1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Copyright (C) 2005-2007 by Texas Instruments
4 * Some code has been taken from tusb6010.c
5 * Copyrights for that are attributable to:
6 * Copyright (C) 2006 Nokia Corporation
7 * Tony Lindgren <tony@atomide.com>
8 *
9 * This file is part of the Inventra Controller Driver for Linux.
10 */
11 #include <linux/module.h>
12 #include <linux/kernel.h>
13 #include <linux/sched.h>
14 #include <linux/init.h>
15 #include <linux/list.h>
16 #include <linux/io.h>
17 #include <linux/of.h>
18 #include <linux/of_irq.h>
19 #include <linux/platform_device.h>
20 #include <linux/dma-mapping.h>
21 #include <linux/pm_runtime.h>
22 #include <linux/err.h>
23 #include <linux/delay.h>
24 #include <linux/usb/musb.h>
25 #include <linux/phy/omap_control_phy.h>
26 #include <linux/of_platform.h>
27
28 #include "musb_core.h"
29 #include "omap2430.h"
30
31 struct omap2430_glue {
32 struct device *dev;
33 struct platform_device *musb;
34 enum musb_vbus_id_status status;
35 struct work_struct omap_musb_mailbox_work;
36 struct device *control_otghs;
37 unsigned int is_runtime_suspended:1;
38 unsigned int needs_resume:1;
39 unsigned int phy_suspended:1;
40 };
41 #define glue_to_musb(g) platform_get_drvdata(g->musb)
42
43 static struct omap2430_glue *_glue;
44
omap2430_low_level_exit(struct musb * musb)45 static inline void omap2430_low_level_exit(struct musb *musb)
46 {
47 u32 l;
48
49 /* in any role */
50 l = musb_readl(musb->mregs, OTG_FORCESTDBY);
51 l |= ENABLEFORCE; /* enable MSTANDBY */
52 musb_writel(musb->mregs, OTG_FORCESTDBY, l);
53 }
54
omap2430_low_level_init(struct musb * musb)55 static inline void omap2430_low_level_init(struct musb *musb)
56 {
57 u32 l;
58
59 l = musb_readl(musb->mregs, OTG_FORCESTDBY);
60 l &= ~ENABLEFORCE; /* disable MSTANDBY */
61 musb_writel(musb->mregs, OTG_FORCESTDBY, l);
62 }
63
omap2430_musb_mailbox(enum musb_vbus_id_status status)64 static int omap2430_musb_mailbox(enum musb_vbus_id_status status)
65 {
66 struct omap2430_glue *glue = _glue;
67
68 if (!glue) {
69 pr_err("%s: musb core is not yet initialized\n", __func__);
70 return -EPROBE_DEFER;
71 }
72 glue->status = status;
73
74 if (!glue_to_musb(glue)) {
75 pr_err("%s: musb core is not yet ready\n", __func__);
76 return -EPROBE_DEFER;
77 }
78
79 schedule_work(&glue->omap_musb_mailbox_work);
80
81 return 0;
82 }
83
84 /*
85 * HDRC controls CPEN, but beware current surges during device connect.
86 * They can trigger transient overcurrent conditions that must be ignored.
87 *
88 * Note that we're skipping A_WAIT_VFALL -> A_IDLE and jumping right to B_IDLE
89 * as set by musb_set_peripheral().
90 */
omap_musb_set_mailbox(struct omap2430_glue * glue)91 static void omap_musb_set_mailbox(struct omap2430_glue *glue)
92 {
93 struct musb *musb = glue_to_musb(glue);
94 int error;
95
96 pm_runtime_get_sync(musb->controller);
97
98 dev_dbg(musb->controller, "VBUS %s, devctl %02x\n",
99 usb_otg_state_string(musb->xceiv->otg->state),
100 musb_readb(musb->mregs, MUSB_DEVCTL));
101
102 switch (glue->status) {
103 case MUSB_ID_GROUND:
104 dev_dbg(musb->controller, "ID GND\n");
105 switch (musb->xceiv->otg->state) {
106 case OTG_STATE_A_IDLE:
107 error = musb_set_host(musb);
108 if (error)
109 break;
110 musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
111 fallthrough;
112 case OTG_STATE_A_WAIT_VRISE:
113 case OTG_STATE_A_WAIT_BCON:
114 case OTG_STATE_A_HOST:
115 /*
116 * On multiple ID ground interrupts just keep enabling
117 * VBUS. At least cpcap VBUS shuts down otherwise.
