1 /*
2 * This is the Fusion MPT base driver providing common API layer interface
3 * for access to MPT (Message Passing Technology) firmware.
4 *
5 * This code is based on drivers/scsi/mpt3sas/mpt3sas_base.h
6 * Copyright (C) 2012-2014 LSI Corporation
7 * Copyright (C) 2013-2014 Avago Technologies
8 * (mailto: MPT-FusionLinux.pdl@avagotech.com)
9 *
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License
12 * as published by the Free Software Foundation; either version 2
13 * of the License, or (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * NO WARRANTY
21 * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
22 * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
23 * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
24 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
25 * solely responsible for determining the appropriateness of using and
26 * distributing the Program and assumes all risks associated with its
27 * exercise of rights under this Agreement, including but not limited to
28 * the risks and costs of program errors, damage to or loss of data,
29 * programs or equipment, and unavailability or interruption of operations.
30
31 * DISCLAIMER OF LIABILITY
32 * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
33 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
34 * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
35 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
36 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
37 * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
38 * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
39
40 * You should have received a copy of the GNU General Public License
41 * along with this program; if not, write to the Free Software
42 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
43 * USA.
44 */
45
46 #ifndef MPT3SAS_BASE_H_INCLUDED
47 #define MPT3SAS_BASE_H_INCLUDED
48
49 #include "mpi/mpi2_type.h"
50 #include "mpi/mpi2.h"
51 #include "mpi/mpi2_ioc.h"
52 #include "mpi/mpi2_cnfg.h"
53 #include "mpi/mpi2_init.h"
54 #include "mpi/mpi2_raid.h"
55 #include "mpi/mpi2_tool.h"
56 #include "mpi/mpi2_sas.h"
57 #include "mpi/mpi2_pci.h"
58 #include "mpi/mpi2_image.h"
59
60 #include <scsi/scsi.h>
61 #include <scsi/scsi_cmnd.h>
62 #include <scsi/scsi_device.h>
63 #include <scsi/scsi_host.h>
64 #include <scsi/scsi_tcq.h>
65 #include <scsi/scsi_transport_sas.h>
66 #include <scsi/scsi_dbg.h>
67 #include <scsi/scsi_eh.h>
68 #include <linux/pci.h>
69 #include <linux/poll.h>
70 #include <linux/irq_poll.h>
71
72 #include "mpt3sas_debug.h"
73 #include "mpt3sas_trigger_diag.h"
74 #include "mpt3sas_trigger_pages.h"
75
76 /* driver versioning info */
77 #define MPT3SAS_DRIVER_NAME "mpt3sas"
78 #define MPT3SAS_AUTHOR "Avago Technologies <MPT-FusionLinux.pdl@avagotech.com>"
79 #define MPT3SAS_DESCRIPTION "LSI MPT Fusion SAS 3.0 Device Driver"
80 #define MPT3SAS_DRIVER_VERSION "43.100.00.00"
81 #define MPT3SAS_MAJOR_VERSION 43
82 #define MPT3SAS_MINOR_VERSION 100
83 #define MPT3SAS_BUILD_VERSION 0
84 #define MPT3SAS_RELEASE_VERSION 00
85
86 #define MPT2SAS_DRIVER_NAME "mpt2sas"
87 #define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver"
88 #define MPT2SAS_DRIVER_VERSION "20.102.00.00"
89 #define MPT2SAS_MAJOR_VERSION 20
90 #define MPT2SAS_MINOR_VERSION 102
91 #define MPT2SAS_BUILD_VERSION 0
92 #define MPT2SAS_RELEASE_VERSION 00
93
94 /* CoreDump: Default timeout */
95 #define MPT3SAS_DEFAULT_COREDUMP_TIMEOUT_SECONDS (15) /*15 seconds*/
96 #define MPT3SAS_COREDUMP_LOOP_DONE (0xFF)
97 #define MPT3SAS_TIMESYNC_TIMEOUT_SECONDS (10) /* 10 seconds */
98 #define MPT3SAS_TIMESYNC_UPDATE_INTERVAL (900) /* 15 minutes */
99 #define MPT3SAS_TIMESYNC_UNIT_MASK (0x80) /* bit 7 */
100 #define MPT3SAS_TIMESYNC_MASK (0x7F) /* 0 - 6 bits */
101 #define SECONDS_PER_MIN (60)
102 #define SECONDS_PER_HOUR (3600)
103 #define MPT3SAS_COREDUMP_LOOP_DONE (0xFF)
104 #define MPI26_SET_IOC_PARAMETER_SYNC_TIMESTAMP (0x81)
105
106 /*
107 * Set MPT3SAS_SG_DEPTH value based on user input.
108 */
109 #define MPT_MAX_PHYS_SEGMENTS SG_CHUNK_SIZE
110 #define MPT_MIN_PHYS_SEGMENTS 16
111 #define MPT_KDUMP_MIN_PHYS_SEGMENTS 32
112
113 #define MCPU_MAX_CHAINS_PER_IO 3
114
115 #ifdef CONFIG_SCSI_MPT3SAS_MAX_SGE
116 #define MPT3SAS_SG_DEPTH CONFIG_SCSI_MPT3SAS_MAX_SGE
117 #else
118 #define MPT3SAS_SG_DEPTH MPT_MAX_PHYS_SEGMENTS
119 #endif
120
121 #ifdef CONFIG_SCSI_MPT2SAS_MAX_SGE
122 #define MPT2SAS_SG_DEPTH CONFIG_SCSI_MPT2SAS_MAX_SGE
123 #else
124 #define MPT2SAS_SG_DEPTH MPT_MAX_PHYS_SEGMENTS
125 #endif
126
127 /*
128 * Generic Defines
129 */
130 #define MPT3SAS_SATA_QUEUE_DEPTH 32
131 #define MPT3SAS_SAS_QUEUE_DEPTH 254
132 #define MPT3SAS_RAID_QUEUE_DEPTH 128
133 #define MPT3SAS_KDUMP_SCSI_IO_DEPTH 200
134
135 #define MPT3SAS_RAID_MAX_SECTORS 8192
136 #define MPT3SAS_HOST_PAGE_SIZE_4K 12
137 #define MPT3SAS_NVME_QUEUE_DEPTH 128
138 #define MPT_NAME_LENGTH 32 /* generic length of strings */
139 #define MPT_STRING_LENGTH 64
140 #define MPI_FRAME_START_OFFSET 256
141 #define REPLY_FREE_POOL_SIZE 512 /*(32 maxcredix *4)*(4 times)*/
142
143 #define MPT_MAX_CALLBACKS 32
144
145 #define MPT_MAX_HBA_NUM_PHYS 32
146
147 #define INTERNAL_CMDS_COUNT 10 /* reserved cmds */
148 /* reserved for issuing internally framed scsi io cmds */
149 #define INTERNAL_SCSIIO_CMDS_COUNT 3
150
151 #define MPI3_HIM_MASK 0xFFFFFFFF /* mask every bit*/
152
153 #define MPT3SAS_INVALID_DEVICE_HANDLE 0xFFFF
154
155 #define MAX_CHAIN_ELEMT_SZ 16
156 #define DEFAULT_NUM_FWCHAIN_ELEMTS 8
157
158 #define IO_UNIT_CONTROL_SHUTDOWN_TIMEOUT 6
159 #define FW_IMG_HDR_READ_TIMEOUT 15
160
161 #define IOC_OPERATIONAL_WAIT_COUNT 10
162
163 /*
164 * NVMe defines
165 */
166 #define NVME_PRP_SIZE 8 /* PRP size */
167 #define NVME_ERROR_RESPONSE_SIZE 16 /* Max NVME Error Response */
168 #define NVME_TASK_ABORT_MIN_TIMEOUT 6
169 #define NVME_TASK_ABORT_MAX_TIMEOUT 60
170 #define NVME_TASK_MNGT_CUSTOM_MASK (0x0010)
171 #define NVME_PRP_PAGE_SIZE 4096 /* Page size */
172
173 struct mpt3sas_nvme_cmd {
174 u8 rsvd[24];
175 __le64 prp1;
176 __le64 prp2;
177 };
178
179 /*
180 * logging format
181 */
182 #define ioc_err(ioc, fmt, ...) \
183 pr_err("%s: " fmt, (ioc)->name, ##__VA_ARGS__)
184 #define ioc_notice(ioc, fmt, ...) \
185 pr_notice("%s: " fmt, (ioc)->name, ##__VA_ARGS__)
186 #define ioc_warn(ioc, fmt, ...) \
187 pr_warn("%s: " fmt, (ioc)->name, ##__VA_ARGS__)
188 #define ioc_info(ioc, fmt, ...) \
189 pr_info("%s: " fmt, (ioc)->name, ##__VA_ARGS__)
190
191 /*
192 * WarpDrive Specific Log codes
193 */
194
195 #define MPT2_WARPDRIVE_LOGENTRY (0x8002)
196 #define MPT2_WARPDRIVE_LC_SSDT (0x41)
197 #define MPT2_WARPDRIVE_LC_SSDLW (0x43)
198 #define MPT2_WARPDRIVE_LC_SSDLF (0x44)
199 #define MPT2_WARPDRIVE_LC_BRMF (0x4D)
200
201 /*
202 * per target private data
203 */
204 #define MPT_TARGET_FLAGS_RAID_COMPONENT 0x01
205 #define MPT_TARGET_FLAGS_VOLUME 0x02
206 #define MPT_TARGET_FLAGS_DELETED 0x04
207 #define MPT_TARGET_FASTPATH_IO 0x08
208 #define MPT_TARGET_FLAGS_PCIE_DEVICE 0x10
209
210 #define SAS2_PCI_DEVICE_B0_REVISION (0x01)
211 #define SAS3_PCI_DEVICE_C0_REVISION (0x02)
212
213 /* Atlas PCIe Switch Management Port */
214 #define MPI26_ATLAS_PCIe_SWITCH_DEVID (0x00B2)
215
216 /*
217 * Intel HBA branding
218 */
219 #define MPT2SAS_INTEL_RMS25JB080_BRANDING \
220 "Intel(R) Integrated RAID Module RMS25JB080"
221 #define MPT2SAS_INTEL_RMS25JB040_BRANDING \
222 "Intel(R) Integrated RAID Module RMS25JB040"
223 #define MPT2SAS_INTEL_RMS25KB080_BRANDING \
224 "Intel(R) Integrated RAID Module RMS25KB080"
225 #define MPT2SAS_INTEL_RMS25KB040_BRANDING \
226 "Intel(R) Integrated RAID Module RMS25KB040"
227 #define MPT2SAS_INTEL_RMS25LB040_BRANDING \
228 "Intel(R) Integrated RAID Module RMS25LB040"
229 #define MPT2SAS_INTEL_RMS25LB080_BRANDING \
230 "Intel(R) Integrated RAID Module RMS25LB080"
231 #define MPT2SAS_INTEL_RMS2LL080_BRANDING \
232 "Intel Integrated RAID Module RMS2LL080"
233 #define MPT2SAS_INTEL_RMS2LL040_BRANDING \
234 "Intel Integrated RAID Module RMS2LL040"
235 #define MPT2SAS_INTEL_RS25GB008_BRANDING \
236 "Intel(R) RAID Controller RS25GB008"
237 #define MPT2SAS_INTEL_SSD910_BRANDING \
238 "Intel(R) SSD 910 Series"
239
240 #define MPT3SAS_INTEL_RMS3JC080_BRANDING \
241 "Intel(R) Integrated RAID Module RMS3JC080"
242 #define MPT3SAS_INTEL_RS3GC008_BRANDING \
243 "Intel(R) RAID Controller RS3GC008"
244 #define MPT3SAS_INTEL_RS3FC044_BRANDING \
245 "Intel(R) RAID Controller RS3FC044"
246 #define MPT3SAS_INTEL_RS3UC080_BRANDING \
247 "Intel(R) RAID Controller RS3UC080"
248
249 /*
250 * Intel HBA SSDIDs
251 */
252 #define MPT2SAS_INTEL_RMS25JB080_SSDID 0x3516
253 #define MPT2SAS_INTEL_RMS25JB040_SSDID 0x3517
254 #define MPT2SAS_INTEL_RMS25KB080_SSDID 0x3518
255 #define MPT2SAS_INTEL_RMS25KB040_SSDID 0x3519
256 #define MPT2SAS_INTEL_RMS25LB040_SSDID 0x351A
