1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2
3#include <dt-bindings/gpio/gpio.h>
4#include <dt-bindings/interrupt-controller/irq.h>
5#include <dt-bindings/interrupt-controller/arm-gic.h>
6#include <dt-bindings/pinctrl/rockchip.h>
7#include <dt-bindings/clock/rk3036-cru.h>
8#include <dt-bindings/soc/rockchip,boot-mode.h>
9#include <dt-bindings/power/rk3036-power.h>
10
11/ {
12	#address-cells = <1>;
13	#size-cells = <1>;
14
15	compatible = "rockchip,rk3036";
16
17	interrupt-parent = <&gic>;
18
19	aliases {
20		i2c0 = &i2c0;
21		i2c1 = &i2c1;
22		i2c2 = &i2c2;
23		mshc0 = &emmc;
24		mshc1 = &sdmmc;
25		mshc2 = &sdio;
26		serial0 = &uart0;
27		serial1 = &uart1;
28		serial2 = &uart2;
29		spi = &spi;
30	};
31
32	cpus {
33		#address-cells = <1>;
34		#size-cells = <0>;
35		enable-method = "rockchip,rk3036-smp";
36
37		cpu0: cpu@f00 {
38			device_type = "cpu";
39			compatible = "arm,cortex-a7";
40			reg = <0xf00>;
41			resets = <&cru SRST_CORE0>;
42			operating-points = <
43				/* KHz    uV */
44				 816000 1000000
45			>;
46			clock-latency = <40000>;
47			clocks = <&cru ARMCLK>;
48		};
49
50		cpu1: cpu@f01 {
51			device_type = "cpu";
52			compatible = "arm,cortex-a7";
53			reg = <0xf01>;
54			resets = <&cru SRST_CORE1>;
55		};
56	};
57
58	arm-pmu {
59		compatible = "arm,cortex-a7-pmu";
60		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
61			     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
62		interrupt-affinity = <&cpu0>, <&cpu1>;
63	};
64
65	display-subsystem {
66		compatible = "rockchip,display-subsystem";
67		ports = <&vop_out>;
68	};
69
70	timer {
71		compatible = "arm,armv7-timer";
72		arm,cpu-registers-not-fw-configured;
73		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
74			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
75			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
76			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
77		clock-frequency = <24000000>;
78	};
79
80	xin24m: oscillator {
81		compatible = "fixed-clock";
82		clock-frequency = <24000000>;
83		clock-output-names = "xin24m";
84		#clock-cells = <0>;
85	};
86
87	bus_intmem: sram@10080000 {
88		compatible = "mmio-sram";
89		reg = <0x10080000 0x2000>;
90		#address-cells = <1>;
91		#size-cells = <1>;
92		ranges = <0 0x10080000 0x2000>;
93
94		smp-sram@0 {
95			compatible = "rockchip,rk3066-smp-sram";
96			reg = <0x00 0x10>;
97		};
98	};
99
100	gpu: gpu@10090000 {
101		compatible = "rockchip,rk3036-mali", "arm,mali-400";
102		reg = <0x10090000 0x10000>;
103		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
104			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
105			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
106			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
107		interrupt-names = "gp",
108				  "gpmmu",
109				  "pp0",
110				  "ppmmu0";
111		assigned-clocks = <&cru SCLK_GPU>;
112		assigned-clock-rates = <100000000>;
113		clocks = <&cru SCLK_GPU>, <&cru SCLK_GPU>;
114		clock-names = "bus", "core";
115		power-domains = <&power RK3036_PD_GPU>;
116		resets = <&cru SRST_GPU>;
117		status = "disabled";
118	};
119
120	vpu: video-codec@10108000 {
121		compatible = "rockchip,rk3036-vpu";
122		reg = <0x10108000 0x800>;
123		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
124		interrupt-names = "vdpu";
125		clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
