Merge branch 'at91/dt' into next/drivers

Merging at91/dt as a prereq for the at91/drivers code.

* at91/dt: (43 commits)
ARM: at91/at91rm9200ek.dts: rearrange nodes in address ascending order
AR

Merge branch 'at91/dt' into next/drivers

Merging at91/dt as a prereq for the at91/drivers code.

* at91/dt: (43 commits)
ARM: at91/at91rm9200ek.dts: rearrange nodes in address ascending order
ARM: at91: dt: at91rm9200ek: add emac and nor flash support
ARM: at91: add uart aliases to sama5d3 dtsi
ARM: at91: add i2c2 pinctrl speficifation to sama5d3 DT
ARM: at91: Animeo IP: fix mtd partition table
ARM: at91: at91sam9g45: add i2c pinctrl
ARM: at91: at91sam9g45: set default mmc pinctrl-names
ARM: at91: sama5d3: enable qt1070 as a wakeup source
ARM: at91: add support for Cosino board series by HCE Engineering
ARM: at91/dt/sama5d3: add DMA information to SHA/AES/TDES nodes
ARM: at91/dt/trivial: before sama5d3, Atmel MPU were using at91 prefix
ARM: at91/dt/trivial: use macro for AES irq type
ARM: at91: sam9263ek: add dt lcd support
ARM: at91: at9sam9m10g45ek: add dt lcd support
ARM: at91: sam9263: add fb dt support
ARM: at91: sam9g45: add fb dt support
ARM: at91/dt: binding: add missing compatibility string in SDRAM/DDR documentation
ARM: at91/dt: binding: add precision to AIC documentation
ARM: at91/dt: add atmel,pullup-gpio to at91rm9200ek usb1 definition
ARM: at91/dt: add ethernet phy to at91rm9200ek board
...

show more ...

ARM: at91: don't use <mach/timex.h>

The platform specific <mach/timex.h> will be removed in a later patch.
So move its only still used symbol to a different header specific for
the only machine stil

ARM: at91: don't use <mach/timex.h>

The platform specific <mach/timex.h> will be removed in a later patch.
So move its only still used symbol to a different header specific for
the only machine still using it. Also add a few explicit includes of
<mach/hardware.h> that are implicitly available through <mach/timex.h>.

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

show more ...

Merge branch 'master' into for-next

Sync with Linus' tree to be able to apply fixes on top of newer things
in tree (efi-stub).

Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Merge remote-tracking branch 'wireless-next/master' into mac80211-next

Merge tag 'v3.13-rc4' into next

Synchronize with mainline to bring in the new keycode definitions and
new hwmon API.

Merge branch 'next/cleanup' into next/dt

Merge tag 'v3.13-rc3' into for-linus

Merging with the mainline to sync up on changes to serio core.

Merge tag 'v3.13-rc3' into drm-intel-next-queued

Linux 3.13-rc3

I need a backmerge for two reasons:
- For merging the ppgtt patches from Ben I need to pull in the bdw
support.
- We now have dupli

Merge tag 'v3.13-rc3' into drm-intel-next-queued

Linux 3.13-rc3

I need a backmerge for two reasons:
- For merging the ppgtt patches from Ben I need to pull in the bdw
support.
- We now have duplicated calls to intel_uncore_forcewake_reset in the
setup code to due 2 different patches merged into -next and 3.13.
The conflict is silen so I need the merge to be able to apply
Deepak's fixup patch.

Conflicts:
drivers/gpu/drm/i915/intel_display.c

Trivial conflict, it doesn't even show up in the merge diff.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

show more ...

Merge tag 'at91-cleanup' of git://github.com/at91linux/linux-at91 into next/cleanup

From Nicolas Ferre:
AT91: Move to Common Clock Framework and sama5d3 implementation
This is the first step to move

Merge tag 'at91-cleanup' of git://github.com/at91linux/linux-at91 into next/cleanup

From Nicolas Ferre:
AT91: Move to Common Clock Framework and sama5d3 implementation
This is the first step to move AT91 to the CCF.
- core CCF and drivers for most of the clocks
- use of CCF for sama5d3 (100% DT-based)

