| /openbmc/linux/drivers/i2c/busses/ |
| H A D | i2c-mlxbf.c | 419 struct mlxbf_i2c_resource *slv; member
688 data32 = ioread32be(priv->slv->io + addr + offset); in mlxbf_i2c_smbus_read_data()
1590 slave_reg = readl(priv->slv->io + in mlxbf_i2c_slave_enable()
1612 writel(slave_reg, priv->slv->io + in mlxbf_i2c_slave_enable()
1647 slave_reg = readl(priv->slv->io + in mlxbf_i2c_slave_disable()
1668 writel(slave_reg, priv->slv->io + in mlxbf_i2c_slave_disable()
1877 data32 = ioread32be(priv->slv->io + in mlxbf_i2c_irq_send()
2043 rw_bytes_reg = readl(priv->slv->io + in mlxbf_i2c_irq()
2315 if (!priv->slv) in mlxbf_i2c_probe()
2337 ret = mlxbf_i2c_init_resource(pdev, &priv->slv, in mlxbf_i2c_probe()
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/phy/ |
| H A D | intel,keembay-phy-usb.yaml | 24 - const: slv-apb-base
42 reg-names = "cpr-apb-base", "slv-apb-base";
|
| /openbmc/linux/include/soc/arc/ |
| H A D | mcip.h | 66 msg:1, sem:1, ipi:1, slv:1, member
70 slv:1, ipi:1, sem:1, msg:1,
|
| /openbmc/linux/Documentation/devicetree/bindings/pci/ |
| H A D | baikal,bt1-pcie.yaml | 76 - const: slv
89 - const: slv
155 clock-names = "dbi", "mstr", "slv", "ref";
160 reset-names = "mstr", "slv", "pwr", "hot", "phy", "core", "pipe",
|
| H A D | snps,dw-pcie-common.yaml | 88 const: slv
119 - description: See native 'mstr/slv' clock for details
152 const: slv
|
| /openbmc/linux/drivers/spi/ |
| H A D | spi-geni-qcom.c | 287 static void spi_geni_set_cs(struct spi_device *slv, bool set_flag) in spi_geni_set_cs() argument
289 struct spi_geni_master *mas = spi_master_get_devdata(slv->master); in spi_geni_set_cs()
294 if (!(slv->mode & SPI_CS_HIGH)) in spi_geni_set_cs()
561 struct spi_device *slv, struct spi_transfer *xfer) in geni_can_dma() argument
563 struct spi_geni_master *mas = spi_master_get_devdata(slv->master); in geni_can_dma()
917 struct spi_device *slv, in spi_geni_transfer_one() argument
931 ret = setup_se_xfer(xfer, mas, slv->mode, spi); in spi_geni_transfer_one()
937 return setup_gsi_xfer(xfer, mas, slv, spi); in spi_geni_transfer_one()
|
| H A D | spi-qcom-qspi.c | 409 struct spi_device *slv, struct spi_transfer *xfer) in qcom_qspi_can_dma() argument
415 struct spi_device *slv, in qcom_qspi_transfer_one() argument
424 speed_hz = slv->max_speed_hz; in qcom_qspi_transfer_one()
|
| /openbmc/linux/fs/jfs/ |
| H A D | jfs_dtree.c | 1395 slv = & sdtlck->lv[0]; in dtSplitPage()
1396 slv->offset = 0; in dtSplitPage()
1397 slv->length = 1; in dtSplitPage()
1601 slv->length = in dtSplitPage()
3771 struct lv *slv, *dlv; in dtMoveEntry() local
3801 slv->length = ns; in dtMoveEntry()
3806 slv++; in dtMoveEntry()
3812 slv->offset = ssi; in dtMoveEntry()
3873 slv->length = ns; in dtMoveEntry()
3878 slv++; in dtMoveEntry()
[all …]
|
| /openbmc/linux/drivers/phy/freescale/ |
| H A D | phy-fsl-imx8qm-lvds-phy.c | 186 struct mixel_lvds_phy *slv = phy_get_drvdata(slave_phy); in mixel_lvds_phy_check_slave() local
187 struct mixel_lvds_phy *mst = priv->phys[slv->id ^ 1]; in mixel_lvds_phy_check_slave()
189 struct phy_configure_opts_lvds *slv_cfg = &slv->cfg; in mixel_lvds_phy_check_slave()
|
| /openbmc/linux/arch/arm64/boot/dts/amlogic/ |
| H A D | meson-g12-common.dtsi | 1117 tdm_a_slv_fs_pins: tdm-a-slv-fs {
1126 tdm_a_slv_sclk_pins: tdm-a-slv-sclk {
1237 tdm_b_slv_fs_pins: tdm-b-slv-fs {
1245 tdm_b_slv_sclk_pins: tdm-b-slv-sclk {
1464 tdm_c_slv_fs_a_pins: tdm-c-slv-fs-a {
1472 tdm_c_slv_fs_z_pins: tdm-c-slv-fs-z {
1480 tdm_c_slv_sclk_a_pins: tdm-c-slv-sclk-a {
1488 tdm_c_slv_sclk_z_pins: tdm-c-slv-sclk-z {
1878 tdm_ao_b_slv_fs_pins: tdm-ao-b-slv-fs {
1886 tdm_ao_b_slv_sclk_pins: tdm-ao-b-slv-sclk {
|
| /openbmc/linux/drivers/media/platform/ti/omap3isp/ |
| H A D | isppreview.c | 1068 unsigned int slv = prev->crop.top; in preview_config_input_size() local
1076 slv -= 2; in preview_config_input_size()
1086 slv -= 2; in preview_config_input_size()
1098 isp_reg_writel(isp, (slv << ISPPRV_VERT_INFO_SLV_SHIFT) | elv, in preview_config_input_size()
|