1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * i2c driver for Freescale i.MX series
4 *
5 * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
6 * (c) 2011 Marek Vasut <marek.vasut@gmail.com>
7 *
8 * Based on i2c-imx.c from linux kernel:
9 * Copyright (C) 2005 Torsten Koschorrek <koschorrek at synertronixx.de>
10 * Copyright (C) 2005 Matthias Blaschke <blaschke at synertronixx.de>
11 * Copyright (C) 2007 RightHand Technologies, Inc.
12 * Copyright (C) 2008 Darius Augulis <darius.augulis at teltonika.lt>
13 *
14 */
15
16 #include <common.h>
17 #include <asm/arch/clock.h>
18 #include <asm/arch/imx-regs.h>
19 #include <linux/errno.h>
20 #include <asm/mach-imx/mxc_i2c.h>
21 #include <asm/io.h>
22 #include <i2c.h>
23 #include <watchdog.h>
24 #include <dm.h>
25 #include <dm/pinctrl.h>
26 #include <fdtdec.h>
27
28 DECLARE_GLOBAL_DATA_PTR;
29
30 #define I2C_QUIRK_FLAG (1 << 0)
31
32 #define IMX_I2C_REGSHIFT 2
33 #define VF610_I2C_REGSHIFT 0
34
35 #define I2C_EARLY_INIT_INDEX 0
36 #ifdef CONFIG_SYS_I2C_IFDR_DIV
37 #define I2C_IFDR_DIV_CONSERVATIVE CONFIG_SYS_I2C_IFDR_DIV
38 #else
39 #define I2C_IFDR_DIV_CONSERVATIVE 0x7e
40 #endif
41
42 /* Register index */
43 #define IADR 0
44 #define IFDR 1
45 #define I2CR 2
46 #define I2SR 3
47 #define I2DR 4
48
49 #define I2CR_IIEN (1 << 6)
50 #define I2CR_MSTA (1 << 5)
51 #define I2CR_MTX (1 << 4)
52 #define I2CR_TX_NO_AK (1 << 3)
53 #define I2CR_RSTA (1 << 2)
54
55 #define I2SR_ICF (1 << 7)
56 #define I2SR_IBB (1 << 5)
57 #define I2SR_IAL (1 << 4)
58 #define I2SR_IIF (1 << 1)
59 #define I2SR_RX_NO_AK (1 << 0)
60
61 #ifdef I2C_QUIRK_REG
62 #define I2CR_IEN (0 << 7)
63 #define I2CR_IDIS (1 << 7)
64 #define I2SR_IIF_CLEAR (1 << 1)
65 #else
66 #define I2CR_IEN (1 << 7)
67 #define I2CR_IDIS (0 << 7)
68 #define I2SR_IIF_CLEAR (0 << 1)
69 #endif
70
71 #ifdef I2C_QUIRK_REG
72 static u16 i2c_clk_div[60][2] = {
73 { 20, 0x00 }, { 22, 0x01 }, { 24, 0x02 }, { 26, 0x03 },
74 { 28, 0x04 }, { 30, 0x05 }, { 32, 0x09 }, { 34, 0x06 },
75 { 36, 0x0A }, { 40, 0x07 }, { 44, 0x0C }, { 48, 0x0D },
76 { 52, 0x43 }, { 56, 0x0E }, { 60, 0x45 }, { 64, 0x12 },
77 { 68, 0x0F }, { 72, 0x13 }, { 80, 0x14 }, { 88, 0x15 },
78 { 96, 0x19 }, { 104, 0x16 }, { 112, 0x1A }, { 128, 0x17 },
79 { 136, 0x4F }, { 144, 0x1C }, { 160, 0x1D }, { 176, 0x55 },
80 { 192, 0x1E }, { 208, 0x56 }, { 224, 0x22 }, { 228, 0x24 },
81 { 240, 0x1F }, { 256, 0x23 }, { 288, 0x5C }, { 320, 0x25 },
82 { 384, 0x26 }, { 448, 0x2A }, { 480, 0x27 }, { 512, 0x2B },
83 { 576, 0x2C }, { 640, 0x2D }, { 768, 0x31 }, { 896, 0x32 },
84 { 960, 0x2F }, { 1024, 0x33 }, { 1152, 0x34 }, { 1280, 0x35 },
85 { 1536, 0x36 }, { 1792, 0x3A }, { 1920, 0x37 }, { 2048, 0x3B },
86 { 2304, 0x3C }, { 2560, 0x3D }, { 3072, 0x3E }, { 3584, 0x7A },
87 { 3840, 0x3F }, { 4096, 0x7B }, { 5120, 0x7D }, { 6144, 0x7E },
88 };
89 #else
90 static u16 i2c_clk_div[50][2] = {
91 { 22, 0x20 }, { 24, 0x21 }, { 26, 0x22 }, { 28, 0x23 },
92 { 30, 0x00 }, { 32, 0x24 }, { 36, 0x25 }, { 40, 0x26 },
93 { 42, 0x03 }, { 44, 0x27 }, { 48, 0x28 }, { 52, 0x05 },
94 { 56, 0x29 }, { 60, 0x06 }, { 64, 0x2A }, { 72, 0x2B },
95 { 80, 0x2C }, { 88, 0x09 }, { 96, 0x2D }, { 104, 0x0A },
96 { 112, 0x2E }, { 128, 0x2F }, { 144, 0x0C }, { 160, 0x30 },
97 { 192, 0x31 }, { 224, 0x32 }, { 240, 0x0F }, { 256, 0x33 },
98 { 288, 0x10 }, { 320, 0x34 }, { 384, 0x35 }, { 448, 0x36 },
99 { 480, 0x13 }, { 512, 0x37 }, { 576, 0x14 }, { 640, 0x38 },
100 { 768, 0x39 }, { 896, 0x3A }, { 960, 0x17 }, { 1024, 0x3B },
101 { 1152, 0x18 }, { 1280, 0x3C }, { 1536, 0x3D }, { 1792, 0x3E },
102 { 1920, 0x1B }, { 2048, 0x3F }, { 2304, 0x1C }, { 2560, 0x1D },
103 { 3072, 0x1E }, { 3840, 0x1F }
104 };
105 #endif
106
107 #ifndef CONFIG_SYS_MXC_I2C1_SPEED
108 #define CONFIG_SYS_MXC_I2C1_SPEED 100000
109 #endif
