Merge 5.8-rc7 into char-misc-next

This should resolve the merge/build issues reported when trying to
create linux-next.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroa

Merge 5.8-rc7 into char-misc-next

This should resolve the merge/build issues reported when trying to
create linux-next.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge 5.8-rc7 into usb-next

We want the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'char-misc-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc into master

Pull char/misc driver fixes from Greg KH:
"Here are a few small driver fixes for 5.8-rc7

Merge tag 'char-misc-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc into master

Pull char/misc driver fixes from Greg KH:
"Here are a few small driver fixes for 5.8-rc7

They include:

- habanalabs fixes

- tiny fpga driver fixes

- /dev/mem fixup from previous changes

- interconnect driver fixes

- binder fix

All of these have been in linux-next for a while with no reported
issues"

* tag 'char-misc-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
interconnect: msm8916: Fix buswidth of pcnoc_s nodes
interconnect: Do not skip aggregation for disabled paths
/dev/mem: Add missing memory barriers for devmem_inode
binder: Don't use mmput() from shrinker function.
habanalabs: prevent possible out-of-bounds array access
fpga: dfl: fix bug in port reset handshake
fpga: dfl: pci: reduce the scope of variable 'ret'
habanalabs: set 4s timeout for message to device CPU
habanalabs: set clock gating per engine
habanalabs: block WREG_BULK packet on PDMA

show more ...

Merge branch 'elan-i2c' into next

Bring in update to Elan touchpad driver to support newer touchpads with
higher resolution.

Merge tag 'misc-habanalabs-fixes-2020-07-10' of git://people.freedesktop.org/~gabbayo/linux into char-misc-linus

This tag contains the following fixes for 5.8-rc4/5:

- Prevent user from using comma

Merge tag 'misc-habanalabs-fixes-2020-07-10' of git://people.freedesktop.org/~gabbayo/linux into char-misc-linus

This tag contains the following fixes for 5.8-rc4/5:

- Prevent user from using command WREG_BULK in PCI DMA channel. The command
won't be parsed correctly by the driver and will cause unknown behavior.
As the user doesn't need to use that command in that channel, its better
to just prevent it completely.

- Change the interface of the clock gating debugfs property from true/false
to bitmask with bit per engine. This will allow the user to debug the
ASIC while disabling the clock gating feature with fine-grain
granularity.

- Increase message-to-ASIC-CPU timeout to 4s (from 100ms/1s). The ASIC CPU
might respond sometimes after a large delay due to slow external
interfaces (such as temperature sensors) and that will result in a driver
timeout which will lead to ASIC reset.

* tag 'misc-habanalabs-fixes-2020-07-10' of git://people.freedesktop.org/~gabbayo/linux:
habanalabs: set 4s timeout for message to device CPU
habanalabs: set clock gating per engine
habanalabs: block WREG_BULK packet on PDMA

show more ...

habanalabs: set clock gating per engine

For debugging purposes, we need to allow the root user better control of
the clock gating feature of the DMA and compute engines. Therefore, change
the clock

habanalabs: set clock gating per engine

For debugging purposes, we need to allow the root user better control of
the clock gating feature of the DMA and compute engines. Therefore, change
the clock gating debugfs interface to be bitmask instead of true/false.
Each bit represents a different engine, according to gaudi_engine_id enum.

See debugfs documentation for more details.

Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>

show more ...

Merge tag 'irqchip-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip fixes from Marc Zyngier:

- Fix atomicity of affinity update in the G

Merge tag 'irqchip-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip fixes from Marc Zyngier:

- Fix atomicity of affinity update in the GIC driver
- Don't sleep in atomic when waiting for a GICv4.1 RD to respond
- Fix a couple of typos in user-visible messages

show more ...

Merge tag 'v5.8-rc3' into arm/qcom

Linux 5.8-rc3

Backmerge remote-tracking branch 'drm/drm-next' into drm-misc-next

Some conflicts with ttm_bo->offset removal, but drm-misc-next needs updating to v5.8.

