1 // SPDX-License-Identifier: GPL-2.0
2 //
3 // Copyright 2013 Freescale Semiconductor, Inc.
4
5 #include <linux/clk.h>
6 #include <linux/cpufreq.h>
7 #include <linux/cpu_cooling.h>
8 #include <linux/delay.h>
9 #include <linux/interrupt.h>
10 #include <linux/io.h>
11 #include <linux/mfd/syscon.h>
12 #include <linux/module.h>
13 #include <linux/of.h>
14 #include <linux/platform_device.h>
15 #include <linux/regmap.h>
16 #include <linux/thermal.h>
17 #include <linux/nvmem-consumer.h>
18 #include <linux/pm_runtime.h>
19
20 #define REG_SET 0x4
21 #define REG_CLR 0x8
22 #define REG_TOG 0xc
23
24 /* i.MX6 specific */
25 #define IMX6_MISC0 0x0150
26 #define IMX6_MISC0_REFTOP_SELBIASOFF (1 << 3)
27 #define IMX6_MISC1 0x0160
28 #define IMX6_MISC1_IRQ_TEMPHIGH (1 << 29)
29 /* Below LOW and PANIC bits are only for TEMPMON_IMX6SX */
30 #define IMX6_MISC1_IRQ_TEMPLOW (1 << 28)
31 #define IMX6_MISC1_IRQ_TEMPPANIC (1 << 27)
32
33 #define IMX6_TEMPSENSE0 0x0180
34 #define IMX6_TEMPSENSE0_ALARM_VALUE_SHIFT 20
35 #define IMX6_TEMPSENSE0_ALARM_VALUE_MASK (0xfff << 20)
36 #define IMX6_TEMPSENSE0_TEMP_CNT_SHIFT 8
37 #define IMX6_TEMPSENSE0_TEMP_CNT_MASK (0xfff << 8)
38 #define IMX6_TEMPSENSE0_FINISHED (1 << 2)
39 #define IMX6_TEMPSENSE0_MEASURE_TEMP (1 << 1)
40 #define IMX6_TEMPSENSE0_POWER_DOWN (1 << 0)
41
42 #define IMX6_TEMPSENSE1 0x0190
43 #define IMX6_TEMPSENSE1_MEASURE_FREQ 0xffff
44 #define IMX6_TEMPSENSE1_MEASURE_FREQ_SHIFT 0
45
46 #define OCOTP_MEM0 0x0480
47 #define OCOTP_ANA1 0x04e0
48
49 /* Below TEMPSENSE2 is only for TEMPMON_IMX6SX */
50 #define IMX6_TEMPSENSE2 0x0290
51 #define IMX6_TEMPSENSE2_LOW_VALUE_SHIFT 0
52 #define IMX6_TEMPSENSE2_LOW_VALUE_MASK 0xfff
53 #define IMX6_TEMPSENSE2_PANIC_VALUE_SHIFT 16
54 #define IMX6_TEMPSENSE2_PANIC_VALUE_MASK 0xfff0000
55
56 /* i.MX7 specific */
57 #define IMX7_ANADIG_DIGPROG 0x800
58 #define IMX7_TEMPSENSE0 0x300
59 #define IMX7_TEMPSENSE0_PANIC_ALARM_SHIFT 18
60 #define IMX7_TEMPSENSE0_PANIC_ALARM_MASK (0x1ff << 18)
61 #define IMX7_TEMPSENSE0_HIGH_ALARM_SHIFT 9
62 #define IMX7_TEMPSENSE0_HIGH_ALARM_MASK (0x1ff << 9)
63 #define IMX7_TEMPSENSE0_LOW_ALARM_SHIFT 0
64 #define IMX7_TEMPSENSE0_LOW_ALARM_MASK 0x1ff
65
66 #define IMX7_TEMPSENSE1 0x310
67 #define IMX7_TEMPSENSE1_MEASURE_FREQ_SHIFT 16
68 #define IMX7_TEMPSENSE1_MEASURE_FREQ_MASK (0xffff << 16)
69 #define IMX7_TEMPSENSE1_FINISHED (1 << 11)
70 #define IMX7_TEMPSENSE1_MEASURE_TEMP (1 << 10)
71 #define IMX7_TEMPSENSE1_POWER_DOWN (1 << 9)
72 #define IMX7_TEMPSENSE1_TEMP_VALUE_SHIFT 0
73 #define IMX7_TEMPSENSE1_TEMP_VALUE_MASK 0x1ff
74
75 /* The driver supports 1 passive trip point and 1 critical trip point */
76 enum imx_thermal_trip {
77 IMX_TRIP_PASSIVE,
78 IMX_TRIP_CRITICAL,
79 };
80
81 #define IMX_POLLING_DELAY 2000 /* millisecond */
82 #define IMX_PASSIVE_DELAY 1000
83
84 #define TEMPMON_IMX6Q 1
85 #define TEMPMON_IMX6SX 2
86 #define TEMPMON_IMX7D 3
87
88 struct thermal_soc_data {
89 u32 version;
90
91 u32 sensor_ctrl;
92 u32 power_down_mask;
93 u32 measure_temp_mask;
94
95 u32 measure_freq_ctrl;
96 u32 measure_freq_mask;
97 u32 measure_freq_shift;
98
99 u32 temp_data;
100 u32 temp_value_mask;
101 u32 temp_value_shift;
102 u32 temp_valid_mask;
103
104 u32 panic_alarm_ctrl;
