1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * PCIe driver for Marvell Armada 370 and Armada XP SoCs
4 *
5 * Author: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
6 */
7
8 #include <linux/kernel.h>
9 #include <linux/module.h>
10 #include <linux/pci.h>
11 #include <linux/bitfield.h>
12 #include <linux/clk.h>
13 #include <linux/delay.h>
14 #include <linux/gpio/consumer.h>
15 #include <linux/init.h>
16 #include <linux/irqchip/chained_irq.h>
17 #include <linux/irqdomain.h>
18 #include <linux/mbus.h>
19 #include <linux/slab.h>
20 #include <linux/platform_device.h>
21 #include <linux/of_address.h>
22 #include <linux/of_irq.h>
23 #include <linux/of_pci.h>
24 #include <linux/of_platform.h>
25
26 #include "../pci.h"
27 #include "../pci-bridge-emul.h"
28
29 /*
30 * PCIe unit register offsets.
31 */
32 #define PCIE_DEV_ID_OFF 0x0000
33 #define PCIE_CMD_OFF 0x0004
34 #define PCIE_DEV_REV_OFF 0x0008
35 #define PCIE_BAR_LO_OFF(n) (0x0010 + ((n) << 3))
36 #define PCIE_BAR_HI_OFF(n) (0x0014 + ((n) << 3))
37 #define PCIE_SSDEV_ID_OFF 0x002c
38 #define PCIE_CAP_PCIEXP 0x0060
39 #define PCIE_CAP_PCIERR_OFF 0x0100
40 #define PCIE_BAR_CTRL_OFF(n) (0x1804 + (((n) - 1) * 4))
41 #define PCIE_WIN04_CTRL_OFF(n) (0x1820 + ((n) << 4))
42 #define PCIE_WIN04_BASE_OFF(n) (0x1824 + ((n) << 4))
43 #define PCIE_WIN04_REMAP_OFF(n) (0x182c + ((n) << 4))
44 #define PCIE_WIN5_CTRL_OFF 0x1880
45 #define PCIE_WIN5_BASE_OFF 0x1884
46 #define PCIE_WIN5_REMAP_OFF 0x188c
47 #define PCIE_CONF_ADDR_OFF 0x18f8
48 #define PCIE_CONF_ADDR_EN 0x80000000
49 #define PCIE_CONF_REG(r) ((((r) & 0xf00) << 16) | ((r) & 0xfc))
50 #define PCIE_CONF_BUS(b) (((b) & 0xff) << 16)
51 #define PCIE_CONF_DEV(d) (((d) & 0x1f) << 11)
52 #define PCIE_CONF_FUNC(f) (((f) & 0x7) << 8)
53 #define PCIE_CONF_ADDR(bus, devfn, where) \
54 (PCIE_CONF_BUS(bus) | PCIE_CONF_DEV(PCI_SLOT(devfn)) | \
55 PCIE_CONF_FUNC(PCI_FUNC(devfn)) | PCIE_CONF_REG(where) | \
56 PCIE_CONF_ADDR_EN)
57 #define PCIE_CONF_DATA_OFF 0x18fc
58 #define PCIE_INT_CAUSE_OFF 0x1900
59 #define PCIE_INT_UNMASK_OFF 0x1910
60 #define PCIE_INT_INTX(i) BIT(24+i)
61 #define PCIE_INT_PM_PME BIT(28)
62 #define PCIE_INT_ALL_MASK GENMASK(31, 0)
63 #define PCIE_CTRL_OFF 0x1a00
64 #define PCIE_CTRL_X1_MODE 0x0001
65 #define PCIE_CTRL_RC_MODE BIT(1)
66 #define PCIE_CTRL_MASTER_HOT_RESET BIT(24)
67 #define PCIE_STAT_OFF 0x1a04
68 #define PCIE_STAT_BUS 0xff00
69 #define PCIE_STAT_DEV 0x1f0000
70 #define PCIE_STAT_LINK_DOWN BIT(0)
71 #define PCIE_SSPL_OFF 0x1a0c
72 #define PCIE_SSPL_VALUE_SHIFT 0
73 #define PCIE_SSPL_VALUE_MASK GENMASK(7, 0)
74 #define PCIE_SSPL_SCALE_SHIFT 8
75 #define PCIE_SSPL_SCALE_MASK GENMASK(9, 8)
76 #define PCIE_SSPL_ENABLE BIT(16)
77 #define PCIE_RC_RTSTA 0x1a14
78 #define PCIE_DEBUG_CTRL 0x1a60
79 #define PCIE_DEBUG_SOFT_RESET BIT(20)
80
81 struct mvebu_pcie_port;
82
83 /* Structure representing all PCIe interfaces */
84 struct mvebu_pcie {
85 struct platform_device *pdev;
86 struct mvebu_pcie_port *ports;
87 struct resource io;
88 struct resource realio;
89 struct resource mem;
90 int nports;
91 };
92
93 struct mvebu_pcie_window {
94 phys_addr_t base;
95 phys_addr_t remap;
96 size_t size;
97 };
98
99 /* Structure representing one PCIe interface */
100 struct mvebu_pcie_port {
101 char *name;
102 void __iomem *base;
103 u32 port;
104 u32 lane;
105 bool is_x4;
106 int devfn;
107 unsigned int mem_target;
108 unsigned int mem_attr;
109 unsigned int io_target;
110 unsigned int io_attr;
111 struct clk *clk;
112 struct gpio_desc *reset_gpio;
113 char *reset_name;
114 struct pci_bridge_emul bridge;
115 struct device_node *dn;
116 struct mvebu_pcie *pcie;
117 struct mvebu_pcie_window memwin;
118 struct mvebu_pcie_window iowin;
119 u32 saved_pcie_stat;
120 struct resource regs;
121 u8 slot_power_limit_value;
122 u8 slot_power_limit_scale;
123 struct irq_domain *intx_irq_domain;
124 raw_spinlock_t irq_lock;
125 int intx_irq;
126 };
127
mvebu_writel(struct mvebu_pcie_port * port,u32 val,u32 reg)128 static inline void mvebu_writel(struct mvebu_pcie_port *port, u32 val, u32 reg)
129 {
130 writel(val, port->base + reg);
131 }
132
mvebu_readl(struct mvebu_pcie_port * port,u32 reg)133 static inline u32 mvebu_readl(struct mvebu_pcie_port *port, u32 reg)
134 {
135 return readl(port->base + reg);
136 }
137
mvebu_has_ioport(struct mvebu_pcie_port * port)138 static inline bool mvebu_has_ioport(struct mvebu_pcie_port *port)
139 {
140 return port->io_target != -1 && port->io_attr != -1;
141 }
142
mvebu_pcie_link_up(struct mvebu_pcie_port * port)143 static bool mvebu_pcie_link_up(struct mvebu_pcie_port *port)
144 {
145 return !(mvebu_readl(port, PCIE_STAT_OFF) & PCIE_STAT_LINK_DOWN);
146 }
147
mvebu_pcie_get_local_bus_nr(struct mvebu_pcie_port * port)148 static u8 mvebu_pcie_get_local_bus_nr(struct mvebu_pcie_port *port)
149 {
150 return (mvebu_readl(port, PCIE_STAT_OFF) & PCIE_STAT_BUS) >> 8;
151 }
152
mvebu_pcie_set_local_bus_nr(struct mvebu_pcie_port * port,int nr)153 static void mvebu_pcie_set_local_bus_nr(struct mvebu_pcie_port *port, int nr)
154 {
155 u32 stat;
156
157 stat = mvebu_readl(port, PCIE_STAT_OFF);
158 stat &= ~PCIE_STAT_BUS;
159 stat |= nr << 8;
160 mvebu_writel(port, stat, PCIE_STAT_OFF);
161 }
162
mvebu_pcie_set_local_dev_nr(struct mvebu_pcie_port * port,int nr)163 static void mvebu_pcie_set_local_dev_nr(struct mvebu_pcie_port *port, int nr)
164 {
165 u32 stat;
166
167 stat = mvebu_readl(port, PCIE_STAT_OFF);
168 stat &= ~PCIE_STAT_DEV;
169 stat |= nr << 16;
170 mvebu_writel(port, stat, PCIE_STAT_OFF);
171 }
172
mvebu_pcie_disable_wins(struct mvebu_pcie_port * port)173 static void mvebu_pcie_disable_wins(struct mvebu_pcie_port *port)
174 {
175 int i;
176
177 mvebu_writel(port, 0, PCIE_BAR_LO_OFF(0));
178 mvebu_writel(port, 0, PCIE_BAR_HI_OFF(0));
179
180 for (i = 1; i < 3; i++) {
181 mvebu_writel(port, 0, PCIE_BAR_CTRL_OFF(i));
182 mvebu_writel(port, 0, PCIE_BAR_LO_OFF(i));
183 mvebu_writel(port, 0, PCIE_BAR_HI_OFF(i));
184 }
185
186 for (i = 0; i < 5; i++) {
187 mvebu_writel(port, 0, PCIE_WIN04_CTRL_OFF(i));
188 mvebu_writel(port, 0, PCIE_WIN04_BASE_OFF(i));
189 mvebu_writel(port, 0, PCIE_WIN04_REMAP_OFF(i));
190 }
191
192 mvebu_writel(port, 0, PCIE_WIN5_CTRL_OFF);
193 mvebu_writel(port, 0, PCIE_WIN5_BASE_OFF);
194 mvebu_writel(port, 0, PCIE_WIN5_REMAP_OFF);
195 }
196
197 /*
198 * Setup PCIE BARs and Address Decode Wins:
199 * BAR[0] -> internal registers (needed for MSI)
200 * BAR[1] -> covers all DRAM banks
201 * BAR[2] -> Disabled
202 * WIN[0-3] -> DRAM bank[0-3]
203 */
mvebu_pcie_setup_wins(struct mvebu_pcie_port * port)204 static void mvebu_pcie_setup_wins(struct mvebu_pcie_port *port)
205 {
206 const struct mbus_dram_target_info *dram;
207 u32 size;
208 int i;
209
210 dram = mv_mbus_dram_info();
211
212 /* First, disable and clear BARs and windows. */
213 mvebu_pcie_disable_wins(port);
214
215 /* Setup windows for DDR banks. Count total DDR size on the fly. */
216 size = 0;
217 for (i = 0; i < dram->num_cs; i++) {
218 const struct mbus_dram_window *cs = dram->cs + i;
219
220 mvebu_writel(port, cs->base & 0xffff0000,
221 PCIE_WIN04_BASE_OFF(i));
222 mvebu_writel(port, 0, PCIE_WIN04_REMAP_OFF(i));
223 mvebu_writel(port,
224 ((cs->size - 1) & 0xffff0000) |
225 (cs->mbus_attr << 8) |
226 (dram->mbus_dram_target_id << 4) | 1,
227 PCIE_WIN04_CTRL_OFF(i));
228
229 size += cs->size;
230 }
231
232 /* Round up 'size' to the nearest power of two. */
233 if ((size & (size - 1)) != 0)
234 size = 1 << fls(size);
235
236 /* Setup BAR[1] to all DRAM banks. */
237 mvebu_writel(port, dram->cs[0].base, PCIE_BAR_LO_OFF(1));
238 mvebu_writel(port, 0, PCIE_BAR_HI_OFF(1));
239 mvebu_writel(port, ((size - 1) & 0xffff0000) | 1,
240 PCIE_BAR_CTRL_OFF(1));
241
242 /*
243 * Point BAR[0] to the device's internal registers.