110 #ifndef CONFIG_SYS_MXC_I2C2_SPEED
111 #define CONFIG_SYS_MXC_I2C2_SPEED 100000
112 #endif
113 #ifndef CONFIG_SYS_MXC_I2C3_SPEED
114 #define CONFIG_SYS_MXC_I2C3_SPEED 100000
115 #endif
116 #ifndef CONFIG_SYS_MXC_I2C4_SPEED
117 #define CONFIG_SYS_MXC_I2C4_SPEED 100000
118 #endif
119
120 #ifndef CONFIG_SYS_MXC_I2C1_SLAVE
121 #define CONFIG_SYS_MXC_I2C1_SLAVE 0
122 #endif
123 #ifndef CONFIG_SYS_MXC_I2C2_SLAVE
124 #define CONFIG_SYS_MXC_I2C2_SLAVE 0
125 #endif
126 #ifndef CONFIG_SYS_MXC_I2C3_SLAVE
127 #define CONFIG_SYS_MXC_I2C3_SLAVE 0
128 #endif
129 #ifndef CONFIG_SYS_MXC_I2C4_SLAVE
130 #define CONFIG_SYS_MXC_I2C4_SLAVE 0
131 #endif
132
133 /*
134 * Calculate and set proper clock divider
135 */
i2c_imx_get_clk(struct mxc_i2c_bus * i2c_bus,unsigned int rate)136 static uint8_t i2c_imx_get_clk(struct mxc_i2c_bus *i2c_bus, unsigned int rate)
137 {
138 unsigned int i2c_clk_rate;
139 unsigned int div;
140 u8 clk_div;
141
142 #if defined(CONFIG_MX31)
143 struct clock_control_regs *sc_regs =
144 (struct clock_control_regs *)CCM_BASE;
145
146 /* start the required I2C clock */
147 writel(readl(&sc_regs->cgr0) | (3 << CONFIG_SYS_I2C_CLK_OFFSET),
148 &sc_regs->cgr0);
149 #endif
150
151 /* Divider value calculation */
152 i2c_clk_rate = mxc_get_clock(MXC_I2C_CLK);
153 div = (i2c_clk_rate + rate - 1) / rate;
154 if (div < i2c_clk_div[0][0])
155 clk_div = 0;
156 else if (div > i2c_clk_div[ARRAY_SIZE(i2c_clk_div) - 1][0])
157 clk_div = ARRAY_SIZE(i2c_clk_div) - 1;
158 else
159 for (clk_div = 0; i2c_clk_div[clk_div][0] < div; clk_div++)
160 ;
161
162 /* Store divider value */
163 return clk_div;
164 }
165
166 /*
167 * Set I2C Bus speed
168 */
bus_i2c_set_bus_speed(struct mxc_i2c_bus * i2c_bus,int speed)169 static int bus_i2c_set_bus_speed(struct mxc_i2c_bus *i2c_bus, int speed)
170 {
171 ulong base = i2c_bus->base;
172 bool quirk = i2c_bus->driver_data & I2C_QUIRK_FLAG ? true : false;
173 u8 clk_idx = i2c_imx_get_clk(i2c_bus, speed);
174 u8 idx = i2c_clk_div[clk_idx][1];
175 int reg_shift = quirk ? VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT;
176
177 if (!base)
178 return -EINVAL;
179
180 /* Store divider value */
181 writeb(idx, base + (IFDR << reg_shift));
182
183 /* Reset module */
184 writeb(I2CR_IDIS, base + (I2CR << reg_shift));
185 writeb(0, base + (I2SR << reg_shift));
186 return 0;
187 }
188
189 #define ST_BUS_IDLE (0 | (I2SR_IBB << 8))
190 #define ST_BUS_BUSY (I2SR_IBB | (I2SR_IBB << 8))
191 #define ST_IIF (I2SR_IIF | (I2SR_IIF << 8))
192
wait_for_sr_state(struct mxc_i2c_bus * i2c_bus,unsigned state)193 static int wait_for_sr_state(struct mxc_i2c_bus *i2c_bus, unsigned state)
194 {
195 unsigned sr;
196 ulong elapsed;
197 bool quirk = i2c_bus->driver_data & I2C_QUIRK_FLAG ? true : false;
198 int reg_shift = quirk ? VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT;
199 ulong base = i2c_bus->base;
200 ulong start_time = get_timer(0);
201 for (;;) {
202 sr = readb(base + (I2SR << reg_shift));
203 if (sr & I2SR_IAL) {
204 if (quirk)
205 writeb(sr | I2SR_IAL, base +
206 (I2SR << reg_shift));
207 else
208 writeb(sr & ~I2SR_IAL, base +
209 (I2SR << reg_shift));
210 printf("%s: Arbitration lost sr=%x cr=%x state=%x\n",
211 __func__, sr, readb(base + (I2CR << reg_shift)),
212 state);
213 return -ERESTART;
214 }
215 if ((sr & (state >> 8)) == (unsigned char)state)
216 return sr;
217 WATCHDOG_RESET();
218 elapsed = get_timer(start_time);
219 if (elapsed > (CONFIG_SYS_HZ / 10)) /* .1 seconds */
220 break;
221 }
222 printf("%s: failed sr=%x cr=%x state=%x\n", __func__,
223 sr, readb(base + (I2CR << reg_shift)), state);
224 return -ETIMEDOUT;
225 }
226
tx_byte(struct mxc_i2c_bus * i2c_bus,u8 byte)227 static int tx_byte(struct mxc_i2c_bus *i2c_bus, u8 byte)
228 {
229 int ret;
230 int reg_shift = i2c_bus->driver_data & I2C_QUIRK_FLAG ?
