Merge tag 'v5.8-rc1' into regulator-5.8

Linux 5.8-rc1

Merge tag 'v5.8-rc1' into fixes

Linux 5.8-rc1

Merge v5.8-rc1 into drm-misc-fixes

Beginning a new release cycles for what will become v5.8. Updating
drm-misc-fixes accordingly.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'dt/schema-cleanups' into dt/linus

Merge branch 'x86/entry' into ras/core

to fixup conflicts in arch/x86/kernel/cpu/mce/core.c so MCE specific follow
up patches can be applied without creating a horrible merge conflict
afterwards.

Merge branch 'fixes-v5.7' into fixes

Merge branch 'next' into for-linus

Prepare input updates for 5.8 merge window.

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
Augusto von D

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
Augusto von Dentz.

2) Add GSO partial support to igc, from Sasha Neftin.

3) Several cleanups and improvements to r8169 from Heiner Kallweit.

4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
device self-test. From Andrew Lunn.

5) Start moving away from custom driver versions, use the globally
defined kernel version instead, from Leon Romanovsky.

6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.

7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.

8) Add sriov and vf support to hinic, from Luo bin.

9) Support Media Redundancy Protocol (MRP) in the bridging code, from
Horatiu Vultur.

10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.

11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
Dubroca. Also add ipv6 support for espintcp.

12) Lots of ReST conversions of the networking documentation, from Mauro
Carvalho Chehab.

13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
from Doug Berger.

14) Allow to dump cgroup id and filter by it in inet_diag code, from
Dmitry Yakunin.

15) Add infrastructure to export netlink attribute policies to
userspace, from Johannes Berg.

16) Several optimizations to sch_fq scheduler, from Eric Dumazet.

17) Fallback to the default qdisc if qdisc init fails because otherwise
a packet scheduler init failure will make a device inoperative. From
Jesper Dangaard Brouer.

18) Several RISCV bpf jit optimizations, from Luke Nelson.

19) Correct the return type of the ->ndo_start_xmit() method in several
drivers, it's netdev_tx_t but many drivers were using
'int'. From Yunjian Wang.

20) Add an ethtool interface for PHY master/slave config, from Oleksij
Rempel.

21) Add BPF iterators, from Yonghang Song.

22) Add cable test infrastructure, including ethool interfaces, from
Andrew Lunn. Marvell PHY driver is the first to support this
facility.

23) Remove zero-length arrays all over, from Gustavo A. R. Silva.

24) Calculate and maintain an explicit frame size in XDP, from Jesper
Dangaard Brouer.

25) Add CAP_BPF, from Alexei Starovoitov.

26) Support terse dumps in the packet scheduler, from Vlad Buslov.

27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.

28) Add devm_register_netdev(), from Bartosz Golaszewski.

29) Minimize qdisc resets, from Cong Wang.

30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
eliminate set_fs/get_fs calls. From Christoph Hellwig.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
selftests: net: ip_defrag: ignore EPERM
net_failover: fixed rollback in net_failover_open()
Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
vmxnet3: allow rx flow hash ops only when rss is enabled
hinic: add set_channels ethtool_ops support
selftests/bpf: Add a default $(CXX) value
tools/bpf: Don't use $(COMPILE.c)
bpf, selftests: Use bpf_probe_read_kernel
s390/bpf: Use bcr 0,%0 as tail call nop filler
s390/bpf: Maintain 8-byte stack alignment
selftests/bpf: Fix verifier test
selftests/bpf: Fix sample_cnt shared between two threads
bpf, selftests: Adapt cls_redirect to call csum_level helper
bpf: Add csum_level helper for fixing up csum levels
bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
crypto/chtls: IPv6 support for inline TLS
Crypto/chcr: Fixes a coccinile check error
Crypto/chcr: Fixes compilations warnings
...

show more ...

Merge branches 'for-5.7/upstream-fixes', 'for-5.8/apple', 'for-5.8/asus', 'for-5.8/core', 'for-5.8/intel-ish', 'for-5.8/logitech', 'for-5.8/mcp2221' and 'for-5.8/multitouch' into for-linus

Merge branch 'devlink-Add-support-for-control-packet-traps'

Ido Schimmel says:

====================
devlink: Add support for control packet traps

So far device drivers were only able to register d

Merge branch 'devlink-Add-support-for-control-packet-traps'

Ido Schimmel says:

====================
devlink: Add support for control packet traps

So far device drivers were only able to register drop and exception
packet traps with devlink. These traps are used for packets that were
either dropped by the underlying device or encountered an exception
(e.g., missing neighbour entry) during forwarding.

However, in the steady state, the majority of the packets being trapped
to the CPU are packets that are required for the correct functioning of
the control plane. For example, ARP request and IGMP query packets.

This patch set allows device drivers to register such control traps with
devlink and expose their default control plane policy to user space.
User space can then tune the packet trap policer settings according to
its needs, as with existing packet traps.

In a similar fashion to exception traps, the action associated with such
traps cannot be changed as it can easily break the control plane. Unlike
drop and exception traps, packets trapped via control traps are not
reported to the kernel's drop monitor as they are not indicative of any
problem.

Patch set overview:

Patches #1-#3 break out layer 3 exceptions to a different group to
provide better granularity. A future patch set will make this completely
configurable.