257 #define MPT2SAS_INTEL_RMS25LB080_SSDID 0x351B
258 #define MPT2SAS_INTEL_RMS2LL080_SSDID 0x350E
259 #define MPT2SAS_INTEL_RMS2LL040_SSDID 0x350F
260 #define MPT2SAS_INTEL_RS25GB008_SSDID 0x3000
261 #define MPT2SAS_INTEL_SSD910_SSDID 0x3700
262
263 #define MPT3SAS_INTEL_RMS3JC080_SSDID 0x3521
264 #define MPT3SAS_INTEL_RS3GC008_SSDID 0x3522
265 #define MPT3SAS_INTEL_RS3FC044_SSDID 0x3523
266 #define MPT3SAS_INTEL_RS3UC080_SSDID 0x3524
267
268 /*
269 * Dell HBA branding
270 */
271 #define MPT2SAS_DELL_BRANDING_SIZE 32
272
273 #define MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING "Dell 6Gbps SAS HBA"
274 #define MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING "Dell PERC H200 Adapter"
275 #define MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING "Dell PERC H200 Integrated"
276 #define MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING "Dell PERC H200 Modular"
277 #define MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING "Dell PERC H200 Embedded"
278 #define MPT2SAS_DELL_PERC_H200_BRANDING "Dell PERC H200"
279 #define MPT2SAS_DELL_6GBPS_SAS_BRANDING "Dell 6Gbps SAS"
280
281 #define MPT3SAS_DELL_12G_HBA_BRANDING \
282 "Dell 12Gbps HBA"
283
284 /*
285 * Dell HBA SSDIDs
286 */
287 #define MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID 0x1F1C
288 #define MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID 0x1F1D
289 #define MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID 0x1F1E
290 #define MPT2SAS_DELL_PERC_H200_MODULAR_SSDID 0x1F1F
291 #define MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID 0x1F20
292 #define MPT2SAS_DELL_PERC_H200_SSDID 0x1F21
293 #define MPT2SAS_DELL_6GBPS_SAS_SSDID 0x1F22
294
295 #define MPT3SAS_DELL_12G_HBA_SSDID 0x1F46
296
297 /*
298 * Cisco HBA branding
299 */
300 #define MPT3SAS_CISCO_12G_8E_HBA_BRANDING \
301 "Cisco 9300-8E 12G SAS HBA"
302 #define MPT3SAS_CISCO_12G_8I_HBA_BRANDING \
303 "Cisco 9300-8i 12G SAS HBA"
304 #define MPT3SAS_CISCO_12G_AVILA_HBA_BRANDING \
305 "Cisco 12G Modular SAS Pass through Controller"
306 #define MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_BRANDING \
307 "UCS C3X60 12G SAS Pass through Controller"
308 /*
309 * Cisco HBA SSSDIDs
310 */
311 #define MPT3SAS_CISCO_12G_8E_HBA_SSDID 0x14C
312 #define MPT3SAS_CISCO_12G_8I_HBA_SSDID 0x154
313 #define MPT3SAS_CISCO_12G_AVILA_HBA_SSDID 0x155
314 #define MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_SSDID 0x156
315
316 /*
317 * status bits for ioc->diag_buffer_status
318 */
319 #define MPT3_DIAG_BUFFER_IS_REGISTERED (0x01)
320 #define MPT3_DIAG_BUFFER_IS_RELEASED (0x02)
321 #define MPT3_DIAG_BUFFER_IS_DIAG_RESET (0x04)
322 #define MPT3_DIAG_BUFFER_IS_DRIVER_ALLOCATED (0x08)
323 #define MPT3_DIAG_BUFFER_IS_APP_OWNED (0x10)
324
325 /*
326 * HP HBA branding
327 */
328 #define MPT2SAS_HP_3PAR_SSVID 0x1590
329
330 #define MPT2SAS_HP_2_4_INTERNAL_BRANDING \
331 "HP H220 Host Bus Adapter"
332 #define MPT2SAS_HP_2_4_EXTERNAL_BRANDING \
333 "HP H221 Host Bus Adapter"
334 #define MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_BRANDING \
335 "HP H222 Host Bus Adapter"
336 #define MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_BRANDING \
337 "HP H220i Host Bus Adapter"
338 #define MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_BRANDING \
339 "HP H210i Host Bus Adapter"
340
341 /*
342 * HO HBA SSDIDs
343 */
344 #define MPT2SAS_HP_2_4_INTERNAL_SSDID 0x0041
345 #define MPT2SAS_HP_2_4_EXTERNAL_SSDID 0x0042
346 #define MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_SSDID 0x0043
347 #define MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_SSDID 0x0044
348 #define MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_SSDID 0x0046
349
350 /*
351 * Combined Reply Queue constants,
352 * There are twelve Supplemental Reply Post Host Index Registers
353 * and each register is at offset 0x10 bytes from the previous one.
354 */
355 #define MAX_COMBINED_MSIX_VECTORS(gen35) ((gen35 == 1) ? 16 : 8)
356 #define MPT3_SUP_REPLY_POST_HOST_INDEX_REG_COUNT_G3 12
357 #define MPT3_SUP_REPLY_POST_HOST_INDEX_REG_COUNT_G35 16
358 #define MPT3_SUP_REPLY_POST_HOST_INDEX_REG_OFFSET (0x10)
359 #define MPT3_MIN_IRQS 1
360
361 /* OEM Identifiers */
362 #define MFG10_OEM_ID_INVALID (0x00000000)
363 #define MFG10_OEM_ID_DELL (0x00000001)
364 #define MFG10_OEM_ID_FSC (0x00000002)
365 #define MFG10_OEM_ID_SUN (0x00000003)
366 #define MFG10_OEM_ID_IBM (0x00000004)
367
368 /* GENERIC Flags 0*/
369 #define MFG10_GF0_OCE_DISABLED (0x00000001)
370 #define MFG10_GF0_R1E_DRIVE_COUNT (0x00000002)
371 #define MFG10_GF0_R10_DISPLAY (0x00000004)
372 #define MFG10_GF0_SSD_DATA_SCRUB_DISABLE (0x00000008)
373 #define MFG10_GF0_SINGLE_DRIVE_R0 (0x00000010)
374
375 #define VIRTUAL_IO_FAILED_RETRY (0x32010081)
376
377 /* High IOPs definitions */
378 #define MPT3SAS_DEVICE_HIGH_IOPS_DEPTH 8
379 #define MPT3SAS_HIGH_IOPS_REPLY_QUEUES 8
380 #define MPT3SAS_HIGH_IOPS_BATCH_COUNT 16
381 #define MPT3SAS_GEN35_MAX_MSIX_QUEUES 128
382 #define RDPQ_MAX_INDEX_IN_ONE_CHUNK 16
383
384 /* OEM Specific Flags will come from OEM specific header files */
385 struct Mpi2ManufacturingPage10_t {
386 MPI2_CONFIG_PAGE_HEADER Header; /* 00h */
387 U8 OEMIdentifier; /* 04h */
388 U8 Reserved1; /* 05h */
389 U16 Reserved2; /* 08h */
390 U32 Reserved3; /* 0Ch */
391 U32 GenericFlags0; /* 10h */
392 U32 GenericFlags1; /* 14h */
393 U32 Reserved4; /* 18h */
394 U32 OEMSpecificFlags0; /* 1Ch */
395 U32 OEMSpecificFlags1; /* 20h */
396 U32 Reserved5[18]; /* 24h - 60h*/
397 };
398
399
400 /* Miscellaneous options */
401 struct Mpi2ManufacturingPage11_t {
402 MPI2_CONFIG_PAGE_HEADER Header; /* 00h */
403 __le32 Reserved1; /* 04h */
404 u8 Reserved2; /* 08h */
405 u8 EEDPTagMode; /* 09h */
406 u8 Reserved3; /* 0Ah */
407 u8 Reserved4; /* 0Bh */
408 __le32 Reserved5[8]; /* 0Ch-2Ch */
409 u16 AddlFlags2; /* 2Ch */
410 u8 AddlFlags3; /* 2Eh */
411 u8 Reserved6; /* 2Fh */
412 __le32 Reserved7[7]; /* 30h - 4Bh */
413 u8 NVMeAbortTO; /* 4Ch */
414 u8 NumPerDevEvents; /* 4Dh */
415 u8 HostTraceBufferDecrementSizeKB; /* 4Eh */
416 u8 HostTraceBufferFlags; /* 4Fh */
417 u16 HostTraceBufferMaxSizeKB; /* 50h */
418 u16 HostTraceBufferMinSizeKB; /* 52h */
419 u8 CoreDumpTOSec; /* 54h */
420 u8 TimeSyncInterval; /* 55h */
421 u16 Reserved9; /* 56h */
422 __le32 Reserved10; /* 58h */
423 };
424
425 /**
426 * struct MPT3SAS_TARGET - starget private hostdata
427 * @starget: starget object
428 * @sas_address: target sas address
429 * @raid_device: raid_device pointer to access volume data
430 * @handle: device handle
431 * @num_luns: number luns
432 * @flags: MPT_TARGET_FLAGS_XXX flags
433 * @deleted: target flaged for deletion
434 * @tm_busy: target is busy with TM request.
435 * @port: hba port entry containing target's port number info
436 * @sas_dev: The sas_device associated with this target
437 * @pcie_dev: The pcie device associated with this target
438 */
439 struct MPT3SAS_TARGET {
440 struct scsi_target *starget;
441 u64 sas_address;
442 struct _raid_device *raid_device;
443 u16 handle;
444 int num_luns;
445 u32 flags;
446 u8 deleted;
447 u8 tm_busy;
448 struct hba_port *port;
449 struct _sas_device *sas_dev;
450 struct _pcie_device *pcie_dev;
451 };
452
453
454 /*
455 * per device private data
456 */
457 #define MPT_DEVICE_FLAGS_INIT 0x01
458
459 #define MFG_PAGE10_HIDE_SSDS_MASK (0x00000003)
460 #define MFG_PAGE10_HIDE_ALL_DISKS (0x00)
461 #define MFG_PAGE10_EXPOSE_ALL_DISKS (0x01)
462 #define MFG_PAGE10_HIDE_IF_VOL_PRESENT (0x02)
463
464 /**
465 * struct MPT3SAS_DEVICE - sdev private hostdata
466 * @sas_target: starget private hostdata
467 * @lun: lun number
468 * @flags: MPT_DEVICE_XXX flags
469 * @configured_lun: lun is configured
470 * @block: device is in SDEV_BLOCK state
471 * @tlr_snoop_check: flag used in determining whether to disable TLR
472 * @eedp_enable: eedp support enable bit
473 * @eedp_type: 0(type_1), 1(type_2), 2(type_3)
474 * @eedp_block_length: block size
475 * @ata_command_pending: SATL passthrough outstanding for device
476 */
477 struct MPT3SAS_DEVICE {
478 struct MPT3SAS_TARGET *sas_target;
479 unsigned int lun;
480 u32 flags;
481 u8 configured_lun;
482 u8 block;
483 u8 tlr_snoop_check;
484 u8 ignore_delay_remove;
485 /* Iopriority Command Handling */
486 u8 ncq_prio_enable;
487 /*
488 * Bug workaround for SATL handling: the mpt2/3sas firmware
489 * doesn't return BUSY or TASK_SET_FULL for subsequent
490 * commands while a SATL pass through is in operation as the
491 * spec requires, it simply does nothing with them until the
492 * pass through completes, causing them possibly to timeout if
493 * the passthrough is a long executing command (like format or
494 * secure erase). This variable allows us to do the right
495 * thing while a SATL command is pending.