231 VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT;
232 ulong base = i2c_bus->base;
233
234 writeb(I2SR_IIF_CLEAR, base + (I2SR << reg_shift));
235 writeb(byte, base + (I2DR << reg_shift));
236
237 ret = wait_for_sr_state(i2c_bus, ST_IIF);
238 if (ret < 0)
239 return ret;
240 if (ret & I2SR_RX_NO_AK)
241 return -EREMOTEIO;
242 return 0;
243 }
244
245 /*
246 * Stub implementations for outer i2c slave operations.
247 */
__i2c_force_reset_slave(void)248 void __i2c_force_reset_slave(void)
249 {
250 }
251 void i2c_force_reset_slave(void)
252 __attribute__((weak, alias("__i2c_force_reset_slave")));
253
254 /*
255 * Stop I2C transaction
256 */
i2c_imx_stop(struct mxc_i2c_bus * i2c_bus)257 static void i2c_imx_stop(struct mxc_i2c_bus *i2c_bus)
258 {
259 int ret;
260 int reg_shift = i2c_bus->driver_data & I2C_QUIRK_FLAG ?
261 VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT;
262 ulong base = i2c_bus->base;
263 unsigned int temp = readb(base + (I2CR << reg_shift));
264
265 temp &= ~(I2CR_MSTA | I2CR_MTX);
266 writeb(temp, base + (I2CR << reg_shift));
267 ret = wait_for_sr_state(i2c_bus, ST_BUS_IDLE);
268 if (ret < 0)
269 printf("%s:trigger stop failed\n", __func__);
270 }
271
272 /*
273 * Send start signal, chip address and
274 * write register address
275 */
i2c_init_transfer_(struct mxc_i2c_bus * i2c_bus,u8 chip,u32 addr,int alen)276 static int i2c_init_transfer_(struct mxc_i2c_bus *i2c_bus, u8 chip,
277 u32 addr, int alen)
278 {
279 unsigned int temp;
280 int ret;
281 bool quirk = i2c_bus->driver_data & I2C_QUIRK_FLAG ? true : false;
282 ulong base = i2c_bus->base;
283 int reg_shift = quirk ? VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT;
284
285 /* Reset i2c slave */
286 i2c_force_reset_slave();
287
288 /* Enable I2C controller */
289 if (quirk)
290 ret = readb(base + (I2CR << reg_shift)) & I2CR_IDIS;
291 else
292 ret = !(readb(base + (I2CR << reg_shift)) & I2CR_IEN);
293
294 if (ret) {
295 writeb(I2CR_IEN, base + (I2CR << reg_shift));
296 /* Wait for controller to be stable */
297 udelay(50);
298 }
299
300 if (readb(base + (IADR << reg_shift)) == (chip << 1))
301 writeb((chip << 1) ^ 2, base + (IADR << reg_shift));
302 writeb(I2SR_IIF_CLEAR, base + (I2SR << reg_shift));
303 ret = wait_for_sr_state(i2c_bus, ST_BUS_IDLE);
304 if (ret < 0)
305 return ret;
306
307 /* Start I2C transaction */
308 temp = readb(base + (I2CR << reg_shift));
309 temp |= I2CR_MSTA;
310 writeb(temp, base + (I2CR << reg_shift));
311
312 ret = wait_for_sr_state(i2c_bus, ST_BUS_BUSY);
313 if (ret < 0)
314 return ret;
315
316 temp |= I2CR_MTX | I2CR_TX_NO_AK;
317 writeb(temp, base + (I2CR << reg_shift));
318
319 if (alen >= 0) {
320 /* write slave address */
321 ret = tx_byte(i2c_bus, chip << 1);
322 if (ret < 0)
323 return ret;
324
325 while (alen--) {
326 ret = tx_byte(i2c_bus, (addr >> (alen * 8)) & 0xff);
327 if (ret < 0)
328 return ret;
329 }
330 }
331
332 return 0;
333 }
334
335 #ifndef CONFIG_DM_I2C
i2c_idle_bus(struct mxc_i2c_bus * i2c_bus)336 int i2c_idle_bus(struct mxc_i2c_bus *i2c_bus)
337 {
338 if (i2c_bus && i2c_bus->idle_bus_fn)
339 return i2c_bus->idle_bus_fn(i2c_bus->idle_bus_data);
340 return 0;
341 }
342 #else
343 /*
344 * See Linux Documentation/devicetree/bindings/i2c/i2c-imx.txt
345 * "
346 * scl-gpios: specify the gpio related to SCL pin
347 * sda-gpios: specify the gpio related to SDA pin
348 * add pinctrl to configure i2c pins to gpio function for i2c
349 * bus recovery, call it "gpio" state
350 * "
351 *
352 * The i2c_idle_bus is an implementation following Linux Kernel.