244 */
245 mvebu_writel(port, round_down(port->regs.start, SZ_1M), PCIE_BAR_LO_OFF(0));
246 mvebu_writel(port, 0, PCIE_BAR_HI_OFF(0));
247 }
248
mvebu_pcie_setup_hw(struct mvebu_pcie_port * port)249 static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port)
250 {
251 u32 ctrl, lnkcap, cmd, dev_rev, unmask, sspl;
252
253 /* Setup PCIe controller to Root Complex mode. */
254 ctrl = mvebu_readl(port, PCIE_CTRL_OFF);
255 ctrl |= PCIE_CTRL_RC_MODE;
256 mvebu_writel(port, ctrl, PCIE_CTRL_OFF);
257
258 /*
259 * Set Maximum Link Width to X1 or X4 in Root Port's PCIe Link
260 * Capability register. This register is defined by PCIe specification
261 * as read-only but this mvebu controller has it as read-write and must
262 * be set to number of SerDes PCIe lanes (1 or 4). If this register is
263 * not set correctly then link with endpoint card is not established.
264 */
265 lnkcap = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_LNKCAP);
266 lnkcap &= ~PCI_EXP_LNKCAP_MLW;
267 lnkcap |= FIELD_PREP(PCI_EXP_LNKCAP_MLW, port->is_x4 ? 4 : 1);
268 mvebu_writel(port, lnkcap, PCIE_CAP_PCIEXP + PCI_EXP_LNKCAP);
269
270 /* Disable Root Bridge I/O space, memory space and bus mastering. */
271 cmd = mvebu_readl(port, PCIE_CMD_OFF);
272 cmd &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
273 mvebu_writel(port, cmd, PCIE_CMD_OFF);
274
275 /*
276 * Change Class Code of PCI Bridge device to PCI Bridge (0x6004)
277 * because default value is Memory controller (0x5080).
278 *
279 * Note that this mvebu PCI Bridge does not have compliant Type 1
280 * Configuration Space. Header Type is reported as Type 0 and it
281 * has format of Type 0 config space.
282 *
283 * Moreover Type 0 BAR registers (ranges 0x10 - 0x28 and 0x30 - 0x34)
284 * have the same format in Marvell's specification as in PCIe
285 * specification, but their meaning is totally different and they do
286 * different things: they are aliased into internal mvebu registers
287 * (e.g. PCIE_BAR_LO_OFF) and these should not be changed or
288 * reconfigured by pci device drivers.
289 *
290 * Therefore driver uses emulation of PCI Bridge which emulates
291 * access to configuration space via internal mvebu registers or
292 * emulated configuration buffer. Driver access these PCI Bridge
293 * directly for simplification, but these registers can be accessed
294 * also via standard mvebu way for accessing PCI config space.
295 */
296 dev_rev = mvebu_readl(port, PCIE_DEV_REV_OFF);
297 dev_rev &= ~0xffffff00;
298 dev_rev |= PCI_CLASS_BRIDGE_PCI_NORMAL << 8;
299 mvebu_writel(port, dev_rev, PCIE_DEV_REV_OFF);
300
301 /* Point PCIe unit MBUS decode windows to DRAM space. */
302 mvebu_pcie_setup_wins(port);
303
304 /*
305 * Program Root Port to automatically send Set_Slot_Power_Limit
306 * PCIe Message when changing status from Dl_Down to Dl_Up and valid
307 * slot power limit was specified.
308 */
309 sspl = mvebu_readl(port, PCIE_SSPL_OFF);
310 sspl &= ~(PCIE_SSPL_VALUE_MASK | PCIE_SSPL_SCALE_MASK | PCIE_SSPL_ENABLE);
311 if (port->slot_power_limit_value) {
312 sspl |= port->slot_power_limit_value << PCIE_SSPL_VALUE_SHIFT;
313 sspl |= port->slot_power_limit_scale << PCIE_SSPL_SCALE_SHIFT;
314 sspl |= PCIE_SSPL_ENABLE;
315 }
316 mvebu_writel(port, sspl, PCIE_SSPL_OFF);
317
318 /* Mask all interrupt sources. */
319 mvebu_writel(port, ~PCIE_INT_ALL_MASK, PCIE_INT_UNMASK_OFF);
320
321 /* Clear all interrupt causes. */
322 mvebu_writel(port, ~PCIE_INT_ALL_MASK, PCIE_INT_CAUSE_OFF);
323
324 /* Check if "intx" interrupt was specified in DT. */
325 if (port->intx_irq > 0)
326 return;
327
328 /*
329 * Fallback code when "intx" interrupt was not specified in DT:
330 * Unmask all legacy INTx interrupts as driver does not provide a way
331 * for masking and unmasking of individual legacy INTx interrupts.
332 * Legacy INTx are reported via one shared GIC source and therefore
333 * kernel cannot distinguish which individual legacy INTx was triggered.
334 * These interrupts are shared, so it should not cause any issue. Just
335 * performance penalty as every PCIe interrupt handler needs to be
336 * called when some interrupt is triggered.
337 */
338 unmask = mvebu_readl(port, PCIE_INT_UNMASK_OFF);
339 unmask |= PCIE_INT_INTX(0) | PCIE_INT_INTX(1) |
340 PCIE_INT_INTX(2) | PCIE_INT_INTX(3);
341 mvebu_writel(port, unmask, PCIE_INT_UNMASK_OFF);
342 }
343
344 static struct mvebu_pcie_port *mvebu_pcie_find_port(struct mvebu_pcie *pcie,
345 struct pci_bus *bus,
346 int devfn);
347
mvebu_pcie_child_rd_conf(struct pci_bus * bus,u32 devfn,int where,int size,u32 * val)348 static int mvebu_pcie_child_rd_conf(struct pci_bus *bus, u32 devfn, int where,
349 int size, u32 *val)
350 {
351 struct mvebu_pcie *pcie = bus->sysdata;
352 struct mvebu_pcie_port *port;
353 void __iomem *conf_data;
354
355 port = mvebu_pcie_find_port(pcie, bus, devfn);
356 if (!port)
357 return PCIBIOS_DEVICE_NOT_FOUND;
358
359 if (!mvebu_pcie_link_up(port))
360 return PCIBIOS_DEVICE_NOT_FOUND;
361
362 conf_data = port->base + PCIE_CONF_DATA_OFF;
363
364 mvebu_writel(port, PCIE_CONF_ADDR(bus->number, devfn, where),
365 PCIE_CONF_ADDR_OFF);
366
367 switch (size) {
368 case 1:
369 *val = readb_relaxed(conf_data + (where & 3));
370 break;
371 case 2:
372 *val = readw_relaxed(conf_data + (where & 2));
373 break;
374 case 4:
375 *val = readl_relaxed(conf_data);
376 break;
377 default:
378 return PCIBIOS_BAD_REGISTER_NUMBER;
379 }
380
381 return PCIBIOS_SUCCESSFUL;
382 }
383
mvebu_pcie_child_wr_conf(struct pci_bus * bus,u32 devfn,int where,int size,u32 val)384 static int mvebu_pcie_child_wr_conf(struct pci_bus *bus, u32 devfn,
385 int where, int size, u32 val)
386 {
387 struct mvebu_pcie *pcie = bus->sysdata;
388 struct mvebu_pcie_port *port;
389 void __iomem *conf_data;
390
391 port = mvebu_pcie_find_port(pcie, bus, devfn);
392 if (!port)
393 return PCIBIOS_DEVICE_NOT_FOUND;
394
395 if (!mvebu_pcie_link_up(port))
396 return PCIBIOS_DEVICE_NOT_FOUND;
397
398 conf_data = port->base + PCIE_CONF_DATA_OFF;
399
400 mvebu_writel(port, PCIE_CONF_ADDR(bus->number, devfn, where),
401 PCIE_CONF_ADDR_OFF);
402
403 switch (size) {
404 case 1:
405 writeb(val, conf_data + (where & 3));
406 break;
407 case 2:
408 writew(val, conf_data + (where & 2));
409 break;
410 case 4:
411 writel(val, conf_data);
412 break;
413 default:
414 return PCIBIOS_BAD_REGISTER_NUMBER;
415 }
416
417 return PCIBIOS_SUCCESSFUL;
418 }
419
420 static struct pci_ops mvebu_pcie_child_ops = {
421 .read = mvebu_pcie_child_rd_conf,
422 .write = mvebu_pcie_child_wr_conf,
423 };
424
425 /*
426 * Remove windows, starting from the largest ones to the smallest
427 * ones.