496 */
497 unsigned long ata_command_pending;
498
499 };
500
501 #define MPT3_CMD_NOT_USED 0x8000 /* free */
502 #define MPT3_CMD_COMPLETE 0x0001 /* completed */
503 #define MPT3_CMD_PENDING 0x0002 /* pending */
504 #define MPT3_CMD_REPLY_VALID 0x0004 /* reply is valid */
505 #define MPT3_CMD_RESET 0x0008 /* host reset dropped the command */
506 #define MPT3_CMD_COMPLETE_ASYNC 0x0010 /* tells whether cmd completes in same thread or not */
507
508 /**
509 * struct _internal_cmd - internal commands struct
510 * @mutex: mutex
511 * @done: completion
512 * @reply: reply message pointer
513 * @sense: sense data
514 * @status: MPT3_CMD_XXX status
515 * @smid: system message id
516 */
517 struct _internal_cmd {
518 struct mutex mutex;
519 struct completion done;
520 void *reply;
521 void *sense;
522 u16 status;
523 u16 smid;
524 };
525
526
527
528 /**
529 * struct _sas_device - attached device information
530 * @list: sas device list
531 * @starget: starget object
532 * @sas_address: device sas address
533 * @device_name: retrieved from the SAS IDENTIFY frame.
534 * @handle: device handle
535 * @sas_address_parent: sas address of parent expander or sas host
536 * @enclosure_handle: enclosure handle
537 * @enclosure_logical_id: enclosure logical identifier
538 * @volume_handle: volume handle (valid when hidden raid member)
539 * @volume_wwid: volume unique identifier
540 * @device_info: bitfield provides detailed info about the device
541 * @id: target id
542 * @channel: target channel
543 * @slot: number number
544 * @phy: phy identifier provided in sas device page 0
545 * @responding: used in _scsih_sas_device_mark_responding
546 * @fast_path: fast path feature enable bit
547 * @pfa_led_on: flag for PFA LED status
548 * @pend_sas_rphy_add: flag to check if device is in sas_rphy_add()
549 * addition routine.
550 * @chassis_slot: chassis slot
551 * @is_chassis_slot_valid: chassis slot valid or not
552 * @port: hba port entry containing device's port number info
553 * @rphy: device's sas_rphy address used to identify this device structure in
554 * target_alloc callback function
555 */
556 struct _sas_device {
557 struct list_head list;
558 struct scsi_target *starget;
559 u64 sas_address;
560 u64 device_name;
561 u16 handle;
562 u64 sas_address_parent;
563 u16 enclosure_handle;
564 u64 enclosure_logical_id;
565 u16 volume_handle;
566 u64 volume_wwid;
567 u32 device_info;
568 int id;
569 int channel;
570 u16 slot;
571 u8 phy;
572 u8 responding;
573 u8 fast_path;
574 u8 pfa_led_on;
575 u8 pend_sas_rphy_add;
576 u8 enclosure_level;
577 u8 chassis_slot;
578 u8 is_chassis_slot_valid;
579 u8 connector_name[5];
580 struct kref refcount;
581 u8 port_type;
582 struct hba_port *port;
583 struct sas_rphy *rphy;
584 };
585
sas_device_get(struct _sas_device * s)586 static inline void sas_device_get(struct _sas_device *s)
587 {
588 kref_get(&s->refcount);
589 }
590
sas_device_free(struct kref * r)591 static inline void sas_device_free(struct kref *r)
592 {
593 kfree(container_of(r, struct _sas_device, refcount));
594 }
595
sas_device_put(struct _sas_device * s)596 static inline void sas_device_put(struct _sas_device *s)
597 {
598 kref_put(&s->refcount, sas_device_free);
599 }
600
601 /*
602 * struct _pcie_device - attached PCIe device information
603 * @list: pcie device list
604 * @starget: starget object
605 * @wwid: device WWID
606 * @handle: device handle
607 * @device_info: bitfield provides detailed info about the device
608 * @id: target id
609 * @channel: target channel
610 * @slot: slot number
611 * @port_num: port number
612 * @responding: used in _scsih_pcie_device_mark_responding
613 * @fast_path: fast path feature enable bit
614 * @nvme_mdts: MaximumDataTransferSize from PCIe Device Page 2 for
615 * NVMe device only
616 * @enclosure_handle: enclosure handle
617 * @enclosure_logical_id: enclosure logical identifier
618 * @enclosure_level: The level of device's enclosure from the controller
619 * @connector_name: ASCII value of the Connector's name
620 * @serial_number: pointer of serial number string allocated runtime
621 * @access_status: Device's Access Status
622 * @shutdown_latency: NVMe device's RTD3 Entry Latency
623 * @refcount: reference count for deletion
624 */
625 struct _pcie_device {
626 struct list_head list;
627 struct scsi_target *starget;
628 u64 wwid;
629 u16 handle;
630 u32 device_info;
631 int id;
632 int channel;
633 u16 slot;
634 u8 port_num;
635 u8 responding;
636 u8 fast_path;
637 u32 nvme_mdts;
638 u16 enclosure_handle;
639 u64 enclosure_logical_id;
640 u8 enclosure_level;
641 u8 connector_name[4];
642 u8 *serial_number;
643 u8 reset_timeout;
644 u8 access_status;
645 u16 shutdown_latency;
646 struct kref refcount;
647 };
648 /**
649 * pcie_device_get - Increment the pcie device reference count
650 *
651 * @p: pcie_device object
652 *
653 * When ever this function called it will increment the
654 * reference count of the pcie device for which this function called.
655 *
656 */
pcie_device_get(struct _pcie_device * p)657 static inline void pcie_device_get(struct _pcie_device *p)
658 {
659 kref_get(&p->refcount);
660 }
661
662 /**
663 * pcie_device_free - Release the pcie device object
664 * @r - kref object
665 *
666 * Free's the pcie device object. It will be called when reference count
667 * reaches to zero.
668 */
pcie_device_free(struct kref * r)669 static inline void pcie_device_free(struct kref *r)
670 {
671 kfree(container_of(r, struct _pcie_device, refcount));
672 }
673
674 /**
675 * pcie_device_put - Decrement the pcie device reference count
676 *
677 * @p: pcie_device object
678 *
679 * When ever this function called it will decrement the
680 * reference count of the pcie device for which this function called.
681 *
682 * When refernce count reaches to Zero, this will call pcie_device_free to the
683 * pcie_device object.
684 */
pcie_device_put(struct _pcie_device * p)685 static inline void pcie_device_put(struct _pcie_device *p)
686 {
687 kref_put(&p->refcount, pcie_device_free);
688 }
689 /**
690 * struct _raid_device - raid volume link list
691 * @list: sas device list
692 * @starget: starget object
693 * @sdev: scsi device struct (volumes are single lun)
694 * @wwid: unique identifier for the volume
695 * @handle: device handle
696 * @block_size: Block size of the volume
697 * @id: target id
698 * @channel: target channel
699 * @volume_type: the raid level
700 * @device_info: bitfield provides detailed info about the hidden components
701 * @num_pds: number of hidden raid components
702 * @responding: used in _scsih_raid_device_mark_responding
703 * @percent_complete: resync percent complete
704 * @direct_io_enabled: Whether direct io to PDs are allowed or not
705 * @stripe_exponent: X where 2powX is the stripe sz in blocks
706 * @block_exponent: X where 2powX is the block sz in bytes
707 * @max_lba: Maximum number of LBA in the volume
708 * @stripe_sz: Stripe Size of the volume
709 * @device_info: Device info of the volume member disk
710 * @pd_handle: Array of handles of the physical drives for direct I/O in le16
711 */
712 #define MPT_MAX_WARPDRIVE_PDS 8
713 struct _raid_device {
714 struct list_head list;
715 struct scsi_target *starget;
716 struct scsi_device *sdev;
717 u64 wwid;
718 u16 handle;
719 u16 block_sz;
720 int id;
721 int channel;
722 u8 volume_type;
723 u8 num_pds;
724 u8 responding;
725 u8 percent_complete;
726 u8 direct_io_enabled;
727 u8 stripe_exponent;
728 u8 block_exponent;
729 u64 max_lba;
730 u32 stripe_sz;
731 u32 device_info;
732 u16 pd_handle[MPT_MAX_WARPDRIVE_PDS];
733 };
734
735 /**
736 * struct _boot_device - boot device info
737 *
738 * @channel: sas, raid, or pcie channel
739 * @device: holds pointer for struct _sas_device, struct _raid_device or
740 * struct _pcie_device
741 */
742 struct _boot_device {
743 int channel;
744 void *device;
745 };
746
747 /**
748 * struct _sas_port - wide/narrow sas port information
749 * @port_list: list of ports belonging to expander
750 * @num_phys: number of phys belonging to this port
751 * @remote_identify: attached device identification
752 * @rphy: sas transport rphy object
753 * @port: sas transport wide/narrow port object
754 * @hba_port: hba port entry containing port's port number info
755 * @phy_list: _sas_phy list objects belonging to this port
756 */
757 struct _sas_port {
758 struct list_head port_list;
759 u8 num_phys;
760 struct sas_identify remote_identify;
761 struct sas_rphy *rphy;
762 struct sas_port *port;
763 struct hba_port *hba_port;
764 struct list_head phy_list;
765 };
766
767 /**
768 * struct _sas_phy - phy information
769 * @port_siblings: list of phys belonging to a port
770 * @identify: phy identification
771 * @remote_identify: attached device identification
772 * @phy: sas transport phy object
773 * @phy_id: unique phy id
774 * @handle: device handle for this phy
775 * @attached_handle: device handle for attached device
776 * @phy_belongs_to_port: port has been created for this phy
777 * @port: hba port entry containing port number info
778 */
779 struct _sas_phy {
780 struct list_head port_siblings;
781 struct sas_identify identify;
782 struct sas_identify remote_identify;
783 struct sas_phy *phy;
784 u8 phy_id;
785 u16 handle;