Signed-off-by: Maarten Lankhorst <maarten.la

Backmerge remote-tracking branch 'drm/drm-next' into drm-misc-next

Some conflicts with ttm_bo->offset removal, but drm-misc-next needs updating to v5.8.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge drm/drm-next into drm-intel-next-queued

Catch up with upstream, in particular to get c1e8d7c6a7a6 ("mmap locking
API: convert mmap_sem comments").

Signed-off-by: Jani Nikula <jani.nikula@inte

Merge drm/drm-next into drm-intel-next-queued

Catch up with upstream, in particular to get c1e8d7c6a7a6 ("mmap locking
API: convert mmap_sem comments").

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

show more ...

Merge tag 'v5.8-rc1' into regulator-5.8

Linux 5.8-rc1

Merge tag 'v5.8-rc1' into fixes

Linux 5.8-rc1

Merge v5.8-rc1 into drm-misc-fixes

Beginning a new release cycles for what will become v5.8. Updating
drm-misc-fixes accordingly.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'dt/schema-cleanups' into dt/linus

Merge branch 'x86/entry' into ras/core

to fixup conflicts in arch/x86/kernel/cpu/mce/core.c so MCE specific follow
up patches can be applied without creating a horrible merge conflict
afterwards.

Merge tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc driver patches for 5.

Merge tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc driver patches for 5.8-rc1

Included in here are:

- habanalabs driver updates, loads

- mhi bus driver updates

- extcon driver updates

- clk driver updates (approved by the clock maintainer)

- firmware driver updates

- fpga driver updates

- gnss driver updates

- coresight driver updates

- interconnect driver updates

- parport driver updates (it's still alive!)

- nvmem driver updates

- soundwire driver updates

- visorbus driver updates

- w1 driver updates

- various misc driver updates

In short, loads of different driver subsystem updates along with the
drivers as well.

All have been in linux-next for a while with no reported issues"

* tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits)
habanalabs: correctly cast u64 to void*
habanalabs: initialize variable to default value
extcon: arizona: Fix runtime PM imbalance on error
extcon: max14577: Add proper dt-compatible strings
extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()'
extcon: remove redundant assignment to variable idx
w1: omap-hdq: print dev_err if irq flags are not cleared
w1: omap-hdq: fix interrupt handling which did show spurious timeouts
w1: omap-hdq: fix return value to be -1 if there is a timeout
w1: omap-hdq: cleanup to add missing newline for some dev_dbg
/dev/mem: Revoke mappings when a driver claims the region
misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages()
misc: xilinx-sdfec: cleanup return value in xsdfec_table_write()
misc: xilinx-sdfec: improve get_user_pages_fast() error handling
nvmem: qfprom: remove incorrect write support
habanalabs: handle MMU cache invalidation timeout
habanalabs: don't allow hard reset with open processes
habanalabs: GAUDI does not support soft-reset
habanalabs: add print for soft reset due to event
habanalabs: improve MMU cache invalidation code
...

show more ...

Merge branches 'for-5.7/upstream-fixes', 'for-5.8/apple', 'for-5.8/asus', 'for-5.8/core', 'for-5.8/intel-ish', 'for-5.8/logitech', 'for-5.8/mcp2221' and 'for-5.8/multitouch' into for-linus

Merge branch 'for-5.8' into for-linus

Merge branch 'timers/drivers/timer-ti' into timers/drivers/next

Merge tag 'misc-habanalabs-next-2020-05-19' of git://people.freedesktop.org/~gabbayo/linux into char-misc-next

Oded writes:

This tag contains the following changes for kernel 5.8:

- GAUDI ASIC sup

Merge tag 'misc-habanalabs-next-2020-05-19' of git://people.freedesktop.org/~gabbayo/linux into char-misc-next

Oded writes:

This tag contains the following changes for kernel 5.8:

- GAUDI ASIC support. The tag contains code and header files needed to
initialize the GAUDI ASIC and run workloads on it. There are changes to
the common code that are needed for GAUDI and there is the addition of
new ASIC-dependent code of GAUDI.

- Add new feature of signal/wait command submissions. This is relevant to
GAUDI only and allows the user to sync between streams (queues) inside
the device.