Patch #4 adds a new trap action ('mirror') that is used for packets that
are forwarded by the device and sent to the CPU. Such packets are marked
by device drivers with 'skb->offload_fwd_mark = 1' in order to prevent
the kernel from forwarding them again.

Patch #5 adds the new trap type, 'control'.

Patches #6-#8 gradually add various control traps to devlink with proper
documentation.

Patch #9 adds a few control traps to netdevsim, which are automatically
exercised by existing devlink-trap selftest.

Patches #10 performs small refactoring in mlxsw.

Patches #11-#13 change mlxsw to register its existing control traps with
devlink.

Patch #14 adds a selftest over mlxsw that exercises all the registered
control traps.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

devlink: Add ACL control packet traps

Add packet traps for packets that are sampled / trapped by ACLs, so that
capable drivers could register them with devlink. Add documentation for
every added pac

devlink: Add ACL control packet traps

Add packet traps for packets that are sampled / trapped by ACLs, so that
capable drivers could register them with devlink. Add documentation for
every added packet trap and packet trap group.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

devlink: Add layer 3 control packet traps

Add layer 3 control packet traps such as ARP and DHCP, so that capable
device drivers could register them with devlink. Add documentation for
every added pa

devlink: Add layer 3 control packet traps

Add layer 3 control packet traps such as ARP and DHCP, so that capable
device drivers could register them with devlink. Add documentation for
every added packet trap and packet trap group.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

devlink: Add layer 2 control packet traps

Add layer 2 control packet traps such as STP and IGMP query, so that
capable device drivers could register them with devlink. Add
documentation for every ad

devlink: Add layer 2 control packet traps

Add layer 2 control packet traps such as STP and IGMP query, so that
capable device drivers could register them with devlink. Add
documentation for every added packet trap and packet trap group.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

devlink: Add 'control' trap type

This type is used for traps that trap control packets such as ARP
request and IGMP query to the CPU.

Do not report such packets to the kernel's drop monitor as they

devlink: Add 'control' trap type

This type is used for traps that trap control packets such as ARP
request and IGMP query to the CPU.

Do not report such packets to the kernel's drop monitor as they were not
dropped by the device no encountered an exception during forwarding.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

devlink: Add 'mirror' trap action

The action is used by control traps such as IGMP query. The packet is
flooded by the device, but also trapped to the CPU in order for the
software bridge to mark th

devlink: Add 'mirror' trap action

The action is used by control traps such as IGMP query. The packet is
flooded by the device, but also trapped to the CPU in order for the
software bridge to mark the receiving port as a multicast router port.
Such packets are marked with 'skb->offload_fwd_mark = 1' in order to
prevent the software bridge from flooding them again.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

devlink: Create dedicated trap group for layer 3 exceptions

Packets that hit exceptions during layer 3 forwarding must be trapped to
the CPU for the control plane to function properly. Create a dedi

devlink: Create dedicated trap group for layer 3 exceptions

Packets that hit exceptions during layer 3 forwarding must be trapped to
the CPU for the control plane to function properly. Create a dedicated
group for them, so that user space could choose to assign a different
policer for them.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge branch 'for-5.8' into for-linus

Merge tag 'v5.7-rc7' into devel

Linux 5.7-rc7

Merge branch 'timers/drivers/timer-ti' into timers/drivers/next

Merge tag 'v5.7-rc6' into rdma.git for-next

Linux 5.7-rc6

Conflict in drivers/net/ethernet/mellanox/mlx5/core/steering/dr_send.c
resolved by deleting dr_cq_event, matching how netdev resolved it.

Merge tag 'v5.7-rc6' into rdma.git for-next

Linux 5.7-rc6

Conflict in drivers/net/ethernet/mellanox/mlx5/core/steering/dr_send.c
resolved by deleting dr_cq_event, matching how netdev resolved it.

Required for dependencies in the following patches.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

show more ...

Merge branch 'i2c/for-current-fixed' into i2c/for-5.8

Merge branch 'kvm-amd-fixes' into HEAD

Merge tag 'v5.6' into next

Sync up with mainline to get device tree and other changes.

Merge branch 'for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu

Pull RCU updates from Paul McKenney:

1. Miscellaneous fixes.
2. kfree_rcu() updates.

Merge branch 'for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu

Pull RCU updates from Paul McKenney:

1. Miscellaneous fixes.
2. kfree_rcu() updates.
3. Remove scheduler locking restriction
4. RCU-tasks update, including addition of RCU Tasks Trace for
BPF use and RCU Tasks Rude. (This branch is on top of #3 due
to overlap of changed code.)
5. RCU CPU stall warning updates.
6. Torture-test updates.

show more ...

Merge tag 'tags/linear-ranges-lib' into psy-next

lib: Add linear ranges helper library and start using it

Series extracts a "linear ranges" helper out of the regulator
framework. Linear ranges help

Merge tag 'tags/linear-ranges-lib' into psy-next

lib: Add linear ranges helper library and start using it

Series extracts a "linear ranges" helper out of the regulator
framework. Linear ranges helper is intended to help converting
real-world values to register values when conversion is linear. I
suspect this is useful also for power subsystem and possibly for clk.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

show more ...