Revision tags: v6.1.27 |
|
#
e81507ac |
| 29-Apr-2023 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd: "Nothing looks out of the ordinary in this batch of clk driver updates.
T
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd: "Nothing looks out of the ordinary in this batch of clk driver updates.
There are a couple patches to the core clk framework, but they're all basically cleanups or debugging aids. The driver updates and new additions are dominated in the diffstat by Qualcomm and MediaTek drivers. Qualcomm gained a handful of new drivers for various SoCs, and MediaTek gained a bunch of drivers for MT8188. The MediaTek drivers are being modernized as well, so there are updates all over that vendor's clk drivers. There's also a couple other new clk drivers in here, for example the Starfive JH7110 SoC support is added.
Outside of the two major SoC vendors though, we have the usual collection of non-critical fixes and cleanups to various clk drivers. It's good to see that we're getting more cleanups and modernization patches. Maybe one day we'll be able to properly split clk providers from clk consumers.
Core: - Print an informational message before disabling unused clks
New Drivers: - BCM63268 timer clock and reset controller - Frequency Hopping (FHCTL) on MediaTek MT6795, MT8173, MT8192 and MT8195 SoCs - Mediatek MT8188 SoC clk drivers - Clock driver for Sunplus SP7021 SoC - Clk driver support for Loongson-2 SoCs - Clock driver for Skyworks Si521xx I2C PCIe clock generators - Initial Starfive JH7110 clk/reset support - Global clock controller drivers for Qualcomm SM7150, IPQ9574, MSM8917 and IPQ5332 SoCs - GPU clock controller drivers for SM6115, SM6125, SM6375 and SA8775P SoCs
Updates: - Shrink size of clk_fractional_divider a little - Convert various clk drivers to devm_of_clk_add_hw_provider() - Convert platform clk drivers to remove_new() - Converted most Mediatek clock drivers to struct platform_driver - MediaTek clock drivers can be built as modules - Reimplement Loongson-1 clk driver with DT support - Migrate socfpga clk driver to of_clk_add_hw_provider() - Support for i3c clks on Aspeed ast2600 SoCs - Add clock generic devm_clk_hw_register_gate_parent_data - Add audiomix block control for i.MX8MP - Add support for determine_rate to i.MX composite-8m - Let the LCDIF Pixel clock of i.MX8MM and i.MX8MN set parent rate - Provide clock name in error message for clk-gpr-mux on get parent failure - Drop duplicate imx_clk_mux_flags macro - Register the i.MX8MP Media Disp2 Pix clock as bus clock - Add Media LDB root clock to i.MX8MP - Make i.MX8MP nand_usdhc_bus clock as non-critical - Fix the rate table for i.MX fracn-gppll - Disable HW control for the fracn-gppll in order to be controlled by register write - Add support for interger PLL in fracn-gppll - Add mcore_booted module parameter to i.MX93 provider - Add NIC, A55 and ARM PLL clocks to i.MX93 - Fix i.MX8ULP XBAR_DIVBUS and AD_SLOW clock parents - Use "divider closest" clock type for PLL4_PFD dividers on i.MX8ULP to get more accurate clock rates - Mark the MU0_Bi and TPM5 clocks on i.MX8ULP as critical - Update some of the i.MX critical clocks flags to allow glitchless on-the-fly rate change. - Add I2C5 clock on Renesas R-Car V3H - Exynos850: Add CMU_G3D clock controller for the Mali GPU - Extract Exynos5433 (ARM64) clock controller power management code to common driver parts - Exynos850: make PMU_ALIVE_PCLK clock critical - Add Audio, thermal, camera (CSI-2), Image Signal Processor/Channel Selector (ISPCS), and video capture (VIN) clocks on Renesas R-Car V4H - Add video capture (VIN) clocks on Renesas R-Car V3H - Add Cortex-A53 System CPU (Z2) clocks on Renesas R-Car V3M and V3H - Support for Stromer Plus PLL on Qualcomm IPQ5332 - Add a missing reset to Qualcomm QCM2290 - Migrate Qualcomm IPQ4019 to clk_parent_data - Make USB GDSCs enter retention state when disabled on