1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Copyright 2017 NXP 4 * Copyright (C) 2017-2018 Pengutronix, Lucas Stach <kernel@pengutronix.de> 5 */ 6 7#include <dt-bindings/clock/imx8mq-clock.h> 8#include <dt-bindings/power/imx8mq-power.h> 9#include <dt-bindings/reset/imx8mq-reset.h> 10#include <dt-bindings/gpio/gpio.h> 11#include "dt-bindings/input/input.h" 12#include <dt-bindings/interrupt-controller/arm-gic.h> 13#include <dt-bindings/thermal/thermal.h> 14#include <dt-bindings/interconnect/imx8mq.h> 15#include "imx8mq-pinfunc.h" 16 17/ { 18 interrupt-parent = <&gpc>; 19 20 #address-cells = <2>; 21 #size-cells = <2>; 22 23 aliases { 24 ethernet0 = &fec1; 25 gpio0 = &gpio1; 26 gpio1 = &gpio2; 27 gpio2 = &gpio3; 28 gpio3 = &gpio4; 29 gpio4 = &gpio5; 30 i2c0 = &i2c1; 31 i2c1 = &i2c2; 32 i2c2 = &i2c3; 33 i2c3 = &i2c4; 34 mmc0 = &usdhc1; 35 mmc1 = &usdhc2; 36 serial0 = &uart1; 37 serial1 = &uart2; 38 serial2 = &uart3; 39 serial3 = &uart4; 40 spi0 = &ecspi1; 41 spi1 = &ecspi2; 42 spi2 = &ecspi3; 43 }; 44 45 ckil: clock-ckil { 46 compatible = "fixed-clock"; 47 #clock-cells = <0>; 48 clock-frequency = <32768>; 49 clock-output-names = "ckil"; 50 }; 51 52 osc_25m: clock-osc-25m { 53 compatible = "fixed-clock"; 54 #clock-cells = <0>; 55 clock-frequency = <25000000>; 56 clock-output-names = "osc_25m"; 57 }; 58 59 osc_27m: clock-osc-27m { 60 compatible = "fixed-clock"; 61 #clock-cells = <0>; 62 clock-frequency = <27000000>; 63 clock-output-names = "osc_27m"; 64 }; 65 66 hdmi_phy_27m: clock-hdmi-phy-27m { 67 compatible = "fixed-clock"; 68 #clock-cells = <0>; 69 clock-frequency = <27000000>; 70 clock-output-names = "hdmi_phy_27m"; 71 }; 72 73 clk_ext1: clock-ext1 { 74 compatible = "fixed-clock"; 75 #clock-cells = <0>; 76 clock-frequency = <133000000>; 77 clock-output-names = "clk_ext1"; 78 }; 79 80 clk_ext2: clock-ext2 { 81 compatible = "fixed-clock"; 82 #clock-cells = <0>; 83 clock-frequency = <133000000>; 84 clock-output-names = "clk_ext2"; 85 }; 86 87 clk_ext3: clock-ext3 { 88 compatible = "fixed-clock"; 89 #clock-cells = <0>; 90 clock-frequency = <133000000>; 91 clock-output-names = "clk_ext3"; 92 }; 93 94 clk_ext4: clock-ext4 { 95 compatible = "fixed-clock"; 96 #clock-cells = <0>; 97 clock-frequency = <133000000>; 98 clock-output-names = "clk_ext4"; 99 }; 100 101 cpus { 102 #address-cells = <1>; 103 #size-cells = <0>; 104 105 A53_0: cpu@0 { 106 device_type = "cpu"; 107 compatible = "arm,cortex-a53"; 108 reg = <0x0>; 109 clock-latency = <61036>; /* two CLK32 periods */ 110 clocks = <&clk IMX8MQ_CLK_ARM>; 111 enable-method = "psci"; 112 i-cache-size = <0x8000>; 113 i-cache-line-size = <64>; 114 i-cache-sets = <256>; 115 d-cache-size = <0x8000>; 116 d-cache-line-size = <64>; 117 d-cache-sets = <128>; 118 next-level-cache = <&A53_L2>; 119 operating-points-v2 = <&a53_opp_table>; 120 #cooling-cells = <2>; 121 nvmem-cells = <&cpu_speed_grade>; 122 nvmem-cell-names = "speed_grade"; 123 }; 124 125 A53_1: cpu@1 { 126 device_type = "cpu"; 127 compatible = "arm,cortex-a53"; 128 reg = <0x1>; 129 clock-latency = <61036>; /* two CLK32 periods */ 130 clocks = <&clk IMX8MQ_CLK_ARM>; 131 enable-method = "psci"; 132 i-cache-size = <0x8000>; 133 i-cache-line-size = <64>; 134 i-cache-sets = <256>; 135 d-cache-size = <0x8000>; 136 d-cache-line-size = <64>; 137 d-cache-sets = <128>; 138 next-level-cache = <&A53_L2>; 139 operating-points-v2 = <&a53_opp_table>; 140 #cooling-cells = <2>; 141 }; 142 143 A53_2: cpu@2 { 144 device_type = "cpu"; 145 compatible = "arm,cortex-a53"; 146 reg = <0x2>; 147 clock-latency = <61036>; /* two CLK32 periods */ 148 clocks = <&clk IMX8MQ_CLK_ARM>; 149 enable-method = "psci"; 150 i-cache-size = <0x8000>; 151 i-cache-line-size = <64>; 152 i-cache-sets = <256>; 153 d-cache-size = <0x8000>; 154 d-cache-line-size = <64>; 155 d-cache-sets = <128>; 156 next-level-cache = <&A53_L2>; 157 operating-points-v2 = <&a53_opp_table>; 158 #cooling-cells = <2>; 159 }; 160 161 A53_3: cpu@3 { 162 device_type = "cpu"; 163 compatible = "arm,cortex-a53"; 164 reg = <0x3>; 165 clock-latency = <61036>; /* two CLK32 periods */ 166 clocks = <&clk IMX8MQ_CLK_ARM>; 167 enable-method = "psci"; 168 i-cache-size = <0x8000>; 169 i-cache-line-size = <64>; 170 i-cache-sets = <256>; 171 d-cache-size = <0x8000>; 172 d-cache-line-size = <64>; 173 d-cache-sets = <128>; 174 next-level-cache = <&A53_L2>; 175 operating-points-v2 = <&a53_opp_table>; 176 #cooling-cells = <2>; 177 }; 178 179 A53_L2: l2-cache0 { 180 compatible = "cache"; 181 cache-level = <2>; 182 cache-unified; 183 cache-size = <0x100000>; 184 cache-line-size = <64>; 185 cache-sets = <1024>; 186 }; 187 }; 188 189 a53_opp_table: opp-table { 190 compatible = "operating-points-v2"; 191 opp-shared; 192 193 opp-800000000 { 194 opp-hz = /bits/ 64 <800000000>; 195 opp-microvolt = <900000>; 196 /* Industrial only */ 197 opp-supported-hw = <0xf>, <0x4>; 198 clock-latency-ns = <150000>; 199 opp-suspend; 200 }; 201 202 opp-1000000000 { 203 opp-hz = /bits/ 64 <1000000000>; 204 opp-microvolt = <900000>; 205 /* Consumer only */ 206 opp-supported-hw = <0xe>, <0x3>; 207 clock-latency-ns = <150000>; 208 opp-suspend; 209 }; 210 211 opp-1300000000 { 212 opp-hz = /bits/ 64 <1300000000>; 213 opp-microvolt = <1000000>; 214 opp-supported-hw = <0xc>, <0x4>; 215 clock-latency-ns = <150000>; 216 opp-suspend; 217 }; 218 219 opp-1500000000 { 220 opp-hz = /bits/ 64 <1500000000>; 221 opp-microvolt = <1000000>; 222 opp-supported-hw = <0x8>, <0x3>; 223 clock-latency-ns = <150000>; 224 opp-suspend; 225 }; 226 }; 227 228 pmu { 229 compatible = "arm,cortex-a53-pmu"; 230 interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; 231 interrupt-parent = <&gic>; 232 }; 233 234 psci { 235 compatible = "arm,psci-1.0"; 236 method = "smc"; 237 }; 238 239 thermal-zones { 240 cpu_thermal: cpu-thermal { 241 polling-delay-passive = <250>; 242 polling-delay = <2000>; 243 thermal-sensors = <&tmu 0>; 244 245 trips { 246 cpu_alert: cpu-alert { 247 temperature = <80000>; 248 hysteresis = <2000>; 249 type = "passive"; 250 }; 251 252 cpu-crit { 253 temperature = <90000>; 254 hysteresis = <2000>; 255 type = "critical"; 256 }; 257 }; 258 259 cooling-maps { 260 map0 { 261 trip = <&cpu_alert>; 262 cooling-device = 263 <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 264 <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 265 <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 266 <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 267 }; 268 }; 269 }; 270 271 gpu-thermal { 272 polling-delay-passive = <250>; 273 polling-delay = <2000>; 274 thermal-sensors = <&tmu 1>; 275 276 trips { 277 gpu_alert: gpu-alert { 278 temperature = <80000>; 279 hysteresis = <2000>; 280 type = "passive"; 281 }; 282 283 gpu-crit { 284 temperature = <90000>; 285 hysteresis = <2000>; 286 type = "critical"; 287 }; 288 }; 289 290 cooling-maps { 291 map0 { 292 trip = <&gpu_alert>; 293 cooling-device = 294 <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 