126		clock-names = "aclk", "hclk";
127		iommus = <&vpu_mmu>;
128		power-domains = <&power RK3036_PD_VPU>;
129	};
130
131	vpu_mmu: iommu@10108800 {
132		compatible = "rockchip,iommu";
133		reg = <0x10108800 0x100>;
134		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
135		clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
136		clock-names = "aclk", "iface";
137		power-domains = <&power RK3036_PD_VPU>;
138		#iommu-cells = <0>;
139	};
140
141	vop: vop@10118000 {
142		compatible = "rockchip,rk3036-vop";
143		reg = <0x10118000 0x19c>;
144		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
145		clocks = <&cru ACLK_LCDC>, <&cru SCLK_LCDC>, <&cru HCLK_LCDC>;
146		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
147		resets = <&cru SRST_LCDC1_A>, <&cru SRST_LCDC1_H>, <&cru SRST_LCDC1_D>;
148		reset-names = "axi", "ahb", "dclk";
149		iommus = <&vop_mmu>;
150		power-domains = <&power RK3036_PD_VIO>;
151		status = "disabled";
152
153		vop_out: port {
154			#address-cells = <1>;
155			#size-cells = <0>;
156			vop_out_hdmi: endpoint@0 {
157				reg = <0>;
158				remote-endpoint = <&hdmi_in_vop>;
159			};
160		};
161	};
162
163	vop_mmu: iommu@10118300 {
164		compatible = "rockchip,iommu";
165		reg = <0x10118300 0x100>;
166		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
167		clocks = <&cru ACLK_LCDC>, <&cru HCLK_LCDC>;
168		clock-names = "aclk", "iface";
169		power-domains = <&power RK3036_PD_VIO>;
170		#iommu-cells = <0>;
171		status = "disabled";
172	};
173
174	qos_gpu: qos@1012d000 {
175		compatible = "rockchip,rk3036-qos", "syscon";
176		reg = <0x1012d000 0x20>;
177	};
178
179	qos_vpu: qos@1012e000 {
180		compatible = "rockchip,rk3036-qos", "syscon";
181		reg = <0x1012e000 0x20>;
182	};
183
184	qos_vio: qos@1012f000 {
185		compatible = "rockchip,rk3036-qos", "syscon";
186		reg = <0x1012f000 0x20>;
187	};
188
189	gic: interrupt-controller@10139000 {
190		compatible = "arm,gic-400";
191		interrupt-controller;
192		#interrupt-cells = <3>;
193		#address-cells = <0>;
194
195		reg = <0x10139000 0x1000>,
196		      <0x1013a000 0x2000>,
197		      <0x1013c000 0x2000>,
198		      <0x1013e000 0x2000>;
199		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
200	};
201
202	usb_otg: usb@10180000 {
203		compatible = "rockchip,rk3036-usb", "rockchip,rk3066-usb",
204				"snps,dwc2";
205		reg = <0x10180000 0x40000>;
206		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
207		clocks = <&cru HCLK_OTG0>;
208		clock-names = "otg";
209		dr_mode = "otg";
210		g-np-tx-fifo-size = <16>;
211		g-rx-fifo-size = <275>;
212		g-tx-fifo-size = <256 128 128 64 64 32>;
213		status = "disabled";
214	};
215
216	usb_host: usb@101c0000 {
217		compatible = "rockchip,rk3036-usb", "rockchip,rk3066-usb",
218				"snps,dwc2";
219		reg = <0x101c0000 0x40000>;
220		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
221		clocks = <&cru HCLK_OTG1>;
222		clock-names = "otg";
223		dr_mode = "host";
224		status = "disabled";
225	};
226
227	emac: ethernet@10200000 {
228		compatible = "rockchip,rk3036-emac";
229		reg = <0x10200000 0x4000>;
230		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
231		rockchip,grf = <&grf>;
232		clocks = <&cru HCLK_MAC>, <&cru SCLK_MACREF>, <&cru SCLK_MAC>;
233		clock-names = "hclk", "macref", "macclk";
234		/*
235		 * Fix the emac parent clock is DPLL instead of APLL.