105 u32 panic_alarm_mask;
106 u32 panic_alarm_shift;
107
108 u32 high_alarm_ctrl;
109 u32 high_alarm_mask;
110 u32 high_alarm_shift;
111
112 u32 low_alarm_ctrl;
113 u32 low_alarm_mask;
114 u32 low_alarm_shift;
115 };
116
117 static struct thermal_trip trips[] = {
118 [IMX_TRIP_PASSIVE] = { .type = THERMAL_TRIP_PASSIVE },
119 [IMX_TRIP_CRITICAL] = { .type = THERMAL_TRIP_CRITICAL },
120 };
121
122 static struct thermal_soc_data thermal_imx6q_data = {
123 .version = TEMPMON_IMX6Q,
124
125 .sensor_ctrl = IMX6_TEMPSENSE0,
126 .power_down_mask = IMX6_TEMPSENSE0_POWER_DOWN,
127 .measure_temp_mask = IMX6_TEMPSENSE0_MEASURE_TEMP,
128
129 .measure_freq_ctrl = IMX6_TEMPSENSE1,
130 .measure_freq_shift = IMX6_TEMPSENSE1_MEASURE_FREQ_SHIFT,
131 .measure_freq_mask = IMX6_TEMPSENSE1_MEASURE_FREQ,
132
133 .temp_data = IMX6_TEMPSENSE0,
134 .temp_value_mask = IMX6_TEMPSENSE0_TEMP_CNT_MASK,
135 .temp_value_shift = IMX6_TEMPSENSE0_TEMP_CNT_SHIFT,
136 .temp_valid_mask = IMX6_TEMPSENSE0_FINISHED,
137
138 .high_alarm_ctrl = IMX6_TEMPSENSE0,
139 .high_alarm_mask = IMX6_TEMPSENSE0_ALARM_VALUE_MASK,
140 .high_alarm_shift = IMX6_TEMPSENSE0_ALARM_VALUE_SHIFT,
141 };
142
143 static struct thermal_soc_data thermal_imx6sx_data = {
144 .version = TEMPMON_IMX6SX,
145
146 .sensor_ctrl = IMX6_TEMPSENSE0,
147 .power_down_mask = IMX6_TEMPSENSE0_POWER_DOWN,
148 .measure_temp_mask = IMX6_TEMPSENSE0_MEASURE_TEMP,
149
150 .measure_freq_ctrl = IMX6_TEMPSENSE1,
151 .measure_freq_shift = IMX6_TEMPSENSE1_MEASURE_FREQ_SHIFT,
152 .measure_freq_mask = IMX6_TEMPSENSE1_MEASURE_FREQ,
153
154 .temp_data = IMX6_TEMPSENSE0,
155 .temp_value_mask = IMX6_TEMPSENSE0_TEMP_CNT_MASK,
156 .temp_value_shift = IMX6_TEMPSENSE0_TEMP_CNT_SHIFT,
157 .temp_valid_mask = IMX6_TEMPSENSE0_FINISHED,
158
159 .high_alarm_ctrl = IMX6_TEMPSENSE0,
160 .high_alarm_mask = IMX6_TEMPSENSE0_ALARM_VALUE_MASK,
161 .high_alarm_shift = IMX6_TEMPSENSE0_ALARM_VALUE_SHIFT,
162
163 .panic_alarm_ctrl = IMX6_TEMPSENSE2,
164 .panic_alarm_mask = IMX6_TEMPSENSE2_PANIC_VALUE_MASK,
165 .panic_alarm_shift = IMX6_TEMPSENSE2_PANIC_VALUE_SHIFT,
166
167 .low_alarm_ctrl = IMX6_TEMPSENSE2,
168 .low_alarm_mask = IMX6_TEMPSENSE2_LOW_VALUE_MASK,
169 .low_alarm_shift = IMX6_TEMPSENSE2_LOW_VALUE_SHIFT,
170 };
171
172 static struct thermal_soc_data thermal_imx7d_data = {
173 .version = TEMPMON_IMX7D,
174
175 .sensor_ctrl = IMX7_TEMPSENSE1,
176 .power_down_mask = IMX7_TEMPSENSE1_POWER_DOWN,
177 .measure_temp_mask = IMX7_TEMPSENSE1_MEASURE_TEMP,
178
179 .measure_freq_ctrl = IMX7_TEMPSENSE1,
180 .measure_freq_shift = IMX7_TEMPSENSE1_MEASURE_FREQ_SHIFT,
181 .measure_freq_mask = IMX7_TEMPSENSE1_MEASURE_FREQ_MASK,
182
183 .temp_data = IMX7_TEMPSENSE1,
184 .temp_value_mask = IMX7_TEMPSENSE1_TEMP_VALUE_MASK,
185 .temp_value_shift = IMX7_TEMPSENSE1_TEMP_VALUE_SHIFT,
186 .temp_valid_mask = IMX7_TEMPSENSE1_FINISHED,
187
188 .panic_alarm_ctrl = IMX7_TEMPSENSE1,
189 .panic_alarm_mask = IMX7_TEMPSENSE0_PANIC_ALARM_MASK,
190 .panic_alarm_shift = IMX7_TEMPSENSE0_PANIC_ALARM_SHIFT,
191
192 .high_alarm_ctrl = IMX7_TEMPSENSE0,
193 .high_alarm_mask = IMX7_TEMPSENSE0_HIGH_ALARM_MASK,
194 .high_alarm_shift = IMX7_TEMPSENSE0_HIGH_ALARM_SHIFT,
195
196 .low_alarm_ctrl = IMX7_TEMPSENSE0,