428 */
mvebu_pcie_del_windows(struct mvebu_pcie_port * port,phys_addr_t base,size_t size)429 static void mvebu_pcie_del_windows(struct mvebu_pcie_port *port,
430 phys_addr_t base, size_t size)
431 {
432 while (size) {
433 size_t sz = 1 << (fls(size) - 1);
434
435 mvebu_mbus_del_window(base, sz);
436 base += sz;
437 size -= sz;
438 }
439 }
440
441 /*
442 * MBus windows can only have a power of two size, but PCI BARs do not
443 * have this constraint. Therefore, we have to split the PCI BAR into
444 * areas each having a power of two size. We start from the largest
445 * one (i.e highest order bit set in the size).
446 */
mvebu_pcie_add_windows(struct mvebu_pcie_port * port,unsigned int target,unsigned int attribute,phys_addr_t base,size_t size,phys_addr_t remap)447 static int mvebu_pcie_add_windows(struct mvebu_pcie_port *port,
448 unsigned int target, unsigned int attribute,
449 phys_addr_t base, size_t size,
450 phys_addr_t remap)
451 {
452 size_t size_mapped = 0;
453
454 while (size) {
455 size_t sz = 1 << (fls(size) - 1);
456 int ret;
457
458 ret = mvebu_mbus_add_window_remap_by_id(target, attribute, base,
459 sz, remap);
460 if (ret) {
461 phys_addr_t end = base + sz - 1;
462
463 dev_err(&port->pcie->pdev->dev,
464 "Could not create MBus window at [mem %pa-%pa]: %d\n",
465 &base, &end, ret);
466 mvebu_pcie_del_windows(port, base - size_mapped,
467 size_mapped);
468 return ret;
469 }
470
471 size -= sz;
472 size_mapped += sz;
473 base += sz;
474 if (remap != MVEBU_MBUS_NO_REMAP)
475 remap += sz;
476 }
477
478 return 0;
479 }
480
mvebu_pcie_set_window(struct mvebu_pcie_port * port,unsigned int target,unsigned int attribute,const struct mvebu_pcie_window * desired,struct mvebu_pcie_window * cur)481 static int mvebu_pcie_set_window(struct mvebu_pcie_port *port,
482 unsigned int target, unsigned int attribute,
483 const struct mvebu_pcie_window *desired,
484 struct mvebu_pcie_window *cur)
485 {
486 int ret;
487
488 if (desired->base == cur->base && desired->remap == cur->remap &&
489 desired->size == cur->size)
490 return 0;
491
492 if (cur->size != 0) {
493 mvebu_pcie_del_windows(port, cur->base, cur->size);
494 cur->size = 0;
495 cur->base = 0;
496
497 /*
498 * If something tries to change the window while it is enabled
499 * the change will not be done atomically. That would be
500 * difficult to do in the general case.
501 */
502 }
503
504 if (desired->size == 0)
505 return 0;
506
507 ret = mvebu_pcie_add_windows(port, target, attribute, desired->base,
508 desired->size, desired->remap);
509 if (ret) {
510 cur->size = 0;
511 cur->base = 0;
512 return ret;
513 }
514
515 *cur = *desired;
516 return 0;
517 }
518
mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port * port)519 static int mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port)
520 {
521 struct mvebu_pcie_window desired = {};
522 struct pci_bridge_emul_conf *conf = &port->bridge.conf;
523
524 /* Are the new iobase/iolimit values invalid? */
525 if (conf->iolimit < conf->iobase ||
526 le16_to_cpu(conf->iolimitupper) < le16_to_cpu(conf->iobaseupper))
527 return mvebu_pcie_set_window(port, port->io_target, port->io_attr,
528 &desired, &port->iowin);
529
530 /*
531 * We read the PCI-to-PCI bridge emulated registers, and
532 * calculate the base address and size of the address decoding
533 * window to setup, according to the PCI-to-PCI bridge
534 * specifications. iobase is the bus address, port->iowin_base
535 * is the CPU address.
536 */
537 desired.remap = ((conf->iobase & 0xF0) << 8) |
538 (le16_to_cpu(conf->iobaseupper) << 16);
539 desired.base = port->pcie->io.start + desired.remap;
540 desired.size = ((0xFFF | ((conf->iolimit & 0xF0) << 8) |
541 (le16_to_cpu(conf->iolimitupper) << 16)) -
542 desired.remap) +
543 1;
544
545 return mvebu_pcie_set_window(port, port->io_target, port->io_attr, &desired,
546 &port->iowin);
547 }
548
mvebu_pcie_handle_membase_change(struct mvebu_pcie_port * port)549 static int mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port)
550 {
551 struct mvebu_pcie_window desired = {.remap = MVEBU_MBUS_NO_REMAP};
552 struct pci_bridge_emul_conf *conf = &port->bridge.conf;
553
554 /* Are the new membase/memlimit values invalid? */
555 if (le16_to_cpu(conf->memlimit) < le16_to_cpu(conf->membase))
556 return mvebu_pcie_set_window(port, port->mem_target, port->mem_attr,
557 &desired, &port->memwin);
558
559 /*
560 * We read the PCI-to-PCI bridge emulated registers, and
561 * calculate the base address and size of the address decoding
562 * window to setup, according to the PCI-to-PCI bridge
563 * specifications.
564 */
565 desired.base = ((le16_to_cpu(conf->membase) & 0xFFF0) << 16);
566 desired.size = (((le16_to_cpu(conf->memlimit) & 0xFFF0) << 16) | 0xFFFFF) -
567 desired.base + 1;
568
569 return mvebu_pcie_set_window(port, port->mem_target, port->mem_attr, &desired,
570 &port->memwin);
571 }
572
573 static pci_bridge_emul_read_status_t
mvebu_pci_bridge_emul_base_conf_read(struct pci_bridge_emul * bridge,int reg,u32 * value)574 mvebu_pci_bridge_emul_base_conf_read(struct pci_bridge_emul *bridge,
575 int reg, u32 *value)
576 {
577 struct mvebu_pcie_port *port = bridge->data;
578
579 switch (reg) {
580 case PCI_COMMAND:
581 *value = mvebu_readl(port, PCIE_CMD_OFF);
582 break;
583
584 case PCI_PRIMARY_BUS: {
585 /*
586 * From the whole 32bit register we support reading from HW only
587 * secondary bus number which is mvebu local bus number.
588 * Other bits are retrieved only from emulated config buffer.
589 */
590 __le32 *cfgspace = (__le32 *)&bridge->conf;
591 u32 val = le32_to_cpu(cfgspace[PCI_PRIMARY_BUS / 4]);
592 val &= ~0xff00;
593 val |= mvebu_pcie_get_local_bus_nr(port) << 8;
594 *value = val;
595 break;
596 }
597
598 case PCI_INTERRUPT_LINE: {
599 /*
600 * From the whole 32bit register we support reading from HW only
601 * one bit: PCI_BRIDGE_CTL_BUS_RESET.
602 * Other bits are retrieved only from emulated config buffer.
603 */
604 __le32 *cfgspace = (__le32 *)&bridge->conf;
605 u32 val = le32_to_cpu(cfgspace[PCI_INTERRUPT_LINE / 4]);
606 if (mvebu_readl(port, PCIE_CTRL_OFF) & PCIE_CTRL_MASTER_HOT_RESET)
607 val |= PCI_BRIDGE_CTL_BUS_RESET << 16;
608 else
609 val &= ~(PCI_BRIDGE_CTL_BUS_RESET << 16);
610 *value = val;
611 break;
612 }
613
614 default:
615 return PCI_BRIDGE_EMUL_NOT_HANDLED;
616 }
617
618 return PCI_BRIDGE_EMUL_HANDLED;
619 }
620
621 static pci_bridge_emul_read_status_t
mvebu_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul * bridge,int reg,u32 * value)622 mvebu_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul *bridge,
623 int reg, u32 *value)
624 {
625 struct mvebu_pcie_port *port = bridge->data;
626
627 switch (reg) {
628 case PCI_EXP_DEVCAP:
629 *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_DEVCAP);
630 break;
631
632 case PCI_EXP_DEVCTL:
633 *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_DEVCTL);
634 break;
635
636 case PCI_EXP_LNKCAP:
637 /*
638 * PCIe requires that the Clock Power Management capability bit
639 * is hard-wired to zero for downstream ports but HW returns 1.
640 * Additionally enable Data Link Layer Link Active Reporting
641 * Capable bit as DL_Active indication is provided too.