Qualcomm SM6375, MSM8996 and MSM8998 SoCs - Set floor rounding clk_ops for Qualcomm QCM2290 SDCC2 clk - Add two EMAC GDSCs on Qualcomm SC8280XP - Use shared rcg clk ops in Qualcomm SM6115 GCC - Park Qualcomm SM8350 PCIe PIPE clks when disabled - Add GDSCs to Qualcomm SC7280 LPASS audio clock controller - Add missing XO clocks to Qualcomm MSM8226 and MSM8974 - Convert some Qualcomm clk DT bindings to YAML - Reparenting fix for the clock supplying camera modules on Rockchip rk3399 - Mark more critical (bus-)clocks on Rockchip rk3588"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (290 commits) clk: qcom: gcc-sc8280xp: Add EMAC GDSCs clk: starfive: Delete the redundant dev_set_drvdata() in JH7110 clock drivers clk: rockchip: rk3588: make gate linked clocks critical clk: qcom: dispcc-qcm2290: Remove inexistent DSI1PHY clk clk: qcom: add the GPUCC driver for sa8775p dt-bindings: clock: qcom: describe the GPUCC clock for SA8775P clk: qcom: gcc-sm8350: fix PCIe PIPE clocks handling clk: qcom: lpassaudiocc-sc7280: Add required gdsc power domain clks in lpass_cc_sc7280_desc clk: qcom: lpasscc-sc7280: Skip qdsp6ss clock registration dt-bindings: clock: qcom,sc7280-lpasscc: Add qcom,adsp-pil-mode property clk: starfive: Avoid casting iomem pointers clk: microchip: fix potential UAF in auxdev release callback clk: qcom: rpm: Use managed `of_clk_add_hw_provider()` clk: mediatek: fhctl: Mark local variables static clk: sifive: make SiFive clk drivers depend on ARCH_ symbols clk: uniphier: Use managed `of_clk_add_hw_provider()` clk: si5351: Use managed `of_clk_add_hw_provider()` clk: si570: Use managed `of_clk_add_hw_provider()` clk: si514: Use managed `of_clk_add_hw_provider()` clk: lmk04832: Use managed `of_clk_add_hw_provider()` ...
show more ...
|
#
cdc780f0 |
| 26-Apr-2023 |
Jiri Kosina <jkosina@suse.cz> |
Merge branch 'for-6.4/amd-sfh' into for-linus
- assorted functional fixes for amd-sfh driver (Basavaraj Natikar)
|
Revision tags: v6.1.26 |
|
#
c19c6c7b |
| 25-Apr-2023 |
Stephen Boyd <sboyd@kernel.org> |
Merge branches 'clk-of', 'clk-samsung', 'clk-rockchip' and 'clk-qcom' into clk-next
* clk-of: clk: add missing of_node_put() in "assigned-clocks" property parsing
* clk-samsung: clk: samsung: e
Merge branches 'clk-of', 'clk-samsung', 'clk-rockchip' and 'clk-qcom' into clk-next
* clk-of: clk: add missing of_node_put() in "assigned-clocks" property parsing
* clk-samsung: clk: samsung: exynos850: Make PMU_ALIVE_PCLK critical clk: samsung: Convert to platform remove callback returning void clk: samsung: exynos5433: Extract PM support to common ARM64 layer clk: samsung: Extract parent clock enabling to common function clk: samsung: Extract clocks registration to common function clk: samsung: exynos850: Add AUD and HSI main gate clocks clk: samsung: exynos850: Implement CMU_G3D domain clk: samsung: clk-pll: Implement pll0818x PLL type clk: samsung: Set dev in samsung_clk_init() clk: samsung: Don't pass reg_base to samsung_clk_register_pll() clk: samsung: Remove np argument from samsung_clk_init() dt-bindings: clock: exynos850: Add AUD and HSI main gate clocks dt-bindings: clock: exynos850: Add Exynos850 CMU_G3D
* clk-rockchip: clk: rockchip: rk3588: make gate linked clocks critical clk: rockchip: rk3399: allow clk_cifout to force clk_cifout_src to reparent
* clk-qcom: (57 commits) clk: qcom: gcc-sc8280xp: Add EMAC GDSCs clk: qcom: dispcc-qcm2290: Remove inexistent DSI1PHY clk clk: qcom: add the GPUCC driver for sa8775p dt-bindings: clock: qcom: describe the GPUCC clock for SA8775P clk: qcom: gcc-sm8350: fix PCIe PIPE clocks handling clk: qcom: lpassaudiocc-sc7280: Add required gdsc power domain clks in lpass_cc_sc7280_desc clk: qcom: lpasscc-sc7280: Skip qdsp6ss clock registration dt-bindings: clock: qcom,sc7280-lpasscc: Add qcom,adsp-pil-mode property clk: qcom: rpm: Use managed `of_clk_add_hw_provider()` clk: qcom: Add Global Clock Controller driver for