295 }; 296 }; 297 }; 298 299 vpu-thermal { 300 polling-delay-passive = <250>; 301 polling-delay = <2000>; 302 thermal-sensors = <&tmu 2>; 303 304 trips { 305 vpu-crit { 306 temperature = <90000>; 307 hysteresis = <2000>; 308 type = "critical"; 309 }; 310 }; 311 }; 312 }; 313 314 timer { 315 compatible = "arm,armv8-timer"; 316 interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */ 317 <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */ 318 <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */ 319 <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */ 320 interrupt-parent = <&gic>; 321 arm,no-tick-in-suspend; 322 }; 323 324 soc: soc@0 { 325 compatible = "fsl,imx8mq-soc", "simple-bus"; 326 #address-cells = <1>; 327 #size-cells = <1>; 328 ranges = <0x0 0x0 0x0 0x3e000000>; 329 dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>; 330 nvmem-cells = <&imx8mq_uid>; 331 nvmem-cell-names = "soc_unique_id"; 332 333 etm0: etm@28440000 { 334 compatible = "arm,coresight-etm4x", "arm,primecell"; 335 reg = <0x28440000 0x1000>; 336 cpu = <&A53_0>; 337 clocks = <&clk IMX8MQ_CLK_MAIN_AXI>; 338 clock-names = "apb_pclk"; 339 340 out-ports { 341 port { 342 etm0_out_port: endpoint { 343 remote-endpoint = <&ca_funnel_in_port0>; 344 }; 345 }; 346 }; 347 }; 348 349 etm1: etm@28540000 { 350 compatible = "arm,coresight-etm4x", "arm,primecell"; 351 reg = <0x28540000 0x1000>; 352 cpu = <&A53_1>; 353 clocks = <&clk IMX8MQ_CLK_MAIN_AXI>; 354 clock-names = "apb_pclk"; 355 356 out-ports { 357 port { 358 etm1_out_port: endpoint { 359 remote-endpoint = <&ca_funnel_in_port1>; 360 }; 361 }; 362 }; 363 }; 364 365 etm2: etm@28640000 { 366 compatible = "arm,coresight-etm4x", "arm,primecell"; 367 reg = <0x28640000 0x1000>; 368 cpu = <&A53_2>; 369 clocks = <&clk IMX8MQ_CLK_MAIN_AXI>; 370 clock-names = "apb_pclk"; 371 372 out-ports { 373 port { 374 etm2_out_port: endpoint { 375 remote-endpoint = <&ca_funnel_in_port2>; 376 }; 377 }; 378 }; 379 }; 380 381 etm3: etm@28740000 { 382 compatible = "arm,coresight-etm4x", "arm,primecell"; 383 reg = <0x28740000 0x1000>; 384 cpu = <&A53_3>; 385 clocks = <&clk IMX8MQ_CLK_MAIN_AXI>; 386 clock-names = "apb_pclk"; 387 388 out-ports { 389 port { 390 etm3_out_port: endpoint { 391 remote-endpoint = <&ca_funnel_in_port3>; 392 }; 393 }; 394 }; 395 }; 396 397 funnel { 398 /* 399 * non-configurable funnel don't show up on the AMBA 400 * bus. As such no need to add "arm,primecell". 401 */ 402 compatible = "arm,coresight-static-funnel"; 403 404 in-ports { 405 #address-cells = <1>; 406 #size-cells = <0>; 407 408 port@0 { 409 reg = <0>; 410 411 ca_funnel_in_port0: endpoint { 412 remote-endpoint = <&etm0_out_port>; 413 }; 414 }; 415 416 port@1 { 417 reg = <1>; 418 419 ca_funnel_in_port1: endpoint { 420 remote-endpoint = <&etm1_out_port>; 421 }; 422 }; 423 424 port@2 { 425 reg = <2>; 426 427 ca_funnel_in_port2: endpoint { 428 remote-endpoint = <&etm2_out_port>; 429 }; 430 }; 431 432 port@3 { 433 reg = <3>; 434 435 ca_funnel_in_port3: endpoint { 436 remote-endpoint = <&etm3_out_port>; 437 }; 438 }; 439 }; 440 441 out-ports { 442 port { 443 ca_funnel_out_port0: endpoint { 444 remote-endpoint = <&hugo_funnel_in_port0>; 445 }; 446 }; 447 }; 448 }; 449 450 funnel@28c03000 { 451 compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; 452 reg = <0x28c03000 0x1000>; 453 clocks = <&clk IMX8MQ_CLK_MAIN_AXI>; 454 clock-names = "apb_pclk"; 455 456 in-ports { 457 #address-cells = <1>; 458 #size-cells = <0>; 459 460 port@0 { 461 reg = <0>; 462 463 hugo_funnel_in_port0: endpoint { 464 remote-endpoint = <&ca_funnel_out_port0>; 465 }; 466 }; 467 468 port@1 { 469 reg = <1>; 470 471 hugo_funnel_in_port1: endpoint { 472 /* M4 input */ 473 }; 474 }; 475 /* the other input ports are not connect to anything */ 476 }; 477 478 out-ports { 479 port { 480 hugo_funnel_out_port0: endpoint { 481 remote-endpoint = <&etf_in_port>; 482 }; 483 }; 484 }; 485 }; 486 487 etf@28c04000 { 488 compatible = "arm,coresight-tmc", "arm,primecell"; 489 reg = <0x28c04000 0x1000>; 490 clocks = <&clk IMX8MQ_CLK_MAIN_AXI>; 491 clock-names = "apb_pclk"; 492 493 in-ports { 494 port { 495 etf_in_port: endpoint { 496 remote-endpoint = <&hugo_funnel_out_port0>; 497 }; 498 }; 499 }; 500 501 out-ports { 502 port { 503 etf_out_port: endpoint { 504 remote-endpoint = <&etr_in_port>; 505 }; 506 }; 507 }; 508 }; 509 510 etr@28c06000 { 511 compatible = "arm,coresight-tmc", "arm,primecell"; 512 reg = <0x28c06000 0x1000>; 513 clocks = <&clk IMX8MQ_CLK_MAIN_AXI>; 514 clock-names = "apb_pclk"; 515 516 in-ports { 517 port { 518 etr_in_port: endpoint { 519 remote-endpoint = <&etf_out_port>; 520 }; 521 }; 522 }; 523 }; 524 525 aips1: bus@30000000 { /* AIPS1 */ 526 compatible = "fsl,aips-bus", "simple-bus"; 527 reg = <0x30000000 0x400000>; 528 #address-cells = <1>; 529 #size-cells = <1>; 530 ranges = <0x30000000 0x30000000 0x400000>; 531 532 sai1: sai@30010000 { 533 #sound-dai-cells = <0>; 534 compatible = "fsl,imx8mq-sai"; 535 reg = <0x30010000 0x10000>; 536 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; 537 clocks = <&clk IMX8MQ_CLK_SAI1_IPG>, 538 <&clk IMX8MQ_CLK_SAI1_ROOT>, 539 <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>; 540 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 541 dmas = <&sdma2 8 24 0>, <&sdma1 9 24 0>; 542 dma-names = "rx", "tx"; 543 status = "disabled"; 544 }; 545 546 sai6: sai@30030000 { 547 #sound-dai-cells = <0>; 548 compatible = "fsl,imx8mq-sai"; 549 reg = <0x30030000 0x10000>; 550 interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; 551 clocks = <&clk IMX8MQ_CLK_SAI6_IPG>, 552 <&clk IMX8MQ_CLK_SAI6_ROOT>, 553 <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>; 554 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 555 dmas = <&sdma2 4 24 0>, <&sdma2 5 24 0>; 556 dma-names = "rx", "tx"; 557 status = "disabled"; 558 }; 559 560 sai5: sai@30040000 { 561 #sound-dai-cells = <0>; 562 compatible = "fsl,imx8mq-sai"; 563 reg = <0x30040000 0x10000>; 564 interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; 565 clocks = <&clk IMX8MQ_CLK_SAI5_IPG>, 566 <&clk IMX8MQ_CLK_SAI5_ROOT>, 567 <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>; 568 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 569 dmas = <&sdma2 2 24 0>, <&sdma2 3 24 0>; 570 dma-names = "rx", "tx"; 571 status = "disabled"; 572 }; 573 574 sai4: sai@30050000 { 575 #sound-dai-cells = <0>; 576 compatible = "fsl,imx8mq-sai"; 577 reg = <0x30050000 0x10000>; 578 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; 579 clocks = <&clk IMX8MQ_CLK_SAI4_IPG>, 580 <&clk IMX8MQ_CLK_SAI4_ROOT>, 581 <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>; 582 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 583 dmas = <&sdma2 0 24 0>, <&sdma2 1 24 0>; 584 dma-names = "rx", "tx"; 585 status = "disabled"; 586 }; 587 588 gpio1: gpio@30200000 { 589 compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio"; 590 reg = <0x30200000 0x10000>; 591 interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, 592 <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; 593 clocks = <&clk IMX8MQ_CLK_GPIO1_ROOT>; 594 gpio-controller; 595 #gpio-cells = <2>; 596 interrupt-controller; 597 #interrupt-cells = <2>; 598 gpio-ranges = <&iomuxc 0 10 30>; 599 }; 600 601 gpio2: gpio@30210000 { 602 compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio"; 603 reg = <0x30210000 0x10000>; 604 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, 605 <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; 606 clocks = <&clk IMX8MQ_CLK_GPIO2_ROOT>; 607 gpio-controller; 608 #gpio-cells = <2>; 609 interrupt-controller; 610 #interrupt-cells = <2>; 611 gpio-ranges = <&iomuxc 0 40 21>; 612 }; 613 614 gpio3: gpio@30220000 { 615 compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio"; 616 reg = <0x30220000 0x10000>; 617 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, 618 <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; 619 clocks = <&clk IMX8MQ_CLK_GPIO3_ROOT>; 620 gpio-controller; 621 #gpio-cells = <2>; 622 interrupt-controller; 623 #interrupt-cells = <2>; 624 gpio-ranges = <&iomuxc 0 61 26>; 625 }; 626 627 gpio4: gpio@30230000 { 628 compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio"; 629 reg = <0x30230000 0x10000>; 630 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, 631 <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; 632 clocks = <&clk IMX8MQ_CLK_GPIO4_ROOT>; 633 gpio-controller; 634 #gpio-cells = <2>; 635 interrupt-controller; 636 #interrupt-cells = <2>; 637 gpio-ranges = <&iomuxc 0 87 32>; 638 }; 639 640 gpio5: gpio@30240000 { 641 compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio"; 642 reg = <0x30240000 0x10000>; 643 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, 644 <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; 645 clocks = <&clk IMX8MQ_CLK_GPIO5_ROOT>; 646 gpio-controller; 647 #gpio-cells = <2>; 648 interrupt-controller; 649 #interrupt-cells = <2>; 650 gpio-ranges = <&iomuxc 0 119 30>; 651 }; 652 653 tmu: tmu@30260000 { 654 compatible = "fsl,imx8mq-tmu"; 655 reg = <0x30260000 0x10000>; 656 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; 657 clocks = <&clk IMX8MQ_CLK_TMU_ROOT>; 658 little-endian; 659 fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>; 660 fsl,tmu-calibration = <0x00000000 0x00000023>, 661 <0x00000001 0x00000029>, 662 <0x00000002 0x0000002f>, 663 <0x00000003 0x00000035>, 664 <0x00000004 0x0000003d>, 665 <0x00000005 0x00000043>, 666 <0x00000006 0x0000004b>, 667 <0x00000007 0x00000051>, 668 <0x00000008 0x00000057>, 669 <0x00000009 0x0000005f>, 670 <0x0000000a 0x00000067>, 671 <0x0000000b 0x0000006f>, 672 673 <0x00010000 0x0000001b>, 674 <0x00010001 0x00000023>, 675 <0x00010002 0x0000002b>, 676 <0x00010003 0x00000033>, 677 <0x00010004 0x0000003b>, 678 <0x00010005 0x00000043>, 679 <0x00010006 0x0000004b>, 680 <0x00010007 0x00000055>, 681 <0x00010008 0x0000005d>, 682 <0x00010009 0x00000067>, 683 <0x0001000a 0x00000070>, 684 685 <0x00020000 0x00000017>, 686 <0x00020001 0x00000023>, 687 <0x00020002 0x0000002d>, 688 <0x00020003 0x00000037>, 689 <0x00020004 0x00000041>, 690 <0x00020005 0x0000004b>, 691 <0x00020006 0x00000057>, 692 <0x00020007 0x00000063>, 693 <0x00020008 0x0000006f>, 694 695 <0x00030000 0x00000015>, 696 <0x00030001 0x00000021>, 697 <0x00030002 0x0000002d>, 698 <0x00030003 0x00000039>, 699 <0x00030004 0x00000045>, 700 <0x00030005 0x00000053>, 701 <0x00030006 0x0000005f>, 702 <0x00030007 0x00000071>; 703 #thermal-sensor-cells = <1>; 704 }; 705 706 wdog1: watchdog@30280000 { 707 compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt"; 708 reg = <0x30280000 0x10000>; 709 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; 710 clocks = <&clk IMX8MQ_CLK_WDOG1_ROOT>; 711 status = "disabled"; 712 }; 713 714 wdog2: watchdog@30290000 { 715 compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt"; 716 reg = <0x30290000 0x10000>; 717 interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; 718 clocks = <&clk IMX8MQ_CLK_WDOG2_ROOT>; 719 status = "disabled"; 720 }; 721 722 wdog3: watchdog@302a0000 { 723 compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt"; 724 reg = <0x302a0000 0x10000>; 725 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; 726 clocks = <&clk IMX8MQ_CLK_WDOG3_ROOT>; 727 status = "disabled"; 728 }; 729 730 sdma2: dma-controller@302c0000 { 731 compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma"; 732 reg = <0x302c0000 0x10000>; 733 interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; 734 clocks = <&clk IMX8MQ_CLK_SDMA2_ROOT>, 735 <&clk IMX8MQ_CLK_SDMA2_ROOT>; 736 clock-names = "ipg", "ahb"; 737 #dma-cells = <3>; 738 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; 739 }; 740 741 lcdif: lcd-controller@30320000 { 742 compatible = "fsl,imx8mq-lcdif", "fsl,imx6sx-lcdif"; 743 reg = <0x30320000 0x10000>; 744 interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; 745 clocks = <&clk IMX8MQ_CLK_LCDIF_PIXEL>, 746 <&clk IMX8MQ_CLK_DISP_APB_ROOT>, 747 <&clk IMX8MQ_CLK_DISP_AXI_ROOT>; 748 clock-names = "pix", "axi", "disp_axi"; 749 assigned-clocks = <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>, 750 <&clk IMX8MQ_VIDEO_PLL1_BYPASS>, 751 <&clk IMX8MQ_CLK_LCDIF_PIXEL>, 752 <&clk IMX8MQ_VIDEO_PLL1>; 753 assigned-clock-parents = <&clk IMX8MQ_CLK_25M>, 754 <&clk IMX8MQ_VIDEO_PLL1>, 755 <&clk IMX8MQ_VIDEO_PLL1_OUT>; 756 assigned-clock-rates = <0>, <0>, <0>, <594000000>; 757 status = "disabled"; 758 759 port { 760 lcdif_mipi_dsi: endpoint { 761 remote-endpoint = <&mipi_dsi_lcdif_in>; 762 }; 763 }; 764 }; 765 766 iomuxc: pinctrl@30330000 { 767 compatible = "fsl,imx8mq-iomuxc"; 768 reg = <0x30330000 0x10000>; 769 }; 770 771 iomuxc_gpr: syscon@30340000 { 772 compatible = "fsl,imx8mq-iomuxc-gpr", "syscon", "simple-mfd"; 773 reg = <0x30340000 0x10000>; 774 775 mux: mux-controller { 776 compatible = "mmio-mux"; 777 #mux-control-cells = <1>; 778 mux-reg-masks = <0x34 0x00000004>; /* MIPI_MUX_SEL */ 779 }; 780 }; 781 782 ocotp: efuse@30350000 { 783 compatible = "fsl,imx8mq-ocotp", "syscon"; 784 reg = <0x30350000 0x10000>; 785 clocks = <&clk IMX8MQ_CLK_OCOTP_ROOT>; 786 #address-cells = <1>; 787 #size-cells = <1>; 788 789 /* 790 * The register address below maps to the MX8M 791 * Fusemap Description Table entries this way. 792 * Assuming 793 * reg = <ADDR SIZE>; 794 * then 795 * Fuse Address = (ADDR * 4) + 0x400 796 * Note that if SIZE is greater than 4, then 797 * each subsequent fuse is located at offset 798 * +0x10 in Fusemap Description Table (e.g. 799 * reg = <0x4 0x8> describes fuses 0x410 and 800 * 0x420). 