1 /* SPDX-License-Identifier: GPL-2.0+ 2 * 3 * include/asm-sh/watchdog.h 4 * 5 * Copyright (C) 2002, 2003 Paul Mundt 6 * Copyright (C) 2009 Siemens AG 7 * Copyright (C) 2009 Valentin Sitdikov 8 */ 9 #ifndef __ASM_SH_WATCHDOG_H 10 #define __ASM_SH_WATCHDOG_H 11 12 #include <linux/types.h> 13 #include <linux/io.h> 14 15 #define WTCNT_HIGH 0x5a 16 #define WTCSR_HIGH 0xa5 17 18 #define WTCSR_CKS2 0x04 19 #define WTCSR_CKS1 0x02 20 #define WTCSR_CKS0 0x01 21 22 #include <cpu/watchdog.h> 23 24 /* 25 * See cpu-sh2/watchdog.h for explanation of this stupidity.. 26 */ 27 #ifndef WTCNT_R 28 # define WTCNT_R WTCNT 29 #endif 30 31 #ifndef WTCSR_R 32 # define WTCSR_R WTCSR 33 #endif 34 35 /* 36 * CKS0-2 supports a number of clock division ratios. At the time the watchdog 37 * is enabled, it defaults to a 41 usec overflow period .. we overload this to 38 * something a little more reasonable, and really can't deal with anything 39 * lower than WTCSR_CKS_1024, else we drop back into the usec range. 40 * 41 * Clock Division Ratio Overflow Period 42 * -------------------------------------------- 43 * 1/32 (initial value) 41 usecs 44 * 1/64 82 usecs 45 * 1/128 164 usecs 46 * 1/256 328 usecs 47 * 1/512 656 usecs 48 * 1/1024 1.31 msecs 49 * 1/2048 2.62 msecs 50 * 1/4096 5.25 msecs 51 */ 52 #define WTCSR_CKS_32 0x00 53 #define WTCSR_CKS_64 0x01 54 #define WTCSR_CKS_128 0x02 55 #define WTCSR_CKS_256 0x03 56 #define WTCSR_CKS_512 0x04 57 #define WTCSR_CKS_1024 0x05 58 #define WTCSR_CKS_2048 0x06 59 #define WTCSR_CKS_4096 0x07 60 61 #if defined(CONFIG_CPU_SUBTYPE_SH7785) || defined(CONFIG_CPU_SUBTYPE_SH7780) 62 /** 63 * sh_wdt_read_cnt - Read from Counter 64 * Reads back the WTCNT value. 65 */ sh_wdt_read_cnt(void)66static inline __u32 sh_wdt_read_cnt(void) 67 { 68 return __raw_readl(WTCNT_R); 69 } 70 71 /** 72 * sh_wdt_write_cnt - Write to Counter 73 * @val: Value to write 74 * 75 * Writes the given value @val to the lower byte of the timer counter. 76 * The upper byte is set manually on each write. 77 */ sh_wdt_write_cnt(__u32 val)78static inline void sh_wdt_write_cnt(__u32 val) 79 { 80 __raw_writel((WTCNT_HIGH << 24) | (__u32)val, WTCNT); 81 } 82 83 /** 84 * sh_wdt_write_bst - Write to Counter 85 * @val: Value to write 86 * 87 * Writes the given value @val to the lower byte of the timer counter. 88 * The upper byte is set manually on each write. 89 */ sh_wdt_write_bst(__u32 val)90static inline void sh_wdt_write_bst(__u32 val) 91 { 92 __raw_writel((WTBST_HIGH << 24) | (__u32)val, WTBST); 93 } 94 /** 95 * sh_wdt_read_csr - Read from Control/Status Register 96 * 97 * Reads back the WTCSR value. 98 */ sh_wdt_read_csr(void)99static inline __u32 sh_wdt_read_csr(void) 100 { 101 return __raw_readl(WTCSR_R); 102 } 103 104 /** 105 * sh_wdt_write_csr - Write to Control/Status Register 106 * @val: Value to write 107 * 108 * Writes the given value @val to the lower byte of the control/status 109 * register. The upper byte is set manually on each write. 110 */ sh_wdt_write_csr(__u32 val)111static inline void sh_wdt_write_csr(__u32 val) 112 { 113 __raw_writel((WTCSR_HIGH << 24) | (__u32)val, WTCSR); 114 } 115 #else 116 /** 117 * sh_wdt_read_cnt - Read from Counter 118 * Reads back the WTCNT value. 119 */ sh_wdt_read_cnt(void)120static inline __u8 sh_wdt_read_cnt(void) 121 { 122 return __raw_readb(WTCNT_R); 123 } 124 125 /** 126 * sh_wdt_write_cnt - Write to Counter 127 * @val: Value to write 128 * 129 * Writes the given value @val to the lower byte of the timer counter. 130 * The upper byte is set manually on each write. 131 */ sh_wdt_write_cnt(__u8 val)132static inline void sh_wdt_write_cnt(__u8 val) 133 { 134 __raw_writew((WTCNT_HIGH << 8) | (__u16)val, WTCNT); 135 } 136 137 /** 138 * sh_wdt_read_csr - Read from Control/Status Register 139 * 140 * Reads back the WTCSR value. 141 */ sh_wdt_read_csr(void)142static inline __u8 sh_wdt_read_csr(void) 143 { 144 return __raw_readb(WTCSR_R); 145 } 146 147 /** 148 * sh_wdt_write_csr - Write to Control/Status Register 149 * @val: Value to write 150 * 151 * Writes the given value @val to the lower byte of the control/status 152 * register. The upper byte is set manually on each write. 153 */ sh_wdt_write_csr(__u8 val)154static inline void sh_wdt_write_csr(__u8 val) 155 { 156 __raw_writew((WTCSR_HIGH << 8) | (__u16)val, WTCSR); 157 } 158 #endif /* CONFIG_CPU_SUBTYPE_SH7785 || CONFIG_CPU_SUBTYPE_SH7780 */ 159 #endif /* __ASM_SH_WATCHDOG_H */ 160