IPQ9574 dt-bindings: clock: Add ipq9574 clock and reset definitions clk: qcom: gpucc-sm6375: Configure CX_GDSC disable wait value clk: qcom: gcc-sm6115: Mark RCGs shared where applicable clk: qcom: dispcc-qcm2290: Add MDSS_CORE reset dt-bindings: clock: dispcc-qcm2290: Add MDSS_CORE reset clk: qcom: apss-ipq-pll: add support for IPQ5332 dt-bindings: clock: qcom,a53pll: add IPQ5332 compatible clk: qcom: apss-ipq-pll: refactor the driver to accommodate different PLL types dt-bindings: mailbox: qcom,apcs-kpss-global: fix SDX55 'if' match dt-bindings: mailbox: qcom,apcs-kpss-global: correct SDX55 clocks ...
show more ...
|
#
ea90f303 |
| 24-Apr-2023 |
Stephen Boyd <sboyd@kernel.org> |
Merge tag 'qcom-clk-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-qcom
Pull Qualcomm clk driver updates from Bjorn Andersson:
New drivers for Global clock controll
Merge tag 'qcom-clk-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-qcom
Pull Qualcomm clk driver updates from Bjorn Andersson:
New drivers for Global clock controller on SM7150, IPQ9574, MSM8917 and IPQ5332 are added. New GPU clock controllers for SM6115, SM6125, SM6375 and SA8775P are added.
The APSS IPQ PLL driver is refactored to support different PLL types, support for the Stromer Plus PLL type is added, and support for IPQ5332 is introduced.
Helpers for settings sleep, wake and retain bits of CBCR registers are introduced and used in some of the newly introduced GPU clock drivers.
The platform_driver remove callbacks is transitioned to remove_new, as part of the system wide cleanup effort.
In the Display clock controller for QCM2290, the MDSS_CORE reset is introduced and the non-existent DSI1PHY clock is removed.
IPQ4019 Global clock controller is transitioned to parent_data.
USB GDSCs in SM6375, MSM8996 and MSM8998 are changed to use retention as disabled state, to avoid collapsing them during suspend. The CX GDSC in the SM6375 GPU clock controller has it's disable-wait value corrected.
QCM2290 SDCC2 src clock moves to floor_ops.
The two EMAC GDSCs are added for SC8280XP.
Relevant RCGs in the SM6115 Global clock controller are moved to use shared_ops.
PCIe PIPE clock operations on SM8350 are updated, to ensure the mux is parked when the parent PLL is disabled.
GDSCs are added to the SC7280 LPASS audio clock controller.
The RPM clock controller is transitioned to use the managed version of of_clk_add_hw_provider(). Missing XO clocks are added to MSM8226 and MSM8974.
DeviceTree bindings are added for the various newly supported clock controllers, the binding for KPSS ACC and GCC drivers are converted to YAML and a few fixes are introduced.
* tag 'qcom-clk-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (57 commits) clk: qcom: gcc-sc8280xp: Add EMAC GDSCs clk: qcom: dispcc-qcm2290: Remove inexistent DSI1PHY clk clk: qcom: add the GPUCC driver for sa8775p dt-bindings: clock: qcom: describe the GPUCC clock for SA8775P clk: qcom: gcc-sm8350: fix PCIe PIPE clocks handling clk: qcom: lpassaudiocc-sc7280: Add required gdsc power domain clks in lpass_cc_sc7280_desc clk: qcom: lpasscc-sc7280: Skip qdsp6ss clock registration dt-bindings: clock: qcom,sc7280-lpasscc: Add qcom,adsp-pil-mode property clk: qcom: rpm: Use managed `of_clk_add_hw_provider()` clk: qcom: Add Global Clock Controller driver for IPQ9574 dt-bindings: clock: Add ipq9574 clock and reset definitions clk: qcom: gpucc-sm6375: Configure CX_GDSC disable wait value clk: qcom: gcc-sm6115: Mark RCGs shared where applicable clk: qcom: dispcc-qcm2290: Add MDSS_CORE reset dt-bindings: clock: dispcc-qcm2290: Add MDSS_CORE reset clk: qcom: apss-ipq-pll: add support for IPQ5332 dt-bindings: clock: qcom,a53pll: add IPQ5332 compatible clk: qcom: apss-ipq-pll: refactor the driver to accommodate different PLL types dt-bindings: mailbox: qcom,apcs-kpss-global: fix SDX55 'if' match dt-bindings: mailbox: qcom,apcs-kpss-global: correct SDX55 clocks ...
