the IRQ ro

KVM: x86/xen: Add KVM_IRQ_ROUTING_XEN_EVTCHN and event channel delivery

This adds basic support for delivering 2 level event channels to a guest.

Initially, it only supports delivery via the IRQ routing table, triggered
by an eventfd. In order to do so, it has a kvm_xen_set_evtchn_fast()
function which will use the pre-mapped shared_info page if it already
exists and is still valid, while the slow path through the irqfd_inject
workqueue will remap the shared_info page if necessary.

It sets the bits in the shared_info page but not the vcpu_info; that is
deferred to __kvm_xen_has_interrupt() which raises the vector to the
appropriate vCPU.

Add a 'verbose' mode to xen_shinfo_test while adding test cases for this.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211210163625.2886-5-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

Merge branch 'reset/of-get-optional-exclusive' of git://git.pengutronix.de/pza/linux into timers/drivers/next

"Add optional variant of of_reset_control_get_exclusive(). If the
requested reset is not

Merge branch 'reset/of-get-optional-exclusive' of git://git.pengutronix.de/pza/linux into timers/drivers/next

"Add optional variant of of_reset_control_get_exclusive(). If the
requested reset is not specified in the device tree, this function
returns NULL instead of an error."

This dependency is needed for the Generic Timer Module (a.k.a OSTM)
support for RZ/G2L.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

show more ...

Merge tag 'v5.15' into next

Sync up with the mainline to get the latest APIs and DT bindings.