353 */
i2c_idle_bus(struct mxc_i2c_bus * i2c_bus)354 int i2c_idle_bus(struct mxc_i2c_bus *i2c_bus)
355 {
356 struct udevice *bus = i2c_bus->bus;
357 struct gpio_desc *scl_gpio = &i2c_bus->scl_gpio;
358 struct gpio_desc *sda_gpio = &i2c_bus->sda_gpio;
359 int sda, scl;
360 int i, ret = 0;
361 ulong elapsed, start_time;
362
363 if (pinctrl_select_state(bus, "gpio")) {
364 dev_dbg(bus, "Can not to switch to use gpio pinmux\n");
365 /*
366 * GPIO pinctrl for i2c force idle is not a must,
367 * but it is strongly recommended to be used.
368 * Because it can help you to recover from bad
369 * i2c bus state. Do not return failure, because
370 * it is not a must.
371 */
372 return 0;
373 }
374
375 dm_gpio_set_dir_flags(scl_gpio, GPIOD_IS_IN);
376 dm_gpio_set_dir_flags(sda_gpio, GPIOD_IS_IN);
377 scl = dm_gpio_get_value(scl_gpio);
378 sda = dm_gpio_get_value(sda_gpio);
379
380 if ((sda & scl) == 1)
381 goto exit; /* Bus is idle already */
382
383 /* Send high and low on the SCL line */
384 for (i = 0; i < 9; i++) {
385 dm_gpio_set_dir_flags(scl_gpio, GPIOD_IS_OUT);
386 dm_gpio_set_value(scl_gpio, 0);
387 udelay(50);
388 dm_gpio_set_dir_flags(scl_gpio, GPIOD_IS_IN);
389 udelay(50);
390 }
391 start_time = get_timer(0);
392 for (;;) {
393 dm_gpio_set_dir_flags(scl_gpio, GPIOD_IS_IN);
394 dm_gpio_set_dir_flags(sda_gpio, GPIOD_IS_IN);
395 scl = dm_gpio_get_value(scl_gpio);
396 sda = dm_gpio_get_value(sda_gpio);
397 if ((sda & scl) == 1)
398 break;
399 WATCHDOG_RESET();
400 elapsed = get_timer(start_time);
401 if (elapsed > (CONFIG_SYS_HZ / 5)) { /* .2 seconds */
402 ret = -EBUSY;
403 printf("%s: failed to clear bus, sda=%d scl=%d\n", __func__, sda, scl);
404 break;
405 }
406 }
407
408 exit:
409 pinctrl_select_state(bus, "default");
410 return ret;
411 }
412 #endif
413
i2c_init_transfer(struct mxc_i2c_bus * i2c_bus,u8 chip,u32 addr,int alen)414 static int i2c_init_transfer(struct mxc_i2c_bus *i2c_bus, u8 chip,
415 u32 addr, int alen)
416 {
417 int retry;
418 int ret;
419 int reg_shift = i2c_bus->driver_data & I2C_QUIRK_FLAG ?
420 VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT;
421
422 if (!i2c_bus->base)
423 return -EINVAL;
424
425 for (retry = 0; retry < 3; retry++) {
426 ret = i2c_init_transfer_(i2c_bus, chip, addr, alen);
427 if (ret >= 0)
428 return 0;
429 i2c_imx_stop(i2c_bus);
430 if (ret == -EREMOTEIO)
431 return ret;
432
433 printf("%s: failed for chip 0x%x retry=%d\n", __func__, chip,
434 retry);
435 if (ret != -ERESTART)
436 /* Disable controller */
437 writeb(I2CR_IDIS, i2c_bus->base + (I2CR << reg_shift));
438 udelay(100);
439 if (i2c_idle_bus(i2c_bus) < 0)
440 break;
441 }
442 printf("%s: give up i2c_regs=0x%lx\n", __func__, i2c_bus->base);
443 return ret;
444 }
445
446
i2c_write_data(struct mxc_i2c_bus * i2c_bus,u8 chip,const u8 * buf,int len)447 static int i2c_write_data(struct mxc_i2c_bus *i2c_bus, u8 chip, const u8 *buf,
448 int len)
449 {
450 int i, ret = 0;
451
452 debug("i2c_write_data: chip=0x%x, len=0x%x\n", chip, len);
453 debug("write_data: ");
454 /* use rc for counter */
455 for (i = 0; i < len; ++i)
456 debug(" 0x%02x", buf[i]);
457 debug("\n");
458
459 for (i = 0; i < len; i++) {
460 ret = tx_byte(i2c_bus, buf[i]);
461 if (ret < 0) {
462 debug("i2c_write_data(): rc=%d\n", ret);
463 break;
464 }
465 }
466
467 return ret;
468 }
469
i2c_read_data(struct mxc_i2c_bus * i2c_bus,uchar chip,uchar * buf,int len)470 static int i2c_read_data(struct mxc_i2c_bus *i2c_bus, uchar chip, uchar *buf,
471 int len)
472 {
473 int ret;
474 unsigned int temp;
475 int i;
476 int reg_shift = i2c_bus->driver_data & I2C_QUIRK_FLAG ?