801 */ 802 imx8mq_uid: soc-uid@4 { /* 0x410-0x420 */ 803 reg = <0x4 0x8>; 804 }; 805 806 cpu_speed_grade: speed-grade@10 { /* 0x440 */ 807 reg = <0x10 4>; 808 }; 809 810 fec_mac_address: mac-address@90 { /* 0x640 */ 811 reg = <0x90 6>; 812 }; 813 }; 814 815 anatop: clock-controller@30360000 { 816 compatible = "fsl,imx8mq-anatop"; 817 reg = <0x30360000 0x10000>; 818 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; 819 #clock-cells = <1>; 820 }; 821 822 snvs: snvs@30370000 { 823 compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; 824 reg = <0x30370000 0x10000>; 825 826 snvs_rtc: snvs-rtc-lp { 827 compatible = "fsl,sec-v4.0-mon-rtc-lp"; 828 regmap = <&snvs>; 829 offset = <0x34>; 830 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, 831 <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; 832 clocks = <&clk IMX8MQ_CLK_SNVS_ROOT>; 833 clock-names = "snvs-rtc"; 834 }; 835 836 snvs_pwrkey: snvs-powerkey { 837 compatible = "fsl,sec-v4.0-pwrkey"; 838 regmap = <&snvs>; 839 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; 840 clocks = <&clk IMX8MQ_CLK_SNVS_ROOT>; 841 clock-names = "snvs-pwrkey"; 842 linux,keycode = <KEY_POWER>; 843 wakeup-source; 844 status = "disabled"; 845 }; 846 }; 847 848 clk: clock-controller@30380000 { 849 compatible = "fsl,imx8mq-ccm"; 850 reg = <0x30380000 0x10000>; 851 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, 852 <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; 853 #clock-cells = <1>; 854 clocks = <&ckil>, <&osc_25m>, <&osc_27m>, 855 <&clk_ext1>, <&clk_ext2>, 856 <&clk_ext3>, <&clk_ext4>; 857 clock-names = "ckil", "osc_25m", "osc_27m", 858 "clk_ext1", "clk_ext2", 859 "clk_ext3", "clk_ext4"; 860 assigned-clocks = <&clk IMX8MQ_CLK_A53_SRC>, 861 <&clk IMX8MQ_CLK_A53_CORE>, 862 <&clk IMX8MQ_CLK_NOC>, 863 <&clk IMX8MQ_CLK_AUDIO_AHB>, 864 <&clk IMX8MQ_AUDIO_PLL1_BYPASS>, 865 <&clk IMX8MQ_AUDIO_PLL2_BYPASS>, 866 <&clk IMX8MQ_AUDIO_PLL1>, 867 <&clk IMX8MQ_AUDIO_PLL2>; 868 assigned-clock-rates = <0>, <0>, 869 <800000000>, 870 <0>, 871 <0>, 872 <0>, 873 <786432000>, 874 <722534400>; 875 assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_800M>, 876 <&clk IMX8MQ_ARM_PLL_OUT>, 877 <0>, 878 <&clk IMX8MQ_SYS2_PLL_500M>, 879 <&clk IMX8MQ_AUDIO_PLL1>, 880 <&clk IMX8MQ_AUDIO_PLL2>; 881 }; 882 883 src: reset-controller@30390000 { 884 compatible = "fsl,imx8mq-src", "syscon"; 885 reg = <0x30390000 0x10000>; 886 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; 887 #reset-cells = <1>; 888 }; 889 890 gpc: gpc@303a0000 { 891 compatible = "fsl,imx8mq-gpc"; 892 reg = <0x303a0000 0x10000>; 893 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; 894 interrupt-parent = <&gic>; 895 interrupt-controller; 896 #interrupt-cells = <3>; 897 898 pgc { 899 #address-cells = <1>; 900 #size-cells = <0>; 901 902 pgc_mipi: power-domain@0 { 903 #power-domain-cells = <0>; 904 reg = <IMX8M_POWER_DOMAIN_MIPI>; 905 }; 906 907 /* 908 * As per comment in ATF source code: 909 * 910 * PCIE1 and PCIE2 share the 911 * same reset signal, if we 912 * power down PCIE2, PCIE1 913 * will be held in reset too. 914 * 915 * So instead of creating two 916 * separate power domains for 917 * PCIE1 and PCIE2 we create a 918 * link between both and use 919 * it as a shared PCIE power 920 * domain. 921 */ 922 pgc_pcie: power-domain@1 { 923 #power-domain-cells = <0>; 924 reg = <IMX8M_POWER_DOMAIN_PCIE1>; 925 power-domains = <&pgc_pcie2>; 926 }; 927 928 pgc_otg1: power-domain@2 { 929 #power-domain-cells = <0>; 930 reg = <IMX8M_POWER_DOMAIN_USB_OTG1>; 931 }; 932 933 pgc_otg2: power-domain@3 { 934 #power-domain-cells = <0>; 935 reg = <IMX8M_POWER_DOMAIN_USB_OTG2>; 936 }; 937 938 pgc_ddr1: power-domain@4 { 939 #power-domain-cells = <0>; 940 reg = <IMX8M_POWER_DOMAIN_DDR1>; 941 }; 942 943 pgc_gpu: power-domain@5 { 944 #power-domain-cells = <0>; 945 reg = <IMX8M_POWER_DOMAIN_GPU>; 946 clocks = <&clk IMX8MQ_CLK_GPU_ROOT>, 947 <&clk IMX8MQ_CLK_GPU_SHADER_DIV>, 948 <&clk IMX8MQ_CLK_GPU_AXI>, 949 <&clk IMX8MQ_CLK_GPU_AHB>; 950 }; 951 952 pgc_vpu: power-domain@6 { 953 #power-domain-cells = <0>; 954 reg = <IMX8M_POWER_DOMAIN_VPU>; 955 clocks = <&clk IMX8MQ_CLK_VPU_DEC_ROOT>, 956 <&clk IMX8MQ_CLK_VPU_G1_ROOT>, 957 <&clk IMX8MQ_CLK_VPU_G2_ROOT>; 958 assigned-clocks = <&clk IMX8MQ_CLK_VPU_G1>, 959 <&clk IMX8MQ_CLK_VPU_G2>, 960 <&clk IMX8MQ_CLK_VPU_BUS>, 961 <&clk IMX8MQ_VPU_PLL_BYPASS>; 962 assigned-clock-parents = <&clk IMX8MQ_VPU_PLL_OUT>, 963 <&clk IMX8MQ_VPU_PLL_OUT>, 964 <&clk IMX8MQ_SYS1_PLL_800M>, 965 <&clk IMX8MQ_VPU_PLL>; 966 assigned-clock-rates = <600000000>, 967 <300000000>, 968 <800000000>, 969 <0>; 970 }; 971 972 pgc_disp: power-domain@7 { 973 #power-domain-cells = <0>; 974 reg = <IMX8M_POWER_DOMAIN_DISP>; 975 }; 976 977 pgc_mipi_csi1: power-domain@8 { 978 #power-domain-cells = <0>; 979 reg = <IMX8M_POWER_DOMAIN_MIPI_CSI1>; 980 }; 981 982 pgc_mipi_csi2: power-domain@9 { 983 #power-domain-cells = <0>; 984 reg = <IMX8M_POWER_DOMAIN_MIPI_CSI2>; 985 }; 986 987 pgc_pcie2: power-domain@a { 988 #power-domain-cells = <0>; 989 reg = <IMX8M_POWER_DOMAIN_PCIE2>; 990 }; 991 }; 992 }; 993 }; 994 995 aips2: bus@30400000 { /* AIPS2 */ 996 compatible = "fsl,aips-bus", "simple-bus"; 997 reg = <0x30400000 0x400000>; 998 #address-cells = <1>; 999 #size-cells = <1>; 1000 ranges = <0x30400000 0x30400000 0x400000>; 1001 1002 pwm1: pwm@30660000 { 1003 compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm"; 1004 reg = <0x30660000 0x10000>; 1005 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; 1006 clocks = <&clk IMX8MQ_CLK_PWM1_ROOT>, 1007 <&clk IMX8MQ_CLK_PWM1_ROOT>; 1008 clock-names = "ipg", "per"; 1009 #pwm-cells = <3>; 1010 status = "disabled"; 1011 }; 1012 1013 pwm2: pwm@30670000 { 1014 compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm"; 1015 reg = <0x30670000 0x10000>; 1016 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; 1017 clocks = <&clk IMX8MQ_CLK_PWM2_ROOT>, 1018 <&clk IMX8MQ_CLK_PWM2_ROOT>; 1019 clock-names = "ipg", "per"; 1020 #pwm-cells = <3>; 1021 status = "disabled"; 1022 }; 1023 1024 pwm3: pwm@30680000 { 1025 compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm"; 1026 reg = <0x30680000 0x10000>; 1027 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; 1028 clocks = <&clk IMX8MQ_CLK_PWM3_ROOT>, 1029 <&clk IMX8MQ_CLK_PWM3_ROOT>; 1030 clock-names = "ipg", "per"; 1031 #pwm-cells = <3>; 1032 status = "disabled"; 1033 }; 1034 1035 pwm4: pwm@30690000 { 1036 compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm"; 1037 reg = <0x30690000 0x10000>; 1038 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; 1039 clocks = <&clk IMX8MQ_CLK_PWM4_ROOT>, 1040 <&clk IMX8MQ_CLK_PWM4_ROOT>; 1041 clock-names = "ipg", "per"; 1042 #pwm-cells = <3>; 1043 status = "disabled"; 1044 }; 1045 1046 system_counter: timer@306a0000 { 1047 compatible = "nxp,sysctr-timer"; 1048 reg = <0x306a0000 0x20000>; 1049 interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; 1050 clocks = <&osc_25m>; 1051 clock-names = "per"; 1052 }; 1053 }; 1054 1055 aips3: bus@30800000 { /* AIPS3 */ 1056 compatible = "fsl,aips-bus", "simple-bus"; 1057 reg = <0x30800000 0x400000>; 1058 #address-cells = <1>; 1059 #size-cells = <1>; 1060 ranges = <0x30800000 0x30800000 0x400000>, 1061 <0x08000000 0x08000000 0x10000000>; 1062 1063 spdif1: spdif@30810000 { 1064 compatible = "fsl,imx35-spdif"; 1065 reg = <0x30810000 0x10000>; 1066 interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; 1067 clocks = <&clk IMX8MQ_CLK_IPG_ROOT>, /* core */ 1068 <&clk IMX8MQ_CLK_25M>, /* rxtx0 */ 1069 <&clk IMX8MQ_CLK_SPDIF1>, /* rxtx1 */ 1070 <&clk IMX8MQ_CLK_DUMMY>, /* rxtx2 */ 1071 <&clk IMX8MQ_CLK_DUMMY>, /* rxtx3 */ 1072 <&clk IMX8MQ_CLK_DUMMY>, /* rxtx4 */ 1073 <&clk IMX8MQ_CLK_IPG_ROOT>, /* rxtx5 */ 1074 <&clk IMX8MQ_CLK_DUMMY>, /* rxtx6 */ 1075 <&clk IMX8MQ_CLK_DUMMY>, /* rxtx7 */ 1076 <&clk IMX8MQ_CLK_DUMMY>; /* spba */ 1077 clock-names = "core", "rxtx0", 1078 "rxtx1", "rxtx2", 1079 "rxtx3", "rxtx4", 1080 "rxtx5", "rxtx6", 1081 "rxtx7", "spba"; 1082 dmas = <&sdma1 8 18 0>, <&sdma1 9 18 0>; 1083 dma-names = "rx", "tx"; 1084 status = "disabled"; 1085 }; 1086 1087 ecspi1: spi@30820000 { 1088 #address-cells = <1>; 1089 #size-cells = <0>; 1090 compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi"; 1091 reg = <0x30820000 0x10000>; 1092 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; 1093 clocks = <&clk IMX8MQ_CLK_ECSPI1_ROOT>, 1094 <&clk IMX8MQ_CLK_ECSPI1_ROOT>; 1095 clock-names = "ipg", "per"; 1096 dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>; 1097 dma-names = "rx", "tx"; 1098 status = "disabled"; 1099 }; 1100 1101 ecspi2: spi@30830000 { 1102 #address-cells = <1>; 1103 #size-cells = <0>; 1104 compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi"; 1105 reg = <0x30830000 0x10000>; 1106 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; 1107 clocks = <&clk IMX8MQ_CLK_ECSPI2_ROOT>, 1108 <&clk IMX8MQ_CLK_ECSPI2_ROOT>; 1109 clock-names = "ipg", "per"; 1110 dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>; 1111 dma-names = "rx", "tx"; 1112 status = "disabled"; 1113 }; 1114 1115 ecspi3: spi@30840000 { 1116 #address-cells = <1>; 1117 #size-cells = <0>; 1118 compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi"; 1119 reg = <0x30840000 0x10000>; 1120 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; 1121 clocks = <&clk IMX8MQ_CLK_ECSPI3_ROOT>, 1122 <&clk IMX8MQ_CLK_ECSPI3_ROOT>; 1123 clock-names = "ipg", "per"; 1124 dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>; 1125 dma-names = "rx", "tx"; 1126 status = "disabled"; 1127 }; 1128 1129 uart1: serial@30860000 { 1130 compatible = "fsl,imx8mq-uart", 1131 "fsl,imx6q-uart"; 1132 reg = <0x30860000 0x10000>; 1133 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; 1134 clocks = <&clk IMX8MQ_CLK_UART1_ROOT>, 1135 <&clk IMX8MQ_CLK_UART1_ROOT>; 1136 clock-names = "ipg", "per"; 1137 dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>; 1138 dma-names = "rx", "tx"; 1139 status = "disabled"; 1140 }; 1141 1142 uart3: serial@30880000 { 1143 compatible = "fsl,imx8mq-uart", 1144 "fsl,imx6q-uart"; 1145 reg = <0x30880000 0x10000>; 1146 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; 1147 clocks = <&clk IMX8MQ_CLK_UART3_ROOT>, 1148 <&clk IMX8MQ_CLK_UART3_ROOT>; 1149 clock-names = "ipg", "per"; 1150 dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>; 1151 dma-names = "rx", "tx"; 1152 status = "disabled"; 1153 }; 1154 1155 uart2: serial@30890000 { 1156 compatible = "fsl,imx8mq-uart", 1157 "fsl,imx6q-uart"; 1158 reg = <0x30890000 0x10000>; 1159 interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; 1160 clocks = <&clk IMX8MQ_CLK_UART2_ROOT>, 1161 <&clk IMX8MQ_CLK_UART2_ROOT>; 1162 clock-names = "ipg", "per"; 1163 dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>; 1164 dma-names = "rx", "tx"; 1165 status = "disabled"; 1166 }; 1167 1168 spdif2: spdif@308a0000 { 1169 compatible = "fsl,imx35-spdif"; 1170 reg = <0x308a0000 0x10000>; 1171 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; 1172 clocks = <&clk IMX8MQ_CLK_IPG_ROOT>, /* core */ 1173 <&clk IMX8MQ_CLK_25M>, /* rxtx0 */ 1174 <&clk IMX8MQ_CLK_SPDIF2>, /* rxtx1 */ 1175 <&clk IMX8MQ_CLK_DUMMY>, /* rxtx2 */ 1176 <&clk IMX8MQ_CLK_DUMMY>, /* rxtx3 */ 1177 <&clk IMX8MQ_CLK_DUMMY>, /* rxtx4 */ 1178 <&clk IMX8MQ_CLK_IPG_ROOT>, /* rxtx5 */ 1179 <&clk IMX8MQ_CLK_DUMMY>, /* rxtx6 */ 1180 <&clk IMX8MQ_CLK_DUMMY>, /* rxtx7 */ 1181 <&clk IMX8MQ_CLK_DUMMY>; /* spba */ 1182 clock-names = "core", "rxtx0", 1183 "rxtx1", "rxtx2", 1184 "rxtx3", "rxtx4", 1185 "rxtx5", "rxtx6", 1186 "rxtx7", "spba"; 1187 dmas = <&sdma1 16 18 0>, <&sdma1 17 18 0>; 1188 dma-names = "rx", "tx"; 1189 status = "disabled"; 1190 }; 1191 1192 sai2: sai@308b0000 { 1193 #sound-dai-cells = <0>; 1194 compatible = "fsl,imx8mq-sai"; 1195 reg = <0x308b0000 0x10000>; 1196 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; 1197 clocks = <&clk IMX8MQ_CLK_SAI2_IPG>, 1198 <&clk IMX8MQ_CLK_SAI2_ROOT>, 1199 <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>; 1200 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 1201 dmas = <&sdma1 10 24 0>, <&sdma1 11 24 0>; 1202 dma-names = "rx", "tx"; 1203 status = "disabled"; 1204 }; 1205 1206 sai3: sai@308c0000 { 1207 #sound-dai-cells = <0>; 1208 compatible = "fsl,imx8mq-sai"; 1209 reg = <0x308c0000 0x10000>; 1210 interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; 1211 clocks = <&clk IMX8MQ_CLK_SAI3_IPG>, 1212 <&clk IMX8MQ_CLK_SAI3_ROOT>, 1213 <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>; 1214 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 1215 dmas = <&sdma1 12 24 0>, <&sdma1 13 24 0>; 1216 dma-names = "rx", "tx"; 1217 status = "disabled"; 1218 }; 1219 1220 crypto: crypto@30900000 { 1221 compatible = "fsl,sec-v4.0"; 1222 #address-cells = <1>; 1223 #size-cells = <1>; 1224 reg = <0x30900000 0x40000>; 1225 ranges = <0 0x30900000 0x40000>; 1226 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; 1227 clocks = <&clk IMX8MQ_CLK_AHB>, 1228 <&clk IMX8MQ_CLK_IPG_ROOT>; 1229 clock-names = "aclk", "ipg"; 1230 1231 sec_jr0: jr@1000 { 1232 compatible = "fsl,sec-v4.0-job-ring"; 1233 reg = <0x1000 0x1000>; 1234 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; 1235 status = "disabled"; 1236 }; 1237 1238 sec_jr1: jr@2000 { 1239 compatible = "fsl,sec-v4.0-job-ring"; 1240 reg = <0x2000 0x1000>; 1241 interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; 1242 }; 1243 1244 sec_jr2: jr@3000 { 1245 compatible = "fsl,sec-v4.0-job-ring"; 1246 reg = <0x3000 0x1000>; 1247 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; 1248 }; 1249 }; 1250 1251 mipi_dsi: dsi@30a00000 { 1252 compatible = "fsl,imx8mq-nwl-dsi"; 1253 reg = <0x30a00000 0x300>; 1254 #address-cells = <1>; 1255 #size-cells = <0>; 1256 clocks = <&clk IMX8MQ_CLK_DSI_CORE>, 1257 <&clk IMX8MQ_CLK_DSI_AHB>, 1258 <&clk IMX8MQ_CLK_DSI_IPG_DIV>, 1259 <&clk IMX8MQ_CLK_DSI_PHY_REF>, 1260 <&clk IMX8MQ_CLK_LCDIF_PIXEL>; 1261 clock-names = "core", "rx_esc", "tx_esc", "phy_ref", "lcdif"; 1262 assigned-clocks = <&clk IMX8MQ_CLK_DSI_AHB>, 1263 <&clk IMX8MQ_CLK_DSI_CORE>, 1264 <&clk IMX8MQ_CLK_DSI_IPG_DIV>; 1265 assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>, 1266 <&clk IMX8MQ_SYS1_PLL_266M>; 1267 assigned-clock-rates = <80000000>, <266000000>, <20000000>; 1268 