show more ...
|
Revision tags: v6.3, v6.1.25, v6.1.24 |
|
#
daa9e76d |
| 11-Apr-2023 |
Bartosz Golaszewski <bartosz.golaszewski@linaro.org> |
dt-bindings: clock: qcom: describe the GPUCC clock for SA8775P
Add the compatible for the Qualcomm Graphics Clock control module present on sa8775p platforms. It matches the generic QCom GPUCC descr
dt-bindings: clock: qcom: describe the GPUCC clock for SA8775P
Add the compatible for the Qualcomm Graphics Clock control module present on sa8775p platforms. It matches the generic QCom GPUCC description. Add device-specific DT bindings defines as well.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230411125910.401075-2-brgl@bgdev.pl
show more ...
|
#
ea68a3e9 |
| 11-Apr-2023 |
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> |
Merge drm/drm-next into drm-intel-gt-next
Need to pull in commit from drm-next (earlier in drm-intel-next):
1eca0778f4b3 ("drm/i915: add struct i915_dsm to wrap dsm members together")
In order to
Merge drm/drm-next into drm-intel-gt-next
Need to pull in commit from drm-next (earlier in drm-intel-next):
1eca0778f4b3 ("drm/i915: add struct i915_dsm to wrap dsm members together")
In order to merge following patch to drm-intel-gt-next:
https://patchwork.freedesktop.org/patch/530942/?series=114925&rev=6
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
show more ...
|
Revision tags: v6.1.23, v6.1.22 |
|
#
cecdd52a |
| 28-Mar-2023 |
Rodrigo Vivi <rodrigo.vivi@intel.com> |
Merge drm/drm-next into drm-intel-next
Catch up with 6.3-rc cycle...
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
Revision tags: v6.1.21 |
|
#
e752ab11 |
| 20-Mar-2023 |
Rob Clark <robdclark@chromium.org> |
Merge remote-tracking branch 'drm/drm-next' into msm-next
Merge drm-next into msm-next to pick up external clk and PM dependencies for improved a6xx GPU reset sequence.
Signed-off-by: Rob Clark <ro
Merge remote-tracking branch 'drm/drm-next' into msm-next
Merge drm-next into msm-next to pick up external clk and PM dependencies for improved a6xx GPU reset sequence.
Signed-off-by: Rob Clark <robdclark@chromium.org>
show more ...
|
#
d26a3a6c |
| 17-Mar-2023 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge tag 'v6.3-rc2' into next
Merge with mainline to get of_property_present() and other newer APIs.
|
Revision tags: v6.1.20, v6.1.19 |
|
#
b3c9a041 |
| 13-Mar-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
Merge drm/drm-fixes into drm-misc-fixes
Backmerging to get latest upstream.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
#
a1eccc57 |
| 13-Mar-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
Merge drm/drm-next into drm-misc-next
Backmerging to get v6.3-rc1 and sync with the other DRM trees.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
Revision tags: v6.1.18, v6.1.17 |
|
#
b8fa3e38 |
| 10-Mar-2023 |
Arnaldo Carvalho de Melo <acme@redhat.com> |
Merge remote-tracking branch 'acme/perf-tools' into perf-tools-next
To pick up perf-tools fixes just merged upstream.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
Revision tags: v6.1.16, v6.1.15 |
|
#
1ec35ead |
| 25-Feb-2023 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd: "We have one small patch to the clk core this time around. It fixes a corn
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd: "We have one small patch to the clk core this time around. It fixes a corner case with the CLK_OPS_PARENT_ENABLE flag combined with clk_core_is_enabled() where it hangs the system. We'll simply assume the clk is disabled if the parent is disabled and the flag is set. Trying to turn on the parent to check the enable state of the clk runs into system hangs at boot. We let this bake in -next for a couple weeks to make sure there aren't any more issues because the last attempt to fix this ran into hangs and had to be reverted.