197 .low_alarm_mask = IMX7_TEMPSENSE0_LOW_ALARM_MASK,
198 .low_alarm_shift = IMX7_TEMPSENSE0_LOW_ALARM_SHIFT,
199 };
200
201 struct imx_thermal_data {
202 struct device *dev;
203 struct cpufreq_policy *policy;
204 struct thermal_zone_device *tz;
205 struct thermal_cooling_device *cdev;
206 struct regmap *tempmon;
207 u32 c1, c2; /* See formula in imx_init_calib() */
208 int temp_max;
209 int alarm_temp;
210 int last_temp;
211 bool irq_enabled;
212 int irq;
213 struct clk *thermal_clk;
214 const struct thermal_soc_data *socdata;
215 const char *temp_grade;
216 };
217
imx_set_panic_temp(struct imx_thermal_data * data,int panic_temp)218 static void imx_set_panic_temp(struct imx_thermal_data *data,
219 int panic_temp)
220 {
221 const struct thermal_soc_data *soc_data = data->socdata;
222 struct regmap *map = data->tempmon;
223 int critical_value;
224
225 critical_value = (data->c2 - panic_temp) / data->c1;
226
227 regmap_write(map, soc_data->panic_alarm_ctrl + REG_CLR,
228 soc_data->panic_alarm_mask);
229 regmap_write(map, soc_data->panic_alarm_ctrl + REG_SET,
230 critical_value << soc_data->panic_alarm_shift);
231 }
232
imx_set_alarm_temp(struct imx_thermal_data * data,int alarm_temp)233 static void imx_set_alarm_temp(struct imx_thermal_data *data,
234 int alarm_temp)
235 {
236 struct regmap *map = data->tempmon;
237 const struct thermal_soc_data *soc_data = data->socdata;
238 int alarm_value;
239
240 data->alarm_temp = alarm_temp;
241
242 if (data->socdata->version == TEMPMON_IMX7D)
243 alarm_value = alarm_temp / 1000 + data->c1 - 25;
244 else
245 alarm_value = (data->c2 - alarm_temp) / data->c1;
246
247 regmap_write(map, soc_data->high_alarm_ctrl + REG_CLR,
248 soc_data->high_alarm_mask);
249 regmap_write(map, soc_data->high_alarm_ctrl + REG_SET,
250 alarm_value << soc_data->high_alarm_shift);
251 }
252
imx_get_temp(struct thermal_zone_device * tz,int * temp)253 static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
254 {
255 struct imx_thermal_data *data = thermal_zone_device_priv(tz);
256 const struct thermal_soc_data *soc_data = data->socdata;
257 struct regmap *map = data->tempmon;
258 unsigned int n_meas;
259 u32 val;
260 int ret;
261
262 ret = pm_runtime_resume_and_get(data->dev);
263 if (ret < 0)
264 return ret;
265
266 regmap_read(map, soc_data->temp_data, &val);
267
268 if ((val & soc_data->temp_valid_mask) == 0)
269 return -EAGAIN;
270
271 n_meas = (val & soc_data->temp_value_mask)
272 >> soc_data->temp_value_shift;
273
274 /* See imx_init_calib() for formula derivation */
275 if (data->socdata->version == TEMPMON_IMX7D)
276 *temp = (n_meas - data->c1 + 25) * 1000;
277 else
278 *temp = data->c2 - n_meas * data->c1;
279
280 /* Update alarm value to next higher trip point for TEMPMON_IMX6Q */
281 if (data->socdata->version == TEMPMON_IMX6Q) {
282 if (data->alarm_temp == trips[IMX_TRIP_PASSIVE].temperature &&
283 *temp >= trips[IMX_TRIP_PASSIVE].temperature)
284 imx_set_alarm_temp(data, trips[IMX_TRIP_CRITICAL].temperature);
285 if (data->alarm_temp == trips[IMX_TRIP_CRITICAL].temperature &&
286 *temp < trips[IMX_TRIP_PASSIVE].temperature) {
287 imx_set_alarm_temp(data, trips[IMX_TRIP_PASSIVE].temperature);
288 dev_dbg(data->dev, "thermal alarm off: T < %d\n",
