1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Intel ICH6-10, Series 5 and 6, Atom C2000 (Avoton/Rangeley) GPIO driver 4 * 5 * Copyright (C) 2010 Extreme Engineering Solutions. 6 */ 7 8 #include <linux/bitops.h> 9 #include <linux/gpio/driver.h> 10 #include <linux/ioport.h> 11 #include <linux/mfd/lpc_ich.h> 12 #include <linux/module.h> 13 #include <linux/platform_device.h> 14 15 #define DRV_NAME "gpio_ich" 16 17 /* 18 * GPIO register offsets in GPIO I/O space. 19 * Each chunk of 32 GPIOs is manipulated via its own USE_SELx, IO_SELx, and 20 * LVLx registers. Logic in the read/write functions takes a register and 21 * an absolute bit number and determines the proper register offset and bit 22 * number in that register. For example, to read the value of GPIO bit 50 23 * the code would access offset ichx_regs[2(=GPIO_LVL)][1(=50/32)], 24 * bit 18 (50%32). 25 */ 26 enum GPIO_REG { 27 GPIO_USE_SEL = 0, 28 GPIO_IO_SEL, 29 GPIO_LVL, 30 GPO_BLINK 31 }; 32 33 static const u8 ichx_regs[4][3] = { 34 {0x00, 0x30, 0x40}, /* USE_SEL[1-3] offsets */ 35 {0x04, 0x34, 0x44}, /* IO_SEL[1-3] offsets */ 36 {0x0c, 0x38, 0x48}, /* LVL[1-3] offsets */ 37 {0x18, 0x18, 0x18}, /* BLINK offset */ 38 }; 39 40 static const u8 ichx_reglen[3] = { 41 0x30, 0x10, 0x10, 42 }; 43 44 static const u8 avoton_regs[4][3] = { 45 {0x00, 0x80, 0x00}, 46 {0x04, 0x84, 0x00}, 47 {0x08, 0x88, 0x00}, 48 }; 49 50 static const u8 avoton_reglen[3] = { 51 0x10, 0x10, 0x00, 52 }; 53 54 #define ICHX_WRITE(val, reg, base_res) outl(val, (reg) + (base_res)->start) 55 #define ICHX_READ(reg, base_res) inl((reg) + (base_res)->start) 56 57 struct ichx_desc { 58 /* Max GPIO pins the chipset can have */ 59 uint ngpio; 60 61 /* chipset registers */ 62 const u8 (*regs)[3]; 63 const u8 *reglen; 64 65 /* GPO_BLINK is available on this chipset */ 66 bool have_blink; 67 68 /* Whether the chipset has GPIO in GPE0_STS in the PM IO region */ 69 bool uses_gpe0; 70 71 /* USE_SEL is bogus on some chipsets, eg 3100 */ 72 u32 use_sel_ignore[3]; 73 74 /* Some chipsets have quirks, let these use their own request/get */ 75 int (*request)(struct gpio_chip *chip, unsigned int offset); 76 int (*get)(struct gpio_chip *chip, unsigned int offset); 77 78 /* 79 * Some chipsets don't let reading output values on GPIO_LVL register 80 * this option allows driver caching written output values 81 */ 82 bool use_outlvl_cache; 83 }; 84 85 static struct { 86 spinlock_t lock; 87 struct device *dev; 88 struct gpio_chip chip; 89 struct resource *gpio_base; /* GPIO IO base */ 90 struct resource *pm_base; /* Power Management IO base */ 91 struct ichx_desc *desc; /* Pointer to chipset-specific description */ 92 u32 orig_gpio_ctrl; /* Orig CTRL value, used to restore on exit */ 93 u8 use_gpio; /* Which GPIO groups are usable */ 94 int outlvl_cache[3]; /* cached output values */ 95 } ichx_priv; 96 97 static int modparam_gpiobase = -1; /* dynamic */ 98 module_param_named(gpiobase, modparam_gpiobase, int, 0444); 99 MODULE_PARM_DESC(gpiobase, "The GPIO number base. -1 means dynamic, which is the default."); 100 ichx_write_bit(int reg,unsigned int nr,int val,int verify)101 static int ichx_write_bit(int reg, unsigned int nr, int val, int verify) 102 { 103 unsigned long flags; 104 u32 data, tmp; 105 int reg_nr = nr / 32; 106 int bit = nr & 0x1f; 107 108 spin_lock_irqsave(&ichx_priv.lock, flags); 109 110 if (reg == GPIO_LVL && ichx_priv.desc->use_outlvl_cache) 111 data = ichx_priv.outlvl_cache[reg_nr]; 112 else 113 data = ICHX_READ(ichx_priv.desc->regs[reg][reg_nr], 114 ichx_priv.gpio_base); 115 116 if (val) 117 data |= BIT(bit); 118 else 119 data &= ~BIT(bit); 120 ICHX_WRITE(data, ichx_priv.desc->regs[reg][reg_nr], 121 ichx_priv.gpio_base); 122 if (reg == GPIO_LVL && ichx_priv.desc->use_outlvl_cache) 123 ichx_priv.outlvl_cache[reg_nr] = data; 124 125 tmp = ICHX_READ(ichx_priv.desc->regs[reg][reg_nr], 126 ichx_priv.gpio_base); 127 128 spin_unlock_irqrestore(&ichx_priv.lock, flags); 129 130 return (verify && data != tmp) ? -EPERM : 0; 131 } 132 ichx_read_bit(int reg,unsigned int nr)133 static int ichx_read_bit(int reg, unsigned int nr) 134 { 135 unsigned long flags; 136 u32 data; 137 int reg_nr = nr / 32; 138 int bit = nr & 0x1f; 139 140 spin_lock_irqsave(&ichx_priv.lock, flags); 141 142 data = ICHX_READ(ichx_priv.desc->regs[reg][reg_nr], 143 ichx_priv.gpio_base); 144 145 if (reg == GPIO_LVL && ichx_priv.desc->use_outlvl_cache) 146 data = ichx_priv.outlvl_cache[reg_nr] | data; 147 148 spin_unlock_irqrestore(&ichx_priv.lock, flags); 149 150 return !!(data & BIT(bit)); 151 } 152 ichx_gpio_check_available(struct gpio_chip * gpio,unsigned int nr)153 static bool ichx_gpio_check_available(struct gpio_chip *gpio, unsigned int nr) 154 { 155 return !!(ichx_priv.use_gpio & BIT(nr / 32)); 156 } 157 ichx_gpio_get_direction(struct gpio_chip * gpio,unsigned int nr)158 static int ichx_gpio_get_direction(struct gpio_chip *gpio, unsigned int nr) 159 { 160 if (ichx_read_bit(GPIO_IO_SEL, nr)) 161 return GPIO_LINE_DIRECTION_IN; 162 163 return GPIO_LINE_DIRECTION_OUT; 164 } 165 ichx_gpio_direction_input(struct gpio_chip * gpio,unsigned int nr)166 static int ichx_gpio_direction_input(struct gpio_chip *gpio, unsigned int nr) 167 { 168 /* 169 * Try setting pin as an input and verify it worked since many pins 170 * are output-only. 171 */ 172 return ichx_write_bit(GPIO_IO_SEL, nr, 1, 1); 173 } 174 ichx_gpio_direction_output(struct gpio_chip * gpio,unsigned int nr,int val)175 static int ichx_gpio_direction_output(struct gpio_chip *gpio, unsigned int nr, 176 int val) 177 { 178 /* Disable blink hardware which is available for GPIOs from 0 to 31. */ 179 if (nr < 32 && ichx_priv.desc->have_blink) 180 ichx_write_bit(GPO_BLINK, nr, 0, 0); 181 182 /* Set GPIO output value. */ 183 ichx_write_bit(GPIO_LVL, nr, val, 