* tag 'at91-cleanup' of git://github.com/at91linux/linux-at91: (22 commits)
ARM: at91/dt: remove old clk material
ARM: at91: move sama5d3 SoC to common clk
ARM: at91/dt: define sama5d3xek's main clk frequency
ARM: at91/dt: define sama5d3 clocks
ARM: at91: prepare common clk transition for sama5d3 SoC
ARM: at91: prepare sama5 dt boards transition to common clk
ARM: at91: add new compatible strings for pmc driver
ARM: at91: move pit timer to common clk framework
dt: binding: add at91 clks dt bindings documentation
clk: at91: add PMC smd clock
clk: at91: add PMC usb clock
clk: at91: add PMC utmi clock
clk: at91: add PMC programmable clocks
clk: at91: add PMC peripheral clocks
clk: at91: add PMC system clocks
clk: at91: add PMC master clock
clk: at91: add PMC pll clocks
clk: at91: add PMC main clock
clk: at91: add PMC macro file for dt definitions
clk: at91: add PMC base support
...

Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

ARM: at91: move at91_pmc.h to include/linux/clk/at91_pmc.h

This patch moves at91_pmc.h header from machine specific directory
(arch/arm/mach-at91/include/mach/at91_pmc.h) to clk include directory
(i

ARM: at91: move at91_pmc.h to include/linux/clk/at91_pmc.h

This patch moves at91_pmc.h header from machine specific directory
(arch/arm/mach-at91/include/mach/at91_pmc.h) to clk include directory
(include/linux/clk/at91_pmc.h).
We need this to avoid reference to machine specific headers in clk
drivers.

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

show more ...

Merge branch 'omap-for-v3.13/fixes-take4' into omap-for-v3.14/board-removal

Merge branch 'dt-regressions' into omap-for-v3.13/fixes-take4

Merge tag 'v3.13-rc1' into patchwork

Linux 3.13-rc1

* tag 'v3.13-rc1': (11465 commits)
Linux 3.13-rc1
ALSA: hda - Set current_headset_type to ALC_HEADSET_TYPE_ENUM (janitorial)
ALSA: hda - Pr

Merge tag 'v3.13-rc1' into patchwork

Linux 3.13-rc1

* tag 'v3.13-rc1': (11465 commits)
Linux 3.13-rc1
ALSA: hda - Set current_headset_type to ALC_HEADSET_TYPE_ENUM (janitorial)
ALSA: hda - Provide missing pin configs for VAIO with ALC260
mm: place page->pmd_huge_pte to right union
MAINTAINERS: add keyboard driver to Hyper-V file list
x86, mm: do not leak page->ptl for pmd page tables
ipc,shm: correct error return value in shmctl (SHM_UNLOCK)
mm, mempolicy: silence gcc warning
block/partitions/efi.c: fix bound check
ARM: drivers/rtc/rtc-at91rm9200.c: disable interrupts at shutdown
mm: hugetlbfs: fix hugetlbfs optimization
kernel: remove CONFIG_USE_GENERIC_SMP_HELPERS cleanly
ipc,shm: fix shm_file deletion races
mm: thp: give transparent hugepage code a separate copy_page
checkpatch: fix "Use of uninitialized value" warnings
configfs: fix race between dentry put and lookup
gso: handle new frag_list of frags GRO packets
GFS2: Fix ref count bug relating to atomic_open
genetlink: fix genl_set_err() group ID
genetlink: fix genlmsg_multicast() bug
...

show more ...

Merge tag 'v3.13-rc1' into asoc-arizona

Linux 3.13-rc1

Merge branch 'next' into for-linus

Merge first round of changes for 3.13 merge window.

Merge branch 'linus' into perf/urgent

Merge dependencies to apply a fix.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'pm+acpi-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael J Wysocki:

- New power capping framework and the th

Merge tag 'pm+acpi-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael J Wysocki:

- New power capping framework and the the Intel Running Average Power
Limit (RAPL) driver using it from Srinivas Pandruvada and Jacob Pan.

- Addition of the in-kernel switching feature to the arm_big_little
cpufreq driver from Viresh Kumar and Nicolas Pitre.

- cpufreq support for iMac G5 from Aaro Koskinen.

- Baytrail processors support for intel_pstate from Dirk Brandewie.

- cpufreq support for Midway/ECX-2000 from Mark Langsdorf.

- ARM vexpress/TC2 cpufreq support from Sudeep KarkadaNagesha.

- ACPI power management support for the I2C and SPI bus types from Mika
Westerberg and Lv Zheng.

- cpufreq core fixes and cleanups from Viresh Kumar, Srivatsa S Bhat,
Stratos Karafotis, Xiaoguang Chen, Lan Tianyu.