118 */
119 otg_set_vbus(musb->xceiv->otg, 1);
120 break;
121 default:
122 musb->xceiv->otg->state = OTG_STATE_A_IDLE;
123 musb->xceiv->last_event = USB_EVENT_ID;
124 if (musb->gadget_driver) {
125 omap_control_usb_set_mode(glue->control_otghs,
126 USB_MODE_HOST);
127 otg_set_vbus(musb->xceiv->otg, 1);
128 }
129 break;
130 }
131 break;
132
133 case MUSB_VBUS_VALID:
134 dev_dbg(musb->controller, "VBUS Connect\n");
135
136 musb->xceiv->otg->state = OTG_STATE_B_IDLE;
137 musb->xceiv->last_event = USB_EVENT_VBUS;
138 omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE);
139 break;
140
141 case MUSB_ID_FLOAT:
142 case MUSB_VBUS_OFF:
143 dev_dbg(musb->controller, "VBUS Disconnect\n");
144
145 musb->xceiv->last_event = USB_EVENT_NONE;
146 musb_set_peripheral(musb);
147 otg_set_vbus(musb->xceiv->otg, 0);
148 omap_control_usb_set_mode(glue->control_otghs,
149 USB_MODE_DISCONNECT);
150 break;
151 default:
152 dev_dbg(musb->controller, "ID float\n");
153 }
154 pm_runtime_mark_last_busy(musb->controller);
155 pm_runtime_put_autosuspend(musb->controller);
156 atomic_notifier_call_chain(&musb->xceiv->notifier,
157 musb->xceiv->last_event, NULL);
158 }
159
160
omap_musb_mailbox_work(struct work_struct * mailbox_work)161 static void omap_musb_mailbox_work(struct work_struct *mailbox_work)
162 {
163 struct omap2430_glue *glue = container_of(mailbox_work,
164 struct omap2430_glue, omap_musb_mailbox_work);
165
166 omap_musb_set_mailbox(glue);
167 }
168
omap2430_musb_interrupt(int irq,void * __hci)169 static irqreturn_t omap2430_musb_interrupt(int irq, void *__hci)
170 {
171 unsigned long flags;
172 irqreturn_t retval = IRQ_NONE;
173 struct musb *musb = __hci;
174
175 spin_lock_irqsave(&musb->lock, flags);
176
177 musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
178 musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
179 musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
180
181 if (musb->int_usb || musb->int_tx || musb->int_rx)
182 retval = musb_interrupt(musb);
183
184 spin_unlock_irqrestore(&musb->lock, flags);
185
186 return retval;
187 }
188
omap2430_musb_init(struct musb * musb)189 static int omap2430_musb_init(struct musb *musb)
190 {
191 u32 l;
192 int status = 0;
193 struct device *dev = musb->controller;
194 struct musb_hdrc_platform_data *plat = dev_get_platdata(dev);
195 struct omap_musb_board_data *data = plat->board_data;
196
197 /* We require some kind of external transceiver, hooked
198 * up through ULPI. TWL4030-family PMICs include one,
199 * which needs a driver, drivers aren't always needed.
