1 /* 2 drivers/net/ethernet/dec/tulip/media.c 3 4 Copyright 2000,2001 The Linux Kernel Team 5 Written/copyright 1994-2001 by Donald Becker. 6 7 This software may be used and distributed according to the terms 8 of the GNU General Public License, incorporated herein by reference. 9 10 Please submit bugs to http://bugzilla.kernel.org/ . 11 */ 12 13 #include <linux/kernel.h> 14 #include <linux/mii.h> 15 #include <linux/delay.h> 16 #include <linux/pci.h> 17 #include "tulip.h" 18 19 20 /* The maximum data clock rate is 2.5 Mhz. The minimum timing is usually 21 met by back-to-back PCI I/O cycles, but we insert a delay to avoid 22 "overclocking" issues or future 66Mhz PCI. */ 23 #define mdio_delay() ioread32(mdio_addr) 24 25 /* Read and write the MII registers using software-generated serial 26 MDIO protocol. It is just different enough from the EEPROM protocol 27 to not share code. The maxium data clock rate is 2.5 Mhz. */ 28 #define MDIO_SHIFT_CLK 0x10000 29 #define MDIO_DATA_WRITE0 0x00000 30 #define MDIO_DATA_WRITE1 0x20000 31 #define MDIO_ENB 0x00000 /* Ignore the 0x02000 databook setting. */ 32 #define MDIO_ENB_IN 0x40000 33 #define MDIO_DATA_READ 0x80000 34 35 static const unsigned char comet_miireg2offset[32] = { 36 0xB4, 0xB8, 0xBC, 0xC0, 0xC4, 0xC8, 0xCC, 0, 0,0,0,0, 0,0,0,0, 37 0,0xD0,0,0, 0,0,0,0, 0,0,0,0, 0, 0xD4, 0xD8, 0xDC, }; 38 39 40 /* MII transceiver control section. 41 Read and write the MII registers using software-generated serial 42 MDIO protocol. 43 See IEEE 802.3-2002.pdf (Section 2, Chapter "22.2.4 Management functions") 44 or DP83840A data sheet for more details. 45 */ 46 tulip_mdio_read(struct net_device * dev,int phy_id,int location)47 int tulip_mdio_read(struct net_device *dev, int phy_id, int location) 48 { 49 struct tulip_private *tp = netdev_priv(dev); 50 int i; 51 int read_cmd = (0xf6 << 10) | ((phy_id & 0x1f) << 5) | location; 52 int retval = 0; 53 void __iomem *ioaddr = tp->base_addr; 54 void __iomem *mdio_addr = ioaddr + CSR9; 55 unsigned long flags; 56 57 if (location & ~0x1f) 58 return 0xffff; 59 60 if (tp->chip_id == COMET && phy_id == 30) { 61 if (comet_miireg2offset[location]) 62 return ioread32(ioaddr + comet_miireg2offset[location]); 63 return 0xffff; 64 } 65 66 spin_lock_irqsave(&tp->mii_lock, flags); 67 if (tp->chip_id == LC82C168) { 68 iowrite32(0x60020000 + (phy_id<<23) + (location<<18), ioaddr + 0xA0); 69 ioread32(ioaddr + 0xA0); 70 ioread32(ioaddr + 0xA0); 71 for (i = 1000; i >= 0; --i) { 72 barrier(); 73 if ( ! ((retval = ioread32(ioaddr + 0xA0)) & 0x80000000)) 74 break; 75 } 76 spin_unlock_irqrestore(&tp->mii_lock, flags); 77 return retval & 0xffff; 78 } 79 80 /* Establish sync by sending at least 32 logic ones. */ 81 for (i = 32; i >= 0; i--) { 82 iowrite32(MDIO_ENB | MDIO_DATA_WRITE1, mdio_addr); 83 mdio_delay(); 84 iowrite32(MDIO_ENB | MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, mdio_addr); 85 mdio_delay(); 86 } 87 /* Shift the