642 */
643 *value = (mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_LNKCAP) &
644 ~PCI_EXP_LNKCAP_CLKPM) | PCI_EXP_LNKCAP_DLLLARC;
645 break;
646
647 case PCI_EXP_LNKCTL:
648 /* DL_Active indication is provided via PCIE_STAT_OFF */
649 *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL) |
650 (mvebu_pcie_link_up(port) ?
651 (PCI_EXP_LNKSTA_DLLLA << 16) : 0);
652 break;
653
654 case PCI_EXP_SLTCTL: {
655 u16 slotctl = le16_to_cpu(bridge->pcie_conf.slotctl);
656 u16 slotsta = le16_to_cpu(bridge->pcie_conf.slotsta);
657 u32 val = 0;
658 /*
659 * When slot power limit was not specified in DT then
660 * ASPL_DISABLE bit is stored only in emulated config space.
661 * Otherwise reflect status of PCIE_SSPL_ENABLE bit in HW.
662 */
663 if (!port->slot_power_limit_value)
664 val |= slotctl & PCI_EXP_SLTCTL_ASPL_DISABLE;
665 else if (!(mvebu_readl(port, PCIE_SSPL_OFF) & PCIE_SSPL_ENABLE))
666 val |= PCI_EXP_SLTCTL_ASPL_DISABLE;
667 /* This callback is 32-bit and in high bits is slot status. */
668 val |= slotsta << 16;
669 *value = val;
670 break;
671 }
672
673 case PCI_EXP_RTSTA:
674 *value = mvebu_readl(port, PCIE_RC_RTSTA);
675 break;
676
677 case PCI_EXP_DEVCAP2:
678 *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_DEVCAP2);
679 break;
680
681 case PCI_EXP_DEVCTL2:
682 *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_DEVCTL2);
683 break;
684
685 case PCI_EXP_LNKCTL2:
686 *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL2);
687 break;
688
689 default:
690 return PCI_BRIDGE_EMUL_NOT_HANDLED;
691 }
692
693 return PCI_BRIDGE_EMUL_HANDLED;
694 }
695
696 static pci_bridge_emul_read_status_t
mvebu_pci_bridge_emul_ext_conf_read(struct pci_bridge_emul * bridge,int reg,u32 * value)697 mvebu_pci_bridge_emul_ext_conf_read(struct pci_bridge_emul *bridge,
698 int reg, u32 *value)
699 {
700 struct mvebu_pcie_port *port = bridge->data;
701
702 switch (reg) {
703 case 0:
704 case PCI_ERR_UNCOR_STATUS:
705 case PCI_ERR_UNCOR_MASK:
706 case PCI_ERR_UNCOR_SEVER:
707 case PCI_ERR_COR_STATUS:
708 case PCI_ERR_COR_MASK:
709 case PCI_ERR_CAP:
710 case PCI_ERR_HEADER_LOG+0:
711 case PCI_ERR_HEADER_LOG+4:
712 case PCI_ERR_HEADER_LOG+8:
713 case PCI_ERR_HEADER_LOG+12:
714 case PCI_ERR_ROOT_COMMAND:
715 case PCI_ERR_ROOT_STATUS:
716 case PCI_ERR_ROOT_ERR_SRC:
717 *value = mvebu_readl(port, PCIE_CAP_PCIERR_OFF + reg);
718 break;
719
720 default:
721 return PCI_BRIDGE_EMUL_NOT_HANDLED;
722 }
723
724 return PCI_BRIDGE_EMUL_HANDLED;
725 }
726
727 static void
mvebu_pci_bridge_emul_base_conf_write(struct pci_bridge_emul * bridge,int reg,u32 old,u32 new,u32 mask)728 mvebu_pci_bridge_emul_base_conf_write(struct pci_bridge_emul *bridge,
729 int reg, u32 old, u32 new, u32 mask)
730 {
731 struct mvebu_pcie_port *port = bridge->data;
732 struct pci_bridge_emul_conf *conf = &bridge->conf;
733
734 switch (reg) {
735 case PCI_COMMAND:
736 mvebu_writel(port, new, PCIE_CMD_OFF);
737 break;
738
739 case PCI_IO_BASE:
740 if ((mask & 0xffff) && mvebu_has_ioport(port) &&
741 mvebu_pcie_handle_iobase_change(port)) {
742 /* On error disable IO range */
743 conf->iobase &= ~0xf0;
744 conf->iolimit &= ~0xf0;
745 conf->iobase |= 0xf0;
746 conf->iobaseupper = cpu_to_le16(0x0000);
747 conf->iolimitupper = cpu_to_le16(0x0000);
748 }
749 break;
750
751 case PCI_MEMORY_BASE:
752 if (mvebu_pcie_handle_membase_change(port)) {
753 /* On error disable mem range */
754 conf->membase = cpu_to_le16(le16_to_cpu(conf->membase) & ~0xfff0);
755 conf->memlimit = cpu_to_le16(le16_to_cpu(conf->memlimit) & ~0xfff0);
756 conf->membase = cpu_to_le16(le16_to_cpu(conf->membase) | 0xfff0);
757 }
758 break;
759
760 case PCI_IO_BASE_UPPER16:
761 if (mvebu_has_ioport(port) &&
762 mvebu_pcie_handle_iobase_change(port)) {
763 /* On error disable IO range */
764 conf->iobase &= ~0xf0;
765 conf->iolimit &= ~0xf0;
766 conf->iobase |= 0xf0;
767 conf->iobaseupper = cpu_to_le16(0x0000);
768 conf->iolimitupper = cpu_to_le16(0x0000);
769 }
770 break;
771
772 case PCI_PRIMARY_BUS:
773 if (mask & 0xff00)
774 mvebu_pcie_set_local_bus_nr(port, conf->secondary_bus);
775 break;
776
777 case PCI_INTERRUPT_LINE:
778 if (mask & (PCI_BRIDGE_CTL_BUS_RESET << 16)) {
779 u32 ctrl = mvebu_readl(port, PCIE_CTRL_OFF);
780 if (new & (PCI_BRIDGE_CTL_BUS_RESET << 16))
781 ctrl |= PCIE_CTRL_MASTER_HOT_RESET;
782 else
783 ctrl &= ~PCIE_CTRL_MASTER_HOT_RESET;
784 mvebu_writel(port, ctrl, PCIE_CTRL_OFF);
785 }
786 break;
787
788 default:
789 break;
790 }
791 }
792
793 static void
mvebu_pci_bridge_emul_pcie_conf_write(struct pci_bridge_emul * bridge,int reg,u32 old,u32 new,u32 mask)794 mvebu_pci_bridge_emul_pcie_conf_write(struct pci_bridge_emul *bridge,
795 int reg, u32 old, u32 new, u32 mask)
796 {
797 struct mvebu_pcie_port *port = bridge->data;
798
799 switch (reg) {
800 case PCI_EXP_DEVCTL:
801 mvebu_writel(port, new, PCIE_CAP_PCIEXP + PCI_EXP_DEVCTL);
802 break;
803
804 case PCI_EXP_LNKCTL:
805 /*
806 * PCIe requires that the Enable Clock Power Management bit
807 * is hard-wired to zero for downstream ports but HW allows
808 * to change it.
809 */
810 new &= ~PCI_EXP_LNKCTL_CLKREQ_EN;
811
812 mvebu_writel(port, new, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL);
813 break;
814
815 case PCI_EXP_SLTCTL:
816 /*
817 * Allow to change PCIE_SSPL_ENABLE bit only when slot power
818 * limit was specified in DT and configured into HW.
819 */
820 if ((mask & PCI_EXP_SLTCTL_ASPL_DISABLE) &&
821 port->slot_power_limit_value) {
822 u32 sspl = mvebu_readl(port, PCIE_SSPL_OFF);
823 if (new & PCI_EXP_SLTCTL_ASPL_DISABLE)
824 sspl &= ~PCIE_SSPL_ENABLE;
825 else
826 sspl |= PCIE_SSPL_ENABLE;
827 mvebu_writel(port, sspl, PCIE_SSPL_OFF);
828 }
829 break;
830
831 case PCI_EXP_RTSTA:
832 /*
833 * PME Status bit in Root Status Register (PCIE_RC_RTSTA)
834 * is read-only and can be cleared only by writing 0b to the
835 * Interrupt Cause RW0C register (PCIE_INT_CAUSE_OFF). So
836 * clear PME via Interrupt Cause.