786 u16 attached_handle;
787 u8 phy_belongs_to_port;
788 u8 hba_vphy;
789 struct hba_port *port;
790 };
791
792 /**
793 * struct _sas_node - sas_host/expander information
794 * @list: list of expanders
795 * @parent_dev: parent device class
796 * @num_phys: number phys belonging to this sas_host/expander
797 * @sas_address: sas address of this sas_host/expander
798 * @handle: handle for this sas_host/expander
799 * @sas_address_parent: sas address of parent expander or sas host
800 * @enclosure_handle: handle for this a member of an enclosure
801 * @device_info: bitwise defining capabilities of this sas_host/expander
802 * @responding: used in _scsih_expander_device_mark_responding
803 * @nr_phys_allocated: Allocated memory for this many count phys
804 * @phy: a list of phys that make up this sas_host/expander
805 * @sas_port_list: list of ports attached to this sas_host/expander
806 * @port: hba port entry containing node's port number info
807 * @rphy: sas_rphy object of this expander
808 */
809 struct _sas_node {
810 struct list_head list;
811 struct device *parent_dev;
812 u8 num_phys;
813 u64 sas_address;
814 u16 handle;
815 u64 sas_address_parent;
816 u16 enclosure_handle;
817 u64 enclosure_logical_id;
818 u8 responding;
819 u8 nr_phys_allocated;
820 struct hba_port *port;
821 struct _sas_phy *phy;
822 struct list_head sas_port_list;
823 struct sas_rphy *rphy;
824 };
825
826 /**
827 * struct _enclosure_node - enclosure information
828 * @list: list of enclosures
829 * @pg0: enclosure pg0;
830 */
831 struct _enclosure_node {
832 struct list_head list;
833 Mpi2SasEnclosurePage0_t pg0;
834 };
835
836 /**
837 * enum reset_type - reset state
838 * @FORCE_BIG_HAMMER: issue diagnostic reset
839 * @SOFT_RESET: issue message_unit_reset, if fails to to big hammer
840 */
841 enum reset_type {
842 FORCE_BIG_HAMMER,
843 SOFT_RESET,
844 };
845
846 /**
847 * struct pcie_sg_list - PCIe SGL buffer (contiguous per I/O)
848 * @pcie_sgl: PCIe native SGL for NVMe devices
849 * @pcie_sgl_dma: physical address
850 */
851 struct pcie_sg_list {
852 void *pcie_sgl;
853 dma_addr_t pcie_sgl_dma;
854 };
855
856 /**
857 * struct chain_tracker - firmware chain tracker
858 * @chain_buffer: chain buffer
859 * @chain_buffer_dma: physical address
860 * @tracker_list: list of free request (ioc->free_chain_list)
861 */
862 struct chain_tracker {
863 void *chain_buffer;
864 dma_addr_t chain_buffer_dma;
865 };
866
867 struct chain_lookup {
868 struct chain_tracker *chains_per_smid;
869 atomic_t chain_offset;
870 };
871
872 /**
873 * struct scsiio_tracker - scsi mf request tracker
874 * @smid: system message id
875 * @cb_idx: callback index
876 * @direct_io: To indicate whether I/O is direct (WARPDRIVE)
877 * @chain_list: list of associated firmware chain tracker
878 * @msix_io: IO's msix
879 */
880 struct scsiio_tracker {
881 u16 smid;
882 struct scsi_cmnd *scmd;
883 u8 cb_idx;
884 u8 direct_io;
885 struct pcie_sg_list pcie_sg_list;
886 struct list_head chain_list;
887 u16 msix_io;
888 };
889
890 /**
891 * struct request_tracker - firmware request tracker
892 * @smid: system message id
893 * @cb_idx: callback index
894 * @tracker_list: list of free request (ioc->free_list)
895 */
896 struct request_tracker {
897 u16 smid;
898 u8 cb_idx;
899 struct list_head tracker_list;
900 };
901
902 /**
903 * struct _tr_list - target reset list
904 * @handle: device handle
905 * @state: state machine
906 */
907 struct _tr_list {
908 struct list_head list;
909 u16 handle;
910 u16 state;
911 };
912
913 /**
914 * struct _sc_list - delayed SAS_IO_UNIT_CONTROL message list
915 * @handle: device handle
916 */
917 struct _sc_list {
918 struct list_head list;
919 u16 handle;
920 };
921
922 /**
923 * struct _event_ack_list - delayed event acknowledgment list
924 * @Event: Event ID
925 * @EventContext: used to track the event uniquely
926 */
927 struct _event_ack_list {
928 struct list_head list;
929 U16 Event;
930 U32 EventContext;
931 };
932
933 /**
934 * struct adapter_reply_queue - the reply queue struct
935 * @ioc: per adapter object
936 * @msix_index: msix index into vector table
937 * @vector: irq vector
938 * @reply_post_host_index: head index in the pool where FW completes IO
939 * @reply_post_free: reply post base virt address
940 * @name: the name registered to request_irq()
941 * @busy: isr is actively processing replies on another cpu
942 * @os_irq: irq number
943 * @irqpoll: irq_poll object
944 * @irq_poll_scheduled: Tells whether irq poll is scheduled or not
945 * @is_iouring_poll_q: Tells whether reply queues is assigned
946 * to io uring poll queues or not
947 * @list: this list
948 */
949 struct adapter_reply_queue {
950 struct MPT3SAS_ADAPTER *ioc;
951 u8 msix_index;
952 u32 reply_post_host_index;
953 Mpi2ReplyDescriptorsUnion_t *reply_post_free;
954 char name[MPT_NAME_LENGTH];
955 atomic_t busy;
956 u32 os_irq;
957 struct irq_poll irqpoll;
958 bool irq_poll_scheduled;
959 bool irq_line_enable;
960 bool is_iouring_poll_q;
961 struct list_head list;
962 };
963
964 /**
965 * struct io_uring_poll_queue - the io uring poll queue structure
966 * @busy: Tells whether io uring poll queue is busy or not
967 * @pause: Tells whether IOs are paused on io uring poll queue or not
968 * @reply_q: reply queue mapped for io uring poll queue
969 */
970 struct io_uring_poll_queue {
971 atomic_t busy;
972 atomic_t pause;
973 struct adapter_reply_queue *reply_q;
974 };
975
976 typedef void (*MPT_ADD_SGE)(void *paddr, u32 flags_length, dma_addr_t dma_addr);
977
978 /* SAS3.0 support */
979 typedef int (*MPT_BUILD_SG_SCMD)(struct MPT3SAS_ADAPTER *ioc,
980 struct scsi_cmnd *scmd, u16 smid, struct _pcie_device *pcie_device);
981 typedef void (*MPT_BUILD_SG)(struct MPT3SAS_ADAPTER *ioc, void *psge,
982 dma_addr_t data_out_dma, size_t data_out_sz,
983 dma_addr_t data_in_dma, size_t data_in_sz);
984 typedef void (*MPT_BUILD_ZERO_LEN_SGE)(struct MPT3SAS_ADAPTER *ioc,
985 void *paddr);
986
987 /* SAS3.5 support */
988 typedef void (*NVME_BUILD_PRP)(struct MPT3SAS_ADAPTER *ioc, u16 smid,
989 Mpi26NVMeEncapsulatedRequest_t *nvme_encap_request,
990 dma_addr_t data_out_dma, size_t data_out_sz, dma_addr_t data_in_dma,
991 size_t data_in_sz);
992
993 /* To support atomic and non atomic descriptors*/
994 typedef void (*PUT_SMID_IO_FP_HIP) (struct MPT3SAS_ADAPTER *ioc, u16 smid,
995 u16 funcdep);
996 typedef void (*PUT_SMID_DEFAULT) (struct MPT3SAS_ADAPTER *ioc, u16 smid);
997 typedef u32 (*BASE_READ_REG) (const void __iomem *addr);
998 /*
999 * To get high iops reply queue's msix index when high iops mode is enabled
1000 * else get the msix index of general reply queues.
1001 */
1002 typedef u8 (*GET_MSIX_INDEX) (struct MPT3SAS_ADAPTER *ioc,
1003 struct scsi_cmnd *scmd);
1004
1005 /* IOC Facts and Port Facts converted from little endian to cpu */
1006 union mpi3_version_union {
1007 MPI2_VERSION_STRUCT Struct;
1008 u32 Word;
1009 };
1010
1011 struct mpt3sas_facts {
1012 u16 MsgVersion;
1013 u16 HeaderVersion;
1014 u8 IOCNumber;
1015 u8 VP_ID;
1016 u8 VF_ID;
1017 u16 IOCExceptions;
1018 u16 IOCStatus;
1019 u32 IOCLogInfo;
1020 u8 MaxChainDepth;
1021 u8 WhoInit;
1022 u8 NumberOfPorts;
1023 u8 MaxMSIxVectors;
1024 u16 RequestCredit;
1025 u16 ProductID;
1026 u32 IOCCapabilities;
1027 union mpi3_version_union FWVersion;
1028 u16 IOCRequestFrameSize;
1029 u16 IOCMaxChainSegmentSize;
1030 u16 MaxInitiators;
1031 u16 MaxTargets;
1032 u16 MaxSasExpanders;
1033 u16 MaxEnclosures;
1034 u16 ProtocolFlags;
1035 u16 HighPriorityCredit;
1036 u16 MaxReplyDescriptorPostQueueDepth;
1037 u8 ReplyFrameSize;
1038 u8 MaxVolumes;
1039 u16 MaxDevHandle;
1040 u16 MaxPersistentEntries;
1041 u16 MinDevHandle;
1042 u8 CurrentHostPageSize;
1043 };
1044
1045 struct mpt3sas_port_facts {
1046 u8 PortNumber;
1047 u8 VP_ID;
1048 u8 VF_ID;
1049 u8 PortType;
1050 u16 MaxPostedCmdBuffers;
1051 };
1052
1053 struct reply_post_struct {
1054 Mpi2ReplyDescriptorsUnion_t *reply_post_free;
1055 dma_addr_t reply_post_free_dma;
1056 };
1057
1058 /**
1059 * struct virtual_phy - vSES phy structure
1060 * sas_address: SAS Address of vSES device
1061 * phy_mask: vSES device's phy number
1062 * flags: flags used to manage this structure
1063 */
1064 struct virtual_phy {
1065 struct list_head list;
1066 u64 sas_address;
1067 u32 phy_mask;
1068 u8 flags;
1069 };
1070
1071 #define MPT_VPHY_FLAG_DIRTY_PHY 0x01
1072
1073 /**
1074 * struct hba_port - Saves each HBA's Wide/Narrow port info
1075 * @sas_address: sas address of this wide/narrow port's attached device
1076 * @phy_mask: HBA PHY's belonging to this port
1077 * @port_id: port number
1078 * @flags: hba port flags
1079 * @vphys_mask : mask of vSES devices Phy number
1080 * @vphys_list : list containing vSES device structures
1081 */
1082 struct hba_port {
1083 struct list_head list;
1084 u64 sas_address;
1085 u32 phy_mask;
1086 u8 port_id;
1087 u8 flags;
1088 u32 vphys_mask;
1089 struct list_head vphys_list;
1090 };
1091
1092 /* hba port flags */
1093 #define HBA_PORT_FLAG_DIRTY_PORT 0x01
1094 #define HBA_PORT_FLAG_NEW_PORT 0x02
1095
1096 #define MULTIPATH_DISABLED_PORT_ID 0xFF
1097
1098 /**
1099 * struct htb_rel_query - diagnostic buffer release reason
1100 * @unique_id - unique id associated with this buffer.