read command bits out. */ 88 for (i = 15; i >= 0; i--) { 89 int dataval = (read_cmd & (1 << i)) ? MDIO_DATA_WRITE1 : 0; 90 91 iowrite32(MDIO_ENB | dataval, mdio_addr); 92 mdio_delay(); 93 iowrite32(MDIO_ENB | dataval | MDIO_SHIFT_CLK, mdio_addr); 94 mdio_delay(); 95 } 96 /* Read the two transition, 16 data, and wire-idle bits. */ 97 for (i = 19; i > 0; i--) { 98 iowrite32(MDIO_ENB_IN, mdio_addr); 99 mdio_delay(); 100 retval = (retval << 1) | ((ioread32(mdio_addr) & MDIO_DATA_READ) ? 1 : 0); 101 iowrite32(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr); 102 mdio_delay(); 103 } 104 105 spin_unlock_irqrestore(&tp->mii_lock, flags); 106 return (retval>>1) & 0xffff; 107 } 108 tulip_mdio_write(struct net_device * dev,int phy_id,int location,int val)109 void tulip_mdio_write(struct net_device *dev, int phy_id, int location, int val) 110 { 111 struct tulip_private *tp = netdev_priv(dev); 112 int i; 113 int cmd = (0x5002 << 16) | ((phy_id & 0x1f) << 23) | (location<<18) | (val & 0xffff); 114 void __iomem *ioaddr = tp->base_addr; 115 void __iomem *mdio_addr = ioaddr + CSR9; 116 unsigned long flags; 117 118 if (location & ~0x1f) 119 return; 120 121 if (tp->chip_id == COMET && phy_id == 30) { 122 if (comet_miireg2offset[location]) 123 iowrite32(val, ioaddr + comet_miireg2offset[location]); 124 return; 125 } 126 127 spin_lock_irqsave(&tp->mii_lock, flags); 128 if (tp->chip_id == LC82C168) { 129 iowrite32(cmd, ioaddr + 0xA0); 130 for (i = 1000; i >= 0; --i) { 131 barrier(); 132 if ( ! (ioread32(ioaddr + 0xA0) & 0x80000000)) 133 break; 134 } 135 spin_unlock_irqrestore(&tp->mii_lock, flags); 136 return; 137 } 138 139 /* Establish sync by sending 32 logic ones. */ 140 for (i = 32; i >= 0; i--) { 141 iowrite32(MDIO_ENB | MDIO_DATA_WRITE1, mdio_addr); 142 mdio_delay(); 143 iowrite32(MDIO_ENB | MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, mdio_addr); 144 mdio_delay(); 145 } 146 /* Shift the command bits out. */ 147 for (i = 31; i >= 0; i--) { 148 int dataval = (cmd & (1 << i)) ? MDIO_DATA_WRITE1 : 0; 149 iowrite32(MDIO_ENB | dataval, mdio_addr); 150 mdio_delay(); 151 iowrite32(MDIO_ENB | dataval | MDIO_SHIFT_CLK, mdio_addr); 152 mdio_delay(); 153 } 154 /* Clear out extra bits. */ 155 for (i = 2; i > 0; i--) { 156 iowrite32(MDIO_ENB_IN, mdio_addr); 157 mdio_delay(); 158 iowrite32(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr); 159 mdio_delay(); 160 } 161 162 spin_unlock_irqrestore(&tp->mii_lock, flags); 163 } 164 165 166 /* Set up the transceiver control registers for the selected media type. */ tulip_select_media(struct net_device * dev,int startup)167 void tulip_select_media(struct net_device *dev, int startup) 168 { 169 struct tulip_private *tp = netdev_priv(dev); 170 void __iomem *ioaddr = tp->base_addr; 171 struct mediatable *mtable = tp->mtable; 172 u32 new_csr6; 173 int i; 174 175 if (mtable) { 176 struct medialeaf *mleaf = &mtable->mleaf[tp->cur_index]; 177 unsigned