0); 184 185 /* 186 * Try setting pin as an output and verify it worked since many pins 187 * are input-only. 188 */ 189 return ichx_write_bit(GPIO_IO_SEL, nr, 0, 1); 190 } 191 ichx_gpio_get(struct gpio_chip * chip,unsigned int nr)192 static int ichx_gpio_get(struct gpio_chip *chip, unsigned int nr) 193 { 194 return ichx_read_bit(GPIO_LVL, nr); 195 } 196 ich6_gpio_get(struct gpio_chip * chip,unsigned int nr)197 static int ich6_gpio_get(struct gpio_chip *chip, unsigned int nr) 198 { 199 unsigned long flags; 200 u32 data; 201 202 /* 203 * GPI 0 - 15 need to be read from the power management registers on 204 * a ICH6/3100 bridge. 205 */ 206 if (nr < 16) { 207 if (!ichx_priv.pm_base) 208 return -ENXIO; 209 210 spin_lock_irqsave(&ichx_priv.lock, flags); 211 212 /* GPI 0 - 15 are latched, write 1 to clear*/ 213 ICHX_WRITE(BIT(16 + nr), 0, ichx_priv.pm_base); 214 data = ICHX_READ(0, ichx_priv.pm_base); 215 216 spin_unlock_irqrestore(&ichx_priv.lock, flags); 217 218 return !!((data >> 16) & BIT(nr)); 219 } else { 220 return ichx_gpio_get(chip, nr); 221 } 222 } 223 ichx_gpio_request(struct gpio_chip * chip,unsigned int nr)224 static int ichx_gpio_request(struct gpio_chip *chip, unsigned int nr) 225 { 226 if (!ichx_gpio_check_available(chip, nr)) 227 return -ENXIO; 228 229 /* 230 * Note we assume the BIOS properly set a bridge's USE value. Some 231 * chips (eg Intel 3100) have bogus USE values though, so first see if 232 * the chipset's USE value can be trusted for this specific bit. 233 * If it can't be trusted, assume that the pin can be used as a GPIO. 234 */ 235 if (ichx_priv.desc->use_sel_ignore[nr / 32] & BIT(nr & 0x1f)) 236 return 0; 237 238 return ichx_read_bit(GPIO_USE_SEL, nr) ? 0 : -ENODEV; 239 } 240 ich6_gpio_request(struct gpio_chip * chip,unsigned int nr)241 static int ich6_gpio_request(struct gpio_chip *chip, unsigned int nr) 242 { 243 /* 244 * Fixups for bits 16 and 17 are necessary on the Intel ICH6/3100 245 * bridge as they are controlled by USE register bits 0 and 1. See 246 * "Table 704 GPIO_USE_SEL1 register" in the i3100 datasheet for 247 * additional info. 248 */ 249 if (nr == 16 || nr == 17) 250 nr -= 16; 251 252 return ichx_gpio_request(chip, nr); 253 } 254 ichx_gpio_set(struct gpio_chip * chip,unsigned int nr,int val)255 static void ichx_gpio_set(struct gpio_chip *chip, unsigned int nr, int val) 256 { 257 ichx_write_bit(GPIO_LVL, nr, val, 0); 258 } 259 ichx_gpiolib_setup(struct gpio_chip * chip)260 static void ichx_gpiolib_setup(struct gpio_chip *chip) 261 { 262 chip->owner = THIS_MODULE; 263 chip->label = DRV_NAME; 264 chip->parent = ichx_priv.dev; 265 266 /* Allow chip-specific overrides of request()/get() */ 267 chip->request = ichx_priv.desc->request ? 268 ichx_priv.desc->request : ichx_gpio_request; 269 chip->get = ichx_priv.desc->get ? 