| README.at91 (5f58f8d20f97deaf4dde7eb3886efa3e5a3715ee) | README.at91 (1b3b7c640d04df2ba9a9d947117d112a75fee7f4) |
|---|---|
| 1Atmel AT91 Evaluation kits 2 3http://atmel.com/dyn/products/tools.asp?family_id=605#1443 4 5I. Board mapping & boot media 6------------------------------------------------------------------------------ 7AT91SAM9260EK, AT91SAM9G20EK & AT91SAM9XEEK 8------------------------------------------------------------------------------ --- 48 unchanged lines hidden (view full) --- 57 0x20000000 - 23FFFFFF SDRAM (64 MB) 58 0xC0000000 - Cxxxxxxx Atmel Dataflash card (J9) 59 60Environment variables 61 62 U-Boot environment variables can be stored at different places: 63 - Dataflash on SPI chip select 0 (dataflash card) 64 - Nand flash. | 1Atmel AT91 Evaluation kits 2 3http://atmel.com/dyn/products/tools.asp?family_id=605#1443 4 5I. Board mapping & boot media 6------------------------------------------------------------------------------ 7AT91SAM9260EK, AT91SAM9G20EK & AT91SAM9XEEK 8------------------------------------------------------------------------------ --- 48 unchanged lines hidden (view full) --- 57 0x20000000 - 23FFFFFF SDRAM (64 MB) 58 0xC0000000 - Cxxxxxxx Atmel Dataflash card (J9) 59 60Environment variables 61 62 U-Boot environment variables can be stored at different places: 63 - Dataflash on SPI chip select 0 (dataflash card) 64 - Nand flash. |
| 65 - Nor falsh (not populate by default) |
|
| 65 66 You can choose your storage location at config step (here for at91sam9260ek) : 67 make at91sam9263ek_config - use data flash (spi cs0) (default) 68 make at91sam9263ek_nandflash_config - use nand flash 69 make at91sam9263ek_dataflash_cs0_config - use data flash (spi cs0) | 66 67 You can choose your storage location at config step (here for at91sam9260ek) : 68 make at91sam9263ek_config - use data flash (spi cs0) (default) 69 make at91sam9263ek_nandflash_config - use nand flash 70 make at91sam9263ek_dataflash_cs0_config - use data flash (spi cs0) |
| 71 make at91sam9263ek_norflash_config - use nor falsh |
|
| 70 | 72 |
| 73 You can choose to boot directly from U-Boot at config step 74 make at91sam9263ek_norflash_boot_config - boot from nor falsh |
|
| 71 | 75 |
| 76 |
|
| 72------------------------------------------------------------------------------ 73AT91SAM9RLEK 74------------------------------------------------------------------------------ 75 76Memory map 77 0x20000000 - 23FFFFFF SDRAM (64 MB) 78 0xC0000000 - Cxxxxxxx Soldered Atmel Dataflash 79 --- 20 unchanged lines hidden --- | 77------------------------------------------------------------------------------ 78AT91SAM9RLEK 79------------------------------------------------------------------------------ 80 81Memory map 82 0x20000000 - 23FFFFFF SDRAM (64 MB) 83 0xC0000000 - Cxxxxxxx Soldered Atmel Dataflash 84 --- 20 unchanged lines hidden --- |