837 */
838 if (new & PCI_EXP_RTSTA_PME)
839 mvebu_writel(port, ~PCIE_INT_PM_PME, PCIE_INT_CAUSE_OFF);
840 break;
841
842 case PCI_EXP_DEVCTL2:
843 mvebu_writel(port, new, PCIE_CAP_PCIEXP + PCI_EXP_DEVCTL2);
844 break;
845
846 case PCI_EXP_LNKCTL2:
847 mvebu_writel(port, new, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL2);
848 break;
849
850 default:
851 break;
852 }
853 }
854
855 static void
mvebu_pci_bridge_emul_ext_conf_write(struct pci_bridge_emul * bridge,int reg,u32 old,u32 new,u32 mask)856 mvebu_pci_bridge_emul_ext_conf_write(struct pci_bridge_emul *bridge,
857 int reg, u32 old, u32 new, u32 mask)
858 {
859 struct mvebu_pcie_port *port = bridge->data;
860
861 switch (reg) {
862 /* These are W1C registers, so clear other bits */
863 case PCI_ERR_UNCOR_STATUS:
864 case PCI_ERR_COR_STATUS:
865 case PCI_ERR_ROOT_STATUS:
866 new &= mask;
867 fallthrough;
868
869 case PCI_ERR_UNCOR_MASK:
870 case PCI_ERR_UNCOR_SEVER:
871 case PCI_ERR_COR_MASK:
872 case PCI_ERR_CAP:
873 case PCI_ERR_HEADER_LOG+0:
874 case PCI_ERR_HEADER_LOG+4:
875 case PCI_ERR_HEADER_LOG+8:
876 case PCI_ERR_HEADER_LOG+12:
877 case PCI_ERR_ROOT_COMMAND:
878 case PCI_ERR_ROOT_ERR_SRC:
879 mvebu_writel(port, new, PCIE_CAP_PCIERR_OFF + reg);
880 break;
881
882 default:
883 break;
884 }
885 }
886
887 static const struct pci_bridge_emul_ops mvebu_pci_bridge_emul_ops = {
888 .read_base = mvebu_pci_bridge_emul_base_conf_read,
889 .write_base = mvebu_pci_bridge_emul_base_conf_write,
890 .read_pcie = mvebu_pci_bridge_emul_pcie_conf_read,
891 .write_pcie = mvebu_pci_bridge_emul_pcie_conf_write,
892 .read_ext = mvebu_pci_bridge_emul_ext_conf_read,
893 .write_ext = mvebu_pci_bridge_emul_ext_conf_write,
894 };
895
896 /*
897 * Initialize the configuration space of the PCI-to-PCI bridge
898 * associated with the given PCIe interface.
899 */
mvebu_pci_bridge_emul_init(struct mvebu_pcie_port * port)900 static int mvebu_pci_bridge_emul_init(struct mvebu_pcie_port *port)
901 {
902 unsigned int bridge_flags = PCI_BRIDGE_EMUL_NO_PREFMEM_FORWARD;
903 struct pci_bridge_emul *bridge = &port->bridge;
904 u32 dev_id = mvebu_readl(port, PCIE_DEV_ID_OFF);
905 u32 dev_rev = mvebu_readl(port, PCIE_DEV_REV_OFF);
906 u32 ssdev_id = mvebu_readl(port, PCIE_SSDEV_ID_OFF);
907 u32 pcie_cap = mvebu_readl(port, PCIE_CAP_PCIEXP);
908 u8 pcie_cap_ver = ((pcie_cap >> 16) & PCI_EXP_FLAGS_VERS);
909
910 bridge->conf.vendor = cpu_to_le16(dev_id & 0xffff);
911 bridge->conf.device = cpu_to_le16(dev_id >> 16);
912 bridge->conf.class_revision = cpu_to_le32(dev_rev & 0xff);
913
914 if (mvebu_has_ioport(port)) {
915 /* We support 32 bits I/O addressing */
916 bridge->conf.iobase = PCI_IO_RANGE_TYPE_32;
917 bridge->conf.iolimit = PCI_IO_RANGE_TYPE_32;
918 } else {
919 bridge_flags |= PCI_BRIDGE_EMUL_NO_IO_FORWARD;
920 }
921
922 /*
923 * Older mvebu hardware provides PCIe Capability structure only in
924 * version 1. New hardware provides it in version 2.
925 * Enable slot support which is emulated.
926 */
927 bridge->pcie_conf.cap = cpu_to_le16(pcie_cap_ver | PCI_EXP_FLAGS_SLOT);
928
929 /*
930 * Set Presence Detect State bit permanently as there is no support for
931 * unplugging PCIe card from the slot. Assume that PCIe card is always
932 * connected in slot.
933 *
934 * Set physical slot number to port+1 as mvebu ports are indexed from
935 * zero and zero value is reserved for ports within the same silicon
936 * as Root Port which is not mvebu case.
937 *
938 * Also set correct slot power limit.
939 */
940 bridge->pcie_conf.slotcap = cpu_to_le32(
941 FIELD_PREP(PCI_EXP_SLTCAP_SPLV, port->slot_power_limit_value) |
942 FIELD_PREP(PCI_EXP_SLTCAP_SPLS, port->slot_power_limit_scale) |
943 FIELD_PREP(PCI_EXP_SLTCAP_PSN, port->port+1));
944 bridge->pcie_conf.slotsta = cpu_to_le16(PCI_EXP_SLTSTA_PDS);
945
946 bridge->subsystem_vendor_id = ssdev_id & 0xffff;
947 bridge->subsystem_id = ssdev_id >> 16;
948 bridge->has_pcie = true;
949 bridge->pcie_start = PCIE_CAP_PCIEXP;
950 bridge->data = port;
951 bridge->ops = &mvebu_pci_bridge_emul_ops;
952
953 return pci_bridge_emul_init(bridge, bridge_flags);
954 }
955
sys_to_pcie(struct pci_sys_data * sys)956 static inline struct mvebu_pcie *sys_to_pcie(struct pci_sys_data *sys)
957 {
958 return sys->private_data;
959 }
960
mvebu_pcie_find_port(struct mvebu_pcie * pcie,struct pci_bus * bus,int devfn)961 static struct mvebu_pcie_port *mvebu_pcie_find_port(struct mvebu_pcie *pcie,
962 struct pci_bus *bus,
963 int devfn)
964 {
965 int i;
966
967 for (i = 0; i < pcie->nports; i++) {
968 struct mvebu_pcie_port *port = &pcie->ports[i];
969
970 if (!port->base)
971 continue;
972
973 if (bus->number == 0 && port->devfn == devfn)
974 return port;
975 if (bus->number != 0 &&
976 bus->number >= port->bridge.conf.secondary_bus &&
977 bus->number <= port->bridge.conf.subordinate_bus)
978 return port;
979 }
980
981 return NULL;
982 }
983
984 /* PCI configuration space write function */
mvebu_pcie_wr_conf(struct pci_bus * bus,u32 devfn,int where,int size,u32 val)985 static int mvebu_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
986 int where, int size, u32 val)
987 {
988 struct mvebu_pcie *pcie = bus->sysdata;
989 struct mvebu_pcie_port *port;
990
991 port = mvebu_pcie_find_port(pcie, bus, devfn);
992 if (!port)
993 return PCIBIOS_DEVICE_NOT_FOUND;
994
995 return pci_bridge_emul_conf_write(&port->bridge, where, size, val);
996 }
997
998 /* PCI configuration space read function */
mvebu_pcie_rd_conf(struct pci_bus * bus,u32 devfn,int where,int size,u32 * val)999 static int mvebu_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
1000 int size, u32 *val)
1001 {
1002 struct mvebu_pcie *pcie = bus->sysdata;
1003 struct mvebu_pcie_port *port;
1004
1005 port = mvebu_pcie_find_port(pcie, bus, devfn);
1006 if (!port)
1007 return PCIBIOS_DEVICE_NOT_FOUND;
1008
1009 return pci_bridge_emul_conf_read(&port->bridge, where, size, val);
1010 }
1011
1012 static struct pci_ops mvebu_pcie_ops = {
1013 .read = mvebu_pcie_rd_conf,
1014 .write = mvebu_pcie_wr_conf,
1015 };
1016
mvebu_pcie_intx_irq_mask(struct irq_data * d)1017 static void mvebu_pcie_intx_irq_mask(struct irq_data *d)
1018 {
1019 struct mvebu_pcie_port *port = d->domain->host_data;
1020 irq_hw_number_t hwirq = irqd_to_hwirq(d);
1021 unsigned long flags;
1022 u32 unmask;
1023
1024 raw_spin_lock_irqsave(&port->irq_lock, flags);
1025 unmask = mvebu_readl(port, PCIE_INT_UNMASK_OFF);
1026 unmask &= ~PCIE_INT_INTX(hwirq);
1027 mvebu_writel(port, unmask, PCIE_INT_UNMASK_OFF);
1028 raw_spin_unlock_irqrestore(&port->irq_lock, flags);
1029 }
1030
mvebu_pcie_intx_irq_unmask(struct irq_data * d)1031 static void mvebu_pcie_intx_irq_unmask(struct irq_data *d)
1032 {
1033 struct mvebu_pcie_port *port = d->domain->host_data;
1034 irq_hw_number_t hwirq = irqd_to_hwirq(d);
1035 unsigned long flags;
1036 u32 unmask;
1037
1038 raw_spin_lock_irqsave(&port->irq_lock, flags);
1039 unmask = mvebu_readl(port, PCIE_INT_UNMASK_OFF);
1040 unmask |= PCIE_INT_INTX(hwirq);
1041 mvebu_writel(port, unmask, PCIE_INT_UNMASK_OFF);
1042 raw_spin_unlock_irqrestore(&port->irq_lock, flags);
1043 }
1044
1045 static struct irq_chip intx_irq_chip = {
1046 .name = "mvebu-INTx",
1047 .irq_mask = mvebu_pcie_intx_irq_mask,
1048 .irq_unmask = mvebu_pcie_intx_irq_unmask,
1049 };
1050
mvebu_pcie_intx_irq_map(struct irq_domain * h,unsigned int virq,irq_hw_number_t hwirq)1051 static int mvebu_pcie_intx_irq_map(struct irq_domain *h,
1052 unsigned int virq, irq_hw_number_t hwirq)
1053 {
1054 struct mvebu_pcie_port *port = h->host_data;
1055
1056 irq_set_status_flags(virq, IRQ_LEVEL);
1057 irq_set_chip_and_handler(virq, &intx_irq_chip, handle_level_irq);
1058 irq_set_chip_data(virq, port);
1059
1060 return 0;
1061 }
1062
1063 static const struct irq_domain_ops mvebu_pcie_intx_irq_domain_ops = {
1064 .map = mvebu_pcie_intx_irq_map,
1065 .xlate = irq_domain_xlate_onecell,
1066 };
1067
mvebu_pcie_init_irq_domain(struct mvebu_pcie_port * port)1068 static int mvebu_pcie_init_irq_domain(struct mvebu_pcie_port *port)
1069 {
