1/*
2 * P1022/P1013 Silicon/SoC Device Tree Source (post include)
3 *
4 * Copyright 2011 Freescale Semiconductor Inc.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 *     * Redistributions of source code must retain the above copyright
9 *       notice, this list of conditions and the following disclaimer.
10 *     * Redistributions in binary form must reproduce the above copyright
11 *       notice, this list of conditions and the following disclaimer in the
12 *       documentation and/or other materials provided with the distribution.
13 *     * Neither the name of Freescale Semiconductor nor the
14 *       names of its contributors may be used to endorse or promote products
15 *       derived from this software without specific prior written permission.
16 *
17 *
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
21 * later version.
22 *
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35&lbc {
36	#address-cells = <2>;
37	#size-cells = <1>;
38	/*
39	 * The localbus on the P1022 is not a simple-bus because of the eLBC
40	 * pin muxing when the DIU is enabled.
41	 */
42	compatible = "fsl,p1022-elbc", "fsl,elbc";
43	interrupts = <19 2 0 0>,
44		     <16 2 0 0>;
45};
46
47/* controller at 0x9000 */
48&pci0 {
49	compatible = "fsl,mpc8548-pcie";
50	device_type = "pci";
51	#size-cells = <2>;
52	#address-cells = <3>;
53	bus-range = <0 255>;
54	clock-frequency = <33333333>;
55	interrupts = <16 2 0 0>;
56
57	pcie@0 {
58		reg = <0 0 0 0 0>;
59		#interrupt-cells = <1>;
60		#size-cells = <2>;
61		#address-cells = <3>;
62		device_type = "pci";
63		interrupts = <16 2 0 0>;
64		interrupt-map-mask = <0xf800 0 0 7>;
65		interrupt-map = <
66			/* IDSEL 0x0 */
67			0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
68			0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
69			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
70			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
71			>;
72	};
73};
74
75/* controller at 0xa000 */
76&pci1 {
77	compatible = "fsl,mpc8548-pcie";
78	device_type = "pci";
79	#size-cells = <2>;
80	#address-cells = <3>;
81	bus-range = <0 255>;
82	clock-frequency = <33333333>;
83	interrupts = <16 2 0 0>;
84
85	pcie@0 {
86		reg = <0 0 0 0 0>;
87		#interrupt-cells = <1>;
88		#size-cells = <2>;
89		#address-cells = <3>;
90		device_type = "pci";
91		interrupts = <16 2 0 0>;
92		interrupt-map-mask = <0xf800 0 0 7>;
93
94		interrupt-map = <
95			/* IDSEL 0x0 */
96			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
97			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
98			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
99			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
100			>;
101	};
102};
103
104/* controller at 0xb000 */
105&pci2 {
106	compatible = "fsl,mpc8548-pcie";
107	device_type = "pci";
108	#size-cells = <2>;
109	#address-cells = <3>;
110	bus-range = <0 255>;
111	clock-frequency = <33333333>;
112	interrupts = <16 2 0 0>;
113
114	pcie@0 {
115		reg = <0 0 0 0 0>;
116		#interrupt-cells = <1>;
117		#size-cells = <2>;
118		#address-cells = <3>;
119		device_type = "pci";
120		interrupts = <16 2 0 0>;
121		interrupt-map-mask = <0xf800 0 0 7>;
122
123		interrupt-map = <
124			/* IDSEL 0x0 */
125			0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
126			0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
127			0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
128			0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
129			>;
130	};
131};
132
133&soc {
134	#address-cells = <1>;
135	#size-cells = <1>;
136	device_type = "soc";
137	compatible = "fsl,p1022-immr", "simple-bus";
138	bus-frequency = <0>;		// Filled out by uboot.
139
140	ecm-law@0 {
141		compatible = "fsl,ecm-law";
142		reg = <0x0 0x1000>;
143		fsl,num-laws = <12>;
144	};
145
146	ecm@1000 {
147		compatible = "fsl,p1022-ecm", "fsl,ecm";
148		reg = <0x1000 0x1000>;
149		interrupts = <16 2 0 0>;
150	};
151
152	memory-controller@2000 {
153		compatible = "fsl,p1022-memory-controller";
154		reg = <0x2000 0x1000>;
155		interrupts = <16 2 0 0>;
156	};
157
158/include/ "pq3-i2c-0.dtsi"
159/include/ "pq3-i2c-1.dtsi"
160/include/ "pq3-duart-0.dtsi"
161/include/ "pq3-espi-0.dtsi"
162	spi@7000 {
163		fsl,espi-num-chipselects = <4>;
164	};
165
166/include/ "pq3-dma-1.dtsi"
167	dma@c300 {
168		dma00: dma-channel@0 {
169			compatible = "fsl,ssi-dma-channel";
170		};
171		dma01: dma-channel@80 {
172			compatible = "fsl,ssi-dma-channel";
173		};
174	};
175
176/include/ "pq3-gpio-0.dtsi"
177
178	display: display@10000 {
179		compatible = "fsl,diu", "fsl,p1022-diu";
180		reg = <0x10000 1000>;
181		interrupts = <64 2 0 0>;
182	};
183
184	ssi@15000 {
185		compatible = "fsl,mpc8610-ssi";
186		cell-index = <0>;
187		reg = <0x15000 0x100>;
188		interrupts = <75 2 0 0>;
189		fsl,playback-dma = <&dma00>;
190		fsl,capture-dma = <&dma01>;
191		fsl,fifo-depth = <15>;
192	};
193
194/include/ "pq3-sata2-0.dtsi"
195/include/ "pq3-sata2-1.dtsi"
196
197	L2: l2-cache-controller@20000 {
198		compatible = "fsl,p1022-l2-cache-controller";
199		reg = <0x20000 0x1000>;
200		cache-line-size = <32>;	// 32 bytes
201		cache-size = <0x40000>; // L2,256K
202		interrupts = <16 2 0 0>;
203	};
204
205/include/ "pq3-dma-0.dtsi"
206/include/ "pq3-usb2-dr-0.dtsi"
207	usb@22000 {
208		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
209	};
210/include/ "pq3-usb2-dr-1.dtsi"
211	usb@23000 {
212		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
213	};
214
215/include/ "pq3-esdhc-0.dtsi"
216	sdhc@2e000 {
217		compatible = "fsl,p1022-esdhc", "fsl,esdhc";
218		sdhci,auto-cmd12;
219	};
220
221/include/ "pq3-sec3.3-0.dtsi"
222/include/ "pq3-mpic.dtsi"
223/include/ "pq3-mpic-timer-B.dtsi"
224
225/include/ "pq3-etsec2-0.dtsi"
226	enet0: enet0_grp2: ethernet@b0000 {
227		fsl,wake-on-filer;
228	};
229
230/include/ "pq3-etsec2-1.dtsi"
231	enet1: enet1_grp2: ethernet@b1000 {
232		fsl,wake-on-filer;
233	};
234
235	global-utilities@e0000 {
236		compatible = "fsl,p1022-guts";
237		reg = <0xe0000 0x1000>;
238		fsl,has-rstcr;
239	};
240
241	power@e0070 {
242		compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
243		reg = <0xe0070 0x20>;
244	};
245
246};
247
248/include/ "pq3-etsec2-grp2-0.dtsi"
249/include/ "pq3-etsec2-grp2-1.dtsi"
250