289 data->alarm_temp / 1000);
290 }
291 }
292
293 if (*temp != data->last_temp) {
294 dev_dbg(data->dev, "millicelsius: %d\n", *temp);
295 data->last_temp = *temp;
296 }
297
298 /* Reenable alarm IRQ if temperature below alarm temperature */
299 if (!data->irq_enabled && *temp < data->alarm_temp) {
300 data->irq_enabled = true;
301 enable_irq(data->irq);
302 }
303
304 pm_runtime_put(data->dev);
305
306 return 0;
307 }
308
imx_change_mode(struct thermal_zone_device * tz,enum thermal_device_mode mode)309 static int imx_change_mode(struct thermal_zone_device *tz,
310 enum thermal_device_mode mode)
311 {
312 struct imx_thermal_data *data = thermal_zone_device_priv(tz);
313
314 if (mode == THERMAL_DEVICE_ENABLED) {
315 pm_runtime_get(data->dev);
316
317 if (!data->irq_enabled) {
318 data->irq_enabled = true;
319 enable_irq(data->irq);
320 }
321 } else {
322 pm_runtime_put(data->dev);
323
324 if (data->irq_enabled) {
325 disable_irq(data->irq);
326 data->irq_enabled = false;
327 }
328 }
329
330 return 0;
331 }
332
imx_set_trip_temp(struct thermal_zone_device * tz,int trip_id,int temp)333 static int imx_set_trip_temp(struct thermal_zone_device *tz, int trip_id,
334 int temp)
335 {
336 struct imx_thermal_data *data = thermal_zone_device_priv(tz);
337 struct thermal_trip trip;
338 int ret;
339
340 ret = pm_runtime_resume_and_get(data->dev);
341 if (ret < 0)
342 return ret;
343
344 ret = __thermal_zone_get_trip(tz, trip_id, &trip);
345 if (ret)
346 return ret;
347
348 /* do not allow changing critical threshold */
349 if (trip.type == THERMAL_TRIP_CRITICAL)
350 return -EPERM;
351
352 /* do not allow passive to be set higher than critical */
353 if (temp < 0 || temp > trips[IMX_TRIP_CRITICAL].temperature)
354 return -EINVAL;
355
356 imx_set_alarm_temp(data, temp);
357
358 pm_runtime_put(data->dev);
359
360 return 0;
361 }
362
imx_bind(struct thermal_zone_device * tz,struct thermal_cooling_device * cdev)363 static int imx_bind(struct thermal_zone_device *tz,
364 struct thermal_cooling_device *cdev)
365 {
366 return thermal_zone_bind_cooling_device(tz, IMX_TRIP_PASSIVE, cdev,
367 THERMAL_NO_LIMIT,
368 THERMAL_NO_LIMIT,
369 THERMAL_WEIGHT_DEFAULT);
370 }
371
imx_unbind(struct thermal_zone_device * tz,struct thermal_cooling_device * cdev)372 static int imx_unbind(struct thermal_zone_device *tz,
373 struct thermal_cooling_device *cdev)
374 {
375 return thermal_zone_unbind_cooling_device(tz, IMX_TRIP_PASSIVE, cdev);
376 }
377
378 static struct thermal_zone_device_ops imx_tz_ops = {
379 .bind = imx_bind,
380 .unbind = imx_unbind,
381 .get_temp = imx_get_temp,
382 .change_mode = imx_change_mode,
383 .set_trip_temp = imx_set_trip_temp,
384 };
385
imx_init_calib(struct platform_device * pdev,u32 ocotp_ana1)386 static int imx_init_calib(struct platform_device *pdev, u32 ocotp_ana1)
387 {
388 struct imx_thermal_data *data = platform_get_drvdata(pdev);
389 int n1;
390 u64 temp64;
391
392 if (ocotp_ana1 == 0 || ocotp_ana1 == ~0) {
393 dev_err(&pdev->dev, "invalid sensor calibration data\n");
394 return -EINVAL;
395 }
396
397 /*
398 * On i.MX7D, we only use the calibration data at 25C to get the temp,
399 * Tmeas = ( Nmeas - n1) + 25; n1 is the fuse value for 25C.