char *p = mleaf->leafdata; 178 switch (mleaf->type) { 179 case 0: /* 21140 non-MII xcvr. */ 180 if (tulip_debug > 1) 181 netdev_dbg(dev, "Using a 21140 non-MII transceiver with control setting %02x\n", 182 p[1]); 183 dev->if_port = p[0]; 184 if (startup) 185 iowrite32(mtable->csr12dir | 0x100, ioaddr + CSR12); 186 iowrite32(p[1], ioaddr + CSR12); 187 new_csr6 = 0x02000000 | ((p[2] & 0x71) << 18); 188 break; 189 case 2: case 4: { 190 u16 setup[5]; 191 u32 csr13val, csr14val, csr15dir, csr15val; 192 for (i = 0; i < 5; i++) 193 setup[i] = get_u16(&p[i*2 + 1]); 194 195 dev->if_port = p[0] & MEDIA_MASK; 196 if (tulip_media_cap[dev->if_port] & MediaAlwaysFD) 197 tp->full_duplex = 1; 198 199 if (startup && mtable->has_reset) { 200 struct medialeaf *rleaf = &mtable->mleaf[mtable->has_reset]; 201 unsigned char *rst = rleaf->leafdata; 202 if (tulip_debug > 1) 203 netdev_dbg(dev, "Resetting the transceiver\n"); 204 for (i = 0; i < rst[0]; i++) 205 iowrite32(get_u16(rst + 1 + (i<<1)) << 16, ioaddr + CSR15); 206 } 207 if (tulip_debug > 1) 208 netdev_dbg(dev, "21143 non-MII %s transceiver control %04x/%04x\n", 209 medianame[dev->if_port], 210 setup[0], setup[1]); 211 if (p[0] & 0x40) { /* SIA (CSR13-15) setup values are provided. */ 212 csr13val = setup[0]; 213 csr14val = setup[1]; 214 csr15dir = (setup[3]<<16) | setup[2]; 215 csr15val = (setup[4]<<16) | setup[2]; 216 iowrite32(0, ioaddr + CSR13); 217 iowrite32(csr14val, ioaddr + CSR14); 218 iowrite32(csr15dir, ioaddr + CSR15); /* Direction */ 219 iowrite32(csr15val, ioaddr + CSR15); /* Data */ 220 iowrite32(csr13val, ioaddr + CSR13); 221 } else { 222 csr13val = 1; 223 csr14val = 0; 224 csr15dir = (setup[0]<<16) | 0x0008; 225 csr15val = (setup[1]<<16) | 0x0008; 226 if (dev->if_port <= 4) 227 csr14val = t21142_csr14[dev->if_port]; 228 if (startup) { 229 iowrite32(0, ioaddr + CSR13); 230 iowrite32(csr14val, ioaddr + CSR14); 231 } 232 iowrite32(csr15dir, ioaddr + CSR15); /* Direction */ 233 iowrite32(csr15val, ioaddr + CSR15); /* Data */ 234 if (startup) iowrite32(csr13val, ioaddr + CSR13); 235 } 236 if (tulip_debug > 1) 237 netdev_dbg(dev, "Setting CSR15 to %08x/%08x\n", 238 csr15dir, csr15val); 239 if (mleaf->type == 4) 240 new_csr6 = 0x82020000 | ((setup[2] & 0x71) << 18); 241 else 242 new_csr6 = 0x82420000; 243 break; 244 } 245 case 1: case 3: { 246 int phy_num = p[0]; 247 int init_length = p[1]; 248 u16 *misc_info, tmp_info; 249 250 dev->if_port = 11; 251 new_csr6 = 0x020E0000; 252 if (mleaf->type == 3) { /* 21142 */ 253 u16 *init_sequence = (u16*)(p+2); 254 u16 *reset_sequence = &((u16*)(p+3))[init_length]; 255 int reset_length = p[2 + init_length*2]; 256 misc_info = reset_sequence + reset_length; 257 if (startup) { 258 int timeout = 10; /* max 1 ms */ 259 for (i = 0; i < reset_length; i++) 260 iowrite32(get_u16(&reset_sequence[i]) << 16, ioaddr + CSR15); 261 262 /* flush posted writes */ 263 ioread32(ioaddr + CSR15); 264 265 /* Sect 3.10.3 in