- cpufreq drivers updates (mostly fixes and cleanups) from Viresh
Kumar, Aaro Koskinen, Jungseok Lee, Sudeep KarkadaNagesha, Lukasz
Majewski, Manish Badarkhe, Hans-Christian Egtvedt, Evgeny Kapaev.

- intel_pstate updates from Dirk Brandewie and Adrian Huang.

- ACPICA update to version 20130927 includig fixes and cleanups and
some reduction of divergences between the ACPICA code in the kernel
and ACPICA upstream in order to improve the automatic ACPICA patch
generation process. From Bob Moore, Lv Zheng, Tomasz Nowicki, Naresh
Bhat, Bjorn Helgaas, David E Box.

- ACPI IPMI driver fixes and cleanups from Lv Zheng.

- ACPI hotplug fixes and cleanups from Bjorn Helgaas, Toshi Kani, Zhang
Yanfei, Rafael J Wysocki.

- Conversion of the ACPI AC driver to the platform bus type and
multiple driver fixes and cleanups related to ACPI from Zhang Rui.

- ACPI processor driver fixes and cleanups from Hanjun Guo, Jiang Liu,
Bartlomiej Zolnierkiewicz, Mathieu Rhéaume, Rafael J Wysocki.

- Fixes and cleanups and new blacklist entries related to the ACPI
video support from Aaron Lu, Felipe Contreras, Lennart Poettering,
Kirill Tkhai.

- cpuidle core cleanups from Viresh Kumar and Lorenzo Pieralisi.

- cpuidle drivers fixes and cleanups from Daniel Lezcano, Jingoo Han,
Bartlomiej Zolnierkiewicz, Prarit Bhargava.

- devfreq updates from Sachin Kamat, Dan Carpenter, Manish Badarkhe.

- Operation Performance Points (OPP) core updates from Nishanth Menon.

- Runtime power management core fix from Rafael J Wysocki and update
from Ulf Hansson.

- Hibernation fixes from Aaron Lu and Rafael J Wysocki.

- Device suspend/resume lockup detection mechanism from Benoit Goby.

- Removal of unused proc directories created for various ACPI drivers
from Lan Tianyu.

- ACPI LPSS driver fix and new device IDs for the ACPI platform scan
handler from Heikki Krogerus and Jarkko Nikula.

- New ACPI _OSI blacklist entry for Toshiba NB100 from Levente Kurusa.

- Assorted fixes and cleanups related to ACPI from Andy Shevchenko, Al
Stone, Bartlomiej Zolnierkiewicz, Colin Ian King, Dan Carpenter,
Felipe Contreras, Jianguo Wu, Lan Tianyu, Yinghai Lu, Mathias Krause,
Liu Chuansheng.

- Assorted PM fixes and cleanups from Andy Shevchenko, Thierry Reding,
Jean-Christophe Plagniol-Villard.

* tag 'pm+acpi-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (386 commits)
cpufreq: conservative: fix requested_freq reduction issue
ACPI / hotplug: Consolidate deferred execution of ACPI hotplug routines
PM / runtime: Use pm_runtime_put_sync() in __device_release_driver()
ACPI / event: remove unneeded NULL pointer check
Revert "ACPI / video: Ignore BIOS initial backlight value for HP 250 G1"
ACPI / video: Quirk initial backlight level 0
ACPI / video: Fix initial level validity test
intel_pstate: skip the driver if ACPI has power mgmt option
PM / hibernate: Avoid overflow in hibernate_preallocate_memory()
ACPI / hotplug: Do not execute "insert in progress" _OST
ACPI / hotplug: Carry out PCI root eject directly
ACPI / hotplug: Merge device hot-removal routines
ACPI / hotplug: Make acpi_bus_hot_remove_device() internal
ACPI / hotplug: Simplify device ejection routines
ACPI / hotplug: Fix handle_root_bridge_removal()
ACPI / hotplug: Refuse to hot-remove all objects with disabled hotplug
ACPI / scan: Start matching drivers after trying scan handlers
ACPI: Remove acpi_pci_slot_init() headers from internal.h
ACPI / blacklist: fix name of ThinkPad Edge E530
PowerCap: Fix build error with option -Werror=format-security
...

Conflicts:
arch/arm/mach-omap2/opp.c
drivers/Kconfig
drivers/spi/spi.c

show more ...