477 VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT;
478 ulong base = i2c_bus->base;
479
480 debug("i2c_read_data: chip=0x%x, len=0x%x\n", chip, len);
481
482 /* setup bus to read data */
483 temp = readb(base + (I2CR << reg_shift));
484 temp &= ~(I2CR_MTX | I2CR_TX_NO_AK);
485 if (len == 1)
486 temp |= I2CR_TX_NO_AK;
487 writeb(temp, base + (I2CR << reg_shift));
488 writeb(I2SR_IIF_CLEAR, base + (I2SR << reg_shift));
489 /* dummy read to clear ICF */
490 readb(base + (I2DR << reg_shift));
491
492 /* read data */
493 for (i = 0; i < len; i++) {
494 ret = wait_for_sr_state(i2c_bus, ST_IIF);
495 if (ret < 0) {
496 debug("i2c_read_data(): ret=%d\n", ret);
497 i2c_imx_stop(i2c_bus);
498 return ret;
499 }
500
501 /*
502 * It must generate STOP before read I2DR to prevent
503 * controller from generating another clock cycle
504 */
505 if (i == (len - 1)) {
506 i2c_imx_stop(i2c_bus);
507 } else if (i == (len - 2)) {
508 temp = readb(base + (I2CR << reg_shift));
509 temp |= I2CR_TX_NO_AK;
510 writeb(temp, base + (I2CR << reg_shift));
511 }
512 writeb(I2SR_IIF_CLEAR, base + (I2SR << reg_shift));
513 buf[i] = readb(base + (I2DR << reg_shift));
514 }
515
516 /* reuse ret for counter*/
517 for (ret = 0; ret < len; ++ret)
518 debug(" 0x%02x", buf[ret]);
519 debug("\n");
520
521 i2c_imx_stop(i2c_bus);
522 return 0;
523 }
524
525 #ifndef CONFIG_DM_I2C
526 /*
527 * Read data from I2C device
528 */
bus_i2c_read(struct mxc_i2c_bus * i2c_bus,u8 chip,u32 addr,int alen,u8 * buf,int len)529 static int bus_i2c_read(struct mxc_i2c_bus *i2c_bus, u8 chip, u32 addr,
530 int alen, u8 *buf, int len)
531 {
532 int ret = 0;
533 u32 temp;
534 int reg_shift = i2c_bus->driver_data & I2C_QUIRK_FLAG ?
535 VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT;
536 ulong base = i2c_bus->base;
537
538 ret = i2c_init_transfer(i2c_bus, chip, addr, alen);
539 if (ret < 0)
540 return ret;
541
542 if (alen >= 0) {
543 temp = readb(base + (I2CR << reg_shift));
544 temp |= I2CR_RSTA;
545 writeb(temp, base + (I2CR << reg_shift));
546 }
547
548 ret = tx_byte(i2c_bus, (chip << 1) | 1);
549 if (ret < 0) {
550 i2c_imx_stop(i2c_bus);
551 return ret;
552 }
553
554 ret = i2c_read_data(i2c_bus, chip, buf, len);
555
556 i2c_imx_stop(i2c_bus);
557 return ret;
558 }
559
560 /*
561 * Write data to I2C device
562 */
bus_i2c_write(struct mxc_i2c_bus * i2c_bus,u8 chip,u32 addr,int alen,const u8 * buf,int len)563 static int bus_i2c_write(struct mxc_i2c_bus *i2c_bus, u8 chip, u32 addr,
564 int alen, const u8 *buf, int len)
565 {
566 int ret = 0;
567
568 ret = i2c_init_transfer(i2c_bus, chip, addr, alen);
569 if (ret < 0)
570 return ret;
571
572 ret = i2c_write_data(i2c_bus, chip, buf, len);
573
574 i2c_imx_stop(i2c_bus);
575
576 return ret;
577 }
578
579 #if !defined(I2C2_BASE_ADDR)
580 #define I2C2_BASE_ADDR 0
581 #endif
582
583 #if !defined(I2C3_BASE_ADDR)
584 #define I2C3_BASE_ADDR 0
585 #endif
586
587 #if !defined(I2C4_BASE_ADDR)
588 #define I2C4_BASE_ADDR 0
589 #endif
590
591 #if !defined(I2C5_BASE_ADDR)
592 #define I2C5_BASE_ADDR 0
593 #endif
594
595 #if !defined(I2C6_BASE_ADDR)
596 #define I2C6_BASE_ADDR 0
597 #endif
598
599 #if !defined(I2C7_BASE_ADDR)
600 #define I2C7_BASE_ADDR 0