DP83840A.pdf (p39) */ 266 udelay(500); 267 268 /* Section 4.2 in DP83840A.pdf (p43) */ 269 /* and IEEE 802.3 "22.2.4.1.1 Reset" */ 270 while (timeout-- && 271 (tulip_mdio_read (dev, phy_num, MII_BMCR) & BMCR_RESET)) 272 udelay(100); 273 } 274 for (i = 0; i < init_length; i++) 275 iowrite32(get_u16(&init_sequence[i]) << 16, ioaddr + CSR15); 276 277 ioread32(ioaddr + CSR15); /* flush posted writes */ 278 } else { 279 u8 *init_sequence = p + 2; 280 u8 *reset_sequence = p + 3 + init_length; 281 int reset_length = p[2 + init_length]; 282 misc_info = (u16*)(reset_sequence + reset_length); 283 if (startup) { 284 int timeout = 10; /* max 1 ms */ 285 iowrite32(mtable->csr12dir | 0x100, ioaddr + CSR12); 286 for (i = 0; i < reset_length; i++) 287 iowrite32(reset_sequence[i], ioaddr + CSR12); 288 289 /* flush posted writes */ 290 ioread32(ioaddr + CSR12); 291 292 /* Sect 3.10.3 in DP83840A.pdf (p39) */ 293 udelay(500); 294 295 /* Section 4.2 in DP83840A.pdf (p43) */ 296 /* and IEEE 802.3 "22.2.4.1.1 Reset" */ 297 while (timeout-- && 298 (tulip_mdio_read (dev, phy_num, MII_BMCR) & BMCR_RESET)) 299 udelay(100); 300 } 301 for (i = 0; i < init_length; i++) 302 iowrite32(init_sequence[i], ioaddr + CSR12); 303 304 ioread32(ioaddr + CSR12); /* flush posted writes */ 305 } 306 307 tmp_info = get_u16(&misc_info[1]); 308 if (tmp_info) 309 tp->advertising[phy_num] = tmp_info | 1; 310 if (tmp_info && startup < 2) { 311 if (tp->mii_advertise == 0) 312 tp->mii_advertise = tp->advertising[phy_num]; 313 if (tulip_debug > 1) 314 netdev_dbg(dev, " Advertising %04x on MII %d\n", 315 tp->mii_advertise, 316 tp->phys[phy_num]); 317 tulip_mdio_write(dev, tp->phys[phy_num], 4, tp->mii_advertise); 318 } 319 break; 320 } 321 case 5: case 6: { 322 new_csr6 = 0; /* FIXME */ 323 324 if (startup && mtable->has_reset) { 325 struct medialeaf *rleaf = &mtable->mleaf[mtable->has_reset]; 326 unsigned char *rst = rleaf->leafdata; 327 if (tulip_debug > 1) 328 netdev_dbg(dev, "Resetting the transceiver\n"); 329 for (i = 0; i < rst[0]; i++) 330 iowrite32(get_u16(rst + 1 + (i<<1)) << 16, ioaddr + CSR15); 331 } 332 333 break; 334 } 335 default: 336 netdev_dbg(dev, " Invalid media table selection %d\n", 337 mleaf->type); 338 new_csr6 = 0x020E0000; 339 } 340 if (tulip_debug > 1) 341 netdev_dbg(dev, "Using media type %s, CSR12 is %02x\n", 342 medianame[dev->if_port], 343 ioread32(ioaddr + CSR12) & 0xff); 344 } else if (tp->chip_id == LC82C168) { 345 if (startup && ! tp->medialock) 346 dev->if_port = tp->mii_cnt ? 