Note: There were some more patches to the core framework around sync_state and disabling unused clks, but I asked for that to be reverted from the qcom PR because it isn't ready and we're still discussing the best solution on the list.
Outside of the core clk framework, we have the usual collection of clk driver updates and support for new SoCs (which seems to never stop). The dirstat is dominated by Qualcomm because they added support for quite a few SoCs this time around and also migrated quite a few of their drivers to clk_parent_data. The other big diff is in the Mediatek clk drivers that saw a significant rework this cycle to similarly modernize the code, and we'll see that work continue in the next cycle as well. Nothing really jumps out as scary here, except that the significant churn in parent data descriptions can have typos that go unnoticed. More details below.
Core: - Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()
New Drivers: - Add a new clk-gpr-mux clock type and use it on i.MX6Q to add ENET ref clocks - Support for Mediatek MT7891 SoC clks - Support for many Qualcomm clk controllers: - QDU1000/QRU1000 global clock controller - SA8775P global clock controller - SM8550 TCSR and display clock controller - SM6350 clock controller - MSM8996 CBF and APCS clock controllers
Updates: - Various cleanups and improvements to Mediatek clk drivers to reduce code size and modernize the drivers - Support for Versa 5P49V60 clks - Disable R-Car H3 ES1.*, as it was only available to an internal development group and needed a lot of quirks and workarounds - Add PWM, Compare-Match Timer (TIM), USB, SDHI, and eMMC clocks and resets on Renesas RZ/V2M - Add display clocks on Renesas R-Car V4H - Add Camera Receiving Unit (CRU) clocks and resets on Renesas RZ/G2L - Free the imx_uart_clocks even if imx_register_uart_clocks returns early - Get the stdout clocks count from device tree on i.MX - Drop the clock count argument from imx_register_uart_clocks() - Keep the uart clocks on i.MX93 for when earlycon is used - Fix SPDX comment in i.MX6SLL clocks bindings header - Drop some unnecessary spaces from i.MX8ULP clocks bindings header - Add imx_obtain_fixed_of_clock() for allowing to add a clock that is not configured via devicetree - Fix the ENET1 gate configuration for i.MX6UL according to the reference manual - Add ENET refclock mux support for i.MX6UL - Add support for USB host/device configuration on Renesas RZ/N1 - Add PLL2 programming support, and CAN-FD clocks on Renesas R-Car V4H - Add D1 CAN bus gates and resets for Allwinner - Mark D1 CPUX clock as critical on Allwinner - Reuse D1 driver for Allwinner R528/T113 - Cleanup sunxi-ng Kconfig - Fix sunxi-ng kernel-doc issues - Model Allwinner H3/H5 DRAM clock as fixed clock - Use .determine_rate() instead of .round_rate() for the dualdiv, mpll, sclk-div and cpu-dyn-div amlogic clock drivers - DDR clocks were marked as critical in the proper clock driver for each AT91 SoC such that drivers/memory/atmel-sdramc.c to be deleted in the next releases as it only does clock enablement - Patch to avoid compiling dt-compat.o for all AT91 SoCs as only some of them may use it - Support synchronous power_off requests in the qcom GDSC driver for proper GPU power collapse - Drop test clocks from various Qualcomm clk drivers - Update parent references to use clk_parent_data/clk_hw in various Qualcomm clk drivers - Fixes for the Qualcomm MSM8996 CPU clock controller - Transition Qualcomm MSM8974 GCC off the externally defined sleep_clk - Add GDSCs in the global clock controller for Qualcomm QCS404 - The SDCC core clocks on Qualcomm SM6115 are moved to floor_ops - Programming of clk_dis_wait for GPU CX GDSC on Qualcomm SC7180 and SDM845 are moved to use the recently introduced properties in the GDSC struct - Qualcomm's RPMh clock driver gains SM8550 and SA8775P clocks, and the IPA clock is