pinctrl-sx150x.c (ec61168bc0bc03a6e7da3802ac41a113ed6c8160) pinctrl-sx150x.c (1663682cf090b94bd8531a0b9be812e10477143f)
1/*
2 * Copyright (c) 2016, BayLibre, SAS. All rights reserved.
3 * Author: Neil Armstrong <narmstrong@baylibre.com>
4 *
5 * Copyright (c) 2010, Code Aurora Forum. All rights reserved.
6 *
7 * Driver for Semtech SX150X I2C GPIO Expanders
8 *

--- 142 unchanged lines hidden (view full) ---

151static const struct sx150x_device_data sx1508q_device_data = {
152 .model = SX150X_789,
153 .reg_pullup = 0x03,
154 .reg_pulldn = 0x04,
155 .reg_dir = 0x07,
156 .reg_data = 0x08,
157 .reg_irq_mask = 0x09,
158 .reg_irq_src = 0x0c,
1/*
2 * Copyright (c) 2016, BayLibre, SAS. All rights reserved.
3 * Author: Neil Armstrong <narmstrong@baylibre.com>
4 *
5 * Copyright (c) 2010, Code Aurora Forum. All rights reserved.
6 *
7 * Driver for Semtech SX150X I2C GPIO Expanders
8 *

--- 142 unchanged lines hidden (view full) ---

151static const struct sx150x_device_data sx1508q_device_data = {
152 .model = SX150X_789,
153 .reg_pullup = 0x03,
154 .reg_pulldn = 0x04,
155 .reg_dir = 0x07,
156 .reg_data = 0x08,
157 .reg_irq_mask = 0x09,
158 .reg_irq_src = 0x0c,
159 .reg_sense = 0x0b,
159 .reg_sense = 0x0a,
160 .pri.x789 = {
161 .reg_drain = 0x05,
162 .reg_polarity = 0x06,
163 .reg_clock = 0x0f,
164 .reg_misc = 0x10,
165 .reg_reset = 0x7d,
166 },
167 .ngpios = 8,

--- 48 unchanged lines hidden (view full) ---

216static const struct sx150x_device_data sx1502q_device_data = {
217 .model = SX150X_123,
218 .reg_pullup = 0x02,
219 .reg_pulldn = 0x03,
220 .reg_dir = 0x01,
221 .reg_data = 0x00,
222 .reg_irq_mask = 0x05,
223 .reg_irq_src = 0x08,
160 .pri.x789 = {
161 .reg_drain = 0x05,
162 .reg_polarity = 0x06,
163 .reg_clock = 0x0f,
164 .reg_misc = 0x10,
165 .reg_reset = 0x7d,
166 },
167 .ngpios = 8,

--- 48 unchanged lines hidden (view full) ---

216static const struct sx150x_device_data sx1502q_device_data = {
217 .model = SX150X_123,
218 .reg_pullup = 0x02,
219 .reg_pulldn = 0x03,
220 .reg_dir = 0x01,
221 .reg_data = 0x00,
222 .reg_irq_mask = 0x05,
223 .reg_irq_src = 0x08,
224 .reg_sense = 0x07,
224 .reg_sense = 0x06,
225 .pri.x123 = {
226 .reg_pld_mode = 0x10,
227 .reg_pld_table0 = 0x11,
228 .reg_pld_table1 = 0x12,
229 .reg_pld_table2 = 0x13,
230 .reg_pld_table3 = 0x14,
231 .reg_pld_table4 = 0x15,
232 .reg_advance = 0xad,

--- 939 unchanged lines hidden --- 		225 .pri.x123 = {
226 .reg_pld_mode = 0x10,
227 .reg_pld_table0 = 0x11,
228 .reg_pld_table1 = 0x12,
229 .reg_pld_table2 = 0x13,
230 .reg_pld_table3 = 0x14,
231 .reg_pld_table4 = 0x15,
232 .reg_advance = 0xad,

--- 939 unchanged lines hidden ---