1070 struct device *dev = &port->pcie->pdev->dev;
1071 struct device_node *pcie_intc_node;
1072
1073 raw_spin_lock_init(&port->irq_lock);
1074
1075 pcie_intc_node = of_get_next_child(port->dn, NULL);
1076 if (!pcie_intc_node) {
1077 dev_err(dev, "No PCIe Intc node found for %s\n", port->name);
1078 return -ENODEV;
1079 }
1080
1081 port->intx_irq_domain = irq_domain_add_linear(pcie_intc_node, PCI_NUM_INTX,
1082 &mvebu_pcie_intx_irq_domain_ops,
1083 port);
1084 of_node_put(pcie_intc_node);
1085 if (!port->intx_irq_domain) {
1086 dev_err(dev, "Failed to get INTx IRQ domain for %s\n", port->name);
1087 return -ENOMEM;
1088 }
1089
1090 return 0;
1091 }
1092
mvebu_pcie_irq_handler(struct irq_desc * desc)1093 static void mvebu_pcie_irq_handler(struct irq_desc *desc)
1094 {
1095 struct mvebu_pcie_port *port = irq_desc_get_handler_data(desc);
1096 struct irq_chip *chip = irq_desc_get_chip(desc);
1097 struct device *dev = &port->pcie->pdev->dev;
1098 u32 cause, unmask, status;
1099 int i;
1100
1101 chained_irq_enter(chip, desc);
1102
1103 cause = mvebu_readl(port, PCIE_INT_CAUSE_OFF);
1104 unmask = mvebu_readl(port, PCIE_INT_UNMASK_OFF);
1105 status = cause & unmask;
1106
1107 /* Process legacy INTx interrupts */
1108 for (i = 0; i < PCI_NUM_INTX; i++) {
1109 if (!(status & PCIE_INT_INTX(i)))
1110 continue;
1111
1112 if (generic_handle_domain_irq(port->intx_irq_domain, i) == -EINVAL)
1113 dev_err_ratelimited(dev, "unexpected INT%c IRQ\n", (char)i+'A');
1114 }
1115
1116 chained_irq_exit(chip, desc);
1117 }
1118
mvebu_pcie_map_irq(const struct pci_dev * dev,u8 slot,u8 pin)1119 static int mvebu_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
1120 {
1121 /* Interrupt support on mvebu emulated bridges is not implemented yet */
1122 if (dev->bus->number == 0)
1123 return 0; /* Proper return code 0 == NO_IRQ */
1124
1125 return of_irq_parse_and_map_pci(dev, slot, pin);
1126 }
1127
mvebu_pcie_align_resource(struct pci_dev * dev,const struct resource * res,resource_size_t start,resource_size_t size,resource_size_t align)1128 static resource_size_t mvebu_pcie_align_resource(struct pci_dev *dev,
1129 const struct resource *res,
1130 resource_size_t start,
1131 resource_size_t size,
1132 resource_size_t align)
1133 {
1134 if (dev->bus->number != 0)
1135 return start;
1136
1137 /*
1138 * On the PCI-to-PCI bridge side, the I/O windows must have at
1139 * least a 64 KB size and the memory windows must have at
1140 * least a 1 MB size. Moreover, MBus windows need to have a
1141 * base address aligned on their size, and their size must be
1142 * a power of two. This means that if the BAR doesn't have a
1143 * power of two size, several MBus windows will actually be
1144 * created. We need to ensure that the biggest MBus window
1145 * (which will be the first one) is aligned on its size, which
1146 * explains the rounddown_pow_of_two() being done here.
1147 */
1148 if (res->flags & IORESOURCE_IO)
1149 return round_up(start, max_t(resource_size_t, SZ_64K,
1150 rounddown_pow_of_two(size)));
1151 else if (res->flags & IORESOURCE_MEM)
1152 return round_up(start, max_t(resource_size_t, SZ_1M,
1153 rounddown_pow_of_two(size)));
1154 else
1155 return start;
1156 }
1157
mvebu_pcie_map_registers(struct platform_device * pdev,struct device_node * np,struct mvebu_pcie_port * port)1158 static void __iomem *mvebu_pcie_map_registers(struct platform_device *pdev,
1159 struct device_node *np,
1160 struct mvebu_pcie_port *port)
1161 {
1162 int ret = 0;
1163
1164 ret = of_address_to_resource(np, 0, &port->regs);
1165 if (ret)
1166 return (void __iomem *)ERR_PTR(ret);
1167
1168 return devm_ioremap_resource(&pdev->dev, &port->regs);
1169 }
1170
1171 #define DT_FLAGS_TO_TYPE(flags) (((flags) >> 24) & 0x03)
1172 #define DT_TYPE_IO 0x1
1173 #define DT_TYPE_MEM32 0x2
1174 #define DT_CPUADDR_TO_TARGET(cpuaddr) (((cpuaddr) >> 56) & 0xFF)
1175 #define DT_CPUADDR_TO_ATTR(cpuaddr) (((cpuaddr) >> 48) & 0xFF)
1176
mvebu_get_tgt_attr(struct device_node * np,int devfn,unsigned long type,unsigned int * tgt,unsigned int * attr)1177 static int mvebu_get_tgt_attr(struct device_node *np, int devfn,
1178 unsigned long type,
1179 unsigned int *tgt,
1180 unsigned int *attr)
1181 {
1182 const int na = 3, ns = 2;
1183 const __be32 *range;
1184 int rlen, nranges, rangesz, pna, i;
1185
1186 *tgt = -1;
1187 *attr = -1;
1188
1189 range = of_get_property(np, "ranges", &rlen);
1190 if (!range)
1191 return -EINVAL;
1192
1193 pna = of_n_addr_cells(np);
1194 rangesz = pna + na + ns;
1195 nranges = rlen / sizeof(__be32) / rangesz;
1196
1197 for (i = 0; i < nranges; i++, range += rangesz) {
1198 u32 flags = of_read_number(range, 1);
1199 u32 slot = of_read_number(range + 1, 1);
1200 u64 cpuaddr = of_read_number(range + na, pna);
1201 unsigned long rtype;
1202
1203 if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_IO)
1204 rtype = IORESOURCE_IO;
1205 else if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_MEM32)
1206 rtype = IORESOURCE_MEM;
1207 else
1208 continue;
1209
1210 if (slot == PCI_SLOT(devfn) && type == rtype) {
1211 *tgt = DT_CPUADDR_TO_TARGET(cpuaddr);
1212 *attr = DT_CPUADDR_TO_ATTR(cpuaddr);
1213 return 0;
1214 }
1215 }
1216
1217 return -ENOENT;
1218 }
1219
mvebu_pcie_suspend(struct device * dev)1220 static int mvebu_pcie_suspend(struct device *dev)
1221 {
1222 struct mvebu_pcie *pcie;
1223 int i;
1224
1225 pcie = dev_get_drvdata(dev);
1226 for (i = 0; i < pcie->nports; i++) {
1227 struct mvebu_pcie_port *port = pcie->ports + i;
1228 if (!port->base)
1229 continue;
1230 port->saved_pcie_stat = mvebu_readl(port, PCIE_STAT_OFF);
1231 }
1232
1233 return 0;
1234 }
1235
mvebu_pcie_resume(struct device * dev)1236 static int mvebu_pcie_resume(struct device *dev)
1237 {
1238 struct mvebu_pcie *pcie;
1239 int i;
1240
1241 pcie = dev_get_drvdata(dev);
1242 for (i = 0; i < pcie->nports; i++) {
1243 struct mvebu_pcie_port *port = pcie->ports + i;
1244 if (!port->base)
1245 continue;
1246 mvebu_writel(port, port->saved_pcie_stat, PCIE_STAT_OFF);
1247 mvebu_pcie_setup_hw(port);
1248 }
1249
1250 return 0;
1251 }
1252
mvebu_pcie_port_clk_put(void * data)1253 static void mvebu_pcie_port_clk_put(void *data)
1254 {
1255 struct mvebu_pcie_port *port = data;
1256
1257 clk_put(port->clk);
1258 }
1259
mvebu_pcie_parse_port(struct mvebu_pcie * pcie,struct mvebu_pcie_port * port,struct device_node * child)1260 static int mvebu_pcie_parse_port(struct mvebu_pcie *pcie,
1261 struct mvebu_pcie_port *port, struct device_node *child)
1262 {
1263 struct device *dev = &pcie->pdev->dev;
1264 u32 slot_power_limit;
1265 int ret;
1266 u32 num_lanes;
1267
1268 port->pcie = pcie;
1269
1270 if (of_property_read_u32(child, "marvell,pcie-port", &port->port)) {
1271 dev_warn(dev, "ignoring %pOF, missing pcie-port property\n",
1272 child);
1273 goto skip;
1274 }
1275
1276 if (of_property_read_u32(child, "marvell,pcie-lane", &port->lane))
1277 port->lane = 0;
1278
1279 if (!of_property_read_u32(child, "num-lanes", &num_lanes) && num_lanes == 4)
1280 port->is_x4 = true;
1281
1282 port->name = devm_kasprintf(dev, GFP_KERNEL, "pcie%d.%d", port->port,
1283 port->lane);
1284 if (!port->name) {
1285 ret = -ENOMEM;
1286 goto err;
1287 }
1288
1289 port->devfn = of_pci_get_devfn(child);
1290 if (port->devfn < 0)
1291 goto skip;
1292 if (PCI_FUNC(port->devfn) != 0) {
1293 dev_err(dev, "%s: invalid function number, must be zero\n",
1294 port->name);
1295 goto skip;
1296 }
1297
1298 ret = mvebu_get_tgt_attr(dev->of_node, port->devfn, IORESOURCE_MEM,
1299 &port->mem_target, &port->mem_attr);
1300 if (ret < 0) {
1301 dev_err(dev, "%s: cannot get tgt/attr for mem window\n",
1302 port->name);
1303 goto skip;
1304 }
1305
1306 if (resource_size(&pcie->io) != 0) {
1307 mvebu_get_tgt_attr(dev->of_node, port->devfn, IORESOURCE_IO,
1308 &port->io_target, &port->io_attr);
1309 } else {
1310 port->io_target = -1;
1311 port->io_attr = -1;
1312 }
1313
1314 /*
1315 * Old DT bindings do not contain "intx" interrupt
1316 * so do not fail probing driver when interrupt does not exist.