- Allow user to retrieve the device time alongside the host time, to allow
a user application to synchronize device time together with host
time during profiling.

- Change ASIC's CPU initialization by loading its boot loader code from the
Host memory (instead of it being programmed on the on-board FLASH).

- Expose more attributes through HWMON.

- Move the ASIC event handling code to be "common code". This will be
shared between GAUDI and future ASICs. Goya will still use its own code.

- Fix bug in command submission parsing in Goya.

- Small fixes to security configuration (open up some registers for user
access).

- Improvements to ASIC reset code.

* tag 'misc-habanalabs-next-2020-05-19' of git://people.freedesktop.org/~gabbayo/linux: (38 commits)
habanalabs: update patched_cb_size for Wreg32
habanalabs: move event handling to common firmware file
habanalabs: enable gaudi code in driver
habanalabs: add gaudi profiler module
habanalabs: add gaudi security module
habanalabs: add hwmgr module for gaudi
habanalabs: add gaudi asic-dependent code
uapi: habanalabs: add gaudi defines
habanalabs: add gaudi asic registers header files
habanalabs: get card type, location from F/W
habanalabs: support clock gating enable/disable
habanalabs: set PM profile to auto only for goya
habanalabs: add dedicated define for hard reset
habanalabs: check if CoreSight is supported
habanalabs: add signal/wait to CS IOCTL operations
habanalabs: handle the h/w sync object
habanalabs: define ASIC-dependent interface for signal/wait
uapi: habanalabs: add signal/wait operations
habanalabs: add missing MODULE_DEVICE_TABLE
habanalabs: print all CB handles as hex numbers
...

show more ...

habanalabs: support clock gating enable/disable

In Gaudi there is a feature of clock gating certain engines.
Therefore, add this property to the device structure.

In addition, due to a limitation o

habanalabs: support clock gating enable/disable

In Gaudi there is a feature of clock gating certain engines.
Therefore, add this property to the device structure.

In addition, due to a limitation of this feature, the driver needs to
dynamically enable or disable this feature during run-time. Therefore, add
ASIC interface functions to enable/disable this function from the common
code.

Moreover, this feature must be turned off when the user wishes to debug the
ASIC by reading/writing registers and/or memory through the driver's
debugfs. Therefore, add an option to enable/disable clock gating via the
debugfs interface.

Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

show more ...

habanalabs: remove stop-on-error flag from DMA

Stop-on-error mode in DMA is useful as it stops the transaction
immediately upon error e.g. page fault.
But it may cause the next command submission to

habanalabs: remove stop-on-error flag from DMA

Stop-on-error mode in DMA is useful as it stops the transaction
immediately upon error e.g. page fault.
But it may cause the next command submission to fail as is leaves the DMA
in unstable state.
Therefore we remove the stop-on-error configuration from the DMA.
Stop-on-err is still available for debug.

Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

show more ...

Merge branch 'kvm-amd-fixes' into HEAD

Merge branch 'for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu

Pull RCU updates from Paul McKenney:

1. Miscellaneous fixes.
2. kfree_rcu() updates.

Merge branch 'for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu

Pull RCU updates from Paul McKenney:

1. Miscellaneous fixes.
2. kfree_rcu() updates.
3. Remove scheduler locking restriction
4. RCU-tasks update, including addition of RCU Tasks Trace for
BPF use and RCU Tasks Rude. (This branch is on top of #3 due
to overlap of changed code.)
5. RCU CPU stall warning updates.
6. Torture-test updates.

show more ...

Merge tag 'efi-next' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/core

Pull EFI changes for v5.8 from Ard Biesheuvel:

"- preliminary changes for RISC-V
- add support for setti

Merge tag 'efi-next' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/core

Pull EFI changes for v5.8 from Ard Biesheuvel:

"- preliminary changes for RISC-V
- add support for setting the resolution on the EFI framebuffer
- simplify kernel image loading for arm64
- Move .bss into .data via the linker script instead of relying on symbol
annotations.
- Get rid of __pure getters to access global variables
- Clean up the config table matching arrays"

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...