s390: kernel: Audit and remove any unnecessary uses of module.h

Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing
support

s390: kernel: Audit and remove any unnecessary uses of module.h

Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing
support to modules via EXPORT_SYMBOL and friends. That changed
when we forked out support for the latter into the export.h file.

This means we should be able to reduce the usage of module.h
in code that is obj-y Makefile or bool Kconfig. The advantage
in doing so is that module.h itself sources about 15 other headers;
adding significantly to what we feed cpp, and it can obscure what
headers we are effectively using.

Since module.h was the source for init.h (for __init) and for
export.h (for EXPORT_SYMBOL) we consider each change instance
for the presence of either and replace as needed. Build testing
revealed some implicit header usage that was fixed up accordingly.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 4.10 merge window.

Merge tag 'v4.9-rc3' into xtensa-for-next

Linux 4.9-rc3

Merge branch 'topic/error' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into regulator-fixed

Merge branch 'drm-tda998x-mali' into drm-tda998x-devel

Merge tag 'v4.8' into next

Sync up with mainline to bring in I2C host notify changes and other
updates.

Merge tag 'irqchip-4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core

Merge the first drop of irqchip updates for 4.9 from Marc Zyngier:

- ACPI IORT core code
-

Merge tag 'irqchip-4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core

Merge the first drop of irqchip updates for 4.9 from Marc Zyngier:

- ACPI IORT core code
- IORT support for the GICv3 ITS
- A few of GIC cleanups

show more ...

Merge branch 'x86/urgent' into x86/asm, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next-queued

Backmerge because too many conflicts, and also we need to get at the
latest struct fence patches from Gustavo. Requested by

Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next-queued

Backmerge because too many conflicts, and also we need to get at the
latest struct fence patches from Gustavo. Requested by Chris Wilson.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

show more ...

Merge branch 'linus' into timers/urgent, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'linus' into locking/urgent, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'for-hubcap-v4.9-readahead' of git://github.com/martinbrandenburg/linux

orangefs: integrate readahead cache changes from out-of-tree

The readahead cache has long been present as a compile

Merge tag 'for-hubcap-v4.9-readahead' of git://github.com/martinbrandenburg/linux

orangefs: integrate readahead cache changes from out-of-tree

The readahead cache has long been present as a compile time option to
OrangeFS. As it had not been tested in some time, it was disabled by
default. Recently, Walt Ligon started work reviving it, which eventually
culminated in the commit below to OrangeFS SVN.

r12519 | walt | 2016-07-13 14:32:42 -0400 (Wed, 13 Jul 2016) | 1 line
reintegrating readahead cache code

This cache is implemented almost entirely in userspace. There are a few
parameters exposed via sysfs, and the cache must be flushed after an
inode is released.

show more ...

Merge tag 'v4.8-rc1' into patchwork

Linux 4.8-rc1

* tag 'v4.8-rc1': (6093 commits)
Linux 4.8-rc1
block: rename bio bi_rw to bi_opf
target: iblock_execute_sync_cache() should use bio_set_op_at

Merge tag 'v4.8-rc1' into patchwork

Linux 4.8-rc1

* tag 'v4.8-rc1': (6093 commits)
Linux 4.8-rc1
block: rename bio bi_rw to bi_opf
target: iblock_execute_sync_cache() should use bio_set_op_attrs()
mm: make __swap_writepage() use bio_set_op_attrs()
block/mm: make bdev_ops->rw_page() take a bool for read/write
fs: return EPERM on immutable inode
ramoops: use persistent_ram_free() instead of kfree() for freeing prz
ramoops: use DT reserved-memory bindings
NTB: ntb_hw_intel: use local variable pdev
NTB: ntb_hw_intel: show BAR size in debugfs info
ntb_test: Add a selftest script for the NTB subsystem
ntb_perf: clear link_is_up flag when the link goes down.
ntb_pingpong: Add a debugfs file to get the ping count
ntb_tool: Add link status and files to debugfs
ntb_tool: Postpone memory window initialization for the user
ntb_perf: Wait for link before running test
ntb_perf: Return results by reading the run file
ntb_perf: Improve thread handling to increase robustness
ntb_perf: Schedule based on time not on performance
ntb_transport: Check the number of spads the hardware supports
...

show more ...

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:

- ARM: GICv3 ITS emulation and various fixes. Removal of the
old VGIC implementation.

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:

- ARM: GICv3 ITS emulation and various fixes. Removal of the
old VGIC implementation.

- s390: support for trapping software breakpoints, nested
virtualization (vSIE), the STHYI opcode, initial extensions
for CPU model support.

- MIPS: support for MIPS64 hosts (32-bit guests only) and lots
of cleanups, preliminary to this and the upcoming support for
hardware virtualization extensions.

- x86: support for execute-only mappings in nested EPT; reduced
vmexit latency for TSC deadline timer (by about 30%) on Intel
hosts; support for more than 255 vCPUs.