601 #endif
602
603 #if !defined(I2C8_BASE_ADDR)
604 #define I2C8_BASE_ADDR 0
605 #endif
606
607 static struct mxc_i2c_bus mxc_i2c_buses[] = {
608 #if defined(CONFIG_ARCH_LS1021A) || defined(CONFIG_VF610) || \
609 defined(CONFIG_FSL_LAYERSCAPE)
610 { 0, I2C1_BASE_ADDR, I2C_QUIRK_FLAG },
611 { 1, I2C2_BASE_ADDR, I2C_QUIRK_FLAG },
612 { 2, I2C3_BASE_ADDR, I2C_QUIRK_FLAG },
613 { 3, I2C4_BASE_ADDR, I2C_QUIRK_FLAG },
614 { 4, I2C5_BASE_ADDR, I2C_QUIRK_FLAG },
615 { 5, I2C6_BASE_ADDR, I2C_QUIRK_FLAG },
616 { 6, I2C7_BASE_ADDR, I2C_QUIRK_FLAG },
617 { 7, I2C8_BASE_ADDR, I2C_QUIRK_FLAG },
618 #else
619 { 0, I2C1_BASE_ADDR, 0 },
620 { 1, I2C2_BASE_ADDR, 0 },
621 { 2, I2C3_BASE_ADDR, 0 },
622 { 3, I2C4_BASE_ADDR, 0 },
623 { 4, I2C5_BASE_ADDR, 0 },
624 { 5, I2C6_BASE_ADDR, 0 },
625 { 6, I2C7_BASE_ADDR, 0 },
626 { 7, I2C8_BASE_ADDR, 0 },
627 #endif
628 };
629
i2c_get_base(struct i2c_adapter * adap)630 struct mxc_i2c_bus *i2c_get_base(struct i2c_adapter *adap)
631 {
632 return &mxc_i2c_buses[adap->hwadapnr];
633 }
634
mxc_i2c_read(struct i2c_adapter * adap,uint8_t chip,uint addr,int alen,uint8_t * buffer,int len)635 static int mxc_i2c_read(struct i2c_adapter *adap, uint8_t chip,
636 uint addr, int alen, uint8_t *buffer,
637 int len)
638 {
639 return bus_i2c_read(i2c_get_base(adap), chip, addr, alen, buffer, len);
640 }
641
mxc_i2c_write(struct i2c_adapter * adap,uint8_t chip,uint addr,int alen,uint8_t * buffer,int len)642 static int mxc_i2c_write(struct i2c_adapter *adap, uint8_t chip,
643 uint addr, int alen, uint8_t *buffer,
644 int len)
645 {
646 return bus_i2c_write(i2c_get_base(adap), chip, addr, alen, buffer, len);
647 }
648
649 /*
650 * Test if a chip at a given address responds (probe the chip)
651 */
mxc_i2c_probe(struct i2c_adapter * adap,uint8_t chip)652 static int mxc_i2c_probe(struct i2c_adapter *adap, uint8_t chip)
653 {
654 return bus_i2c_write(i2c_get_base(adap), chip, 0, 0, NULL, 0);
655 }
656
__enable_i2c_clk(unsigned char enable,unsigned i2c_num)657 int __enable_i2c_clk(unsigned char enable, unsigned i2c_num)
658 {
659 return 1;
660 }
661 int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
662 __attribute__((weak, alias("__enable_i2c_clk")));
663
bus_i2c_init(int index,int speed,int unused,int (* idle_bus_fn)(void * p),void * idle_bus_data)664 void bus_i2c_init(int index, int speed, int unused,
665 int (*idle_bus_fn)(void *p), void *idle_bus_data)
666 {
667 int ret;
668
669 if (index >= ARRAY_SIZE(mxc_i2c_buses)) {
670 debug("Error i2c index\n");
671 return;
672 }
673
674 /*
675 * Warning: Be careful to allow the assignment to a static
676 * variable here. This function could be called while U-Boot is
677 * still running in flash memory. So such assignment is equal
678 * to write data to flash without erasing.
679 */
680 if (idle_bus_fn)
681 mxc_i2c_buses[index].idle_bus_fn = idle_bus_fn;
682 if (idle_bus_data)
683 mxc_i2c_buses[index].idle_bus_data = idle_bus_data;
684
685 ret = enable_i2c_clk(1, index);
686 if (ret < 0) {
687 debug("I2C-%d clk fail to enable.\n", index);
688 return;
689 }
690
691 bus_i2c_set_bus_speed(&mxc_i2c_buses[index], speed);
692 }
693
694 /*
695 * Early init I2C for prepare read the clk through I2C.