236		 * since that will cause some unstable things if the cpufreq
237		 * is working. (e.g: the accurate 50MHz what mac_ref need)
238		 */
239		assigned-clocks = <&cru SCLK_MACPLL>;
240		assigned-clock-parents = <&cru PLL_DPLL>;
241		max-speed = <100>;
242		phy-mode = "rmii";
243		status = "disabled";
244	};
245
246	sdmmc: mmc@10214000 {
247		compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
248		reg = <0x10214000 0x4000>;
249		clock-frequency = <37500000>;
250		max-frequency = <37500000>;
251		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
252		clock-names = "biu", "ciu";
253		fifo-depth = <0x100>;
254		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
255		resets = <&cru SRST_MMC0>;
256		reset-names = "reset";
257		status = "disabled";
258	};
259
260	sdio: mmc@10218000 {
261		compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
262		reg = <0x10218000 0x4000>;
263		max-frequency = <37500000>;
264		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
265			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
266		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
267		fifo-depth = <0x100>;
268		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
269		resets = <&cru SRST_SDIO>;
270		reset-names = "reset";
271		status = "disabled";
272	};
273
274	emmc: mmc@1021c000 {
275		compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
276		reg = <0x1021c000 0x4000>;
277		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
278		bus-width = <8>;
279		cap-mmc-highspeed;
280		clock-frequency = <37500000>;
281		max-frequency = <37500000>;
282		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
283			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
284		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
285		rockchip,default-sample-phase = <158>;
286		disable-wp;
287		dmas = <&pdma 12>;
288		dma-names = "rx-tx";
289		fifo-depth = <0x100>;
290		mmc-ddr-1_8v;
291		non-removable;
292		pinctrl-names = "default";
293		pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
294		resets = <&cru SRST_EMMC>;
295		reset-names = "reset";
296		status = "disabled";
297	};
298
299	i2s: i2s@10220000 {
300		compatible = "rockchip,rk3036-i2s", "rockchip,rk3066-i2s";
301		reg = <0x10220000 0x4000>;
302		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
303		clock-names = "i2s_clk", "i2s_hclk";
304		clocks = <&cru SCLK_I2S>, <&cru HCLK_I2S>;
305		dmas = <&pdma 0>, <&pdma 1>;
306		dma-names = "tx", "rx";
307		pinctrl-names = "default";
308		pinctrl-0 = <&i2s_bus>;
309		#sound-dai-cells = <0>;
310		status = "disabled";
311	};
312
313	nfc: nand-controller@10500000 {
314		compatible = "rockchip,rk3036-nfc",
315			     "rockchip,rk2928-nfc";
316		reg = <0x10500000 0x4000>;
317		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
318		clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>;
319		clock-names = "ahb", "nfc";
320		assigned-clocks = <&cru SCLK_NANDC>;
321		assigned-clock-rates = <150000000>;
322		pinctrl-0 = <&flash_ale &flash_bus8 &flash_cle &flash_csn0
323			     &flash_rdn &flash_rdy &flash_wrn>;
324		pinctrl-names = "default";
325		status = "disabled";
326	};
327
328	cru: clock-controller@20000000 {
329		compatible = "rockchip,rk3036-cru";
330		reg = <0x20000000 0x1000>;
331		clocks = <&xin24m>;
332		clock-names = "xin24m";
333		rockchip,grf = <&grf>;
334		#clock-cells = <1>;
335		#reset-cells = <1>;
336		assigned-clocks = <&cru PLL_GPLL>;
337		assigned-clock-rates = <594000000>;
338	};
339
340	grf: syscon@20008000 {
341		compatible = "rockchip,rk3036-grf", "syscon", "simple-mfd";
342		reg = <0x20008000 0x1000>;