270 ichx_priv.desc->get : ichx_gpio_get; 271 272 chip->set = ichx_gpio_set; 273 chip->get_direction = ichx_gpio_get_direction; 274 chip->direction_input = ichx_gpio_direction_input; 275 chip->direction_output = ichx_gpio_direction_output; 276 chip->base = modparam_gpiobase; 277 chip->ngpio = ichx_priv.desc->ngpio; 278 chip->can_sleep = false; 279 chip->dbg_show = NULL; 280 } 281 282 /* ICH6-based, 631xesb-based */ 283 static struct ichx_desc ich6_desc = { 284 /* Bridges using the ICH6 controller need fixups for GPIO 0 - 17 */ 285 .request = ich6_gpio_request, 286 .get = ich6_gpio_get, 287 288 /* GPIO 0-15 are read in the GPE0_STS PM register */ 289 .uses_gpe0 = true, 290 291 .ngpio = 50, 292 .have_blink = true, 293 .regs = ichx_regs, 294 .reglen = ichx_reglen, 295 }; 296 297 /* Intel 3100 */ 298 static struct ichx_desc i3100_desc = { 299 /* 300 * Bits 16,17, 20 of USE_SEL and bit 16 of USE_SEL2 always read 0 on 301 * the Intel 3100. See "Table 712. GPIO Summary Table" of 3100 302 * Datasheet for more info. 303 */ 304 .use_sel_ignore = {0x00130000, 0x00010000, 0x0}, 305 306 /* The 3100 needs fixups for GPIO 0 - 17 */ 307 .request = ich6_gpio_request, 308 .get = ich6_gpio_get, 309 310 /* GPIO 0-15 are read in the GPE0_STS PM register */ 311 .uses_gpe0 = true, 312 313 .ngpio = 50, 314 .regs = ichx_regs, 315 .reglen = ichx_reglen, 316 }; 317 318 /* ICH7 and ICH8-based */ 319 static struct ichx_desc ich7_desc = { 320 .ngpio = 50, 321 .have_blink = true, 322 .regs = ichx_regs, 323 .reglen = ichx_reglen, 324 }; 325 326 /* ICH9-based */ 327 static struct ichx_desc ich9_desc = { 328 .ngpio = 61, 329 .have_blink = true, 330 .regs = ichx_regs, 331 .reglen = ichx_reglen, 332 }; 333 334 /* ICH10-based - Consumer/corporate versions have different amount of GPIO */ 335 static struct ichx_desc ich10_cons_desc = { 336 .ngpio = 61, 337 .have_blink = true, 338 .regs = ichx_regs, 339 .reglen = ichx_reglen, 340 }; 341 static struct ichx_desc ich10_corp_desc = { 342 .ngpio = 72, 343 .have_blink = true, 344 .regs = ichx_regs, 345 .reglen = ichx_reglen, 346 }; 347 348 /* Intel 5 series, 6 series, 3400 series, and C200 series */ 349 static struct ichx_desc intel5_desc = { 350 .ngpio = 76, 351 .regs = ichx_regs, 352 .reglen = ichx_reglen, 353 }; 354 355 /* Avoton */ 356 static struct ichx_desc avoton_desc = { 357 /* Avoton has only 59 GPIOs, but we assume the first set of register 358 * (Core) has 32 instead of 31 to keep gpio-ich compliance 359 */ 360 .ngpio = 60, 361 .regs = avoton_regs, 362 .reglen = avoton_reglen, 363 .use_outlvl_cache = true, 364 }; 365 ichx_gpio_request_regions(struct device * dev,struct resource * res_base,const char * name,u8 use_gpio)366 static int ichx_gpio_request_regions(struct device *dev, 367 struct resource *res_base, const char *name, u8 use_gpio) 368 { 369 int i; 370 371 if (!res_base || !res_base->start || !res_base->end) 372 return -ENODEV; 373 374 for (i = 0; i < ARRAY_SIZE(ichx_priv.desc->regs[0]); i++) { 375 if (!