400 */
401 if (data->socdata->version == TEMPMON_IMX7D) {
402 data->c1 = (ocotp_ana1 >> 9) & 0x1ff;
403 return 0;
404 }
405
406 /*
407 * The sensor is calibrated at 25 °C (aka T1) and the value measured
408 * (aka N1) at this temperature is provided in bits [31:20] in the
409 * i.MX's OCOTP value ANA1.
410 * To find the actual temperature T, the following formula has to be used
411 * when reading value n from the sensor:
412 *
413 * T = T1 + (N - N1) / (0.4148468 - 0.0015423 * N1) °C + 3.580661 °C
414 * = [T1' - N1 / (0.4148468 - 0.0015423 * N1) °C] + N / (0.4148468 - 0.0015423 * N1) °C
415 * = [T1' + N1 / (0.0015423 * N1 - 0.4148468) °C] - N / (0.0015423 * N1 - 0.4148468) °C
416 * = c2 - c1 * N
417 *
418 * with
419 *
420 * T1' = 28.580661 °C
421 * c1 = 1 / (0.0015423 * N1 - 0.4297157) °C
422 * c2 = T1' + N1 / (0.0015423 * N1 - 0.4148468) °C
423 * = T1' + N1 * c1
424 */
425 n1 = ocotp_ana1 >> 20;
426
427 temp64 = 10000000; /* use 10^7 as fixed point constant for values in formula */
428 temp64 *= 1000; /* to get result in °mC */
429 do_div(temp64, 15423 * n1 - 4148468);
430 data->c1 = temp64;
431 data->c2 = n1 * data->c1 + 28581;
432
433 return 0;
434 }
435
imx_init_temp_grade(struct platform_device * pdev,u32 ocotp_mem0)436 static void imx_init_temp_grade(struct platform_device *pdev, u32 ocotp_mem0)
437 {
438 struct imx_thermal_data *data = platform_get_drvdata(pdev);
439
440 /* The maximum die temp is specified by the Temperature Grade */
441 switch ((ocotp_mem0 >> 6) & 0x3) {
442 case 0: /* Commercial (0 to 95 °C) */
443 data->temp_grade = "Commercial";
444 data->temp_max = 95000;
445 break;
446 case 1: /* Extended Commercial (-20 °C to 105 °C) */
447 data->temp_grade = "Extended Commercial";
448 data->temp_max = 105000;
449 break;
450 case 2: /* Industrial (-40 °C to 105 °C) */
451 data->temp_grade = "Industrial";
452 data->temp_max = 105000;
453 break;
454 case 3: /* Automotive (-40 °C to 125 °C) */
455 data->temp_grade = "Automotive";
456 data->temp_max = 125000;
457 break;
458 }
459
460 /*
461 * Set the critical trip point at 5 °C under max
462 * Set the passive trip point at 10 °C under max (changeable via sysfs)
463 */
464 trips[IMX_TRIP_PASSIVE].temperature = data->temp_max - (1000 * 10);
465 trips[IMX_TRIP_CRITICAL].temperature = data->temp_max - (1000 * 5);
466 }
467
imx_init_from_tempmon_data(struct platform_device * pdev)468 static int imx_init_from_tempmon_data(struct platform_device *pdev)
469 {
470 struct regmap *map;
471 int ret;
472 u32 val;
473
474 map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
475 "fsl,tempmon-data");
476 if (IS_ERR(map)) {
477 ret = PTR_ERR(map);
478 dev_err(&pdev->dev, "failed to get sensor regmap: %d\n", ret);
479 return ret;
480 }
481
482 ret = regmap_read(map, OCOTP_ANA1, &val);
483 if (ret) {
484 dev_err(&pdev->dev, "failed to read sensor data: %d\n", ret);
485 return ret;
486 }
487 ret = imx_init_calib(pdev, val);
488 if (ret)
489 return ret;
490
491 ret = regmap_read(map, OCOTP_MEM0, &val);
492 if (ret) {
493 dev_err(&pdev->dev, "failed to read sensor data: %d\n", ret);
494 return ret;
495 }
496 imx_init_temp_grade(pdev, val);
497
498 return 0;
499 }
500
imx_init_from_nvmem_cells(struct platform_device * pdev)501 static int imx_init_from_nvmem_cells(struct platform_device *pdev)
502 {
503 int ret;
504 u32 val;
505
506 ret = nvmem_cell_read_u32(&pdev->dev, "calib", &val);
507 if (ret)
508 return ret;
509
510 ret = imx_init_calib(pdev, val);
511 if (ret)
512 return ret;
513
514 ret = nvmem_cell_read_u32(&pdev->dev, "temp_grade", &val);
515 if (ret)
516 return ret;
517 imx_init_temp_grade(pdev, val);
