README.fsl-ddr (6f5e1dc531d6b4a975e39054fdf7c737cbb4d8e9) README.fsl-ddr (c46bf09e0b567dda477da53163fe646e66c4912e)
1
2Table of interleaving modes supported in cpu/8xxx/ddr/
3======================================================
4 +-------------+---------------------------------------------------------+
5 | | Rank Interleaving |
6 | +--------+-----------+-----------+------------+-----------+
7 |Memory | | | | 2x2 | 4x1 |
8 |Controller | None | 2x1 lower | 2x1 upper | {CS0+CS1}, | {CS0+CS1+ |

--- 236 unchanged lines hidden (view full) ---

245with current setting without further calculation.
246
247The detail syntax for each commands are
248
249print [c<n>] [d<n>] [spd] [dimmparms] [commonparms] [opts] [addresses] [regs]
250 c<n> - the controller number, eg. c0, c1
251 d<n> - the DIMM number, eg. d0, d1
252 spd - print SPD data
1
2Table of interleaving modes supported in cpu/8xxx/ddr/
3======================================================
4 +-------------+---------------------------------------------------------+
5 | | Rank Interleaving |
6 | +--------+-----------+-----------+------------+-----------+
7 |Memory | | | | 2x2 | 4x1 |
8 |Controller | None | 2x1 lower | 2x1 upper | {CS0+CS1}, | {CS0+CS1+ |

--- 236 unchanged lines hidden (view full) ---

245with current setting without further calculation.
246
247The detail syntax for each commands are
248
249print [c<n>] [d<n>] [spd] [dimmparms] [commonparms] [opts] [addresses] [regs]
250 c<n> - the controller number, eg. c0, c1
251 d<n> - the DIMM number, eg. d0, d1
252 spd - print SPD data
253 dimmparms - DIMM paramaters, calcualted from SPD
253 dimmparms - DIMM parameters, calculated from SPD
254 commonparms - lowest common parameters for all DIMMs
255 opts - options
256 addresses - address assignment (not implemented yet)
257 regs - controller registers
258
259edit <c#> <d#> <spd|dimmparms|commonparms|opts|addresses|regs> <element> <value>
260 c<n> - the controller number, eg. c0, c1
261 d<n> - the DIMM number, eg. d0, d1
262 spd - print SPD data
254 commonparms - lowest common parameters for all DIMMs
255 opts - options
256 addresses - address assignment (not implemented yet)
257 regs - controller registers
258
259edit <c#> <d#> <spd|dimmparms|commonparms|opts|addresses|regs> <element> <value>
260 c<n> - the controller number, eg. c0, c1
261 d<n> - the DIMM number, eg. d0, d1
262 spd - print SPD data
263 dimmparms - DIMM paramaters, calcualted from SPD
263 dimmparms - DIMM parameters, calculated from SPD
264 commonparms - lowest common parameters for all DIMMs
265 opts - options
266 addresses - address assignment (not implemented yet)
267 regs - controller registers
268 <element> - name of the modified element
269 byte number if the object is SPD
270 <value> - decimal or heximal (prefixed with 0x) numbers
271

--- 103 unchanged lines hidden --- 		264 commonparms - lowest common parameters for all DIMMs
265 opts - options
266 addresses - address assignment (not implemented yet)
267 regs - controller registers
268 <element> - name of the modified element
269 byte number if the object is SPD
270 <value> - decimal or heximal (prefixed with 0x) numbers
271

--- 103 unchanged lines hidden ---