Merge branch 'pm-cpuidle'

* pm-cpuidle:
ARM: AT91: DT: pm: Select ram controller standby based on DT
ARM: AT91: pm: Factorize standby function
ARM: at91: cpuidle: Move driver to drivers/cpuidl

Merge branch 'pm-cpuidle'

* pm-cpuidle:
ARM: AT91: DT: pm: Select ram controller standby based on DT
ARM: AT91: pm: Factorize standby function
ARM: at91: cpuidle: Move driver to drivers/cpuidle
ARM: at91: cpuidle: Convert to platform driver
ARM: ux500: cpuidle: fix section mismatch
ARM: zynq: cpuidle: convert to platform driver
ARM: zynq: cpuidle: Remove useless compatibility string
drivers: cpuidle: rename ARM big.LITTLE driver config and makefile entries
ARM: EXYNOS: convert cpuidle driver to be a platform driver
intel_idle: mark some functions with __init tag
intel_idle: mark states tables with __initdata tag
intel_idle: shrink states tables

show more ...

Merge branch 'cpuidle/arm-next' of git://git.linaro.org/people/dlezcano/linux into pm-cpuidle

Pull cpuidle updates for v3.13 from Daniel Lezcano:

- Daniel Lezcano converted cpuidle to a platform_d

Merge branch 'cpuidle/arm-next' of git://git.linaro.org/people/dlezcano/linux into pm-cpuidle

Pull cpuidle updates for v3.13 from Daniel Lezcano:

- Daniel Lezcano converted cpuidle to a platform_driver for at91.
The standby callback is stored in the platform_device's data
field as a callback for the driver, so the pm specific code and
the backend driver have no more dependency. Each SoC init function
fills the right callback at init time. As there are no more
dependency, we can move the driver in the drivers/cpuidle directory.

- Jean-Christophe Plagnol-Villard and Nicolas Ferre made a cleanup on
top of the patch described above and fixed up the ddr standby callback
so more SoC are supported. Even if the modifications are in the
mach-at91 directory, they asked these patches to be included through
the PM tree as they depend on the platform_driver conversion.

* 'cpuidle/arm-next' of git://git.linaro.org/people/dlezcano/linux:
ARM: AT91: DT: pm: Select ram controller standby based on DT
ARM: AT91: pm: Factorize standby function
ARM: at91: cpuidle: Move driver to drivers/cpuidle
ARM: at91: cpuidle: Convert to platform driver

show more ...

ARM: AT91: DT: pm: Select ram controller standby based on DT

Move non-dt selection to ioremap_registers init which is only called not
non-dt board.

So we can support sam9n12/sam9x5/sama5d3 too.

Si

ARM: AT91: DT: pm: Select ram controller standby based on DT

Move non-dt selection to ioremap_registers init which is only called not
non-dt board.

So we can support sam9n12/sam9x5/sama5d3 too.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

show more ...

ARM: at91: cpuidle: Convert to platform driver

Using the platform driver model is a good way to separate the cpuidle specific
code from the low level pm code. It allows to remove the dependency betw

ARM: at91: cpuidle: Convert to platform driver

Using the platform driver model is a good way to separate the cpuidle specific
code from the low level pm code. It allows to remove the dependency between
these two components.

The platform_device is located in the pm code and a 'set' function has been
added to set the standby function from the AT91_SOC_START initialization
function. Each SoC with a cpuidle driver will set the standby function in the
platform_data field at init time. Then pm code will register the cpuidle
platform device.

The cpuidle driver will register the platform_driver and use the device's
platform_data as a standby callback in the idle path.

The at91_pm_enter function contains a { if then else } based on cpu_is_xx
similar to what was in cpuidle. This is considered dangerous when adding a new
SoC. Like the cpuidle driver, a standby ops is defined and assigned when the
SoC init function specifies what is its standby function and reused in the
at91_pm_enter's 'case' block.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

show more ...

Merge tag 'v3.11' into next

Merge with mainline to bring in sync changes to cyttsp4 driver.

Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux

Merge upstream tree in order to reinstate crct10dif.

Merge branch 'master' into for-3.12/upstream

Sync with Linus' tree to be able to apply fixup patch on top
of 9d9a04ee75 ("HID: apple: Add support for the 2013 Macbook Air")

Signed-off-by: Jiri Kosi

Merge branch 'master' into for-3.12/upstream

Sync with Linus' tree to be able to apply fixup patch on top
of 9d9a04ee75 ("HID: apple: Add support for the 2013 Macbook Air")

Signed-off-by: Jiri Kosina <jkosina@suse.cz>

show more ...

Merge remote-tracking branch 'origin/next' into kvm-ppc-next

Conflicts:
mm/Kconfig

CMA DMA split and ZSWAP introduction were conflicting, fix up manually.