200 */
201 musb->phy = devm_phy_get(dev->parent, "usb2-phy");
202
203 /* We can't totally remove musb->xceiv as of now because
204 * musb core uses xceiv.state and xceiv.otg. Once we have
205 * a separate state machine to handle otg, these can be moved
206 * out of xceiv and then we can start using the generic PHY
207 * framework
208 */
209 musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent, "usb-phy", 0);
210
211 if (IS_ERR(musb->xceiv)) {
212 status = PTR_ERR(musb->xceiv);
213
214 if (status == -ENXIO)
215 return status;
216
217 dev_dbg(dev, "HS USB OTG: no transceiver configured\n");
218 return -EPROBE_DEFER;
219 }
220
221 if (IS_ERR(musb->phy)) {
222 dev_err(dev, "HS USB OTG: no PHY configured\n");
223 return PTR_ERR(musb->phy);
224 }
225 musb->isr = omap2430_musb_interrupt;
226 phy_init(musb->phy);
227 phy_power_on(musb->phy);
228
229 l = musb_readl(musb->mregs, OTG_INTERFSEL);
230
231 if (data->interface_type == MUSB_INTERFACE_UTMI) {
232 /* OMAP4 uses Internal PHY GS70 which uses UTMI interface */
233 l &= ~ULPI_12PIN; /* Disable ULPI */
234 l |= UTMI_8BIT; /* Enable UTMI */
235 } else {
236 l |= ULPI_12PIN;
237 }
238
239 musb_writel(musb->mregs, OTG_INTERFSEL, l);
240
241 dev_dbg(dev, "HS USB OTG: revision 0x%x, sysconfig 0x%02x, "
242 "sysstatus 0x%x, intrfsel 0x%x, simenable 0x%x\n",
243 musb_readl(musb->mregs, OTG_REVISION),
244 musb_readl(musb->mregs, OTG_SYSCONFIG),
245 musb_readl(musb->mregs, OTG_SYSSTATUS),
246 musb_readl(musb->mregs, OTG_INTERFSEL),
247 musb_readl(musb->mregs, OTG_SIMENABLE));
248
249 return 0;
250 }
251
omap2430_musb_enable(struct musb * musb)252 static void omap2430_musb_enable(struct musb *musb)
253 {
254 struct device *dev = musb->controller;
255 struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
256
257 if (glue->status == MUSB_UNKNOWN)
258 glue->status = MUSB_VBUS_OFF;
259 omap_musb_set_mailbox(glue);
260 }
261
omap2430_musb_disable(struct musb * musb)262 static void omap2430_musb_disable(struct musb *musb)
263 {
264 struct device *dev = musb->controller;
265 struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
266
267 if (glue->status != MUSB_UNKNOWN)
268 omap_control_usb_set_mode(glue->control_otghs,
269 USB_MODE_DISCONNECT);
270 }
271
omap2430_musb_exit(struct musb * musb)272 static int omap2430_musb_exit(struct musb *musb)
273 {
274 struct device *dev = musb->controller;
275 struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
276
277 omap2430_low_level_exit(musb);
278 phy_power_off(musb->phy);
279 phy_exit(musb->phy);
280 musb->phy = NULL;
281 cancel_work_sync(&glue->omap_musb_mailbox_work);
282
283 return 0;
284 }
285
286 static const struct musb_platform_ops omap2430_ops = {
287 .quirks = MUSB_DMA_INVENTRA,
288 #ifdef CONFIG_USB_INVENTRA_DMA
289 .dma_init = musbhs_dma_controller_create,
290 .dma_exit = musbhs_dma_controller_destroy,
291 #endif
292 .init = omap2430_musb_init,
293 .exit = omap2430_musb_exit,
294
295 .enable = omap2430_musb_enable,
296 .disable = omap2430_musb_disable,
297
298 .phy_callback = omap2430_musb_mailbox,
299 };
300
301 static u64 omap2430_dmamask = DMA_BIT_MASK(32);
302
omap2430_probe(struct platform_device * pdev)303 static int omap2430_probe(struct platform_device *pdev)
304 {
305 struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev);
306 struct omap_musb_board_data *data;
307 struct platform_device *musb;
308 struct omap2430_glue *glue;
309 struct device_node *np = pdev->dev.of_node;
310 struct musb_hdrc_config *config;
311 struct device_node *control_node;
312 struct platform_device *control_pdev;
313 int ret = -ENOMEM, val;
314 bool populate_irqs = false;
315
316 if (!np)
317 return -ENODEV;
318
319 glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
320 if (!glue)
321 goto err0;
322
323 musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
324 if (!musb) {
325 dev_err(&pdev->dev, "failed to allocate musb device\n");
326 goto err0;
327 }
328
329 musb->dev.parent = &pdev->dev;
330 musb->dev.dma_mask = &omap2430_dmamask;
331 musb->dev.coherent_dma_mask = omap2430_dmamask;
332
333 /*
334 * Legacy SoCs using omap_device get confused if node is moved
335 * because of interconnect properties mixed into the node.