1101 * @buffer_rel_condition - Release condition ioctl/sysfs/reset
1102 * @reserved
1103 * @trigger_type - Master/Event/scsi/MPI
1104 * @trigger_info_dwords - Data Correspondig to trigger type
1105 */
1106 struct htb_rel_query {
1107 u16 buffer_rel_condition;
1108 u16 reserved;
1109 u32 trigger_type;
1110 u32 trigger_info_dwords[2];
1111 };
1112
1113 /* Buffer_rel_condition bit fields */
1114
1115 /* Bit 0 - Diag Buffer not Released */
1116 #define MPT3_DIAG_BUFFER_NOT_RELEASED (0x00)
1117 /* Bit 0 - Diag Buffer Released */
1118 #define MPT3_DIAG_BUFFER_RELEASED (0x01)
1119
1120 /*
1121 * Bit 1 - Diag Buffer Released by IOCTL,
1122 * This bit is valid only if Bit 0 is one
1123 */
1124 #define MPT3_DIAG_BUFFER_REL_IOCTL (0x02 | MPT3_DIAG_BUFFER_RELEASED)
1125
1126 /*
1127 * Bit 2 - Diag Buffer Released by Trigger,
1128 * This bit is valid only if Bit 0 is one
1129 */
1130 #define MPT3_DIAG_BUFFER_REL_TRIGGER (0x04 | MPT3_DIAG_BUFFER_RELEASED)
1131
1132 /*
1133 * Bit 3 - Diag Buffer Released by SysFs,
1134 * This bit is valid only if Bit 0 is one
1135 */
1136 #define MPT3_DIAG_BUFFER_REL_SYSFS (0x08 | MPT3_DIAG_BUFFER_RELEASED)
1137
1138 /* DIAG RESET Master trigger flags */
1139 #define MPT_DIAG_RESET_ISSUED_BY_DRIVER 0x00000000
1140 #define MPT_DIAG_RESET_ISSUED_BY_USER 0x00000001
1141
1142 typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc);
1143 /**
1144 * struct MPT3SAS_ADAPTER - per adapter struct
1145 * @list: ioc_list
1146 * @shost: shost object
1147 * @id: unique adapter id
1148 * @cpu_count: number online cpus
1149 * @name: generic ioc string
1150 * @tmp_string: tmp string used for logging
1151 * @pdev: pci pdev object
1152 * @pio_chip: physical io register space
1153 * @chip: memory mapped register space
1154 * @chip_phys: physical addrss prior to mapping
1155 * @logging_level: see mpt3sas_debug.h
1156 * @fwfault_debug: debuging FW timeouts
1157 * @ir_firmware: IR firmware present
1158 * @bars: bitmask of BAR's that must be configured
1159 * @mask_interrupts: ignore interrupt
1160 * @pci_access_mutex: Mutex to synchronize ioctl, sysfs show path and
1161 * pci resource handling
1162 * @fault_reset_work_q_name: fw fault work queue
1163 * @fault_reset_work_q: ""
1164 * @fault_reset_work: ""
1165 * @firmware_event_name: fw event work queue
1166 * @firmware_event_thread: ""
1167 * @fw_event_lock:
1168 * @fw_event_list: list of fw events
1169 * @current_evet: current processing firmware event
1170 * @fw_event_cleanup: set to one while cleaning up the fw events
1171 * @aen_event_read_flag: event log was read
1172 * @broadcast_aen_busy: broadcast aen waiting to be serviced
1173 * @shost_recovery: host reset in progress
1174 * @ioc_reset_in_progress_lock:
1175 * @ioc_link_reset_in_progress: phy/hard reset in progress
1176 * @ignore_loginfos: ignore loginfos during task management
1177 * @remove_host: flag for when driver unloads, to avoid sending dev resets
1178 * @pci_error_recovery: flag to prevent ioc access until slot reset completes
1179 * @wait_for_discovery_to_complete: flag set at driver load time when
1180 * waiting on reporting devices
1181 * @is_driver_loading: flag set at driver load time
1182 * @port_enable_failed: flag set when port enable has failed
1183 * @start_scan: flag set from scan_start callback, cleared from _mpt3sas_fw_work
1184 * @start_scan_failed: means port enable failed, return's the ioc_status
1185 * @msix_enable: flag indicating msix is enabled
1186 * @msix_vector_count: number msix vectors
1187 * @cpu_msix_table: table for mapping cpus to msix index
1188 * @cpu_msix_table_sz: table size
1189 * @total_io_cnt: Gives total IO count, used to load balance the interrupts
1190 * @ioc_coredump_loop: will have non-zero value when FW is in CoreDump state
1191 * @timestamp_update_count: Counter to fire timeSync command
1192 * time_sync_interval: Time sync interval read from man page 11
1193 * @high_iops_outstanding: used to load balance the interrupts
1194 * within high iops reply queues
1195 * @msix_load_balance: Enables load balancing of interrupts across
1196 * the multiple MSIXs
1197 * @schedule_dead_ioc_flush_running_cmds: callback to flush pending commands
1198 * @thresh_hold: Max number of reply descriptors processed
1199 * before updating Host Index
1200 * @iopoll_q_start_index: starting index of io uring poll queues
1201 * in reply queue list
1202 * @drv_internal_flags: Bit map internal to driver
1203 * @drv_support_bitmap: driver's supported feature bit map
1204 * @use_32bit_dma: Flag to use 32 bit consistent dma mask
1205 * @scsi_io_cb_idx: shost generated commands
1206 * @tm_cb_idx: task management commands
1207 * @scsih_cb_idx: scsih internal commands
1208 * @transport_cb_idx: transport internal commands
1209 * @ctl_cb_idx: clt internal commands
1210 * @base_cb_idx: base internal commands
1211 * @config_cb_idx: base internal commands
1212 * @tm_tr_cb_idx : device removal target reset handshake
1213 * @tm_tr_volume_cb_idx : volume removal target reset
1214 * @base_cmds:
1215 * @transport_cmds:
1216 * @scsih_cmds:
1217 * @tm_cmds:
1218 * @ctl_cmds:
1219 * @config_cmds:
1220 * @base_add_sg_single: handler for either 32/64 bit sgl's
1221 * @event_type: bits indicating which events to log
1222 * @event_context: unique id for each logged event
1223 * @event_log: event log pointer
1224 * @event_masks: events that are masked
1225 * @max_shutdown_latency: timeout value for NVMe shutdown operation,
1226 * which is equal that NVMe drive's RTD3 Entry Latency
1227 * which has reported maximum RTD3 Entry Latency value
1228 * among attached NVMe drives.
1229 * @facts: static facts data
1230 * @prev_fw_facts: previous fw facts data
1231 * @pfacts: static port facts data
1232 * @manu_pg0: static manufacturing page 0
1233 * @manu_pg10: static manufacturing page 10
1234 * @manu_pg11: static manufacturing page 11
1235 * @bios_pg2: static bios page 2
1236 * @bios_pg3: static bios page 3
1237 * @ioc_pg8: static ioc page 8
1238 * @iounit_pg0: static iounit page 0
1239 * @iounit_pg1: static iounit page 1
1240 * @iounit_pg8: static iounit page 8
1241 * @sas_hba: sas host object
1242 * @sas_expander_list: expander object list
1243 * @enclosure_list: enclosure object list
1244 * @sas_node_lock:
1245 * @sas_device_list: sas device object list
1246 * @sas_device_init_list: sas device object list (used only at init time)
1247 * @sas_device_lock:
1248 * @pcie_device_list: pcie device object list
1249 * @pcie_device_init_list: pcie device object list (used only at init time)
1250 * @pcie_device_lock:
1251 * @io_missing_delay: time for IO completed by fw when PDR enabled
1252 * @device_missing_delay: time for device missing by fw when PDR enabled
1253 * @sas_id : used for setting volume target IDs
1254 * @pcie_target_id: used for setting pcie target IDs
1255 * @blocking_handles: bitmask used to identify which devices need blocking
1256 * @pd_handles : bitmask for PD handles
1257 * @pd_handles_sz : size of pd_handle bitmask
1258 * @config_page_sz: config page size
1259 * @config_page: reserve memory for config page payload
1260 * @config_page_dma:
1261 * @hba_queue_depth: hba request queue depth
1262 * @sge_size: sg element size for either 32/64 bit
1263 * @scsiio_depth: SCSI_IO queue depth
1264 * @request_sz: per request frame size
1265 * @request: pool of request frames
1266 * @request_dma:
1267 * @request_dma_sz:
1268 * @scsi_lookup: firmware request tracker list
1269 * @scsi_lookup_lock:
1270 * @free_list: free list of request
1271 * @pending_io_count:
1272 * @reset_wq:
1273 * @chain: pool of chains
1274 * @chain_dma:
1275 * @max_sges_in_main_message: number sg elements in main message
1276 * @max_sges_in_chain_message: number sg elements per chain
1277 * @chains_needed_per_io: max chains per io
1278 * @chain_depth: total chains allocated
1279 * @chain_segment_sz: gives the max number of
1280 * SGEs accommodate on single chain buffer
1281 * @hi_priority_smid:
1282 * @hi_priority:
1283 * @hi_priority_dma:
1284 * @hi_priority_depth:
1285 * @hpr_lookup:
1286 * @hpr_free_list:
1287 * @internal_smid:
1288 * @internal:
1289 * @internal_dma:
1290 * @internal_depth:
1291 * @internal_lookup:
1292 * @internal_free_list:
1293 * @sense: pool of sense
1294 * @sense_dma:
1295 * @sense_dma_pool:
1296 * @reply_depth: hba reply queue depth:
1297 * @reply_sz: per reply frame size:
1298 * @reply: pool of replys:
1299 * @reply_dma:
1300 * @reply_dma_pool:
1301 * @reply_free_queue_depth: reply free depth
1302 * @reply_free: pool for reply free queue (32 bit addr)
1303 * @reply_free_dma:
1304 * @reply_free_dma_pool:
1305 * @reply_free_host_index: tail index in pool to insert free replys
1306 * @reply_post_queue_depth: reply post queue depth
1307 * @reply_post_struct: struct for reply_post_free physical & virt address
1308 * @rdpq_array_capable: FW supports multiple reply queue addresses in ioc_init
1309 * @rdpq_array_enable: rdpq_array support is enabled in the driver
1310 * @rdpq_array_enable_assigned: this ensures that rdpq_array_enable flag
1311 * is assigned only ones
1312 * @reply_queue_count: number of reply queue's
1313 * @reply_queue_list: link list contaning the reply queue info
1314 * @msix96_vector: 96 MSI-X vector support
1315 * @replyPostRegisterIndex: index of next position in Reply Desc Post Queue
1316 * @delayed_tr_list: target reset link list
1317 * @delayed_tr_volume_list: volume target reset link list
1318 * @delayed_sc_list:
1319 * @delayed_event_ack_list:
1320 * @temp_sensors_count: flag to carry the number of temperature sensors
1321 * @pci_access_mutex: Mutex to synchronize ioctl,sysfs show path and
1322 * pci resource handling. PCI resource freeing will lead to free
1323 * vital hardware/memory resource, which might be in use by cli/sysfs
1324 * path functions resulting in Null pointer reference followed by kernel
1325 * crash. To avoid the above race condition we use mutex syncrhonization
1326 * which ensures the syncrhonization between cli/sysfs_show path.
1327 * @atomic_desc_capable: Atomic Request Descriptor support.
1328 * @GET_MSIX_INDEX: Get the msix index of high iops queues.
1329 * @multipath_on_hba: flag to determine multipath on hba is enabled or not
1330 * @port_table_list: list containing HBA's wide/narrow port's info
1331 */
1332 struct MPT3SAS_ADAPTER {
1333 struct list_head list;
1334 struct Scsi_Host *shost;
1335 u8 id;
1336 int cpu_count;
1337 char name[MPT_NAME_LENGTH];
1338 char driver_name[MPT_NAME_LENGTH - 8];
1339 char tmp_string[MPT_STRING_LENGTH];
1340 struct pci_dev *pdev;
1341 Mpi2SystemInterfaceRegs_t __iomem *chip;
1342 phys_addr_t chip_phys;
1343 int logging_level;
1344 int fwfault_debug;