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; 1269 mux-controls = <&mux 0>; 1270 power-domains = <&pgc_mipi>; 1271 phys = <&dphy>; 1272 phy-names = "dphy"; 1273 resets = <&src IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N>, 1274 <&src IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N>, 1275 <&src IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N>, 1276 <&src IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N>; 1277 reset-names = "byte", "dpi", "esc", "pclk"; 1278 status = "disabled"; 1279 1280 ports { 1281 #address-cells = <1>; 1282 #size-cells = <0>; 1283 1284 port@0 { 1285 reg = <0>; 1286 #address-cells = <1>; 1287 #size-cells = <0>; 1288 mipi_dsi_lcdif_in: endpoint@0 { 1289 reg = <0>; 1290 remote-endpoint = <&lcdif_mipi_dsi>; 1291 }; 1292 }; 1293 }; 1294 }; 1295 1296 dphy: dphy@30a00300 { 1297 compatible = "fsl,imx8mq-mipi-dphy"; 1298 reg = <0x30a00300 0x100>; 1299 clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>; 1300 clock-names = "phy_ref"; 1301 assigned-clocks = <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>, 1302 <&clk IMX8MQ_VIDEO_PLL1_BYPASS>, 1303 <&clk IMX8MQ_CLK_DSI_PHY_REF>, 1304 <&clk IMX8MQ_VIDEO_PLL1>; 1305 assigned-clock-parents = <&clk IMX8MQ_CLK_25M>, 1306 <&clk IMX8MQ_VIDEO_PLL1>, 1307 <&clk IMX8MQ_VIDEO_PLL1_OUT>; 1308 assigned-clock-rates = <0>, <0>, <24000000>, <594000000>; 1309 #phy-cells = <0>; 1310 power-domains = <&pgc_mipi>; 1311 status = "disabled"; 1312 }; 1313 1314 i2c1: i2c@30a20000 { 1315 compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c"; 1316 reg = <0x30a20000 0x10000>; 1317 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; 1318 clocks = <&clk IMX8MQ_CLK_I2C1_ROOT>; 1319 #address-cells = <1>; 1320 #size-cells = <0>; 1321 status = "disabled"; 1322 }; 1323 1324 i2c2: i2c@30a30000 { 1325 compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c"; 1326 reg = <0x30a30000 0x10000>; 1327 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; 1328 clocks = <&clk IMX8MQ_CLK_I2C2_ROOT>; 1329 #address-cells = <1>; 1330 #size-cells = <0>; 1331 status = "disabled"; 1332 }; 1333 1334 i2c3: i2c@30a40000 { 1335 compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c"; 1336 reg = <0x30a40000 0x10000>; 1337 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; 1338 clocks = <&clk IMX8MQ_CLK_I2C3_ROOT>; 1339 #address-cells = <1>; 1340 #size-cells = <0>; 1341 status = "disabled"; 1342 }; 1343 1344 i2c4: i2c@30a50000 { 1345 compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c"; 1346 reg = <0x30a50000 0x10000>; 1347 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; 1348 clocks = <&clk IMX8MQ_CLK_I2C4_ROOT>; 1349 #address-cells = <1>; 1350 #size-cells = <0>; 1351 status = "disabled"; 1352 }; 1353 1354 uart4: serial@30a60000 { 1355 compatible = "fsl,imx8mq-uart", 1356 "fsl,imx6q-uart"; 1357 reg = <0x30a60000 0x10000>; 1358 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; 1359 clocks = <&clk IMX8MQ_CLK_UART4_ROOT>, 1360 <&clk IMX8MQ_CLK_UART4_ROOT>; 1361 clock-names = "ipg", "per"; 1362 dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>; 1363 dma-names = "rx", "tx"; 1364 status = "disabled"; 1365 }; 1366 1367 mipi_csi1: csi@30a70000 { 1368 compatible = "fsl,imx8mq-mipi-csi2"; 1369 reg = <0x30a70000 0x1000>; 1370 clocks = <&clk IMX8MQ_CLK_CSI1_CORE>, 1371 <&clk IMX8MQ_CLK_CSI1_ESC>, 1372 <&clk IMX8MQ_CLK_CSI1_PHY_REF>; 1373 clock-names = "core", "esc", "ui"; 1374 assigned-clocks = <&clk IMX8MQ_CLK_CSI1_CORE>, 1375 <&clk IMX8MQ_CLK_CSI1_PHY_REF>, 1376 <&clk IMX8MQ_CLK_CSI1_ESC>; 1377 assigned-clock-rates = <266000000>, <333000000>, <66000000>; 1378 assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>, 1379 <&clk IMX8MQ_SYS2_PLL_1000M>, 1380 <&clk IMX8MQ_SYS1_PLL_800M>; 1381 power-domains = <&pgc_mipi_csi1>; 1382 resets = <&src IMX8MQ_RESET_MIPI_CSI1_CORE_RESET>, 1383 <&src IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET>, 1384 <&src IMX8MQ_RESET_MIPI_CSI1_ESC_RESET>; 1385 fsl,mipi-phy-gpr = <&iomuxc_gpr 0x88>; 1386 interconnects = <&noc IMX8MQ_ICM_CSI1 &noc IMX8MQ_ICS_DRAM>; 1387 interconnect-names = "dram"; 1388 status = "disabled"; 1389 1390 ports { 1391 #address-cells = <1>; 1392 #size-cells = <0>; 1393 1394 port@1 { 1395 reg = <1>; 1396 1397 csi1_mipi_ep: endpoint { 1398 remote-endpoint = <&csi1_ep>; 1399 }; 1400 }; 1401 }; 1402 }; 1403 1404 csi1: csi@30a90000 { 1405 compatible = "fsl,imx8mq-csi"; 1406 reg = <0x30a90000 0x10000>; 1407 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; 1408 clocks = <&clk IMX8MQ_CLK_CSI1_ROOT>; 1409 clock-names = "mclk"; 1410 status = "disabled"; 1411 1412 port { 1413 csi1_ep: endpoint { 1414 remote-endpoint = <&csi1_mipi_ep>; 1415 }; 1416 }; 1417 }; 1418 1419 mipi_csi2: csi@30b60000 { 1420 compatible = "fsl,imx8mq-mipi-csi2"; 1421 reg = <0x30b60000 0x1000>; 1422 clocks = <&clk IMX8MQ_CLK_CSI2_CORE>, 1423 <&clk IMX8MQ_CLK_CSI2_ESC>, 1424 <&clk IMX8MQ_CLK_CSI2_PHY_REF>; 1425 clock-names = "core", "esc", "ui"; 1426 assigned-clocks = <&clk IMX8MQ_CLK_CSI2_CORE>, 1427 <&clk IMX8MQ_CLK_CSI2_PHY_REF>, 1428 <&clk IMX8MQ_CLK_CSI2_ESC>; 1429 assigned-clock-rates = <266000000>, <333000000>, <66000000>; 1430 assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>, 1431 <&clk IMX8MQ_SYS2_PLL_1000M>, 1432 <&clk IMX8MQ_SYS1_PLL_800M>; 1433 power-domains = <&pgc_mipi_csi2>; 1434 resets = <&src IMX8MQ_RESET_MIPI_CSI2_CORE_RESET>, 1435 <&src IMX8MQ_RESET_MIPI_CSI2_PHY_REF_RESET>, 1436 <&src IMX8MQ_RESET_MIPI_CSI2_ESC_RESET>; 1437 fsl,mipi-phy-gpr = <&iomuxc_gpr 0xa4>; 1438 interconnects = <&noc IMX8MQ_ICM_CSI2 &noc IMX8MQ_ICS_DRAM>; 1439 interconnect-names = "dram"; 1440 status = "disabled"; 1441 1442 ports { 1443 #address-cells = <1>; 1444 #size-cells = <0>; 1445 1446 port@1 { 1447 reg = <1>; 1448 1449 csi2_mipi_ep: endpoint { 1450 remote-endpoint = <&csi2_ep>; 1451 }; 1452 }; 1453 }; 1454 }; 1455 1456 csi2: csi@30b80000 { 1457 compatible = "fsl,imx8mq-csi"; 1458 reg = <0x30b80000 0x10000>; 1459 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; 1460 clocks = <&clk IMX8MQ_CLK_CSI2_ROOT>; 1461 clock-names = "mclk"; 1462 status = "disabled"; 1463 1464 port { 1465 csi2_ep: endpoint { 1466 remote-endpoint = <&csi2_mipi_ep>; 1467 }; 1468 }; 1469 }; 1470 1471 mu: mailbox@30aa0000 { 1472 compatible = "fsl,imx8mq-mu", "fsl,imx6sx-mu"; 1473 reg = <0x30aa0000 0x10000>; 1474 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; 1475 clocks = <&clk IMX8MQ_CLK_MU_ROOT>; 1476 #mbox-cells = <2>; 1477 }; 1478 1479 usdhc1: mmc@30b40000 { 1480 compatible = "fsl,imx8mq-usdhc", 1481 "fsl,imx7d-usdhc"; 1482 reg = <0x30b40000 0x10000>; 1483 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; 1484 clocks = <&clk IMX8MQ_CLK_IPG_ROOT>, 1485 <&clk IMX8MQ_CLK_NAND_USDHC_BUS>, 1486 <&clk IMX8MQ_CLK_USDHC1_ROOT>; 1487 clock-names = "ipg", "ahb", "per"; 1488 fsl,tuning-start-tap = <20>; 1489 fsl,tuning-step = <2>; 1490 bus-width = <4>; 1491 status = "disabled"; 1492 }; 1493 1494 usdhc2: mmc@30b50000 { 1495 compatible = "fsl,imx8mq-usdhc", 1496 "fsl,imx7d-usdhc"; 1497 reg = <0x30b50000 0x10000>; 1498 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; 1499 clocks = <&clk IMX8MQ_CLK_IPG_ROOT>, 1500 <&clk IMX8MQ_CLK_NAND_USDHC_BUS>, 1501 <&clk IMX8MQ_CLK_USDHC2_ROOT>; 1502 clock-names = "ipg", "ahb", "per"; 1503 fsl,tuning-start-tap = <20>; 1504 fsl,tuning-step = <2>; 1505 bus-width = <4>; 1506 status = "disabled"; 1507 }; 1508 1509 qspi0: spi@30bb0000 { 1510 #address-cells = <1>; 1511 #size-cells = <0>; 1512 compatible = "fsl,imx8mq-qspi", "fsl,imx7d-qspi"; 1513 reg = <0x30bb0000 0x10000>, 1514 <0x08000000 0x10000000>; 1515 reg-names = "QuadSPI", "QuadSPI-memory"; 1516 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; 1517 clocks = <&clk IMX8MQ_CLK_QSPI_ROOT>, 1518 <&clk IMX8MQ_CLK_QSPI_ROOT>; 1519 clock-names = "qspi_en", "qspi"; 1520 status = "disabled"; 1521 }; 1522 1523 sdma1: dma-controller@30bd0000 { 1524 compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma"; 1525 reg = <0x30bd0000 0x10000>; 1526 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; 1527 clocks = <&clk IMX8MQ_CLK_SDMA1_ROOT>, 1528 <&clk IMX8MQ_CLK_AHB>; 1529 clock-names = "ipg", "ahb"; 1530 #dma-cells = <3>; 1531 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; 1532 }; 1533 1534 fec1: ethernet@30be0000 { 1535 compatible = "fsl,imx8mq-fec", "fsl,imx6sx-fec"; 1536 reg = <0x30be0000 0x10000>; 1537 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, 1538 <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, 1539 <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, 1540 <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; 1541 clocks = <&clk IMX8MQ_CLK_ENET1_ROOT>, 1542 <&clk IMX8MQ_CLK_ENET1_ROOT>, 1543 <&clk IMX8MQ_CLK_ENET_TIMER>, 1544 <&clk IMX8MQ_CLK_ENET_REF>, 1545 <&clk IMX8MQ_CLK_ENET_PHY_REF>; 1546 clock-names = "ipg", "ahb", "ptp", 1547 "enet_clk_ref", "enet_out"; 1548 assigned-clocks = <&clk IMX8MQ_CLK_ENET_AXI>, 1549 <&clk IMX8MQ_CLK_ENET_TIMER>, 1550 <&clk IMX8MQ_CLK_ENET_REF>, 1551 <&clk IMX8MQ_CLK_ENET_PHY_REF>; 1552 assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>, 1553 <&clk IMX8MQ_SYS2_PLL_100M>, 1554 <&clk IMX8MQ_SYS2_PLL_125M>, 1555 <&clk IMX8MQ_SYS2_PLL_50M>; 1556 assigned-clock-rates = <0>, <100000000>, <125000000>, <0>; 1557 fsl,num-tx-queues = <3>; 1558 fsl,num-rx-queues = <3>; 1559 nvmem-cells = <&fec_mac_address>; 1560 nvmem-cell-names = "mac-address"; 1561 fsl,stop-mode = <&iomuxc_gpr 0x10 3>; 1562 status = "disabled"; 1563 }; 1564 }; 1565 1566 noc: interconnect@32700000 { 1567 compatible = "fsl,imx8mq-noc", "fsl,imx8m-noc"; 1568 reg = <0x32700000 0x100000>; 1569 clocks = <&clk IMX8MQ_CLK_NOC>; 1570 fsl,ddrc = <&ddrc>; 1571 #interconnect-cells = <1>; 1572 operating-points-v2 = <&noc_opp_table>; 1573 1574 noc_opp_table: opp-table { 1575 compatible = "operating-points-v2"; 1576 1577 opp-133000000 { 1578 opp-hz = /bits/ 64 <133333333>; 1579 }; 1580 1581 opp-400000000 { 1582 opp-hz = /bits/ 64 <400000000>; 1583 }; 1584 1585 opp-800000000 { 1586 opp-hz = /bits/ 64 <800000000>; 1587 }; 1588 }; 1589 }; 1590 1591 aips4: bus@32c00000 { /* AIPS4 */ 1592 compatible = "fsl,aips-bus", "simple-bus"; 1593 reg = <0x32c00000 0x400000>; 1594 #address-cells = <1>; 1595 #size-cells = <1>; 1596 ranges = <0x32c00000 0x32c00000 0x400000>; 1597 1598 irqsteer: interrupt-controller@32e2d000 { 1599 compatible = "fsl,imx8m-irqsteer", "fsl,imx-irqsteer"; 1600 reg = <0x32e2d000 0x1000>; 1601 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; 1602 clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>; 1603 clock-names = "ipg"; 1604 fsl,channel = <0>; 1605 fsl,num-irqs = <64>; 1606 interrupt-controller; 1607 #interrupt-cells = <1>; 1608 }; 1609 }; 1610 1611 gpu: gpu@38000000 { 1612 compatible = "vivante,gc"; 1613 reg = <0x38000000 0x40000>; 1614 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; 1615 clocks = <&clk IMX8MQ_CLK_GPU_ROOT>, 1616 <&clk IMX8MQ_CLK_GPU_SHADER_DIV>, 1617 <&clk IMX8MQ_CLK_GPU_AXI>, 1618 <&clk IMX8MQ_CLK_GPU_AHB>; 1619 clock-names = "core", "shader", "bus", "reg"; 1620 #cooling-cells = <2>; 1621 assigned-clocks = <&clk IMX8MQ_CLK_GPU_CORE_SRC>, 1622 <&clk IMX8MQ_CLK_GPU_SHADER_SRC>, 1623 <&clk IMX8MQ_CLK_GPU_AXI>, 1624 <&clk IMX8MQ_CLK_GPU_AHB>, 1625 <&clk IMX8MQ_GPU_PLL_BYPASS>; 1626 assigned-clock-parents = <&clk IMX8MQ_GPU_PLL_OUT>, 1627 <&clk IMX8MQ_GPU_PLL_OUT>, 1628 <&clk IMX8MQ_GPU_PLL_OUT>, 1629 <&clk IMX8MQ_GPU_PLL_OUT>, 1630 <&clk IMX8MQ_GPU_PLL>; 1631 assigned-clock-rates = <800000000>, <800000000>, 1632 <800000000>, <800000000>, <0>; 1633 power-domains = <&pgc_gpu>; 1634 }; 1635 1636 usb_dwc3_0: usb@38100000 { 1637 compatible = "fsl,imx8mq-dwc3", "snps,dwc3"; 1638 reg = <0x38100000 0x10000>; 1639 clocks = <&clk IMX8MQ_CLK_USB1_CTRL_ROOT>, 1640 <&clk IMX8MQ_CLK_USB_CORE_REF>, 1641 <&clk IMX8MQ_CLK_32K>; 1642 clock-names = "bus_early", "ref", "suspend"; 1643 assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>, 1644 <&clk IMX8MQ_CLK_USB_CORE_REF>; 1645 assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_500M>, 1646 <&clk IMX8MQ_SYS1_PLL_100M>; 1647 assigned-clock-rates = <500000000>, <100000000>; 1648 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; 1649 phys = <&usb3_phy0>, <&usb3_phy0>; 1650 phy-names = "usb2-phy", "usb3-phy"; 1651 power-domains = <&pgc_otg1>; 1652 snps,parkmode-disable-ss-quirk; 1653 status = "disabled"; 1654 }; 1655 1656 usb3_phy0: usb-phy@381f0040 { 1657 compatible = "fsl,imx8mq-usb-phy"; 1658 reg = <0x381f0040 0x40>; 1659 clocks = <&clk IMX8MQ_CLK_USB1_PHY_ROOT>; 1660 clock-names = "phy"; 1661 assigned-clocks = <&clk IMX8MQ_CLK_USB_PHY_REF>; 1662 assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_100M>; 1663 assigned-clock-rates = <100000000>; 1664 #phy-cells = <0>; 1665 status = "disabled"; 1666 }; 1667 1668 usb_dwc3_1: usb@38200000 { 1669 compatible = "fsl,imx8mq-dwc3", "snps,dwc3"; 1670 reg = <0x38200000 0x10000>; 1671 clocks = <&clk IMX8MQ_CLK_USB2_CTRL_ROOT>, 1672 <&clk IMX8MQ_CLK_USB_CORE_REF>, 1673 <&clk IMX8MQ_CLK_32K>; 1674 clock-names = "bus_early", "ref", "suspend"; 1675 assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>, 1676 <&clk IMX8MQ_CLK_USB_CORE_REF>; 1677 assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_500M>, 1678 <&clk IMX8MQ_SYS1_PLL_100M>; 1679 assigned-clock-rates = <500000000>, <100000000>; 1680 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; 1681 phys = <&usb3_phy1>, <&usb3_phy1>; 1682 phy-names = "usb2-phy", "usb3-phy"; 1683 power-domains = <&pgc_otg2>; 1684 snps,parkmode-disable-ss-quirk; 1685 status = "disabled"; 1686 }; 1687 1688 usb3_phy1: usb-phy@382f0040 { 1689 compatible = "fsl,imx8mq-usb-phy"; 1690 reg = <0x382f0040 0x40>; 1691 clocks = <&clk IMX8MQ_CLK_USB2_PHY_ROOT>; 1692 clock-names = "phy"; 1693 assigned-clocks = <&clk IMX8MQ_CLK_USB_PHY_REF>; 1694 assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_100M>; 1695 assigned-clock-rates = <100000000>; 