343
344		power: power-controller {
345			compatible = "rockchip,rk3036-power-controller";
346			#power-domain-cells = <1>;
347			#address-cells = <1>;
348			#size-cells = <0>;
349
350			power-domain@RK3036_PD_VIO {
351				reg = <RK3036_PD_VIO>;
352				clocks = <&cru ACLK_LCDC>,
353					 <&cru HCLK_LCDC>,
354					 <&cru SCLK_LCDC>;
355				pm_qos = <&qos_vio>;
356				#power-domain-cells = <0>;
357			};
358
359			power-domain@RK3036_PD_VPU {
360				reg = <RK3036_PD_VPU>;
361				clocks = <&cru ACLK_VCODEC>,
362					 <&cru HCLK_VCODEC>;
363				pm_qos = <&qos_vpu>;
364				#power-domain-cells = <0>;
365			};
366
367			power-domain@RK3036_PD_GPU {
368				reg = <RK3036_PD_GPU>;
369				clocks = <&cru SCLK_GPU>;
370				pm_qos = <&qos_gpu>;
371				#power-domain-cells = <0>;
372			};
373		};
374
375		reboot-mode {
376			compatible = "syscon-reboot-mode";
377			offset = <0x1d8>;
378			mode-normal = <BOOT_NORMAL>;
379			mode-recovery = <BOOT_RECOVERY>;
380			mode-bootloader = <BOOT_FASTBOOT>;
381			mode-loader = <BOOT_BL_DOWNLOAD>;
382		};
383	};
384
385	acodec: acodec-ana@20030000 {
386		compatible = "rk3036-codec";
387		reg = <0x20030000 0x4000>;
388		rockchip,grf = <&grf>;
389		clock-names = "acodec_pclk";
390		clocks = <&cru PCLK_ACODEC>;
391		status = "disabled";
392	};
393
394	hdmi: hdmi@20034000 {
395		compatible = "rockchip,rk3036-inno-hdmi";
396		reg = <0x20034000 0x4000>;
397		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
398		clocks = <&cru  PCLK_HDMI>;
399		clock-names = "pclk";
400		rockchip,grf = <&grf>;
401		pinctrl-names = "default";
402		pinctrl-0 = <&hdmi_ctl>;
403		status = "disabled";
404
405		ports {
406			#address-cells = <1>;
407			#size-cells = <0>;
408
409			hdmi_in: port@0 {
410				reg = <0>;
411
412				hdmi_in_vop: endpoint {
413					remote-endpoint = <&vop_out_hdmi>;
414				};
415			};
416
417			hdmi_out: port@1 {
418				reg = <1>;
419			};
420		};
421	};
422
423	timer: timer@20044000 {
424		compatible = "rockchip,rk3036-timer", "rockchip,rk3288-timer";
425		reg = <0x20044000 0x20>;
426		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
427		clocks = <&cru PCLK_TIMER>, <&xin24m>;
428		clock-names = "pclk", "timer";
429	};
430
431	pwm0: pwm@20050000 {
432		compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
433		reg = <0x20050000 0x10>;
434		#pwm-cells = <3>;
435		clocks = <&cru PCLK_PWM>;
436		pinctrl-names = "default";
437		pinctrl-0 = <&pwm0_pin>;
438		status = "disabled";
439	};
440
441	pwm1: pwm@20050010 {
442		compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
443		reg = <0x20050010 0x10>;
444		#pwm-cells = <3>;
445		clocks = <&cru PCLK_PWM>;
446		pinctrl-names = "default";
447		pinctrl-0 = <&pwm1_pin>;
448		status = "disabled";
449	};
450
451	pwm2: pwm@20050020 {
452		compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
453		reg = <0x20050020 0x10>;
454		#pwm-cells = <3>;
455		clocks = <&cru PCLK_PWM>;
456		pinctrl-names = "default";
457		pinctrl-0 = <&pwm2_pin>;
458		status = "disabled";
459	};
460
461	pwm3: pwm@20050030 {
462		compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
463		reg = <0x20050030 0x10>;
464		#pwm-cells = <2>;
465		clocks = <&cru PCLK_PWM>;
466		pinctrl-names = "default";
467		pinctrl-0 = <&pwm3_pin>;
468		status = "disabled";
469	};
470
471	i2c1: i2c@20056000 {
472		compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c";
473		reg = <0x20056000 0x1000>;
474		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
475		#address-cells = <1>;
476		#size-cells = <0>;
477		clock-names = "i2c";
478		clocks = <&cru PCLK_I2C1>;
479		pinctrl-names = "default";