1345 u8 ir_firmware;
1346 int bars;
1347 u8 mask_interrupts;
1348
1349 /* fw fault handler */
1350 char fault_reset_work_q_name[20];
1351 struct workqueue_struct *fault_reset_work_q;
1352 struct delayed_work fault_reset_work;
1353
1354 /* fw event handler */
1355 char firmware_event_name[20];
1356 struct workqueue_struct *firmware_event_thread;
1357 spinlock_t fw_event_lock;
1358 struct list_head fw_event_list;
1359 struct fw_event_work *current_event;
1360 u8 fw_events_cleanup;
1361
1362 /* misc flags */
1363 int aen_event_read_flag;
1364 u8 broadcast_aen_busy;
1365 u16 broadcast_aen_pending;
1366 u8 shost_recovery;
1367 u8 got_task_abort_from_ioctl;
1368
1369 struct mutex reset_in_progress_mutex;
1370 spinlock_t ioc_reset_in_progress_lock;
1371 u8 ioc_link_reset_in_progress;
1372
1373 u8 ignore_loginfos;
1374 u8 remove_host;
1375 u8 pci_error_recovery;
1376 u8 wait_for_discovery_to_complete;
1377 u8 is_driver_loading;
1378 u8 port_enable_failed;
1379 u8 start_scan;
1380 u16 start_scan_failed;
1381
1382 u8 msix_enable;
1383 u16 msix_vector_count;
1384 u8 *cpu_msix_table;
1385 u16 cpu_msix_table_sz;
1386 resource_size_t __iomem **reply_post_host_index;
1387 u32 ioc_reset_count;
1388 MPT3SAS_FLUSH_RUNNING_CMDS schedule_dead_ioc_flush_running_cmds;
1389 u32 non_operational_loop;
1390 u8 ioc_coredump_loop;
1391 u32 timestamp_update_count;
1392 u32 time_sync_interval;
1393 atomic64_t total_io_cnt;
1394 atomic64_t high_iops_outstanding;
1395 bool msix_load_balance;
1396 u16 thresh_hold;
1397 u8 high_iops_queues;
1398 u8 iopoll_q_start_index;
1399 u32 drv_internal_flags;
1400 u32 drv_support_bitmap;
1401 u32 dma_mask;
1402 bool enable_sdev_max_qd;
1403 bool use_32bit_dma;
1404 struct io_uring_poll_queue *io_uring_poll_queues;
1405
1406 /* internal commands, callback index */
1407 u8 scsi_io_cb_idx;
1408 u8 tm_cb_idx;
1409 u8 transport_cb_idx;
1410 u8 scsih_cb_idx;
1411 u8 ctl_cb_idx;
1412 u8 base_cb_idx;
1413 u8 port_enable_cb_idx;
1414 u8 config_cb_idx;
1415 u8 tm_tr_cb_idx;
1416 u8 tm_tr_volume_cb_idx;
1417 u8 tm_sas_control_cb_idx;
1418 struct _internal_cmd base_cmds;
1419 struct _internal_cmd port_enable_cmds;
1420 struct _internal_cmd transport_cmds;
1421 struct _internal_cmd scsih_cmds;
1422 struct _internal_cmd tm_cmds;
1423 struct _internal_cmd ctl_cmds;
1424 struct _internal_cmd config_cmds;
1425
1426 MPT_ADD_SGE base_add_sg_single;
1427
1428 /* function ptr for either IEEE or MPI sg elements */
1429 MPT_BUILD_SG_SCMD build_sg_scmd;
1430 MPT_BUILD_SG build_sg;
1431 MPT_BUILD_ZERO_LEN_SGE build_zero_len_sge;
1432 u16 sge_size_ieee;
1433 u16 hba_mpi_version_belonged;
1434
1435 /* function ptr for MPI sg elements only */
1436 MPT_BUILD_SG build_sg_mpi;
1437 MPT_BUILD_ZERO_LEN_SGE build_zero_len_sge_mpi;
1438
1439 /* function ptr for NVMe PRP elements only */
1440 NVME_BUILD_PRP build_nvme_prp;
1441
1442 /* event log */
1443 u32 event_type[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];
1444 u32 event_context;
1445 void *event_log;
1446 u32 event_masks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];
1447
1448 u8 tm_custom_handling;
1449 u8 nvme_abort_timeout;
1450 u16 max_shutdown_latency;
1451 u16 max_wideport_qd;
1452 u16 max_narrowport_qd;
1453 u16 max_nvme_qd;
1454 u8 max_sata_qd;
1455
1456 /* static config pages */
1457 struct mpt3sas_facts facts;
1458 struct mpt3sas_facts prev_fw_facts;
1459 struct mpt3sas_port_facts *pfacts;
1460 Mpi2ManufacturingPage0_t manu_pg0;
1461 struct Mpi2ManufacturingPage10_t manu_pg10;
1462 struct Mpi2ManufacturingPage11_t manu_pg11;
1463 Mpi2BiosPage2_t bios_pg2;
1464 Mpi2BiosPage3_t bios_pg3;
1465 Mpi2IOCPage8_t ioc_pg8;
1466 Mpi2IOUnitPage0_t iounit_pg0;
1467 Mpi2IOUnitPage1_t iounit_pg1;
1468 Mpi2IOUnitPage8_t iounit_pg8;
1469 Mpi2IOCPage1_t ioc_pg1_copy;
1470
1471 struct _boot_device req_boot_device;
1472 struct _boot_device req_alt_boot_device;
1473 struct _boot_device current_boot_device;
1474
1475 /* sas hba, expander, and device list */
1476 struct _sas_node sas_hba;
1477 struct list_head sas_expander_list;
1478 struct list_head enclosure_list;
1479 spinlock_t sas_node_lock;
1480 struct list_head sas_device_list;
1481 struct list_head sas_device_init_list;
1482 spinlock_t sas_device_lock;
1483 struct list_head pcie_device_list;
1484 struct list_head pcie_device_init_list;
1485 spinlock_t pcie_device_lock;
1486
1487 struct list_head raid_device_list;
1488 spinlock_t raid_device_lock;
1489 u8 io_missing_delay;
1490 u16 device_missing_delay;
1491 int sas_id;
1492 int pcie_target_id;
1493
1494 void *blocking_handles;
1495 void *pd_handles;
1496 u16 pd_handles_sz;
1497
1498 void *pend_os_device_add;
1499 u16 pend_os_device_add_sz;
1500
1501 /* config page */
1502 u16 config_page_sz;
1503 void *config_page;
1504 dma_addr_t config_page_dma;
1505 void *config_vaddr;
1506
1507 /* scsiio request */
1508 u16 hba_queue_depth;
1509 u16 sge_size;
1510 u16 scsiio_depth;
1511 u16 request_sz;
1512 u8 *request;
1513 dma_addr_t request_dma;
1514 u32 request_dma_sz;
1515 struct pcie_sg_list *pcie_sg_lookup;
1516 spinlock_t scsi_lookup_lock;
1517 int pending_io_count;
1518 wait_queue_head_t reset_wq;
1519 u16 *io_queue_num;
1520
1521 /* PCIe SGL */
1522 struct dma_pool *pcie_sgl_dma_pool;
1523 /* Host Page Size */
1524 u32 page_size;
1525
1526 /* chain */
1527 struct chain_lookup *chain_lookup;
1528 struct list_head free_chain_list;
1529 struct dma_pool *chain_dma_pool;
1530 ulong chain_pages;
1531 u16 max_sges_in_main_message;
1532 u16 max_sges_in_chain_message;
1533 u16 chains_needed_per_io;
1534 u32 chain_depth;
1535 u16 chain_segment_sz;
1536 u16 chains_per_prp_buffer;
1537
1538 /* hi-priority queue */
1539 u16 hi_priority_smid;
1540 u8 *hi_priority;
1541 dma_addr_t hi_priority_dma;
1542 u16 hi_priority_depth;
1543 struct request_tracker *hpr_lookup;
1544 struct list_head hpr_free_list;
1545
1546 /* internal queue */
1547 u16 internal_smid;
1548 u8 *internal;
1549 dma_addr_t internal_dma;
1550 u16 internal_depth;
1551 struct request_tracker *internal_lookup;
1552 struct list_head internal_free_list;
1553
1554 /* sense */
1555 u8 *sense;
1556 dma_addr_t sense_dma;
1557 struct dma_pool *sense_dma_pool;
1558
1559 /* reply */
1560 u16 reply_sz;
1561 u8 *reply;
1562 dma_addr_t reply_dma;
1563 u32 reply_dma_max_address;
1564 u32 reply_dma_min_address;
1565 struct dma_pool *reply_dma_pool;
1566
1567 /* reply free queue */
1568 u16 reply_free_queue_depth;
1569 __le32 *reply_free;
1570 dma_addr_t reply_free_dma;
1571 struct dma_pool *reply_free_dma_pool;
1572 u32 reply_free_host_index;
1573
1574 /* reply post queue */
1575 u16 reply_post_queue_depth;
1576 struct reply_post_struct *reply_post;
1577 u8 rdpq_array_capable;
1578 u8 rdpq_array_enable;
1579 u8 rdpq_array_enable_assigned;
1580 struct dma_pool *reply_post_free_dma_pool;
1581 struct dma_pool *reply_post_free_array_dma_pool;
1582 Mpi2IOCInitRDPQArrayEntry *reply_post_free_array;
1583 dma_addr_t reply_post_free_array_dma;
1584 u8 reply_queue_count;
1585 struct list_head reply_queue_list;
1586
1587 u8 combined_reply_queue;
1588 u8 combined_reply_index_count;
1589 u8 smp_affinity_enable;
1590 /* reply post register index */
1591 resource_size_t __iomem **replyPostRegisterIndex;
1592
1593 struct list_head delayed_tr_list;
1594 struct list_head delayed_tr_volume_list;
1595 struct list_head delayed_sc_list;
1596 struct list_head delayed_event_ack_list;
1597 u8 temp_sensors_count;
1598 struct mutex pci_access_mutex;
1599
1600 /* diag buffer support */
1601 u8 *diag_buffer[MPI2_DIAG_BUF_TYPE_COUNT];
1602 u32 diag_buffer_sz[MPI2_DIAG_BUF_TYPE_COUNT];
1603 dma_addr_t diag_buffer_dma[MPI2_DIAG_BUF_TYPE_COUNT];
1604 u8 diag_buffer_status[MPI2_DIAG_BUF_TYPE_COUNT];
1605 u32 unique_id[MPI2_DIAG_BUF_TYPE_COUNT];
1606 u32 product_specific[MPI2_DIAG_BUF_TYPE_COUNT][23];
1607 u32 diagnostic_flags[MPI2_DIAG_BUF_TYPE_COUNT];
1608 u32 ring_buffer_offset;
1609 u32 ring_buffer_sz;
1610 struct htb_rel_query htb_rel;
1611 u8 reset_from_user;
1612 u8 is_warpdrive;
1613 u8 is_mcpu_endpoint;
1614 u8 hide_ir_msg;
1615 u8 mfg_pg10_hide_flag;
1616 u8 hide_drives;
1617 spinlock_t diag_trigger_lock;
1618 u8 diag_trigger_active;
1619 u8 atomic_desc_capable;
1620 BASE_READ_REG base_readl;
1621 BASE_READ_REG base_readl_ext_retry;
1622 struct SL_WH_MASTER_TRIGGER_T diag_trigger_master;
1623 struct SL_WH_EVENT_TRIGGERS_T diag_trigger_event;
1624 struct SL_WH_SCSI_TRIGGERS_T diag_trigger_scsi;
1625 struct SL_WH_MPI_TRIGGERS_T diag_trigger_mpi;
1626 u8 supports_trigger_pages;
1627 void *device_remove_in_progress;
1628 u16 device_remove_in_progress_sz;
1629 u8 is_gen35_ioc;
1630 u8 is_aero_ioc;
1631 struct dentry *debugfs_root;
1632 struct dentry *ioc_dump;
1633 PUT_SMID_IO_FP_HIP put_smid_scsi_io;
1634 PUT_SMID_IO_FP_HIP put_smid_fast_path;
1635 PUT_SMID_IO_FP_HIP put_smid_hi_priority;
1636 PUT_SMID_DEFAULT put_smid_default;
1637 GET_MSIX_INDEX get_msix_index_for_smlio;
1638
1639 u8 multipath_on_hba;
1640 struct list_head port_table_list;
1641 };
1642
1643 struct mpt3sas_debugfs_buffer {
1644 void *buf;
1645 u32 len;
1646 };
1647
1648 #define MPT_DRV_SUPPORT_BITMAP_MEMMOVE 0x00000001
1649 #define MPT_DRV_SUPPORT_BITMAP_ADDNLQUERY 0x00000002
1650
1651 #define MPT_DRV_INTERNAL_FIRST_PE_ISSUED 0x00000001
1652
1653 typedef u8 (*MPT_CALLBACK)(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
1654 u32 reply);
1655
1656 /*
1657 * struct ATTO_SAS_NVRAM - ATTO NVRAM settings stored
1658 * in Manufacturing page 1 used to get
1659 * ATTO SasAddr.
1660 */
1661 struct ATTO_SAS_NVRAM {
1662 u8 Signature[4];
1663 u8 Version;
1664 #define ATTO_SASNVR_VERSION 0
1665
1666 u8 Checksum;
1667 #define ATTO_SASNVR_CKSUM_SEED 0x5A
1668 u8 Pad[10];
1669 u8 SasAddr[8];
1670 #define ATTO_SAS_ADDR_ALIGN 64
1671 u8 Reserved[232];
1672 };
1673
1674 #define ATTO_SAS_ADDR_DEVNAME_BIAS 63
1675
1676 union ATTO_SAS_ADDRESS {
1677 U8 b[8];
1678 U16 w[4];
1679 U32 d[2];
1680 U64 q;
1681 };
1682
1683 /* base shared API */
1684 extern struct list_head mpt3sas_ioc_list;
1685 extern char driver_name[MPT_NAME_LENGTH];
1686 /* spinlock on list operations over IOCs
1687 * Case: when multiple warpdrive cards(IOCs) are in use
1688 * Each IOC will added to the ioc list structure on initialization.
1689 * Watchdog threads run at regular intervals to check IOC for any
1690 * fault conditions which will trigger the dead_ioc thread to
1691 * deallocate pci resource, resulting deleting the IOC netry from list,
1692 * this deletion need to protected by spinlock to enusre that
1693 * ioc removal is syncrhonized, if not synchronized it might lead to
1694 * list_del corruption as the ioc list is traversed in cli path.