1317 */
1318 port->intx_irq = of_irq_get_byname(child, "intx");
1319 if (port->intx_irq == -EPROBE_DEFER) {
1320 ret = port->intx_irq;
1321 goto err;
1322 }
1323 if (port->intx_irq <= 0) {
1324 dev_warn(dev, "%s: legacy INTx interrupts cannot be masked individually, "
1325 "%pOF does not contain intx interrupt\n",
1326 port->name, child);
1327 }
1328
1329 port->reset_name = devm_kasprintf(dev, GFP_KERNEL, "%s-reset",
1330 port->name);
1331 if (!port->reset_name) {
1332 ret = -ENOMEM;
1333 goto err;
1334 }
1335
1336 port->reset_gpio = devm_fwnode_gpiod_get(dev, of_fwnode_handle(child),
1337 "reset", GPIOD_OUT_HIGH,
1338 port->name);
1339 ret = PTR_ERR_OR_ZERO(port->reset_gpio);
1340 if (ret) {
1341 if (ret != -ENOENT)
1342 goto err;
1343 /* reset gpio is optional */
1344 port->reset_gpio = NULL;
1345 devm_kfree(dev, port->reset_name);
1346 port->reset_name = NULL;
1347 }
1348
1349 slot_power_limit = of_pci_get_slot_power_limit(child,
1350 &port->slot_power_limit_value,
1351 &port->slot_power_limit_scale);
1352 if (slot_power_limit)
1353 dev_info(dev, "%s: Slot power limit %u.%uW\n",
1354 port->name,
1355 slot_power_limit / 1000,
1356 (slot_power_limit / 100) % 10);
1357
1358 port->clk = of_clk_get_by_name(child, NULL);
1359 if (IS_ERR(port->clk)) {
1360 dev_err(dev, "%s: cannot get clock\n", port->name);
1361 goto skip;
1362 }
1363
1364 ret = devm_add_action(dev, mvebu_pcie_port_clk_put, port);
1365 if (ret < 0) {
1366 clk_put(port->clk);
1367 goto err;
1368 }
1369
1370 return 1;
1371
1372 skip:
1373 ret = 0;
1374
1375 /* In the case of skipping, we need to free these */
1376 devm_kfree(dev, port->reset_name);
1377 port->reset_name = NULL;
1378 devm_kfree(dev, port->name);
1379 port->name = NULL;
1380
1381 err:
1382 return ret;
1383 }
1384
1385 /*
1386 * Power up a PCIe port. PCIe requires the refclk to be stable for 100µs
1387 * prior to releasing PERST. See table 2-4 in section 2.6.2 AC Specifications
1388 * of the PCI Express Card Electromechanical Specification, 1.1.
1389 */
mvebu_pcie_powerup(struct mvebu_pcie_port * port)1390 static int mvebu_pcie_powerup(struct mvebu_pcie_port *port)
1391 {
1392 int ret;
1393
1394 ret = clk_prepare_enable(port->clk);
1395 if (ret < 0)
1396 return ret;
1397
1398 if (port->reset_gpio) {
1399 u32 reset_udelay = PCI_PM_D3COLD_WAIT * 1000;
1400
1401 of_property_read_u32(port->dn, "reset-delay-us",
1402 &reset_udelay);
1403
1404 udelay(100);
1405
1406 gpiod_set_value_cansleep(port->reset_gpio, 0);
1407 msleep(reset_udelay / 1000);
1408 }
1409
1410 return 0;
1411 }
1412
1413 /*
1414 * Power down a PCIe port. Strictly, PCIe requires us to place the card
1415 * in D3hot state before asserting PERST#.
1416 */
mvebu_pcie_powerdown(struct mvebu_pcie_port * port)1417 static void mvebu_pcie_powerdown(struct mvebu_pcie_port *port)
1418 {
1419 gpiod_set_value_cansleep(port->reset_gpio, 1);
1420
1421 clk_disable_unprepare(port->clk);
1422 }
1423
1424 /*
1425 * devm_of_pci_get_host_bridge_resources() only sets up translateable resources,
1426 * so we need extra resource setup parsing our special DT properties encoding
1427 * the MEM and IO apertures.
1428 */
mvebu_pcie_parse_request_resources(struct mvebu_pcie * pcie)1429 static int mvebu_pcie_parse_request_resources(struct mvebu_pcie *pcie)
1430 {
1431 struct device *dev = &pcie->pdev->dev;
1432 struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
1433 int ret;
1434
1435 /* Get the PCIe memory aperture */
1436 mvebu_mbus_get_pcie_mem_aperture(&pcie->mem);
1437 if (resource_size(&pcie->mem) == 0) {
1438 dev_err(dev, "invalid memory aperture size\n");
1439 return -EINVAL;
1440 }
1441
1442 pcie->mem.name = "PCI MEM";
1443 pci_add_resource(&bridge->windows, &pcie->mem);
1444 ret = devm_request_resource(dev, &iomem_resource, &pcie->mem);
1445 if (ret)
1446 return ret;
1447
1448 /* Get the PCIe IO aperture */
1449 mvebu_mbus_get_pcie_io_aperture(&pcie->io);
1450
1451 if (resource_size(&pcie->io) != 0) {
1452 pcie->realio.flags = pcie->io.flags;
1453 pcie->realio.start = PCIBIOS_MIN_IO;
1454 pcie->realio.end = min_t(resource_size_t,
1455 IO_SPACE_LIMIT - SZ_64K,
1456 resource_size(&pcie->io) - 1);
1457 pcie->realio.name = "PCI I/O";
1458
1459 ret = devm_pci_remap_iospace(dev, &pcie->realio, pcie->io.start);
1460 if (ret)
1461 return ret;
1462
1463 pci_add_resource(&bridge->windows, &pcie->realio);
1464 ret = devm_request_resource(dev, &ioport_resource, &pcie->realio);
1465 if (ret)
1466 return ret;
1467 }
1468
1469 return 0;
1470 }
1471
mvebu_pcie_probe(struct platform_device * pdev)1472 static int mvebu_pcie_probe(struct platform_device *pdev)
1473 {
1474 struct device *dev = &pdev->dev;
1475 struct mvebu_pcie *pcie;
1476 struct pci_host_bridge *bridge;
1477 struct device_node *np = dev->of_node;
1478 struct device_node *child;
1479 int num, i, ret;
1480
1481 bridge = devm_pci_alloc_host_bridge(dev, sizeof(struct mvebu_pcie));
1482 if (!bridge)
1483 return -ENOMEM;
1484
1485 pcie = pci_host_bridge_priv(bridge);
1486 pcie->pdev = pdev;
1487 platform_set_drvdata(pdev, pcie);
1488
1489 ret = mvebu_pcie_parse_request_resources(pcie);
1490 if (ret)
1491 return ret;
1492
1493 num = of_get_available_child_count(np);
1494
1495 pcie->ports = devm_kcalloc(dev, num, sizeof(*pcie->ports), GFP_KERNEL);
1496 if (!pcie->ports)
1497 return -ENOMEM;
1498
1499 i = 0;
1500 for_each_available_child_of_node(np, child) {
1501 struct mvebu_pcie_port *port = &pcie->ports[i];
1502
1503 ret = mvebu_pcie_parse_port(pcie, port, child);
1504 if (ret < 0) {
1505 of_node_put(child);
1506 return ret;
1507 } else if (ret == 0) {
1508 continue;
1509 }
1510
1511 port->dn = child;
1512 i++;
1513 }
1514 pcie->nports = i;
1515
1516 for (i = 0; i < pcie->nports; i++) {
1517 struct mvebu_pcie_port *port = &pcie->ports[i];
1518 int irq = port->intx_irq;
1519
1520 child = port->dn;
1521 if (!child)
1522 continue;
1523
1524 ret = mvebu_pcie_powerup(port);
1525 if (ret < 0)
1526 continue;
1527
1528 port->base = mvebu_pcie_map_registers(pdev, child, port);
1529 if (IS_ERR(port->base)) {
1530 dev_err(dev, "%s: cannot map registers\n", port->name);
1531 port->base = NULL;
1532 mvebu_pcie_powerdown(port);
1533 continue;
1534 }
1535
1536 ret = mvebu_pci_bridge_emul_init(port);
1537 if (ret < 0) {
1538 dev_err(dev, "%s: cannot init emulated bridge\n",
1539 port->name);
1540 devm_iounmap(dev, port->base);
1541 port->base = NULL;
1542 mvebu_pcie_powerdown(port);
1543 continue;
1544 }
1545
1546 if (irq > 0) {
1547 ret = mvebu_pcie_init_irq_domain(port);
1548 if (ret) {
1549 dev_err(dev, "%s: cannot init irq domain\n",
1550 port->name);
1551 pci_bridge_emul_cleanup(&port->bridge);
1552 devm_iounmap(dev, port->base);
1553 port->base = NULL;
1554 mvebu_pcie_powerdown(port);
1555 continue;
1556 }
1557 irq_set_chained_handler_and_data(irq,
1558 mvebu_pcie_irq_handler,
1559 port);
1560 }
1561
1562 /*
1563 * PCIe topology exported by mvebu hw is quite complicated. In
1564 * reality has something like N fully independent host bridges
1565 * where each host bridge has one PCIe Root Port (which acts as
1566 * PCI Bridge device). Each host bridge has its own independent
1567 * internal registers, independent access to PCI config space,
1568 * independent interrupt lines, independent window and memory
1569 * access configuration. But additionally there is some kind of
1570 * peer-to-peer support between PCIe devices behind different
1571 * host bridges limited just to forwarding of memory and I/O
1572 * transactions (forwarding of error messages and config cycles
1573 * is not supported). So we could say there are N independent
1574 * PCIe Root Complexes.