480		pinctrl-0 = <&i2c1_xfer>;
481		status = "disabled";
482	};
483
484	i2c2: i2c@2005a000 {
485		compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c";
486		reg = <0x2005a000 0x1000>;
487		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
488		#address-cells = <1>;
489		#size-cells = <0>;
490		clock-names = "i2c";
491		clocks = <&cru PCLK_I2C2>;
492		pinctrl-names = "default";
493		pinctrl-0 = <&i2c2_xfer>;
494		status = "disabled";
495	};
496
497	uart0: serial@20060000 {
498		compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
499		reg = <0x20060000 0x100>;
500		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
501		reg-shift = <2>;
502		reg-io-width = <4>;
503		clock-frequency = <24000000>;
504		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
505		clock-names = "baudclk", "apb_pclk";
506		pinctrl-names = "default";
507		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
508		status = "disabled";
509	};
510
511	uart1: serial@20064000 {
512		compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
513		reg = <0x20064000 0x100>;
514		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
515		reg-shift = <2>;
516		reg-io-width = <4>;
517		clock-frequency = <24000000>;
518		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
519		clock-names = "baudclk", "apb_pclk";
520		pinctrl-names = "default";
521		pinctrl-0 = <&uart1_xfer>;
522		status = "disabled";
523	};
524
525	uart2: serial@20068000 {
526		compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
527		reg = <0x20068000 0x100>;
528		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
529		reg-shift = <2>;
530		reg-io-width = <4>;
531		clock-frequency = <24000000>;
532		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
533		clock-names = "baudclk", "apb_pclk";
534		pinctrl-names = "default";
535		pinctrl-0 = <&uart2_xfer>;
536		status = "disabled";
537	};
538
539	i2c0: i2c@20072000 {
540		compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c";
541		reg = <0x20072000 0x1000>;
542		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
543		#address-cells = <1>;
544		#size-cells = <0>;
545		clock-names = "i2c";
546		clocks = <&cru PCLK_I2C0>;
547		pinctrl-names = "default";
548		pinctrl-0 = <&i2c0_xfer>;
549		status = "disabled";
550	};
551
552	spi: spi@20074000 {
553		compatible = "rockchip,rockchip-spi";
554		reg = <0x20074000 0x1000>;
555		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
556		clocks = <&cru PCLK_SPI>, <&cru SCLK_SPI>;
557		clock-names = "apb-pclk","spi_pclk";
558		dmas = <&pdma 8>, <&pdma 9>;
559		dma-names = "tx", "rx";
560		pinctrl-names = "default";
561		pinctrl-0 = <&spi_txd &spi_rxd &spi_clk &spi_cs0>;
562		#address-cells = <1>;
563		#size-cells = <0>;
564		status = "disabled";
565	};
566
567	pdma: dma-controller@20078000 {
568		compatible = "arm,pl330", "arm,primecell";
569		reg = <0x20078000 0x4000>;
570		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
571			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
572		#dma-cells = <1>;
573		arm,pl330-broken-no-flushp;
574		arm,pl330-periph-burst;
575		clocks = <&cru ACLK_DMAC2>;
576		clock-names = "apb_pclk";
577	};
578
579	pinctrl: pinctrl {
580		compatible = "rockchip,rk3036-pinctrl";
581		rockchip,grf = <&grf>;
582		#address-cells = <1>;
583		#size-cells = <1>;
584		ranges;
585
586		gpio0: gpio@2007c000 {
587			compatible = "rockchip,gpio-bank";
588			reg = <0x2007c000 0x100>;
589			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
590			clocks = <&cru PCLK_GPIO0>;
591
592			gpio-controller;
593			#gpio-cells = <2>;
594
595			interrupt-controller;