added on a variety of platforms - De-duplicate identical clks in Qualcomm SMD RPM clk driver - Add a few missing clocks across msm8998, msm8992, msm8916, qcs404 to Qualcomm SDM RPM clk driver - Various Qualcomm clk drivers use devm_pm_runtime_enable() to simplify"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (228 commits) clk: qcom: apcs-msm8986: Include bitfield.h for FIELD_PREP clk: qcom: Revert sync_state based clk_disable_unused clk: imx: pll14xx: fix recalc_rate for negative kdiv clk: rs9: Drop unused pin_xin field MAINTAINERS: clk: imx: Add Peng Fan as reviewer clk: sprd: Add dependency for SPRD_UMS512_CLK clk: ralink: fix 'mt7621_gate_is_enabled()' function clk: mediatek: clk-mtk: Remove unneeded semicolon dt-bindings: clock: remove stih416 bindings dt-bindings: clock: add loongson-2 clock dt-bindings: clock: add loongson-2 clock include file clk: imx: fix compile testing imxrt1050 clk: Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled() clk: imx: set imx_clk_gpr_mux_ops storage-class-specifier to static clk: renesas: rcar-gen3: Disable R-Car H3 ES1.* dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml clk: qcom: gpucc-sdm845: fix clk_dis_wait being programmed for CX GDSC clk: qcom: gpucc-sc7180: fix clk_dis_wait being programmed for CX GDSC dt-bindings: clock: qcom,sa8775p-gcc: add the power-domains property clk: qcom: cpu-8996: add missing cputype include ...
show more ...
|
Revision tags: v6.1.14 |
|
#
b64baafa |
| 23-Feb-2023 |
Stephen Boyd <sboyd@kernel.org> |
Merge branches 'clk-loongson' and 'clk-qcom' into clk-next
* clk-loongson: dt-bindings: clock: add loongson-2 clock dt-bindings: clock: add loongson-2 clock include file
* clk-qcom: (143 commit
Merge branches 'clk-loongson' and 'clk-qcom' into clk-next
* clk-loongson: dt-bindings: clock: add loongson-2 clock dt-bindings: clock: add loongson-2 clock include file
* clk-qcom: (143 commits) clk: qcom: apcs-msm8986: Include bitfield.h for FIELD_PREP clk: qcom: Revert sync_state based clk_disable_unused dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml clk: qcom: gpucc-sdm845: fix clk_dis_wait being programmed for CX GDSC clk: qcom: gpucc-sc7180: fix clk_dis_wait being programmed for CX GDSC dt-bindings: clock: qcom,sa8775p-gcc: add the power-domains property clk: qcom: cpu-8996: add missing cputype include clk: qcom: gcc-sa8775p: remove unused variables clk: qcom: smd-rpm: provide RPM_SMD_XO_CLK_SRC on MSM8996 platform clk: qcom: add msm8996 Core Bus Framework (CBF) support dt-bindings: clock: qcom,msm8996-cbf: Describe the MSM8996 CBF clock controller clk: qcom: add the driver for the MSM8996 APCS clocks clk: qcom: gcc-qcs404: fix duplicate initializer warning clk: qcom: cpu-8996: change setup sequence to follow vendor kernel clk: qcom: cpu-8996: fix PLL clock ops clk: qcom: cpu-8996: fix ACD initialization clk: qcom: cpu-8996: fix PLL configuration sequence clk: qcom: cpu-8996: move qcom_cpu_clk_msm8996_acd_init call clk: qcom: cpu-8996: setup PLLs before registering clocks clk: qcom: cpu-8996: simplify the cpu_clk_notifier_cb ...
show more ...
|
#
5270c7a2 |
| 22-Feb-2023 |
Stephen Boyd <sboyd@kernel.org> |
Merge tag 'qcom-clk-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-qcom
Pull Qualcomm clk driver updates from Bjorn Andersson:
Support for requesting the next pow
Merge tag 'qcom-clk-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-qcom
Pull Qualcomm clk driver updates from Bjorn Andersson:
Support for requesting the next power_off operation for a genpd to be synchronous is introduced, and implemented in the GDSC driver. To allow the GPU driver to request power_off to wait for the GDSC to actually collapse.
Support for QDU1000/QRU1000 Global clock controller, SA8775P Global clock controller, SM8550 TCSR and display clock controller, SM6350 clock controller, nd MSM8996 CBF and APCS clock controllers is introduced.