(use_gpio & BIT(i))) 376 continue; 377 if (!devm_request_region(dev, 378 res_base->start + ichx_priv.desc->regs[0][i], 379 ichx_priv.desc->reglen[i], name)) 380 return -EBUSY; 381 } 382 return 0; 383 } 384 ichx_gpio_probe(struct platform_device * pdev)385 static int ichx_gpio_probe(struct platform_device *pdev) 386 { 387 struct device *dev = &pdev->dev; 388 struct lpc_ich_info *ich_info = dev_get_platdata(dev); 389 struct resource *res_base, *res_pm; 390 int err; 391 392 if (!ich_info) 393 return -ENODEV; 394 395 switch (ich_info->gpio_version) { 396 case ICH_I3100_GPIO: 397 ichx_priv.desc = &i3100_desc; 398 break; 399 case ICH_V5_GPIO: 400 ichx_priv.desc = &intel5_desc; 401 break; 402 case ICH_V6_GPIO: 403 ichx_priv.desc = &ich6_desc; 404 break; 405 case ICH_V7_GPIO: 406 ichx_priv.desc = &ich7_desc; 407 break; 408 case ICH_V9_GPIO: 409 ichx_priv.desc = &ich9_desc; 410 break; 411 case ICH_V10CORP_GPIO: 412 ichx_priv.desc = &ich10_corp_desc; 413 break; 414 case ICH_V10CONS_GPIO: 415 ichx_priv.desc = &ich10_cons_desc; 416 break; 417 case AVOTON_GPIO: 418 ichx_priv.desc = &avoton_desc; 419 break; 420 default: 421 return -ENODEV; 422 } 423 424 ichx_priv.dev = dev; 425 spin_lock_init(&ichx_priv.lock); 426 427 res_base = platform_get_resource(pdev, IORESOURCE_IO, ICH_RES_GPIO); 428 err = ichx_gpio_request_regions(dev, res_base, pdev->name, 429 ich_info->use_gpio); 430 if (err) 431 return err; 432 433 ichx_priv.gpio_base = res_base; 434 ichx_priv.use_gpio = ich_info->use_gpio; 435 436 /* 437 * If necessary, determine the I/O address of ACPI/power management 438 * registers which are needed to read the GPE0 register for GPI pins 439 * 0 - 15 on some chipsets. 440 */ 441 if (!ichx_priv.desc->uses_gpe0) 442 goto init; 443 444 res_pm = platform_get_resource(pdev, IORESOURCE_IO, ICH_RES_GPE0); 445 if (!res_pm) { 446 dev_warn(dev, "ACPI BAR is unavailable, GPI 0 - 15 unavailable\n"); 447 goto init; 448 } 449 450 if (!devm_request_region(dev, res_pm->start, resource_size(res_pm), 451 pdev->name)) { 452 dev_warn(dev, "ACPI BAR is busy, GPI 0 - 15 unavailable\n"); 453 goto init; 454 } 455 456 ichx_priv.pm_base = res_pm; 457 458 init: 459 ichx_gpiolib_setup(&ichx_priv.chip); 460 err = devm_gpiochip_add_data(dev, &ichx_priv.chip, NULL); 461 if (err) { 462 dev_err(dev, "Failed to register GPIOs\n"); 463 return err; 464 } 465 466 dev_info(dev, "GPIO from %d to %d\n", ichx_priv.chip.base, 467 ichx_priv.chip.base + ichx_priv.chip.ngpio - 1); 468 469 return 0; 470 } 471 472 static struct platform_driver ichx_gpio_driver = { 473 .driver = { 474 .name = DRV_NAME, 475 }, 476 .probe = ichx_gpio_probe, 477 }; 478 479 module_platform_driver(ichx_gpio_driver); 480 481 MODULE_AUTHOR("Peter Tyser <ptyser@xes-inc.com>"); 482 MODULE_DESCRIPTION("GPIO interface for Intel ICH series"); 483 MODULE_LICENSE("GPL"); 484 MODULE_ALIAS("platform:"DRV_NAME); 485