596			#interrupt-cells = <2>;
597		};
598
599		gpio1: gpio@20080000 {
600			compatible = "rockchip,gpio-bank";
601			reg = <0x20080000 0x100>;
602			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
603			clocks = <&cru PCLK_GPIO1>;
604
605			gpio-controller;
606			#gpio-cells = <2>;
607
608			interrupt-controller;
609			#interrupt-cells = <2>;
610		};
611
612		gpio2: gpio@20084000 {
613			compatible = "rockchip,gpio-bank";
614			reg = <0x20084000 0x100>;
615			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
616			clocks = <&cru PCLK_GPIO2>;
617
618			gpio-controller;
619			#gpio-cells = <2>;
620
621			interrupt-controller;
622			#interrupt-cells = <2>;
623		};
624
625		pcfg_pull_default: pcfg-pull-default {
626			bias-pull-pin-default;
627		};
628
629		pcfg_pull_none: pcfg-pull-none {
630			bias-disable;
631		};
632
633		pwm0 {
634			pwm0_pin: pwm0-pin {
635				rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>;
636			};
637		};
638
639		pwm1 {
640			pwm1_pin: pwm1-pin {
641				rockchip,pins = <0 RK_PA1 2 &pcfg_pull_none>;
642			};
643		};
644
645		pwm2 {
646			pwm2_pin: pwm2-pin {
647				rockchip,pins = <0 RK_PA1 2 &pcfg_pull_none>;
648			};
649		};
650
651		pwm3 {
652			pwm3_pin: pwm3-pin {
653				rockchip,pins = <0 RK_PD3 1 &pcfg_pull_none>;
654			};
655		};
656
657		sdmmc {
658			sdmmc_clk: sdmmc-clk {
659				rockchip,pins = <1 RK_PC0 1 &pcfg_pull_none>;
660			};
661
662			sdmmc_cmd: sdmmc-cmd {
663				rockchip,pins = <1 RK_PB7 1 &pcfg_pull_default>;
664			};
665
666			sdmmc_cd: sdmmc-cd {
667				rockchip,pins = <1 RK_PC1 1 &pcfg_pull_default>;
668			};
669
670			sdmmc_bus1: sdmmc-bus1 {
671				rockchip,pins = <1 RK_PC2 1 &pcfg_pull_default>;
672			};
673
674			sdmmc_bus4: sdmmc-bus4 {
675				rockchip,pins = <1 RK_PC2 1 &pcfg_pull_default>,
676						<1 RK_PC3 1 &pcfg_pull_default>,
677						<1 RK_PC4 1 &pcfg_pull_default>,
678						<1 RK_PC5 1 &pcfg_pull_default>;
679			};
680		};
681
682		sdio {
683			sdio_bus1: sdio-bus1 {
684				rockchip,pins = <0 RK_PB3 1 &pcfg_pull_default>;
685			};
686
687			sdio_bus4: sdio-bus4 {
688				rockchip,pins = <0 RK_PB3 1 &pcfg_pull_default>,
689						<0 RK_PB4 1 &pcfg_pull_default>,
690						<0 RK_PB5 1 &pcfg_pull_default>,
691						<0 RK_PB6 1 &pcfg_pull_default>;
692			};
693
694			sdio_cmd: sdio-cmd {
695				rockchip,pins = <0 RK_PB0 1 &pcfg_pull_default>;
696			};
697
698			sdio_clk: sdio-clk {
699				rockchip,pins = <0 RK_PB1 1 &pcfg_pull_none>;
700			};
701		};
702
703		emmc {
704			/*
705			 * We run eMMC at max speed; bump up drive strength.
706			 * We also have external pulls, so disable the internal ones.
707			 */
708			emmc_clk: emmc-clk {
709				rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none>;
710			};
711
712			emmc_cmd: emmc-cmd {
713				rockchip,pins = <2 RK_PA1 2 &pcfg_pull_default>;
714			};
715
716			emmc_bus8: emmc-bus8 {
717				rockchip,pins = <1 RK_PD0 2 &pcfg_pull_default>,
718						<1 RK_PD1 2 &pcfg_pull_default>,
719						<1 RK_PD2 2 &pcfg_pull_default>,
720						<1 RK_PD3 2 &pcfg_pull_default>,
721						<1 RK_PD4 2 &pcfg_pull_default>,
722						<1 RK_PD5 2 &pcfg_pull_default>,
723						<1 RK_PD6 2 &pcfg_pull_default>,
724						<1 RK_PD7 2 &pcfg_pull_default>;
725			};
726		};
727
728		nfc {
729			flash_ale: flash-ale {
730				rockchip,pins = <2 RK_PA0 1 &pcfg_pull_default>;
731			};
732
733			flash_bus8: flash-bus8 {
734				rockchip,pins = <1 RK_PD0 1 &pcfg_pull_default>,
735						<1 RK_PD1 1 &pcfg_pull_default>,
736						<1 RK_PD2 1 &pcfg_pull_default>,
737						<1 RK_PD3 1 &pcfg_pull_default>,
738						<1 RK_PD4 1 &pcfg_pull_default>,