Parent references are updated across a large number of clock drivers, to align with the design changes since those drivers where introduced. Similarly, test clocks has been dropped from a range of drivers.
A range of fixes for the MSM8996 CPU clock controller is introduced.
MSM8974 GCC is transitioned off the externally defined sleep_clk.
GDSC in the global clock controller for QCS404 is added, and various parent definitions are cleaned up.
The SDCC core clocks on SM6115 are moved for floor_ops.
Programming of clk_dis_wait for GPU CX GDSC on SC7180 and SDM845 are moved to use the recently introduced properties in the GDSC struct.
The RPMh clock driver gains SM8550 and SA8775P clocks, and the IPA clock is added on a variety of platforms.
The SMD RPM driver receives a big cleanup, in particular a move away from duplicating declaration of identical clocks between multiple platforms. A few missing clocks across msm8998, msm8992, msm8916, qcs404 are added as well.
Using devm_pm_runtime_enable() to clean up some duplication is done across SM8250 display and video clock controllers, SM8450 display clock controller and SC7280 LPASS clock controller.
Devicetree binding changes for above mentioned additions and changes are introduced.
Support for postponing clk_disable_unused() until sync_state was introduced, but later reverted again, awaiting an agreement on the solution.
Lastly, a change to pad a few registers in the SM8250 DTS to 8 digits was picked up in the wrong tree and kept here, to avoid rebasing.
* tag 'qcom-clk-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (142 commits) clk: qcom: Revert sync_state based clk_disable_unused dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml clk: qcom: gpucc-sdm845: fix clk_dis_wait being programmed for CX GDSC clk: qcom: gpucc-sc7180: fix clk_dis_wait being programmed for CX GDSC dt-bindings: clock: qcom,sa8775p-gcc: add the power-domains property clk: qcom: cpu-8996: add missing cputype include clk: qcom: gcc-sa8775p: remove unused variables clk: qcom: smd-rpm: provide RPM_SMD_XO_CLK_SRC on MSM8996 platform clk: qcom: add msm8996 Core Bus Framework (CBF) support dt-bindings: clock: qcom,msm8996-cbf: Describe the MSM8996 CBF clock controller clk: qcom: add the driver for the MSM8996 APCS clocks clk: qcom: gcc-qcs404: fix duplicate initializer warning clk: qcom: cpu-8996: change setup sequence to follow vendor kernel clk: qcom: cpu-8996: fix PLL clock ops clk: qcom: cpu-8996: fix ACD initialization clk: qcom: cpu-8996: fix PLL configuration sequence clk: qcom: cpu-8996: move qcom_cpu_clk_msm8996_acd_init call clk: qcom: cpu-8996: setup PLLs before registering clocks clk: qcom: cpu-8996: simplify the cpu_clk_notifier_cb clk: qcom: cpu-8996: skip ACD init if the setup is valid ...
show more ...
|
Revision tags: v6.1.13 |
|
#
7ae9fb1b |
| 21-Feb-2023 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge branch 'next' into for-linus
Prepare input updates for 6.3 merge window.
|
Revision tags: v6.2, v6.1.12, v6.1.11 |
|
#
7935b534 |
| 06-Feb-2023 |
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> |
dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml
The GPU clock controller bindings for the Qualcomm sm8350 platform are not correct. The driver uses .fw_name instead of using indices
dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml
The GPU clock controller bindings for the Qualcomm sm8350 platform are not correct. The driver uses .fw_name instead of using indices to bind parent clocks, thus demanding the clock-names usage. With the proper clock-names in place, the bindings becomes equal to the bindings defined by qcom,gpucc.yaml, so it is impractical to keep them in a separate file.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230206145707.122937-2-dmitry.baryshkov@linaro.org
show more ...
|
Revision tags: v6.1.10, v6.1.9, v6.1.8 |
|
#
6f849817 |
| 19-Jan-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
Merge drm/drm-next into drm-misc-next
Backmerging into drm-misc-next to get DRM accelerator infrastructure, which is required by ipuv driver.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
Revision tags: v6.1.7 |
|
#
d0e99511 |
| 17-Jan-2023 |
Kalle Valo <kvalo@kernel.org> |
Merge wireless into wireless-next
Due to the two cherry picked commits from wireless to wireless-next we have several conflicts in mt76. To avoid any bugs with conflicts merge wireless into wireless
Merge wireless into wireless-next
Due to the two cherry picked commits from wireless to wireless-next we have several conflicts in mt76. To avoid any bugs with conflicts merge wireless into wireless-next.