1575 *
1576 * For this kind of setup DT should have been structured into
1577 * N independent PCIe controllers / host bridges. But instead
1578 * structure in past was defined to put PCIe Root Ports of all
1579 * host bridges into one bus zero, like in classic multi-port
1580 * Root Complex setup with just one host bridge.
1581 *
1582 * This means that pci-mvebu.c driver provides "virtual" bus 0
1583 * on which registers all PCIe Root Ports (PCI Bridge devices)
1584 * specified in DT by their BDF addresses and virtually routes
1585 * PCI config access of each PCI bridge device to specific PCIe
1586 * host bridge.
1587 *
1588 * Normally PCI Bridge should choose between Type 0 and Type 1
1589 * config requests based on primary and secondary bus numbers
1590 * configured on the bridge itself. But because mvebu PCI Bridge
1591 * does not have registers for primary and secondary bus numbers
1592 * in its config space, it determinates type of config requests
1593 * via its own custom way.
1594 *
1595 * There are two options how mvebu determinate type of config
1596 * request.
1597 *
1598 * 1. If Secondary Bus Number Enable bit is not set or is not
1599 * available (applies for pre-XP PCIe controllers) then Type 0
1600 * is used if target bus number equals Local Bus Number (bits
1601 * [15:8] in register 0x1a04) and target device number differs
1602 * from Local Device Number (bits [20:16] in register 0x1a04).
1603 * Type 1 is used if target bus number differs from Local Bus
1604 * Number. And when target bus number equals Local Bus Number
1605 * and target device equals Local Device Number then request is
1606 * routed to Local PCI Bridge (PCIe Root Port).
1607 *
1608 * 2. If Secondary Bus Number Enable bit is set (bit 7 in
1609 * register 0x1a2c) then mvebu hw determinate type of config
1610 * request like compliant PCI Bridge based on primary bus number
1611 * which is configured via Local Bus Number (bits [15:8] in
1612 * register 0x1a04) and secondary bus number which is configured
1613 * via Secondary Bus Number (bits [7:0] in register 0x1a2c).
1614 * Local PCI Bridge (PCIe Root Port) is available on primary bus
1615 * as device with Local Device Number (bits [20:16] in register
1616 * 0x1a04).
1617 *
1618 * Secondary Bus Number Enable bit is disabled by default and
1619 * option 2. is not available on pre-XP PCIe controllers. Hence
1620 * this driver always use option 1.
1621 *
1622 * Basically it means that primary and secondary buses shares
1623 * one virtual number configured via Local Bus Number bits and
1624 * Local Device Number bits determinates if accessing primary
1625 * or secondary bus. Set Local Device Number to 1 and redirect
1626 * all writes of PCI Bridge Secondary Bus Number register to
1627 * Local Bus Number (bits [15:8] in register 0x1a04).
1628 *
1629 * So when accessing devices on buses behind secondary bus
1630 * number it would work correctly. And also when accessing
1631 * device 0 at secondary bus number via config space would be
1632 * correctly routed to secondary bus. Due to issues described
1633 * in mvebu_pcie_setup_hw(), PCI Bridges at primary bus (zero)
1634 * are not accessed directly via PCI config space but rarher
1635 * indirectly via kernel emulated PCI bridge driver.
1636 */
1637 mvebu_pcie_setup_hw(port);
1638 mvebu_pcie_set_local_dev_nr(port, 1);
1639 mvebu_pcie_set_local_bus_nr(port, 0);
1640 }
1641
1642 bridge->sysdata = pcie;
1643 bridge->ops = &mvebu_pcie_ops;
1644 bridge->child_ops = &mvebu_pcie_child_ops;
1645 bridge->align_resource = mvebu_pcie_align_resource;
1646 bridge->map_irq = mvebu_pcie_map_irq;
1647
1648 return pci_host_probe(bridge);
1649 }
1650
mvebu_pcie_remove(struct platform_device * pdev)1651 static void mvebu_pcie_remove(struct platform_device *pdev)
1652 {
1653 struct mvebu_pcie *pcie = platform_get_drvdata(pdev);
1654 struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
1655 u32 cmd, sspl;
1656 int i;
1657
1658 /* Remove PCI bus with all devices. */
1659 pci_lock_rescan_remove();
1660 pci_stop_root_bus(bridge->bus);
1661 pci_remove_root_bus(bridge->bus);
1662 pci_unlock_rescan_remove();
1663
1664 for (i = 0; i < pcie->nports; i++) {
1665 struct mvebu_pcie_port *port = &pcie->ports[i];
1666 int irq = port->intx_irq;
1667
1668 if (!port->base)
1669 continue;
1670
1671 /* Disable Root Bridge I/O space, memory space and bus mastering. */
1672 cmd = mvebu_readl(port, PCIE_CMD_OFF);
1673 cmd &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
1674 mvebu_writel(port, cmd, PCIE_CMD_OFF);
1675
1676 /* Mask all interrupt sources. */
1677 mvebu_writel(port, ~PCIE_INT_ALL_MASK, PCIE_INT_UNMASK_OFF);
1678
1679 /* Clear all interrupt causes. */
1680 mvebu_writel(port, ~PCIE_INT_ALL_MASK, PCIE_INT_CAUSE_OFF);
1681
1682 if (irq > 0)
1683 irq_set_chained_handler_and_data(irq, NULL, NULL);
1684
1685 /* Remove IRQ domains. */
1686 if (port->intx_irq_domain)
1687 irq_domain_remove(port->intx_irq_domain);
1688
1689 /* Free config space for emulated root bridge. */
1690 pci_bridge_emul_cleanup(&port->bridge);
1691
1692 /* Disable sending Set_Slot_Power_Limit PCIe Message. */
1693 sspl = mvebu_readl(port, PCIE_SSPL_OFF);
1694 sspl &= ~(PCIE_SSPL_VALUE_MASK | PCIE_SSPL_SCALE_MASK | PCIE_SSPL_ENABLE);
1695 mvebu_writel(port, sspl, PCIE_SSPL_OFF);
1696
1697 /* Disable and clear BARs and windows. */
1698 mvebu_pcie_disable_wins(port);
1699
1700 /* Delete PCIe IO and MEM windows. */
1701 if (port->iowin.size)
1702 mvebu_pcie_del_windows(port, port->iowin.base, port->iowin.size);
1703 if (port->memwin.size)
1704 mvebu_pcie_del_windows(port, port->memwin.base, port->memwin.size);
1705
1706 /* Power down card and disable clocks. Must be the last step. */
1707 mvebu_pcie_powerdown(port);
1708 }
1709 }
1710
1711 static const struct of_device_id mvebu_pcie_of_match_table[] = {
1712 { .compatible = "marvell,armada-xp-pcie", },
1713 { .compatible = "marvell,armada-370-pcie", },
1714 { .compatible = "marvell,dove-pcie", },
1715 { .compatible = "marvell,kirkwood-pcie", },
1716 {},
1717 };
1718
1719 static const struct dev_pm_ops mvebu_pcie_pm_ops = {
1720 NOIRQ_SYSTEM_SLEEP_PM_OPS(mvebu_pcie_suspend, mvebu_pcie_resume)
1721 };
1722
1723 static struct platform_driver mvebu_pcie_driver = {
1724 .driver = {
1725 .name = "mvebu-pcie",
1726 .of_match_table = mvebu_pcie_of_match_table,
1727 .pm = &mvebu_pcie_pm_ops,
1728 },
1729 .probe = mvebu_pcie_probe,
1730 .remove_new = mvebu_pcie_remove,
1731 };
1732 module_platform_driver(mvebu_pcie_driver);
1733
1734 MODULE_AUTHOR("Thomas Petazzoni <thomas.petazzoni@bootlin.com>");
1735 MODULE_AUTHOR("Pali Rohár <pali@kernel.org>");
1736 MODULE_DESCRIPTION("Marvell EBU PCIe controller");
1737 MODULE_LICENSE("GPL v2");
1738