- PPC: bugfixes.

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (302 commits)
KVM: PPC: Introduce KVM_CAP_PPC_HTM
MIPS: Select HAVE_KVM for MIPS64_R{2,6}
MIPS: KVM: Reset CP0_PageMask during host TLB flush
MIPS: KVM: Fix ptr->int cast via KVM_GUEST_KSEGX()
MIPS: KVM: Sign extend MFC0/RDHWR results
MIPS: KVM: Fix 64-bit big endian dynamic translation
MIPS: KVM: Fail if ebase doesn't fit in CP0_EBase
MIPS: KVM: Use 64-bit CP0_EBase when appropriate
MIPS: KVM: Set CP0_Status.KX on MIPS64
MIPS: KVM: Make entry code MIPS64 friendly
MIPS: KVM: Use kmap instead of CKSEG0ADDR()
MIPS: KVM: Use virt_to_phys() to get commpage PFN
MIPS: Fix definition of KSEGX() for 64-bit
KVM: VMX: Add VMCS to CPU's loaded VMCSs before VMPTRLD
kvm: x86: nVMX: maintain internal copy of current VMCS
KVM: PPC: Book3S HV: Save/restore TM state in H_CEDE
KVM: PPC: Book3S HV: Pull out TM state save/restore into separate procedures
KVM: arm64: vgic-its: Simplify MAPI error handling
KVM: arm64: vgic-its: Make vgic_its_cmd_handle_mapi similar to other handlers
KVM: arm64: vgic-its: Turn device_id validation into generic ID validation
...

show more ...

Merge tag 'kvm-s390-next-4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

KVM: s390: Features and fixes for 4.8 part1

Four bigger things:
1. The implementation of the

Merge tag 'kvm-s390-next-4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

KVM: s390: Features and fixes for 4.8 part1

Four bigger things:
1. The implementation of the STHYI opcode in the kernel. This is used
in libraries like qclib [1] to provide enough information for a
capacity and usage based software licence pricing. The STHYI content
is defined by the related z/VM documentation [2]. Its data can be
composed by accessing several other interfaces provided by LPAR or
the machine. This information is partially sensitive or root-only
so the kernel does the necessary filtering.
2. Preparation for nested virtualization (VSIE). KVM should query the
proper sclp interfaces for the availability of some features before
using it. In the past we have been sloppy and simply assumed that
several features are available. With this we should be able to handle
most cases of a missing feature.
3. CPU model interfaces extended by some additional features that are
not covered by a facility bit in STFLE. For example all the crypto
instructions of the coprocessor provide a query function. As reality
tends to be more complex (e.g. export regulations might block some
algorithms) we have to provide additional interfaces to query or
set these non-stfle features.
4. Several fixes and changes detected and fixed when doing 1-3.

All features change base s390 code. All relevant patches have an ACK
from the s390 or component maintainers.

The next pull request for 4.8 (part2) will contain the implementation
of VSIE.

[1] http://www.ibm.com/developerworks/linux/linux390/qclib.html
[2] https://www.ibm.com/support/knowledgecenter/SSB27U_6.3.0/com.ibm.zvm.v630.hcpb4/hcpb4sth.htm

show more ...

s390: Make diag224 public

Diag204's cpu structures only contain the cpu type by means of an
index in the diag224 name table. Hence, to be able to use diag204 in
any meaningful way, we also need a us

s390: Make diag224 public

Diag204's cpu structures only contain the cpu type by means of an
index in the diag224 name table. Hence, to be able to use diag204 in
any meaningful way, we also need a usable diag224 interface.

Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

show more ...

s390: hypfs: Move diag implementation and data definitions

Diag 204 data and function definitions currently live in the hypfs
files. As KVM will be a consumer of this data, we need to make it
public

s390: hypfs: Move diag implementation and data definitions

Diag 204 data and function definitions currently live in the hypfs
files. As KVM will be a consumer of this data, we need to make it
publicly available and move it to the appropriate diag.{c,h} files.

__attribute__ ((packed)) occurences were replaced with __packed for
all moved structs.

Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

show more ...

Merge branch 'master' into for-next

Sync with Linus' tree so that patches against newer codebase can be applied.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Merge branch 'topic/update-bits' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap into asoc-rcar

Merge remote-tracking branch 'linusw-gpio/for-next' into devm_gpiochip

Base for demv_gpiochip_add_data() and devm_gpiochip_remove().

Merge tag 'v4.5-rc5' into asoc-mtk

Linux 4.5-rc5

Merge branch 'topic/acpi' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into spi-pxa2xx

Merge tag 'v4.4'

Linux 4.4

Orangefs: merge with V4.4

Merge tag 'v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into current

Linux 4.4

Orangefs: Merge tag 'v4.4-rc1' into for-next

Linux 4.4-rc1