1695 */
1696 extern spinlock_t gioc_lock;
1697
1698 void mpt3sas_base_start_watchdog(struct MPT3SAS_ADAPTER *ioc);
1699 void mpt3sas_base_stop_watchdog(struct MPT3SAS_ADAPTER *ioc);
1700
1701 int mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc);
1702 void mpt3sas_base_detach(struct MPT3SAS_ADAPTER *ioc);
1703 int mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc);
1704 void mpt3sas_base_free_resources(struct MPT3SAS_ADAPTER *ioc);
1705 void mpt3sas_free_enclosure_list(struct MPT3SAS_ADAPTER *ioc);
1706 int mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc,
1707 enum reset_type type);
1708
1709 void *mpt3sas_base_get_msg_frame(struct MPT3SAS_ADAPTER *ioc, u16 smid);
1710 void *mpt3sas_base_get_sense_buffer(struct MPT3SAS_ADAPTER *ioc, u16 smid);
1711 __le32 mpt3sas_base_get_sense_buffer_dma(struct MPT3SAS_ADAPTER *ioc,
1712 u16 smid);
1713 void *mpt3sas_base_get_pcie_sgl(struct MPT3SAS_ADAPTER *ioc, u16 smid);
1714 dma_addr_t mpt3sas_base_get_pcie_sgl_dma(struct MPT3SAS_ADAPTER *ioc, u16 smid);
1715 void mpt3sas_base_sync_reply_irqs(struct MPT3SAS_ADAPTER *ioc, u8 poll);
1716 void mpt3sas_base_mask_interrupts(struct MPT3SAS_ADAPTER *ioc);
1717 void mpt3sas_base_unmask_interrupts(struct MPT3SAS_ADAPTER *ioc);
1718
1719 void mpt3sas_base_put_smid_fast_path(struct MPT3SAS_ADAPTER *ioc, u16 smid,
1720 u16 handle);
1721 void mpt3sas_base_put_smid_hi_priority(struct MPT3SAS_ADAPTER *ioc, u16 smid,
1722 u16 msix_task);
1723 void mpt3sas_base_put_smid_nvme_encap(struct MPT3SAS_ADAPTER *ioc, u16 smid);
1724 void mpt3sas_base_put_smid_default(struct MPT3SAS_ADAPTER *ioc, u16 smid);
1725 /* hi-priority queue */
1726 u16 mpt3sas_base_get_smid_hpr(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx);
1727 u16 mpt3sas_base_get_smid_scsiio(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx,
1728 struct scsi_cmnd *scmd);
1729 void mpt3sas_base_clear_st(struct MPT3SAS_ADAPTER *ioc,
1730 struct scsiio_tracker *st);
1731
1732 u16 mpt3sas_base_get_smid(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx);
1733 void mpt3sas_base_free_smid(struct MPT3SAS_ADAPTER *ioc, u16 smid);
1734 void mpt3sas_base_initialize_callback_handler(void);
1735 u8 mpt3sas_base_register_callback_handler(MPT_CALLBACK cb_func);
1736 void mpt3sas_base_release_callback_handler(u8 cb_idx);
1737
1738 u8 mpt3sas_base_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
1739 u32 reply);
1740 u8 mpt3sas_port_enable_done(struct MPT3SAS_ADAPTER *ioc, u16 smid,
1741 u8 msix_index, u32 reply);
1742 void *mpt3sas_base_get_reply_virt_addr(struct MPT3SAS_ADAPTER *ioc,
1743 u32 phys_addr);
1744
1745 u32 mpt3sas_base_get_iocstate(struct MPT3SAS_ADAPTER *ioc, int cooked);
1746
1747 void mpt3sas_base_fault_info(struct MPT3SAS_ADAPTER *ioc , u16 fault_code);
1748 #define mpt3sas_print_fault_code(ioc, fault_code) \
1749 do { pr_err("%s fault info from func: %s\n", ioc->name, __func__); \
1750 mpt3sas_base_fault_info(ioc, fault_code); } while (0)
1751
1752 void mpt3sas_base_coredump_info(struct MPT3SAS_ADAPTER *ioc, u16 fault_code);
1753 #define mpt3sas_print_coredump_info(ioc, fault_code) \
1754 do { pr_err("%s fault info from func: %s\n", ioc->name, __func__); \
1755 mpt3sas_base_coredump_info(ioc, fault_code); } while (0)
1756
1757 int mpt3sas_base_wait_for_coredump_completion(struct MPT3SAS_ADAPTER *ioc,
1758 const char *caller);
1759 int mpt3sas_base_sas_iounit_control(struct MPT3SAS_ADAPTER *ioc,
1760 Mpi2SasIoUnitControlReply_t *mpi_reply,
1761 Mpi2SasIoUnitControlRequest_t *mpi_request);
1762 int mpt3sas_base_scsi_enclosure_processor(struct MPT3SAS_ADAPTER *ioc,
1763 Mpi2SepReply_t *mpi_reply, Mpi2SepRequest_t *mpi_request);
1764
1765 void mpt3sas_base_validate_event_type(struct MPT3SAS_ADAPTER *ioc,
1766 u32 *event_type);
1767
1768 void mpt3sas_halt_firmware(struct MPT3SAS_ADAPTER *ioc);
1769
1770 void mpt3sas_base_update_missing_delay(struct MPT3SAS_ADAPTER *ioc,
1771 u16 device_missing_delay, u8 io_missing_delay);
1772
1773 int mpt3sas_base_check_for_fault_and_issue_reset(
1774 struct MPT3SAS_ADAPTER *ioc);
1775
1776 int mpt3sas_port_enable(struct MPT3SAS_ADAPTER *ioc);
1777
1778 void
1779 mpt3sas_wait_for_commands_to_complete(struct MPT3SAS_ADAPTER *ioc);
1780
1781 u8 mpt3sas_base_check_cmd_timeout(struct MPT3SAS_ADAPTER *ioc,
1782 u8 status, void *mpi_request, int sz);
1783 #define mpt3sas_check_cmd_timeout(ioc, status, mpi_request, sz, issue_reset) \
1784 do { ioc_err(ioc, "In func: %s\n", __func__); \
1785 issue_reset = mpt3sas_base_check_cmd_timeout(ioc, \
1786 status, mpi_request, sz); } while (0)
1787
1788 int mpt3sas_wait_for_ioc(struct MPT3SAS_ADAPTER *ioc, int wait_count);
1789 int mpt3sas_base_make_ioc_ready(struct MPT3SAS_ADAPTER *ioc, enum reset_type type);
1790 void mpt3sas_base_free_irq(struct MPT3SAS_ADAPTER *ioc);
1791 void mpt3sas_base_disable_msix(struct MPT3SAS_ADAPTER *ioc);
1792 int mpt3sas_blk_mq_poll(struct Scsi_Host *shost, unsigned int queue_num);
1793 void mpt3sas_base_pause_mq_polling(struct MPT3SAS_ADAPTER *ioc);
1794 void mpt3sas_base_resume_mq_polling(struct MPT3SAS_ADAPTER *ioc);
1795
1796 /* scsih shared API */
1797 struct scsi_cmnd *mpt3sas_scsih_scsi_lookup_get(struct MPT3SAS_ADAPTER *ioc,
1798 u16 smid);
1799 u8 mpt3sas_scsih_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index,
1800 u32 reply);
1801 void mpt3sas_scsih_pre_reset_handler(struct MPT3SAS_ADAPTER *ioc);
1802 void mpt3sas_scsih_clear_outstanding_scsi_tm_commands(
1803 struct MPT3SAS_ADAPTER *ioc);
1804 void mpt3sas_scsih_reset_done_handler(struct MPT3SAS_ADAPTER *ioc);
1805
1806 int mpt3sas_scsih_issue_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle,
1807 uint channel, uint id, u64 lun, u8 type, u16 smid_task,
1808 u16 msix_task, u8 timeout, u8 tr_method);
1809 int mpt3sas_scsih_issue_locked_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle,
1810 uint channel, uint id, u64 lun, u8 type, u16 smid_task,
1811 u16 msix_task, u8 timeout, u8 tr_method);
1812
1813 void mpt3sas_scsih_set_tm_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle);
1814 void mpt3sas_scsih_clear_tm_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle);
1815 void mpt3sas_expander_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
1816 struct hba_port *port);
1817 void mpt3sas_device_remove_by_sas_address(struct MPT3SAS_ADAPTER *ioc,
1818 u64 sas_address, struct hba_port *port);
1819 u8 mpt3sas_check_for_pending_internal_cmds(struct MPT3SAS_ADAPTER *ioc,
1820 u16 smid);
1821 struct hba_port *
1822 mpt3sas_get_port_by_id(struct MPT3SAS_ADAPTER *ioc, u8 port,
1823 u8 bypass_dirty_port_flag);
1824
1825 struct _sas_node *mpt3sas_scsih_expander_find_by_handle(
1826 struct MPT3SAS_ADAPTER *ioc, u16 handle);
1827 struct _sas_node *mpt3sas_scsih_expander_find_by_sas_address(
1828 struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
1829 struct hba_port *port);
1830 struct _sas_device *mpt3sas_get_sdev_by_addr(
1831 struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
1832 struct hba_port *port);
1833 struct _sas_device *__mpt3sas_get_sdev_by_addr(
1834 struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
1835 struct hba_port *port);
1836 struct _sas_device *mpt3sas_get_sdev_by_handle(struct MPT3SAS_ADAPTER *ioc,
1837 u16 handle);
1838 struct _pcie_device *mpt3sas_get_pdev_by_handle(struct MPT3SAS_ADAPTER *ioc,
1839 u16 handle);
1840
1841 void mpt3sas_port_enable_complete(struct MPT3SAS_ADAPTER *ioc);
1842 struct _raid_device *
1843 mpt3sas_raid_device_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle);
1844 void mpt3sas_scsih_change_queue_depth(struct scsi_device *sdev, int qdepth);
1845 struct _sas_device *
1846 __mpt3sas_get_sdev_by_rphy(struct MPT3SAS_ADAPTER *ioc, struct sas_rphy *rphy);
1847 struct virtual_phy *
1848 mpt3sas_get_vphy_by_phy(struct MPT3SAS_ADAPTER *ioc,
1849 struct hba_port *port, u32 phy);
1850
1851 /* config shared API */
1852 u8 mpt3sas_config_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
1853 u32 reply);
1854 int mpt3sas_config_get_number_hba_phys(struct MPT3SAS_ADAPTER *ioc,
1855 u8 *num_phys);
1856 int mpt3sas_config_get_manufacturing_pg0(struct MPT3SAS_ADAPTER *ioc,
1857 Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage0_t *config_page);
1858 int mpt3sas_config_get_manufacturing_pg1(struct MPT3SAS_ADAPTER *ioc,
1859 Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage1_t *config_page);
1860
1861 int mpt3sas_config_get_manufacturing_pg7(struct MPT3SAS_ADAPTER *ioc,
1862 Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage7_t *config_page,
1863 u16 sz);
1864 int mpt3sas_config_get_manufacturing_pg10(struct MPT3SAS_ADAPTER *ioc,
1865 Mpi2ConfigReply_t *mpi_reply,
1866 struct Mpi2ManufacturingPage10_t *config_page);
1867
1868 int mpt3sas_config_get_manufacturing_pg11(struct MPT3SAS_ADAPTER *ioc,
1869 Mpi2ConfigReply_t *mpi_reply,
1870 struct Mpi2ManufacturingPage11_t *config_page);
1871 int mpt3sas_config_set_manufacturing_pg11(struct MPT3SAS_ADAPTER *ioc,
1872 Mpi2ConfigReply_t *mpi_reply,
1873 struct Mpi2ManufacturingPage11_t *config_page);
1874
1875 int mpt3sas_config_get_bios_pg2(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
1876 *mpi_reply, Mpi2BiosPage2_t *config_page);
1877 int mpt3sas_config_get_bios_pg3(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
1878 *mpi_reply, Mpi2BiosPage3_t *config_page);
1879 int mpt3sas_config_set_bios_pg4(struct MPT3SAS_ADAPTER *ioc,
1880 Mpi2ConfigReply_t *mpi_reply, Mpi2BiosPage4_t *config_page,
1881 int sz_config_page);
1882 int mpt3sas_config_get_bios_pg4(struct MPT3SAS_ADAPTER *ioc,
1883 Mpi2ConfigReply_t *mpi_reply, Mpi2BiosPage4_t *config_page,
1884 int sz_config_page);