518
519 return 0;
520 }
521
imx_thermal_alarm_irq(int irq,void * dev)522 static irqreturn_t imx_thermal_alarm_irq(int irq, void *dev)
523 {
524 struct imx_thermal_data *data = dev;
525
526 disable_irq_nosync(irq);
527 data->irq_enabled = false;
528
529 return IRQ_WAKE_THREAD;
530 }
531
imx_thermal_alarm_irq_thread(int irq,void * dev)532 static irqreturn_t imx_thermal_alarm_irq_thread(int irq, void *dev)
533 {
534 struct imx_thermal_data *data = dev;
535
536 dev_dbg(data->dev, "THERMAL ALARM: T > %d\n", data->alarm_temp / 1000);
537
538 thermal_zone_device_update(data->tz, THERMAL_EVENT_UNSPECIFIED);
539
540 return IRQ_HANDLED;
541 }
542
543 static const struct of_device_id of_imx_thermal_match[] = {
544 { .compatible = "fsl,imx6q-tempmon", .data = &thermal_imx6q_data, },
545 { .compatible = "fsl,imx6sx-tempmon", .data = &thermal_imx6sx_data, },
546 { .compatible = "fsl,imx7d-tempmon", .data = &thermal_imx7d_data, },
547 { /* end */ }
548 };
549 MODULE_DEVICE_TABLE(of, of_imx_thermal_match);
550
551 #ifdef CONFIG_CPU_FREQ
552 /*
553 * Create cooling device in case no #cooling-cells property is available in
554 * CPU node
555 */
imx_thermal_register_legacy_cooling(struct imx_thermal_data * data)556 static int imx_thermal_register_legacy_cooling(struct imx_thermal_data *data)
557 {
558 struct device_node *np;
559 int ret = 0;
560
561 data->policy = cpufreq_cpu_get(0);
562 if (!data->policy) {
563 pr_debug("%s: CPUFreq policy not found\n", __func__);
564 return -EPROBE_DEFER;
565 }
566
567 np = of_get_cpu_node(data->policy->cpu, NULL);
568
569 if (!np || !of_property_present(np, "#cooling-cells")) {
570 data->cdev = cpufreq_cooling_register(data->policy);
571 if (IS_ERR(data->cdev)) {
572 ret = PTR_ERR(data->cdev);
573 cpufreq_cpu_put(data->policy);
574 }
575 }
576
577 of_node_put(np);
578
579 return ret;
580 }
581
imx_thermal_unregister_legacy_cooling(struct imx_thermal_data * data)582 static void imx_thermal_unregister_legacy_cooling(struct imx_thermal_data *data)
583 {
584 cpufreq_cooling_unregister(data->cdev);
585 cpufreq_cpu_put(data->policy);
586 }
587
588 #else
589
imx_thermal_register_legacy_cooling(struct imx_thermal_data * data)590 static inline int imx_thermal_register_legacy_cooling(struct imx_thermal_data *data)
591 {
592 return 0;
593 }
594
imx_thermal_unregister_legacy_cooling(struct imx_thermal_data * data)595 static inline void imx_thermal_unregister_legacy_cooling(struct imx_thermal_data *data)
596 {
597 }
598 #endif
599
imx_thermal_probe(struct platform_device * pdev)600 static int imx_thermal_probe(struct platform_device *pdev)
601 {
602 struct imx_thermal_data *data;
603 struct regmap *map;
604 int measure_freq;
605 int ret;
606
607 data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
608 if (!data)
609 return -ENOMEM;
610
611 data->dev = &pdev->dev;
612
613 map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "fsl,tempmon");
614 if (IS_ERR(map)) {
615 ret = PTR_ERR(map);
616 dev_err(&pdev->dev, "failed to get tempmon regmap: %d\n", ret);
617 return ret;
618 }
619 data->tempmon = map;
620
621 data->socdata = of_device_get_match_data(&pdev->dev);
622 if (!data->socdata) {
623 dev_err(&pdev->dev, "no device match found\n");
624 return -ENODEV;
625 }
626
627 /* make sure the IRQ flag is clear before enabling irq on i.MX6SX */
628 if (data->socdata->version == TEMPMON_IMX6SX) {
629 regmap_write(map, IMX6_MISC1 + REG_CLR,
630 IMX6_MISC1_IRQ_TEMPHIGH | IMX6_MISC1_IRQ_TEMPLOW
631 | IMX6_MISC1_IRQ_TEMPPANIC);
632 /*
633 * reset value of LOW ALARM is incorrect, set it to lowest
634 * value to avoid false trigger of low alarm.