96f134dc1964 wifi: mt76: handle possible mt76_rx_token_consume failures fe13dad8992b wifi: mt76: dma: do not increment queue head if mt76_dma_add_buf fails
show more ...
|
Revision tags: v6.1.6, v6.1.5, v6.0.19 |
|
#
407da561 |
| 09-Jan-2023 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge tag 'v6.2-rc3' into next
Merge with mainline to bring in timer_shutdown_sync() API.
|
Revision tags: v6.0.18, v6.1.4, v6.1.3, v6.0.17 |
|
#
2c55d703 |
| 03-Jan-2023 |
Maxime Ripard <maxime@cerno.tech> |
Merge drm/drm-fixes into drm-misc-fixes
Let's start the fixes cycle.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
#
0d8eae7b |
| 02-Jan-2023 |
Jani Nikula <jani.nikula@intel.com> |
Merge drm/drm-next into drm-intel-next
Sync up with v6.2-rc1.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
Revision tags: v6.1.2, v6.0.16 |
|
#
b501d4dc |
| 30-Dec-2022 |
Rodrigo Vivi <rodrigo.vivi@intel.com> |
Merge drm/drm-next into drm-intel-gt-next
Sync after v6.2-rc1 landed in drm-next.
We need to get some dependencies in place before we can merge the fixes series from Gwan-gyeong and Chris.
Referen
Merge drm/drm-next into drm-intel-gt-next
Sync after v6.2-rc1 landed in drm-next.
We need to get some dependencies in place before we can merge the fixes series from Gwan-gyeong and Chris.
References: https://lore.kernel.org/all/Y6x5JCDnh2rvh4lA@intel.com/ Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
show more ...
|
#
6599e683 |
| 28-Dec-2022 |
Mauro Carvalho Chehab <mchehab@kernel.org> |
Merge tag 'v6.2-rc1' into media_tree
Linux 6.2-rc1
* tag 'v6.2-rc1': (14398 commits) Linux 6.2-rc1 treewide: Convert del_timer*() to timer_shutdown*() pstore: Properly assign mem_type propert
Merge tag 'v6.2-rc1' into media_tree
Linux 6.2-rc1
* tag 'v6.2-rc1': (14398 commits) Linux 6.2-rc1 treewide: Convert del_timer*() to timer_shutdown*() pstore: Properly assign mem_type property pstore: Make sure CONFIG_PSTORE_PMSG selects CONFIG_RT_MUTEXES cfi: Fix CFI failure with KASAN perf python: Fix splitting CC into compiler and options afs: Stop implementing ->writepage() afs: remove afs_cache_netfs and afs_zap_permits() declarations afs: remove variable nr_servers afs: Fix lost servers_outstanding count ALSA: usb-audio: Add new quirk FIXED_RATE for JBL Quantum810 Wireless ALSA: azt3328: Remove the unused function snd_azf3328_codec_outl() gcov: add support for checksum field test_maple_tree: add test for mas_spanning_rebalance() on insufficient data maple_tree: fix mas_spanning_rebalance() on insufficient data hugetlb: really allocate vma lock for all sharable vmas kmsan: export kmsan_handle_urb kmsan: include linux/vmalloc.h mm/mempolicy: fix memory leak in set_mempolicy_home_node system call mm, mremap: fix mremap() expanding vma with addr inside vma ...
show more ...
|
Revision tags: v6.1.1, v6.0.15, v6.0.14 |
|
#
1a931707 |
| 16-Dec-2022 |
Arnaldo Carvalho de Melo <acme@redhat.com> |
Merge remote-tracking branch 'torvalds/master' into perf/core
To resolve a trivial merge conflict with c302378bc157f6a7 ("libbpf: Hashmap interface update to allow both long and void* keys/values"),
Merge remote-tracking branch 'torvalds/master' into perf/core
To resolve a trivial merge conflict with c302378bc157f6a7 ("libbpf: Hashmap interface update to allow both long and void* keys/values"), where a function present upstream was removed in the perf tools development tree.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
show more ...
|