11 : 0; 347 if (tulip_debug > 1) 348 netdev_dbg(dev, "PNIC PHY status is %3.3x, media %s\n", 349 ioread32(ioaddr + 0xB8), 350 medianame[dev->if_port]); 351 if (tp->mii_cnt) { 352 new_csr6 = 0x810C0000; 353 iowrite32(0x0001, ioaddr + CSR15); 354 iowrite32(0x0201B07A, ioaddr + 0xB8); 355 } else if (startup) { 356 /* Start with 10mbps to do autonegotiation. */ 357 iowrite32(0x32, ioaddr + CSR12); 358 new_csr6 = 0x00420000; 359 iowrite32(0x0001B078, ioaddr + 0xB8); 360 iowrite32(0x0201B078, ioaddr + 0xB8); 361 } else if (dev->if_port == 3 || dev->if_port == 5) { 362 iowrite32(0x33, ioaddr + CSR12); 363 new_csr6 = 0x01860000; 364 /* Trigger autonegotiation. */ 365 iowrite32(0x0001F868, ioaddr + 0xB8); 366 } else { 367 iowrite32(0x32, ioaddr + CSR12); 368 new_csr6 = 0x00420000; 369 iowrite32(0x1F078, ioaddr + 0xB8); 370 } 371 } else { /* Unknown chip type with no media table. */ 372 if (tp->default_port == 0) 373 dev->if_port = tp->mii_cnt ? 11 : 3; 374 if (tulip_media_cap[dev->if_port] & MediaIsMII) { 375 new_csr6 = 0x020E0000; 376 } else if (tulip_media_cap[dev->if_port] & MediaIsFx) { 377 new_csr6 = 0x02860000; 378 } else 379 new_csr6 = 0x03860000; 380 if (tulip_debug > 1) 381 netdev_dbg(dev, "No media description table, assuming %s transceiver, CSR12 %02x\n", 382 medianame[dev->if_port], 383 ioread32(ioaddr + CSR12)); 384 } 385 386 tp->csr6 = new_csr6 | (tp->csr6 & 0xfdff) | (tp->full_duplex ? 0x0200 : 0); 387 388 mdelay(1); 389 } 390 391 /* 392 Check the MII negotiated duplex and change the CSR6 setting if 393 required. 394 Return 0 if everything is OK. 395 Return < 0 if the transceiver is missing or has no link beat. 396 */ tulip_check_duplex(struct net_device * dev)397 int tulip_check_duplex(struct net_device *dev) 398 { 399 struct tulip_private *tp = netdev_priv(dev); 400 unsigned int bmsr, lpa, negotiated, new_csr6; 401 402 bmsr = tulip_mdio_read(dev, tp->phys[0], MII_BMSR); 403 lpa = tulip_mdio_read(dev, tp->phys[0], MII_LPA); 404 if (tulip_debug > 1) 405 dev_info(&dev->dev, "MII status %04x, Link partner report %04x\n", 406 bmsr, lpa); 407 if (bmsr == 0xffff) 408 return -2; 409 if ((bmsr & BMSR_LSTATUS) == 0) { 410 int new_bmsr = tulip_mdio_read(dev, tp->phys[0], MII_BMSR); 411 if ((new_bmsr & BMSR_LSTATUS) == 0) { 412 if (tulip_debug > 1) 413 dev_info(&dev->dev, 414 "No link beat on the MII interface, status %04x\n", 415 new_bmsr); 416 return -1; 417 } 418 } 419 negotiated = lpa & tp->advertising[0]; 420 tp->full_duplex = mii_duplex(tp->full_duplex_lock, negotiated); 421 422 new_csr6 = tp->csr6; 423 424 if (negotiated & LPA_100) new_csr6 &= ~TxThreshold; 425 else new_csr6 |= TxThreshold; 426 if (tp->full_duplex) new_csr6 |= FullDuplex; 427 else new_csr6 &= ~FullDuplex; 428 429 if (new_csr6 != tp->csr6) { 430 tp->csr6 = new_csr6; 431 tulip_restart_rxtx(tp); 432 433 if (tulip_debug > 0) 434 dev_info(&dev->dev, 435 "Setting %s-duplex based on MII#%d link partner capability of %04x\n", 436 tp->full_duplex ? "full" : "half", 437 tp->phys[0], lpa); 438 return 1; 439 } 440 441 return 0; 442 } 443 tulip_find_mii(struct net_device * dev,int board_idx)444 void tulip_find_mii(struct net_device *dev, int board_idx) 445 { 446 struct tulip_private *tp = netdev_priv(dev); 447 int phyn, phy_idx = 0; 448 int mii_reg0; 449 int mii_advert; 450 unsigned int to_advert, new_bmcr, ane_switch; 451 452 /* Find the connected MII xcvrs. 