635 */
636 regmap_write(map, data->socdata->low_alarm_ctrl + REG_SET,
637 data->socdata->low_alarm_mask);
638 }
639
640 data->irq = platform_get_irq(pdev, 0);
641 if (data->irq < 0)
642 return data->irq;
643
644 platform_set_drvdata(pdev, data);
645
646 if (of_property_present(pdev->dev.of_node, "nvmem-cells")) {
647 ret = imx_init_from_nvmem_cells(pdev);
648 if (ret)
649 return dev_err_probe(&pdev->dev, ret,
650 "failed to init from nvmem\n");
651 } else {
652 ret = imx_init_from_tempmon_data(pdev);
653 if (ret) {
654 dev_err(&pdev->dev, "failed to init from fsl,tempmon-data\n");
655 return ret;
656 }
657 }
658
659 /* Make sure sensor is in known good state for measurements */
660 regmap_write(map, data->socdata->sensor_ctrl + REG_CLR,
661 data->socdata->power_down_mask);
662 regmap_write(map, data->socdata->sensor_ctrl + REG_CLR,
663 data->socdata->measure_temp_mask);
664 regmap_write(map, data->socdata->measure_freq_ctrl + REG_CLR,
665 data->socdata->measure_freq_mask);
666 if (data->socdata->version != TEMPMON_IMX7D)
667 regmap_write(map, IMX6_MISC0 + REG_SET,
668 IMX6_MISC0_REFTOP_SELBIASOFF);
669 regmap_write(map, data->socdata->sensor_ctrl + REG_SET,
670 data->socdata->power_down_mask);
671
672 ret = imx_thermal_register_legacy_cooling(data);
673 if (ret)
674 return dev_err_probe(&pdev->dev, ret,
675 "failed to register cpufreq cooling device\n");
676
677 data->thermal_clk = devm_clk_get(&pdev->dev, NULL);
678 if (IS_ERR(data->thermal_clk)) {
679 ret = PTR_ERR(data->thermal_clk);
680 if (ret != -EPROBE_DEFER)
681 dev_err(&pdev->dev,
682 "failed to get thermal clk: %d\n", ret);
683 goto legacy_cleanup;
684 }
685
686 /*
687 * Thermal sensor needs clk on to get correct value, normally
688 * we should enable its clk before taking measurement and disable
689 * clk after measurement is done, but if alarm function is enabled,
690 * hardware will auto measure the temperature periodically, so we
691 * need to keep the clk always on for alarm function.
692 */
693 ret = clk_prepare_enable(data->thermal_clk);
694 if (ret) {
695 dev_err(&pdev->dev, "failed to enable thermal clk: %d\n", ret);
696 goto legacy_cleanup;
697 }
698
699 data->tz = thermal_zone_device_register_with_trips("imx_thermal_zone",
700 trips,
701 ARRAY_SIZE(trips),
702 BIT(IMX_TRIP_PASSIVE), data,
703 &imx_tz_ops, NULL,
704 IMX_PASSIVE_DELAY,
705 IMX_POLLING_DELAY);
706 if (IS_ERR(data->tz)) {
707 ret = PTR_ERR(data->tz);
708 dev_err(&pdev->dev,
709 "failed to register thermal zone device %d\n", ret);
710 goto clk_disable;
711 }
712
713 dev_info(&pdev->dev, "%s CPU temperature grade - max:%dC"
714 " critical:%dC passive:%dC\n", data->temp_grade,
715 data->temp_max / 1000, trips[IMX_TRIP_CRITICAL].temperature / 1000,
716 trips[IMX_TRIP_PASSIVE].temperature / 1000);
717
718 /* Enable measurements at ~ 10 Hz */
719 regmap_write(map, data->socdata->measure_freq_ctrl + REG_CLR,
720 data->socdata->measure_freq_mask);
721 measure_freq = DIV_ROUND_UP(32768, 10); /* 10 Hz */
722 regmap_write(map, data->socdata->measure_freq_ctrl + REG_SET,
723 measure_freq << data->socdata->measure_freq_shift);
724 imx_set_alarm_temp(data, trips[IMX_TRIP_PASSIVE].temperature);
725
726 if (data->socdata->version == TEMPMON_IMX6SX)
727 imx_set_panic_temp(data, trips[IMX_TRIP_CRITICAL].temperature);
728
729 regmap_write(map, data->socdata->sensor_ctrl + REG_CLR,
730 data->socdata->power_down_mask);
731 regmap_write(map, data->socdata->sensor_ctrl + REG_SET,
732 data->socdata->measure_temp_mask);
733 /* After power up, we need a delay before first access can be done. */
734 usleep_range(20, 50);
735
736 /* the core was configured and enabled just before */
737 pm_runtime_set_active(&pdev->dev);
738 pm_runtime_enable(data->dev);
739
740 ret = pm_runtime_resume_and_get(data->dev);
741 if (ret < 0)
742 goto disable_runtime_pm;
743
744 data->irq_enabled = true;
745 ret = thermal_zone_device_enable(data->tz);
746 if (ret)
747 goto thermal_zone_unregister;
748
749 ret = devm_request_threaded_irq(&pdev->dev, data->irq,
750 imx_thermal_alarm_irq, imx_thermal_alarm_irq_thread,