336 */
337 if (of_property_present(np, "ti,hwmods")) {
338 dev_warn(&pdev->dev, "please update to probe with ti-sysc\n");
339 populate_irqs = true;
340 } else {
341 device_set_of_node_from_dev(&musb->dev, &pdev->dev);
342 }
343 of_node_put(np);
344
345 glue->dev = &pdev->dev;
346 glue->musb = musb;
347 glue->status = MUSB_UNKNOWN;
348 glue->control_otghs = ERR_PTR(-ENODEV);
349
350 pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
351 if (!pdata)
352 goto err2;
353
354 data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
355 if (!data)
356 goto err2;
357
358 config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL);
359 if (!config)
360 goto err2;
361
362 of_property_read_u32(np, "mode", (u32 *)&pdata->mode);
363 of_property_read_u32(np, "interface-type",
364 (u32 *)&data->interface_type);
365 of_property_read_u32(np, "num-eps", (u32 *)&config->num_eps);
366 of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits);
367 of_property_read_u32(np, "power", (u32 *)&pdata->power);
368
369 ret = of_property_read_u32(np, "multipoint", &val);
370 if (!ret && val)
371 config->multipoint = true;
372
373 pdata->board_data = data;
374 pdata->config = config;
375
376 control_node = of_parse_phandle(np, "ctrl-module", 0);
377 if (control_node) {
378 control_pdev = of_find_device_by_node(control_node);
379 of_node_put(control_node);
380 if (!control_pdev) {
381 dev_err(&pdev->dev, "Failed to get control device\n");
382 ret = -EINVAL;
383 goto err2;
384 }
385 glue->control_otghs = &control_pdev->dev;
386 }
387
388 pdata->platform_ops = &omap2430_ops;
389
390 platform_set_drvdata(pdev, glue);
391
392 /*
393 * REVISIT if we ever have two instances of the wrapper, we will be
394 * in big trouble
395 */
396 _glue = glue;
397
398 INIT_WORK(&glue->omap_musb_mailbox_work, omap_musb_mailbox_work);
399
400 ret = platform_device_add_resources(musb, pdev->resource, pdev->num_resources);
401 if (ret) {
402 dev_err(&pdev->dev, "failed to add resources\n");
403 goto err2;
404 }
405
406 if (populate_irqs) {
407 struct resource musb_res[3];
408 struct resource *res;
409 int i = 0;
410
411 memset(musb_res, 0, sizeof(*musb_res) * ARRAY_SIZE(musb_res));
412
413 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
414 if (!res) {
415 ret = -EINVAL;
416 goto err2;
417 }
418
419 musb_res[i].start = res->start;
420 musb_res[i].end = res->end;
421 musb_res[i].flags = res->flags;
422 musb_res[i].name = res->name;
423 i++;
424
425 ret = of_irq_get_byname(np, "mc");
426 if (ret > 0) {
427 musb_res[i].start = ret;
428 musb_res[i].flags = IORESOURCE_IRQ;
429 musb_res[i].name = "mc";
430 i++;
431 }
432
433 ret = of_irq_get_byname(np, "dma");
434 if (ret > 0) {
435 musb_res[i].start = ret;
436 musb_res[i].flags = IORESOURCE_IRQ;
437 musb_res[i].name = "dma";
438 i++;
439 }
440
441 ret = platform_device_add_resources(musb, musb_res, i);
442 if (ret) {
443 dev_err(&pdev->dev, "failed to add IRQ resources\n");
444 goto err2;
445 }
446 }
447
448 ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
449 if (ret) {
450 dev_err(&pdev->dev, "failed to add platform_data\n");
451 goto err2;
452 }
453
454 pm_runtime_enable(glue->dev);
455
456 ret = platform_device_add(musb);
457 if (ret) {
458 dev_err(&pdev->dev, "failed to register musb device\n");
459 goto err3;
460 }
461
462 return 0;
463
464 err3:
465 pm_runtime_disable(glue->dev);
466
467 err2:
468 platform_device_put(musb);
469
470 err0:
471 return ret;
472 }
473
omap2430_remove(struct platform_device * pdev)474 static void omap2430_remove(struct platform_device *pdev)
475 {
476 struct omap2430_glue *glue = platform_get_drvdata(pdev);
477
478 platform_device_unregister(glue->musb);