1696 #phy-cells = <0>; 1697 status = "disabled"; 1698 }; 1699 1700 vpu_g1: video-codec@38300000 { 1701 compatible = "nxp,imx8mq-vpu-g1"; 1702 reg = <0x38300000 0x10000>; 1703 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; 1704 clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>; 1705 power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G1>; 1706 }; 1707 1708 vpu_g2: video-codec@38310000 { 1709 compatible = "nxp,imx8mq-vpu-g2"; 1710 reg = <0x38310000 0x10000>; 1711 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; 1712 clocks = <&clk IMX8MQ_CLK_VPU_G2_ROOT>; 1713 power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G2>; 1714 }; 1715 1716 vpu_blk_ctrl: blk-ctrl@38320000 { 1717 compatible = "fsl,imx8mq-vpu-blk-ctrl"; 1718 reg = <0x38320000 0x100>; 1719 power-domains = <&pgc_vpu>, <&pgc_vpu>, <&pgc_vpu>; 1720 power-domain-names = "bus", "g1", "g2"; 1721 clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>, 1722 <&clk IMX8MQ_CLK_VPU_G2_ROOT>; 1723 clock-names = "g1", "g2"; 1724 #power-domain-cells = <1>; 1725 }; 1726 1727 pcie0: pcie@33800000 { 1728 compatible = "fsl,imx8mq-pcie"; 1729 reg = <0x33800000 0x400000>, 1730 <0x1ff00000 0x80000>; 1731 reg-names = "dbi", "config"; 1732 #address-cells = <3>; 1733 #size-cells = <2>; 1734 device_type = "pci"; 1735 bus-range = <0x00 0xff>; 1736 ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000>, /* downstream I/O 64KB */ 1737 <0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */ 1738 num-lanes = <1>; 1739 interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; 1740 interrupt-names = "msi"; 1741 #interrupt-cells = <1>; 1742 interrupt-map-mask = <0 0 0 0x7>; 1743 interrupt-map = <0 0 0 1 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, 1744 <0 0 0 2 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, 1745 <0 0 0 3 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, 1746 <0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; 1747 fsl,max-link-speed = <2>; 1748 linux,pci-domain = <0>; 1749 clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>, 1750 <&clk IMX8MQ_CLK_PCIE1_PHY>, 1751 <&clk IMX8MQ_CLK_PCIE1_PHY>, 1752 <&clk IMX8MQ_CLK_PCIE1_AUX>; 1753 clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux"; 1754 power-domains = <&pgc_pcie>; 1755 resets = <&src IMX8MQ_RESET_PCIEPHY>, 1756 <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>, 1757 <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>; 1758 reset-names = "pciephy", "apps", "turnoff"; 1759 assigned-clocks = <&clk IMX8MQ_CLK_PCIE1_CTRL>, 1760 <&clk IMX8MQ_CLK_PCIE1_PHY>, 1761 <&clk IMX8MQ_CLK_PCIE1_AUX>; 1762 assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>, 1763 <&clk IMX8MQ_SYS2_PLL_100M>, 1764 <&clk IMX8MQ_SYS1_PLL_80M>; 1765 assigned-clock-rates = <250000000>, <100000000>, 1766 <10000000>; 1767 status = "disabled"; 1768 }; 1769 1770 pcie1: pcie@33c00000 { 1771 compatible = "fsl,imx8mq-pcie"; 1772 reg = <0x33c00000 0x400000>, 1773 <0x27f00000 0x80000>; 1774 reg-names = "dbi", "config"; 1775 #address-cells = <3>; 1776 #size-cells = <2>; 1777 device_type = "pci"; 1778 bus-range = <0x00 0xff>; 1779 ranges = <0x81000000 0 0x00000000 0x27f80000 0 0x00010000>, /* downstream I/O 64KB */ 1780 <0x82000000 0 0x20000000 0x20000000 0 0x07f00000>; /* non-prefetchable memory */ 1781 num-lanes = <1>; 1782 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; 1783 interrupt-names = "msi"; 1784 #interrupt-cells = <1>; 1785 interrupt-map-mask = <0 0 0 0x7>; 1786 interrupt-map = <0 0 0 1 &gic GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, 1787 <0 0 0 2 &gic GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, 1788 <0 0 0 3 &gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, 1789 <0 0 0 4 &gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; 1790 fsl,max-link-speed = <2>; 1791 linux,pci-domain = <1>; 1792 clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>, 1793 <&clk IMX8MQ_CLK_PCIE2_PHY>, 1794 <&clk IMX8MQ_CLK_PCIE2_PHY>, 1795 <&clk IMX8MQ_CLK_PCIE2_AUX>; 1796 clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux"; 1797 power-domains = <&pgc_pcie>; 1798 resets = <&src IMX8MQ_RESET_PCIEPHY2>, 1799 <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>, 1800 <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>; 1801 reset-names = "pciephy", "apps", "turnoff"; 1802 assigned-clocks = <&clk IMX8MQ_CLK_PCIE2_CTRL>, 1803 <&clk IMX8MQ_CLK_PCIE2_PHY>, 1804 <&clk IMX8MQ_CLK_PCIE2_AUX>; 1805 assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>, 1806 <&clk IMX8MQ_SYS2_PLL_100M>, 1807 <&clk IMX8MQ_SYS1_PLL_80M>; 1808 assigned-clock-rates = <250000000>, <100000000>, 1809 <10000000>; 1810 status = "disabled"; 1811 }; 1812 1813 pcie1_ep: pcie-ep@33c00000 { 1814 compatible = "fsl,imx8mq-pcie-ep"; 1815 reg = <0x33c00000 0x000400000>, 1816 <0x20000000 0x08000000>; 1817 reg-names = "dbi", "addr_space"; 1818 num-lanes = <1>; 1819 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; 1820 interrupt-names = "dma"; 1821 fsl,max-link-speed = <2>; 1822 clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>, 1823 <&clk IMX8MQ_CLK_PCIE2_PHY>, 1824 <&clk IMX8MQ_CLK_PCIE2_PHY>, 1825 <&clk IMX8MQ_CLK_PCIE2_AUX>; 1826 clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux"; 1827 power-domains = <&pgc_pcie>; 1828 resets = <&src IMX8MQ_RESET_PCIEPHY2>, 1829 <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>, 1830 <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>; 1831 reset-names = "pciephy", "apps", "turnoff"; 1832 assigned-clocks = <&clk IMX8MQ_CLK_PCIE2_CTRL>, 1833 <&clk IMX8MQ_CLK_PCIE2_PHY>, 1834 <&clk IMX8MQ_CLK_PCIE2_AUX>; 1835 assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>, 1836 <&clk IMX8MQ_SYS2_PLL_100M>, 1837 <&clk IMX8MQ_SYS1_PLL_80M>; 1838 assigned-clock-rates = <250000000>, <100000000>, 1839 <10000000>; 1840 num-ib-windows = <4>; 1841 num-ob-windows = <4>; 1842 status = "disabled"; 1843 }; 1844 1845 gic: interrupt-controller@38800000 { 1846 compatible = "arm,gic-v3"; 1847 reg = <0x38800000 0x10000>, /* GIC Dist */ 1848 <0x38880000 0xc0000>, /* GICR */ 1849 <0x31000000 0x2000>, /* GICC */ 1850 <0x31010000 0x2000>, /* GICV */ 1851 <0x31020000 0x2000>; /* GICH */ 1852 #interrupt-cells = <3>; 1853 interrupt-controller; 1854 interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; 1855 interrupt-parent = <&gic>; 1856 }; 1857 1858 ddrc: memory-controller@3d400000 { 1859 compatible = "fsl,imx8mq-ddrc", "fsl,imx8m-ddrc"; 1860 reg = <0x3d400000 0x400000>; 1861 clock-names = "core", "pll", "alt", "apb"; 1862 clocks = <&clk IMX8MQ_CLK_DRAM_CORE>, 1863 <&clk IMX8MQ_DRAM_PLL_OUT>, 1864 <&clk IMX8MQ_CLK_DRAM_ALT>, 1865 <&clk IMX8MQ_CLK_DRAM_APB>; 1866 status = "disabled"; 1867 }; 1868 1869 ddr-pmu@3d800000 { 1870 compatible = "fsl,imx8mq-ddr-pmu", "fsl,imx8m-ddr-pmu"; 1871 reg = <0x3d800000 0x400000>; 1872 interrupt-parent = <&gic>; 1873 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; 1874 }; 1875 }; 1876}; 1877