739						<1 RK_PD5 1 &pcfg_pull_default>,
740						<1 RK_PD6 1 &pcfg_pull_default>,
741						<1 RK_PD7 1 &pcfg_pull_default>;
742			};
743
744			flash_cle: flash-cle {
745				rockchip,pins = <2 RK_PA1 1 &pcfg_pull_default>;
746			};
747
748			flash_csn0: flash-csn0 {
749				rockchip,pins = <2 RK_PA6 1 &pcfg_pull_default>;
750			};
751
752			flash_rdn: flash-rdn {
753				rockchip,pins = <2 RK_PA3 1 &pcfg_pull_default>;
754			};
755
756			flash_rdy: flash-rdy {
757				rockchip,pins = <2 RK_PA4 1 &pcfg_pull_default>;
758			};
759
760			flash_wrn: flash-wrn {
761				rockchip,pins = <2 RK_PA2 1 &pcfg_pull_default>;
762			};
763		};
764
765		emac {
766			emac_xfer: emac-xfer {
767				rockchip,pins = <2 RK_PB2 1 &pcfg_pull_default>, /* crs_dvalid */
768						<2 RK_PB5 1 &pcfg_pull_default>, /* tx_en */
769						<2 RK_PB6 1 &pcfg_pull_default>, /* mac_clk */
770						<2 RK_PB7 1 &pcfg_pull_default>, /* rx_err */
771						<2 RK_PC0 1 &pcfg_pull_default>, /* rxd1 */
772						<2 RK_PC1 1 &pcfg_pull_default>, /* rxd0 */
773						<2 RK_PC2 1 &pcfg_pull_default>, /* txd1 */
774						<2 RK_PC3 1 &pcfg_pull_default>; /* txd0 */
775			};
776
777			emac_mdio: emac-mdio {
778				rockchip,pins = <2 RK_PB4 1 &pcfg_pull_default>, /* mac_md */
779						<2 RK_PD1 1 &pcfg_pull_default>; /* mac_mdclk */
780			};
781		};
782
783		i2c0 {
784			i2c0_xfer: i2c0-xfer {
785				rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>,
786						<0 RK_PA1 1 &pcfg_pull_none>;
787			};
788		};
789
790		i2c1 {
791			i2c1_xfer: i2c1-xfer {
792				rockchip,pins = <0 RK_PA2 1 &pcfg_pull_none>,
793						<0 RK_PA3 1 &pcfg_pull_none>;
794			};
795		};
796
797		i2c2 {
798			i2c2_xfer: i2c2-xfer {
799				rockchip,pins = <2 RK_PC4 1 &pcfg_pull_none>,
800						<2 RK_PC5 1 &pcfg_pull_none>;
801			};
802		};
803
804		i2s {
805			i2s_bus: i2s-bus {
806				rockchip,pins = <1 RK_PA0 1 &pcfg_pull_default>,
807						<1 RK_PA1 1 &pcfg_pull_default>,
808						<1 RK_PA2 1 &pcfg_pull_default>,
809						<1 RK_PA3 1 &pcfg_pull_default>,
810						<1 RK_PA4 1 &pcfg_pull_default>,
811						<1 RK_PA5 1 &pcfg_pull_default>;
812			};
813		};
814
815		hdmi {
816			hdmi_ctl: hdmi-ctl {
817				rockchip,pins = <1 RK_PB0 1 &pcfg_pull_none>,
818						<1 RK_PB1 1 &pcfg_pull_none>,
819						<1 RK_PB2 1 &pcfg_pull_none>,
820						<1 RK_PB3 1 &pcfg_pull_none>;
821			};
822		};
823
824		uart0 {
825			uart0_xfer: uart0-xfer {
826				rockchip,pins = <0 RK_PC0 1 &pcfg_pull_default>,
827						<0 RK_PC1 1 &pcfg_pull_none>;
828			};
829
830			uart0_cts: uart0-cts {
831				rockchip,pins = <0 RK_PC2 1 &pcfg_pull_default>;
832			};
833
834			uart0_rts: uart0-rts {
835				rockchip,pins = <0 RK_PC3 1 &pcfg_pull_none>;
836			};
837		};
838
839		uart1 {
840			uart1_xfer: uart1-xfer {
841				rockchip,pins = <2 RK_PC6 1 &pcfg_pull_default>,
842						<2 RK_PC7 1 &pcfg_pull_none>;
843			};
844			/* no rts / cts for uart1 */
845		};
846
847		uart2 {
848			uart2_xfer: uart2-xfer {
849				rockchip,pins = <1 RK_PC2 2 &pcfg_pull_default>,
850						<1 RK_PC3 2 &pcfg_pull_none>;
851			};
852			/* no rts / cts for uart2 */
853		};
854
855		spi-pins {
856			spi_txd:spi-txd {
857				rockchip,pins = <1 RK_PD5 3 &pcfg_pull_default>;
858			};
859
860			spi_rxd:spi-rxd {
861				rockchip,pins = <1 RK_PD4 3 &pcfg_pull_default>;
862			};
863
864			spi_clk:spi-clk {
865				rockchip,pins = <2 RK_PA0 2 &pcfg_pull_default>;
866			};
867
868			spi_cs0:spi-cs0 {
869				rockchip,pins = <1 RK_PD6 3 &pcfg_pull_default>;
870
871			};
872
873			spi_cs1:spi-cs1 {
874				rockchip,pins = <1 RK_PD7 3 &pcfg_pull_default>;
875
876			};
877		};
878	};
879};
880