479 pm_runtime_disable(glue->dev);
480 }
481
482 #ifdef CONFIG_PM
483
omap2430_runtime_suspend(struct device * dev)484 static int omap2430_runtime_suspend(struct device *dev)
485 {
486 struct omap2430_glue *glue = dev_get_drvdata(dev);
487 struct musb *musb = glue_to_musb(glue);
488
489 if (!musb)
490 return 0;
491
492 musb->context.otg_interfsel = musb_readl(musb->mregs,
493 OTG_INTERFSEL);
494
495 omap2430_low_level_exit(musb);
496
497 if (!glue->phy_suspended) {
498 phy_power_off(musb->phy);
499 phy_exit(musb->phy);
500 }
501
502 glue->is_runtime_suspended = 1;
503
504 return 0;
505 }
506
omap2430_runtime_resume(struct device * dev)507 static int omap2430_runtime_resume(struct device *dev)
508 {
509 struct omap2430_glue *glue = dev_get_drvdata(dev);
510 struct musb *musb = glue_to_musb(glue);
511
512 if (!musb)
513 return 0;
514
515 if (!glue->phy_suspended) {
516 phy_init(musb->phy);
517 phy_power_on(musb->phy);
518 }
519
520 omap2430_low_level_init(musb);
521 musb_writel(musb->mregs, OTG_INTERFSEL,
522 musb->context.otg_interfsel);
523
524 /* Wait for musb to get oriented. Otherwise we can get babble */
525 usleep_range(200000, 250000);
526
527 glue->is_runtime_suspended = 0;
528
529 return 0;
530 }
531
532 /* I2C and SPI PHYs need to be suspended before the glue layer */
omap2430_suspend(struct device * dev)533 static int omap2430_suspend(struct device *dev)
534 {
535 struct omap2430_glue *glue = dev_get_drvdata(dev);
536 struct musb *musb = glue_to_musb(glue);
537
538 phy_power_off(musb->phy);
539 phy_exit(musb->phy);
540 glue->phy_suspended = 1;
541
542 return 0;
543 }
544
545 /* Glue layer needs to be suspended after musb_suspend() */
omap2430_suspend_late(struct device * dev)546 static int omap2430_suspend_late(struct device *dev)
547 {
548 struct omap2430_glue *glue = dev_get_drvdata(dev);
549
550 if (glue->is_runtime_suspended)
551 return 0;
552
553 glue->needs_resume = 1;
554
555 return omap2430_runtime_suspend(dev);
556 }
557
omap2430_resume_early(struct device * dev)558 static int omap2430_resume_early(struct device *dev)
559 {
560 struct omap2430_glue *glue = dev_get_drvdata(dev);
561
562 if (!glue->needs_resume)
563 return 0;
564
565 glue->needs_resume = 0;
566
567 return omap2430_runtime_resume(dev);
568 }
569
omap2430_resume(struct device * dev)570 static int omap2430_resume(struct device *dev)
571 {
572 struct omap2430_glue *glue = dev_get_drvdata(dev);
573 struct musb *musb = glue_to_musb(glue);
574
575 phy_init(musb->phy);
576 phy_power_on(musb->phy);
577 glue->phy_suspended = 0;
578
579 return 0;
580 }
581
582 static const struct dev_pm_ops omap2430_pm_ops = {
583 .runtime_suspend = omap2430_runtime_suspend,
584 .runtime_resume = omap2430_runtime_resume,
585 .suspend = omap2430_suspend,
586 .suspend_late = omap2430_suspend_late,
587 .resume_early = omap2430_resume_early,
588 .resume = omap2430_resume,
589 };
590
591 #define DEV_PM_OPS (&omap2430_pm_ops)
592 #else
593 #define DEV_PM_OPS NULL
594 #endif
595
596 #ifdef CONFIG_OF
597 static const struct of_device_id omap2430_id_table[] = {
598 {
599 .compatible = "ti,omap4-musb"
600 },
601 {
602 .compatible = "ti,omap3-musb"
603 },
604 {},
605 };
606 MODULE_DEVICE_TABLE(of, omap2430_id_table);
607 #endif
608
609 static struct platform_driver omap2430_driver = {
610 .probe = omap2430_probe,
611 .remove_new = omap2430_remove,
612 .driver = {
613 .name = "musb-omap2430",
614 .pm = DEV_PM_OPS,
615 .of_match_table = of_match_ptr(omap2430_id_table),
616 },
617 };
618
619 module_platform_driver(omap2430_driver);
620
621 MODULE_DESCRIPTION("OMAP2PLUS MUSB Glue Layer");
622 MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
623 MODULE_LICENSE("GPL v2");
624