751 0, "imx_thermal", data);
752 if (ret < 0) {
753 dev_err(&pdev->dev, "failed to request alarm irq: %d\n", ret);
754 goto thermal_zone_unregister;
755 }
756
757 pm_runtime_put(data->dev);
758
759 return 0;
760
761 thermal_zone_unregister:
762 thermal_zone_device_unregister(data->tz);
763 disable_runtime_pm:
764 pm_runtime_put_noidle(data->dev);
765 pm_runtime_disable(data->dev);
766 clk_disable:
767 clk_disable_unprepare(data->thermal_clk);
768 legacy_cleanup:
769 imx_thermal_unregister_legacy_cooling(data);
770
771 return ret;
772 }
773
imx_thermal_remove(struct platform_device * pdev)774 static int imx_thermal_remove(struct platform_device *pdev)
775 {
776 struct imx_thermal_data *data = platform_get_drvdata(pdev);
777
778 pm_runtime_put_noidle(data->dev);
779 pm_runtime_disable(data->dev);
780
781 thermal_zone_device_unregister(data->tz);
782 imx_thermal_unregister_legacy_cooling(data);
783
784 return 0;
785 }
786
imx_thermal_suspend(struct device * dev)787 static int __maybe_unused imx_thermal_suspend(struct device *dev)
788 {
789 struct imx_thermal_data *data = dev_get_drvdata(dev);
790 int ret;
791
792 /*
793 * Need to disable thermal sensor, otherwise, when thermal core
794 * try to get temperature before thermal sensor resume, a wrong
795 * temperature will be read as the thermal sensor is powered
796 * down. This is done in change_mode() operation called from
797 * thermal_zone_device_disable()
798 */
799 ret = thermal_zone_device_disable(data->tz);
800 if (ret)
801 return ret;
802
803 return pm_runtime_force_suspend(data->dev);
804 }
805
imx_thermal_resume(struct device * dev)806 static int __maybe_unused imx_thermal_resume(struct device *dev)
807 {
808 struct imx_thermal_data *data = dev_get_drvdata(dev);
809 int ret;
810
811 ret = pm_runtime_force_resume(data->dev);
812 if (ret)
813 return ret;
814 /* Enabled thermal sensor after resume */
815 return thermal_zone_device_enable(data->tz);
816 }
817
imx_thermal_runtime_suspend(struct device * dev)818 static int __maybe_unused imx_thermal_runtime_suspend(struct device *dev)
819 {
820 struct imx_thermal_data *data = dev_get_drvdata(dev);
821 const struct thermal_soc_data *socdata = data->socdata;
822 struct regmap *map = data->tempmon;
823 int ret;
824
825 ret = regmap_write(map, socdata->sensor_ctrl + REG_CLR,
826 socdata->measure_temp_mask);
827 if (ret)
828 return ret;
829
830 ret = regmap_write(map, socdata->sensor_ctrl + REG_SET,
831 socdata->power_down_mask);
832 if (ret)
833 return ret;
834
835 clk_disable_unprepare(data->thermal_clk);
836
837 return 0;
838 }
839
imx_thermal_runtime_resume(struct device * dev)840 static int __maybe_unused imx_thermal_runtime_resume(struct device *dev)
841 {
842 struct imx_thermal_data *data = dev_get_drvdata(dev);
843 const struct thermal_soc_data *socdata = data->socdata;
844 struct regmap *map = data->tempmon;
845 int ret;
846
847 ret = clk_prepare_enable(data->thermal_clk);
848 if (ret)
849 return ret;
850
851 ret = regmap_write(map, socdata->sensor_ctrl + REG_CLR,
852 socdata->power_down_mask);
853 if (ret)
854 return ret;
855
856 ret = regmap_write(map, socdata->sensor_ctrl + REG_SET,
857 socdata->measure_temp_mask);
858 if (ret)
859 return ret;
860
861 /*
862 * According to the temp sensor designers, it may require up to ~17us
863 * to complete a measurement.
864 */
865 usleep_range(20, 50);
866
867 return 0;
868 }
869
870 static const struct dev_pm_ops imx_thermal_pm_ops = {
871 SET_SYSTEM_SLEEP_PM_OPS(imx_thermal_suspend, imx_thermal_resume)
872 SET_RUNTIME_PM_OPS(imx_thermal_runtime_suspend,
873 imx_thermal_runtime_resume, NULL)
874 };
875
876 static struct platform_driver imx_thermal = {
877 .driver = {
878 .name = "imx_thermal",
879 .pm = &imx_thermal_pm_ops,
880 .of_match_table = of_imx_thermal_match,
881 },
882 .probe = imx_thermal_probe,
883 .remove = imx_thermal_remove,
884 };
885 module_platform_driver(imx_thermal);
886
887 MODULE_AUTHOR("Freescale Semiconductor, Inc.");
888 MODULE_DESCRIPTION("Thermal driver for Freescale i.MX SoCs");
889 MODULE_LICENSE("GPL v2");
890 MODULE_ALIAS("platform:imx-thermal");
891