453 Doing this in open() would allow detecting external xcvrs later, 454 but takes much time. */ 455 for (phyn = 1; phyn <= 32 && phy_idx < ARRAY_SIZE(tp->phys); phyn++) { 456 int phy = phyn & 0x1f; 457 int mii_status = tulip_mdio_read (dev, phy, MII_BMSR); 458 if ((mii_status & 0x8301) == 0x8001 || 459 ((mii_status & BMSR_100BASE4) == 0 && 460 (mii_status & 0x7800) != 0)) { 461 /* preserve Becker logic, gain indentation level */ 462 } else { 463 continue; 464 } 465 466 mii_reg0 = tulip_mdio_read (dev, phy, MII_BMCR); 467 mii_advert = tulip_mdio_read (dev, phy, MII_ADVERTISE); 468 ane_switch = 0; 469 470 /* if not advertising at all, gen an 471 * advertising value from the capability 472 * bits in BMSR 473 */ 474 if ((mii_advert & ADVERTISE_ALL) == 0) { 475 unsigned int tmpadv = tulip_mdio_read (dev, phy, MII_BMSR); 476 mii_advert = ((tmpadv >> 6) & 0x3e0) | 1; 477 } 478 479 if (tp->mii_advertise) { 480 tp->advertising[phy_idx] = 481 to_advert = tp->mii_advertise; 482 } else if (tp->advertising[phy_idx]) { 483 to_advert = tp->advertising[phy_idx]; 484 } else { 485 tp->advertising[phy_idx] = 486 tp->mii_advertise = 487 to_advert = mii_advert; 488 } 489 490 tp->phys[phy_idx++] = phy; 491 492 pr_info("tulip%d: MII transceiver #%d config %04x status %04x advertising %04x\n", 493 board_idx, phy, mii_reg0, mii_status, mii_advert); 494 495 /* Fixup for DLink with miswired PHY. */ 496 if (mii_advert != to_advert) { 497 pr_debug("tulip%d: Advertising %04x on PHY %d, previously advertising %04x\n", 498 board_idx, to_advert, phy, mii_advert); 499 tulip_mdio_write (dev, phy, 4, to_advert); 500 } 501 502 /* Enable autonegotiation: some boards default to off. */ 503 if (tp->default_port == 0) { 504 new_bmcr = mii_reg0 | BMCR_ANENABLE; 505 if (new_bmcr != mii_reg0) { 506 new_bmcr |= BMCR_ANRESTART; 507 ane_switch = 1; 508 } 509 } 510 /* ...or disable nway, if forcing media */ 511 else { 512 new_bmcr = mii_reg0 & ~BMCR_ANENABLE; 513 if (new_bmcr != mii_reg0) 514 ane_switch = 1; 515 } 516 517 /* clear out bits we never want at this point */ 518 new_bmcr &= ~(BMCR_CTST | BMCR_FULLDPLX | BMCR_ISOLATE | 519 BMCR_PDOWN | BMCR_SPEED100 | BMCR_LOOPBACK | 520 BMCR_RESET); 521 522 if (tp->full_duplex) 523 new_bmcr |= BMCR_FULLDPLX; 524 if (tulip_media_cap[tp->default_port] & MediaIs100) 525 new_bmcr |= BMCR_SPEED100; 526 527 if (new_bmcr != mii_reg0) { 528 /* some phys need the ANE switch to 529 * happen before forced media settings 530 * will "take." However, we write the 531 * same value twice in order not to 532 * confuse the sane phys. 533 */ 534 if (ane_switch) { 535 tulip_mdio_write (dev, phy, MII_BMCR, new_bmcr); 536 udelay (10); 537 } 538 tulip_mdio_write (dev, phy, MII_BMCR, new_bmcr); 539 } 540 } 541 tp->mii_cnt = phy_idx; 542 if (tp->mtable && tp->mtable->has_mii && phy_idx == 0) { 543 pr_info("tulip%d: ***WARNING***: No MII transceiver found!\n", 544 board_idx); 545 tp->phys[0] = 1; 546 } 547 } 548