696 */
i2c_early_init_f(void)697 void i2c_early_init_f(void)
698 {
699 ulong base = mxc_i2c_buses[I2C_EARLY_INIT_INDEX].base;
700 bool quirk = mxc_i2c_buses[I2C_EARLY_INIT_INDEX].driver_data
701 & I2C_QUIRK_FLAG ? true : false;
702 int reg_shift = quirk ? VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT;
703
704 /* Set I2C divider value */
705 writeb(I2C_IFDR_DIV_CONSERVATIVE, base + (IFDR << reg_shift));
706 /* Reset module */
707 writeb(I2CR_IDIS, base + (I2CR << reg_shift));
708 writeb(0, base + (I2SR << reg_shift));
709 /* Enable I2C */
710 writeb(I2CR_IEN, base + (I2CR << reg_shift));
711 }
712
713 /*
714 * Init I2C Bus
715 */
mxc_i2c_init(struct i2c_adapter * adap,int speed,int slaveaddr)716 static void mxc_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr)
717 {
718 bus_i2c_init(adap->hwadapnr, speed, slaveaddr, NULL, NULL);
719 }
720
721 /*
722 * Set I2C Speed
723 */
mxc_i2c_set_bus_speed(struct i2c_adapter * adap,uint speed)724 static u32 mxc_i2c_set_bus_speed(struct i2c_adapter *adap, uint speed)
725 {
726 return bus_i2c_set_bus_speed(i2c_get_base(adap), speed);
727 }
728
729 /*
730 * Register mxc i2c adapters
731 */
732 #ifdef CONFIG_SYS_I2C_MXC_I2C1
733 U_BOOT_I2C_ADAP_COMPLETE(mxc0, mxc_i2c_init, mxc_i2c_probe,
734 mxc_i2c_read, mxc_i2c_write,
735 mxc_i2c_set_bus_speed,
736 CONFIG_SYS_MXC_I2C1_SPEED,
737 CONFIG_SYS_MXC_I2C1_SLAVE, 0)
738 #endif
739
740 #ifdef CONFIG_SYS_I2C_MXC_I2C2
741 U_BOOT_I2C_ADAP_COMPLETE(mxc1, mxc_i2c_init, mxc_i2c_probe,
742 mxc_i2c_read, mxc_i2c_write,
743 mxc_i2c_set_bus_speed,
744 CONFIG_SYS_MXC_I2C2_SPEED,
745 CONFIG_SYS_MXC_I2C2_SLAVE, 1)
746 #endif
747
748 #ifdef CONFIG_SYS_I2C_MXC_I2C3
749 U_BOOT_I2C_ADAP_COMPLETE(mxc2, mxc_i2c_init, mxc_i2c_probe,
750 mxc_i2c_read, mxc_i2c_write,
751 mxc_i2c_set_bus_speed,
752 CONFIG_SYS_MXC_I2C3_SPEED,
753 CONFIG_SYS_MXC_I2C3_SLAVE, 2)
754 #endif
755
756 #ifdef CONFIG_SYS_I2C_MXC_I2C4
757 U_BOOT_I2C_ADAP_COMPLETE(mxc3, mxc_i2c_init, mxc_i2c_probe,
758 mxc_i2c_read, mxc_i2c_write,
759 mxc_i2c_set_bus_speed,
760 CONFIG_SYS_MXC_I2C4_SPEED,
761 CONFIG_SYS_MXC_I2C4_SLAVE, 3)
762 #endif
763
764 #ifdef CONFIG_SYS_I2C_MXC_I2C5
765 U_BOOT_I2C_ADAP_COMPLETE(mxc4, mxc_i2c_init, mxc_i2c_probe,
766 mxc_i2c_read, mxc_i2c_write,
767 mxc_i2c_set_bus_speed,
768 CONFIG_SYS_MXC_I2C5_SPEED,
769 CONFIG_SYS_MXC_I2C5_SLAVE, 4)
770 #endif
771
772 #ifdef CONFIG_SYS_I2C_MXC_I2C6
773 U_BOOT_I2C_ADAP_COMPLETE(mxc5, mxc_i2c_init, mxc_i2c_probe,
774 mxc_i2c_read, mxc_i2c_write,
775 mxc_i2c_set_bus_speed,
776 CONFIG_SYS_MXC_I2C6_SPEED,
777 CONFIG_SYS_MXC_I2C6_SLAVE, 5)
778 #endif
779
780 #ifdef CONFIG_SYS_I2C_MXC_I2C7
781 U_BOOT_I2C_ADAP_COMPLETE(mxc6, mxc_i2c_init, mxc_i2c_probe,
782 mxc_i2c_read, mxc_i2c_write,
783 mxc_i2c_set_bus_speed,
784 CONFIG_SYS_MXC_I2C7_SPEED,
785 CONFIG_SYS_MXC_I2C7_SLAVE, 6)
786 #endif
787
788 #ifdef CONFIG_SYS_I2C_MXC_I2C8
789 U_BOOT_I2C_ADAP_COMPLETE(mxc7, mxc_i2c_init, mxc_i2c_probe,
790 mxc_i2c_read, mxc_i2c_write,
791 mxc_i2c_set_bus_speed,
792 CONFIG_SYS_MXC_I2C8_SPEED,
793 CONFIG_SYS_MXC_I2C8_SLAVE, 7)
794 #endif
795
796 #else
797
798 static int mxc_i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
799 {
800 struct mxc_i2c_bus *i2c_bus = dev_get_priv(bus);
801
802 return bus_i2c_set_bus_speed(i2c_bus, speed);
803 }
804
805 static int mxc_i2c_probe(struct udevice *bus)
806 {
807 struct mxc_i2c_bus *i2c_bus = dev_get_priv(bus);
808 const void *fdt = gd->fdt_blob;
809 int node = dev_of_offset(bus);
810 fdt_addr_t addr;
811 int ret, ret2;
812
813 i2c_bus->driver_data = dev_get_driver_data(bus);
814
815 addr = devfdt_get_addr(bus);
816 if (addr == FDT_ADDR_T_NONE)
817 return -EINVAL;
818
819 i2c_bus->base = addr;
820 i2c_bus->index = bus->seq;
821 i2c_bus->bus = bus;
822
823 /* Enable clk */
824 ret = enable_i2c_clk(1, bus->seq);
825 if (ret < 0)
826 return ret;
827
828 /*
829 * See Documentation/devicetree/bindings/i2c/i2c-imx.txt
830 * Use gpio to force bus idle when necessary.