1885 int mpt3sas_config_get_iounit_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
1886 *mpi_reply, Mpi2IOUnitPage0_t *config_page);
1887 int mpt3sas_config_get_sas_device_pg0(struct MPT3SAS_ADAPTER *ioc,
1888 Mpi2ConfigReply_t *mpi_reply, Mpi2SasDevicePage0_t *config_page,
1889 u32 form, u32 handle);
1890 int mpt3sas_config_get_sas_device_pg1(struct MPT3SAS_ADAPTER *ioc,
1891 Mpi2ConfigReply_t *mpi_reply, Mpi2SasDevicePage1_t *config_page,
1892 u32 form, u32 handle);
1893 int mpt3sas_config_get_pcie_device_pg0(struct MPT3SAS_ADAPTER *ioc,
1894 Mpi2ConfigReply_t *mpi_reply, Mpi26PCIeDevicePage0_t *config_page,
1895 u32 form, u32 handle);
1896 int mpt3sas_config_get_pcie_device_pg2(struct MPT3SAS_ADAPTER *ioc,
1897 Mpi2ConfigReply_t *mpi_reply, Mpi26PCIeDevicePage2_t *config_page,
1898 u32 form, u32 handle);
1899 int mpt3sas_config_get_pcie_iounit_pg1(struct MPT3SAS_ADAPTER *ioc,
1900 Mpi2ConfigReply_t *mpi_reply, Mpi26PCIeIOUnitPage1_t *config_page,
1901 u16 sz);
1902 int mpt3sas_config_get_sas_iounit_pg0(struct MPT3SAS_ADAPTER *ioc,
1903 Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage0_t *config_page,
1904 u16 sz);
1905 int mpt3sas_config_get_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
1906 *mpi_reply, Mpi2IOUnitPage1_t *config_page);
1907 int mpt3sas_config_get_iounit_pg3(struct MPT3SAS_ADAPTER *ioc,
1908 Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage3_t *config_page, u16 sz);
1909 int mpt3sas_config_set_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
1910 *mpi_reply, Mpi2IOUnitPage1_t *config_page);
1911 int mpt3sas_config_get_iounit_pg8(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
1912 *mpi_reply, Mpi2IOUnitPage8_t *config_page);
1913 int mpt3sas_config_get_sas_iounit_pg1(struct MPT3SAS_ADAPTER *ioc,
1914 Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page,
1915 u16 sz);
1916 int mpt3sas_config_set_sas_iounit_pg1(struct MPT3SAS_ADAPTER *ioc,
1917 Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page,
1918 u16 sz);
1919 int mpt3sas_config_get_ioc_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
1920 *mpi_reply, Mpi2IOCPage1_t *config_page);
1921 int mpt3sas_config_set_ioc_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
1922 *mpi_reply, Mpi2IOCPage1_t *config_page);
1923 int mpt3sas_config_get_ioc_pg8(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
1924 *mpi_reply, Mpi2IOCPage8_t *config_page);
1925 int mpt3sas_config_get_expander_pg0(struct MPT3SAS_ADAPTER *ioc,
1926 Mpi2ConfigReply_t *mpi_reply, Mpi2ExpanderPage0_t *config_page,
1927 u32 form, u32 handle);
1928 int mpt3sas_config_get_expander_pg1(struct MPT3SAS_ADAPTER *ioc,
1929 Mpi2ConfigReply_t *mpi_reply, Mpi2ExpanderPage1_t *config_page,
1930 u32 phy_number, u16 handle);
1931 int mpt3sas_config_get_enclosure_pg0(struct MPT3SAS_ADAPTER *ioc,
1932 Mpi2ConfigReply_t *mpi_reply, Mpi2SasEnclosurePage0_t *config_page,
1933 u32 form, u32 handle);
1934 int mpt3sas_config_get_phy_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
1935 *mpi_reply, Mpi2SasPhyPage0_t *config_page, u32 phy_number);
1936 int mpt3sas_config_get_phy_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
1937 *mpi_reply, Mpi2SasPhyPage1_t *config_page, u32 phy_number);
1938 int mpt3sas_config_get_raid_volume_pg1(struct MPT3SAS_ADAPTER *ioc,
1939 Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage1_t *config_page, u32 form,
1940 u32 handle);
1941 int mpt3sas_config_get_number_pds(struct MPT3SAS_ADAPTER *ioc, u16 handle,
1942 u8 *num_pds);
1943 int mpt3sas_config_get_raid_volume_pg0(struct MPT3SAS_ADAPTER *ioc,
1944 Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage0_t *config_page, u32 form,
1945 u32 handle, u16 sz);
1946 int mpt3sas_config_get_phys_disk_pg0(struct MPT3SAS_ADAPTER *ioc,
1947 Mpi2ConfigReply_t *mpi_reply, Mpi2RaidPhysDiskPage0_t *config_page,
1948 u32 form, u32 form_specific);
1949 int mpt3sas_config_get_volume_handle(struct MPT3SAS_ADAPTER *ioc, u16 pd_handle,
1950 u16 *volume_handle);
1951 int mpt3sas_config_get_volume_wwid(struct MPT3SAS_ADAPTER *ioc,
1952 u16 volume_handle, u64 *wwid);
1953 int
1954 mpt3sas_config_get_driver_trigger_pg0(struct MPT3SAS_ADAPTER *ioc,
1955 Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage0_t *config_page);
1956 int
1957 mpt3sas_config_get_driver_trigger_pg1(struct MPT3SAS_ADAPTER *ioc,
1958 Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage1_t *config_page);
1959 int
1960 mpt3sas_config_get_driver_trigger_pg2(struct MPT3SAS_ADAPTER *ioc,
1961 Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage2_t *config_page);
1962 int
1963 mpt3sas_config_get_driver_trigger_pg3(struct MPT3SAS_ADAPTER *ioc,
1964 Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage3_t *config_page);
1965 int
1966 mpt3sas_config_get_driver_trigger_pg4(struct MPT3SAS_ADAPTER *ioc,
1967 Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage4_t *config_page);
1968 int
1969 mpt3sas_config_update_driver_trigger_pg1(struct MPT3SAS_ADAPTER *ioc,
1970 struct SL_WH_MASTER_TRIGGER_T *master_tg, bool set);
1971 int
1972 mpt3sas_config_update_driver_trigger_pg2(struct MPT3SAS_ADAPTER *ioc,
1973 struct SL_WH_EVENT_TRIGGERS_T *event_tg, bool set);
1974 int
1975 mpt3sas_config_update_driver_trigger_pg3(struct MPT3SAS_ADAPTER *ioc,
1976 struct SL_WH_SCSI_TRIGGERS_T *scsi_tg, bool set);
1977 int
1978 mpt3sas_config_update_driver_trigger_pg4(struct MPT3SAS_ADAPTER *ioc,
1979 struct SL_WH_MPI_TRIGGERS_T *mpi_tg, bool set);
1980
1981 /* ctl shared API */
1982 extern const struct attribute_group *mpt3sas_host_groups[];
1983 extern const struct attribute_group *mpt3sas_dev_groups[];
1984 void mpt3sas_ctl_init(ushort hbas_to_enumerate);
1985 void mpt3sas_ctl_exit(ushort hbas_to_enumerate);
1986 u8 mpt3sas_ctl_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
1987 u32 reply);
1988 void mpt3sas_ctl_pre_reset_handler(struct MPT3SAS_ADAPTER *ioc);
1989 void mpt3sas_ctl_clear_outstanding_ioctls(struct MPT3SAS_ADAPTER *ioc);
1990 void mpt3sas_ctl_reset_done_handler(struct MPT3SAS_ADAPTER *ioc);
1991 u8 mpt3sas_ctl_event_callback(struct MPT3SAS_ADAPTER *ioc,
1992 u8 msix_index, u32 reply);
1993 void mpt3sas_ctl_add_to_event_log(struct MPT3SAS_ADAPTER *ioc,
1994 Mpi2EventNotificationReply_t *mpi_reply);
1995
1996 void mpt3sas_enable_diag_buffer(struct MPT3SAS_ADAPTER *ioc,
1997 u8 bits_to_register);
1998 int mpt3sas_send_diag_release(struct MPT3SAS_ADAPTER *ioc, u8 buffer_type,
1999 u8 *issue_reset);
2000
2001 /* transport shared API */
2002 extern struct scsi_transport_template *mpt3sas_transport_template;
2003 u8 mpt3sas_transport_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
2004 u32 reply);
2005 struct _sas_port *mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc,
2006 u16 handle, u64 sas_address, struct hba_port *port);
2007 void mpt3sas_transport_port_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
2008 u64 sas_address_parent, struct hba_port *port);
2009 int mpt3sas_transport_add_host_phy(struct MPT3SAS_ADAPTER *ioc, struct _sas_phy
2010 *mpt3sas_phy, Mpi2SasPhyPage0_t phy_pg0, struct device *parent_dev);
2011 int mpt3sas_transport_add_expander_phy(struct MPT3SAS_ADAPTER *ioc,
2012 struct _sas_phy *mpt3sas_phy, Mpi2ExpanderPage1_t expander_pg1,
2013 struct device *parent_dev);
2014 void mpt3sas_transport_update_links(struct MPT3SAS_ADAPTER *ioc,
2015 u64 sas_address, u16 handle, u8 phy_number, u8 link_rate,
2016 struct hba_port *port);
2017 extern struct sas_function_template mpt3sas_transport_functions;
2018 extern struct scsi_transport_template *mpt3sas_transport_template;
2019 void
2020 mpt3sas_transport_del_phy_from_an_existing_port(struct MPT3SAS_ADAPTER *ioc,
2021 struct _sas_node *sas_node, struct _sas_phy *mpt3sas_phy);
2022 void
2023 mpt3sas_transport_add_phy_to_an_existing_port(struct MPT3SAS_ADAPTER *ioc,
2024 struct _sas_node *sas_node, struct _sas_phy *mpt3sas_phy,
2025 u64 sas_address, struct hba_port *port);
2026 /* trigger data externs */
2027 void mpt3sas_send_trigger_data_event(struct MPT3SAS_ADAPTER *ioc,
2028 struct SL_WH_TRIGGERS_EVENT_DATA_T *event_data);
2029 void mpt3sas_process_trigger_data(struct MPT3SAS_ADAPTER *ioc,
2030 struct SL_WH_TRIGGERS_EVENT_DATA_T *event_data);
2031 void mpt3sas_trigger_master(struct MPT3SAS_ADAPTER *ioc,
2032 u32 trigger_bitmask);
2033 void mpt3sas_trigger_event(struct MPT3SAS_ADAPTER *ioc, u16 event,
2034 u16 log_entry_qualifier);
2035 void mpt3sas_trigger_scsi(struct MPT3SAS_ADAPTER *ioc, u8 sense_key,
2036 u8 asc, u8 ascq);
2037 void mpt3sas_trigger_mpi(struct MPT3SAS_ADAPTER *ioc, u16 ioc_status,
2038 u32 loginfo);
2039
2040 /* warpdrive APIs */
2041 u8 mpt3sas_get_num_volumes(struct MPT3SAS_ADAPTER *ioc);
2042 void mpt3sas_init_warpdrive_properties(struct MPT3SAS_ADAPTER *ioc,
2043 struct _raid_device *raid_device);
2044 void
2045 mpt3sas_setup_direct_io(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
2046 struct _raid_device *raid_device, Mpi25SCSIIORequest_t *mpi_request);
2047
2048 void mpt3sas_setup_debugfs(struct MPT3SAS_ADAPTER *ioc);
2049 void mpt3sas_destroy_debugfs(struct MPT3SAS_ADAPTER *ioc);
2050 void mpt3sas_init_debugfs(void);
2051 void mpt3sas_exit_debugfs(void);
2052
2053 /**
2054 * _scsih_is_pcie_scsi_device - determines if device is an pcie scsi device
2055 * @device_info: bitfield providing information about the device.
2056 * Context: none
2057 *
2058 * Returns 1 if scsi device.
2059 */
2060 static inline int
mpt3sas_scsih_is_pcie_scsi_device(u32 device_info)2061 mpt3sas_scsih_is_pcie_scsi_device(u32 device_info)
2062 {
2063 if ((device_info &
2064 MPI26_PCIE_DEVINFO_MASK_DEVICE_TYPE) == MPI26_PCIE_DEVINFO_SCSI)
2065 return 1;
2066 else
2067 return 0;
2068 }
2069 #endif /* MPT3SAS_BASE_H_INCLUDED */
2070