831 */
832 ret = fdt_stringlist_search(fdt, node, "pinctrl-names", "gpio");
833 if (ret < 0) {
834 debug("i2c bus %d at 0x%2lx, no gpio pinctrl state.\n", bus->seq, i2c_bus->base);
835 } else {
836 ret = gpio_request_by_name_nodev(offset_to_ofnode(node),
837 "scl-gpios", 0, &i2c_bus->scl_gpio,
838 GPIOD_IS_OUT);
839 ret2 = gpio_request_by_name_nodev(offset_to_ofnode(node),
840 "sda-gpios", 0, &i2c_bus->sda_gpio,
841 GPIOD_IS_OUT);
842 if (!dm_gpio_is_valid(&i2c_bus->sda_gpio) ||
843 !dm_gpio_is_valid(&i2c_bus->scl_gpio) ||
844 ret || ret2) {
845 dev_err(dev, "i2c bus %d at %lu, fail to request scl/sda gpio\n", bus->seq, i2c_bus->base);
846 return -EINVAL;
847 }
848 }
849
850 ret = i2c_idle_bus(i2c_bus);
851 if (ret < 0) {
852 /* Disable clk */
853 enable_i2c_clk(0, bus->seq);
854 return ret;
855 }
856
857 /*
858 * Pinmux settings are in board file now, until pinmux is supported,
859 * we can set pinmux here in probe function.
860 */
861
862 debug("i2c : controller bus %d at %lu , speed %d: ",
863 bus->seq, i2c_bus->base,
864 i2c_bus->speed);
865
866 return 0;
867 }
868
869 static int mxc_i2c_probe_chip(struct udevice *bus, u32 chip_addr,
870 u32 chip_flags)
871 {
872 int ret;
873 struct mxc_i2c_bus *i2c_bus = dev_get_priv(bus);
874
875 ret = i2c_init_transfer(i2c_bus, chip_addr, 0, 0);
876 if (ret < 0) {
877 debug("%s failed, ret = %d\n", __func__, ret);
878 return ret;
879 }
880
881 i2c_imx_stop(i2c_bus);
882
883 return 0;
884 }
885
886 static int mxc_i2c_xfer(struct udevice *bus, struct i2c_msg *msg, int nmsgs)
887 {
888 struct mxc_i2c_bus *i2c_bus = dev_get_priv(bus);
889 int ret = 0;
890 ulong base = i2c_bus->base;
891 int reg_shift = i2c_bus->driver_data & I2C_QUIRK_FLAG ?
892 VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT;
893
894 /*
895 * Here the 3rd parameter addr and the 4th one alen are set to 0,
896 * because here we only want to send out chip address. The register
897 * address is wrapped in msg.
898 */
899 ret = i2c_init_transfer(i2c_bus, msg->addr, 0, 0);
900 if (ret < 0) {
901 debug("i2c_init_transfer error: %d\n", ret);
902 return ret;
903 }
904
905 for (; nmsgs > 0; nmsgs--, msg++) {
906 bool next_is_read = nmsgs > 1 && (msg[1].flags & I2C_M_RD);
907 debug("i2c_xfer: chip=0x%x, len=0x%x\n", msg->addr, msg->len);
908 if (msg->flags & I2C_M_RD)
909 ret = i2c_read_data(i2c_bus, msg->addr, msg->buf,
910 msg->len);
911 else {
912 ret = i2c_write_data(i2c_bus, msg->addr, msg->buf,
913 msg->len);
914 if (ret)
915 break;
916 if (next_is_read) {
917 /* Reuse ret */
918 ret = readb(base + (I2CR << reg_shift));
919 ret |= I2CR_RSTA;
920 writeb(ret, base + (I2CR << reg_shift));
921
922 ret = tx_byte(i2c_bus, (msg->addr << 1) | 1);
923 if (ret < 0) {
924 i2c_imx_stop(i2c_bus);
925 break;
926 }
927 }
928 }
929 }
930
931 if (ret)
932 debug("i2c_write: error sending\n");
933
934 i2c_imx_stop(i2c_bus);
935
936 return ret;
937 }
938
939 static const struct dm_i2c_ops mxc_i2c_ops = {
940 .xfer = mxc_i2c_xfer,
941 .probe_chip = mxc_i2c_probe_chip,
942 .set_bus_speed = mxc_i2c_set_bus_speed,
943 };
944
945 static const struct udevice_id mxc_i2c_ids[] = {
946 { .compatible = "fsl,imx21-i2c", },
947 { .compatible = "fsl,vf610-i2c", .data = I2C_QUIRK_FLAG, },
948 {}
949 };
950
951 U_BOOT_DRIVER(i2c_mxc) = {
952 .name = "i2c_mxc",
953 .id = UCLASS_I2C,
954 .of_match = mxc_i2c_ids,
955 .probe = mxc_i2c_probe,
956 .priv_auto_alloc_size = sizeof(struct mxc_i2c_bus),
957 .ops = &mxc_i2c_ops,
958 };
959 #endif
960