1 /*
2  * Driver for batteries with DS2760 chips inside.
3  *
4  * Copyright © 2007 Anton Vorontsov
5  *	       2004-2007 Matt Reimer
6  *	       2004 Szabolcs Gyurko
7  *
8  * Use consistent with the GNU GPL is permitted,
9  * provided that this copyright notice is
10  * preserved in its entirety in all copies and derived works.
11  *
12  * Author:  Anton Vorontsov <cbou@mail.ru>
13  *	    February 2007
14  *
15  *	    Matt Reimer <mreimer@vpop.net>
16  *	    April 2004, 2005, 2007
17  *
18  *	    Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
19  *	    September 2004
20  */
21 
22 #include <linux/module.h>
23 #include <linux/param.h>
24 #include <linux/jiffies.h>
25 #include <linux/workqueue.h>
26 #include <linux/pm.h>
27 #include <linux/slab.h>
28 #include <linux/platform_device.h>
29 #include <linux/power_supply.h>
30 #include <linux/suspend.h>
31 #include <linux/w1.h>
32 #include <linux/of.h>
33 
34 static unsigned int cache_time = 1000;
35 module_param(cache_time, uint, 0644);
36 MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
37 
38 static bool pmod_enabled;
39 module_param(pmod_enabled, bool, 0644);
40 MODULE_PARM_DESC(pmod_enabled, "PMOD enable bit");
41 
42 static unsigned int rated_capacity;
43 module_param(rated_capacity, uint, 0644);
44 MODULE_PARM_DESC(rated_capacity, "rated battery capacity, 10*mAh or index");
45 
46 static unsigned int current_accum;
47 module_param(current_accum, uint, 0644);
48 MODULE_PARM_DESC(current_accum, "current accumulator value");
49 
50 #define W1_FAMILY_DS2760		0x30
51 
52 /* Known commands to the DS2760 chip */
53 #define W1_DS2760_SWAP			0xAA
54 #define W1_DS2760_READ_DATA		0x69
55 #define W1_DS2760_WRITE_DATA		0x6C
56 #define W1_DS2760_COPY_DATA		0x48
57 #define W1_DS2760_RECALL_DATA		0xB8
58 #define W1_DS2760_LOCK			0x6A
59 
60 /* Number of valid register addresses */
61 #define DS2760_DATA_SIZE		0x40
62 
63 #define DS2760_PROTECTION_REG		0x00
64 
65 #define DS2760_STATUS_REG		0x01
66 #define DS2760_STATUS_IE		(1 << 2)
67 #define DS2760_STATUS_SWEN		(1 << 3)
68 #define DS2760_STATUS_RNAOP		(1 << 4)
69 #define DS2760_STATUS_PMOD		(1 << 5)
70 
71 #define DS2760_EEPROM_REG		0x07
72 #define DS2760_SPECIAL_FEATURE_REG	0x08
73 #define DS2760_VOLTAGE_MSB		0x0c
74 #define DS2760_VOLTAGE_LSB		0x0d
75 #define DS2760_CURRENT_MSB		0x0e
76 #define DS2760_CURRENT_LSB		0x0f
77 #define DS2760_CURRENT_ACCUM_MSB	0x10
78 #define DS2760_CURRENT_ACCUM_LSB	0x11
79 #define DS2760_TEMP_MSB			0x18
80 #define DS2760_TEMP_LSB			0x19
81 #define DS2760_EEPROM_BLOCK0		0x20
82 #define DS2760_ACTIVE_FULL		0x20
83 #define DS2760_EEPROM_BLOCK1		0x30
84 #define DS2760_STATUS_WRITE_REG		0x31
85 #define DS2760_RATED_CAPACITY		0x32
86 #define DS2760_CURRENT_OFFSET_BIAS	0x33
87 #define DS2760_ACTIVE_EMPTY		0x3b
88 
89 struct ds2760_device_info {
90 	struct device *dev;
91 
92 	/* DS2760 data, valid after calling ds2760_battery_read_status() */
93 	unsigned long update_time;	/* jiffies when data read */
94 	char raw[DS2760_DATA_SIZE];	/* raw DS2760 data */
95 	int voltage_raw;		/* units of 4.88 mV */
96 	int voltage_uV;			/* units of µV */
97 	int current_raw;		/* units of 0.625 mA */
98 	int current_uA;			/* units of µA */
99 	int accum_current_raw;		/* units of 0.25 mAh */
100 	int accum_current_uAh;		/* units of µAh */
101 	int temp_raw;			/* units of 0.125 °C */
102 	int temp_C;			/* units of 0.1 °C */
103 	int rated_capacity;		/* units of µAh */
104 	int rem_capacity;		/* percentage */
105 	int full_active_uAh;		/* units of µAh */
106 	int empty_uAh;			/* units of µAh */
107 	int life_sec;			/* units of seconds */
108 	int charge_status;		/* POWER_SUPPLY_STATUS_* */
109 
110 	int full_counter;
111 	struct power_supply *bat;
112 	struct power_supply_desc bat_desc;
113 	struct workqueue_struct *monitor_wqueue;
114 	struct delayed_work monitor_work;
115 	struct delayed_work set_charged_work;
116 	struct notifier_block pm_notifier;
117 };
118 
w1_ds2760_io(struct device * dev,char * buf,int addr,size_t count,int io)119 static int w1_ds2760_io(struct device *dev, char *buf, int addr, size_t count,
120 			int io)
121 {
122 	struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
123 
124 	if (!dev)
125 		return 0;
126 
127 	mutex_lock(&sl->master->bus_mutex);
128 
129 	if (addr > DS2760_DATA_SIZE || addr < 0) {
130 		count = 0;
131 		goto out;
132 	}
133 	if (addr + count > DS2760_DATA_SIZE)
134 		count = DS2760_DATA_SIZE - addr;
135 
136 	if (!w1_reset_select_slave(sl)) {
137 		if (!io) {
138 			w1_write_8(sl->master, W1_DS2760_READ_DATA);
139 			w1_write_8(sl->master, addr);
140 			count = w1_read_block(sl->master, buf, count);
141 		} else {
142 			w1_write_8(sl->master, W1_DS2760_WRITE_DATA);
143 			w1_write_8(sl->master, addr);
144 			w1_write_block(sl->master, buf, count);
145 			/* XXX w1_write_block returns void, not n_written */
146 		}
147 	}
148 
149 out:
150 	mutex_unlock(&sl->master->bus_mutex);
151 
152 	return count;
153 }
154 
w1_ds2760_read(struct device * dev,char * buf,int addr,size_t count)155 static int w1_ds2760_read(struct device *dev,
156 			  char *buf, int addr,
157 			  size_t count)
158 {
159 	return w1_ds2760_io(dev, buf, addr, count, 0);
160 }
161 
w1_ds2760_write(struct device * dev,char * buf,int addr,size_t count)162 static int w1_ds2760_write(struct device *dev,
163 			   char *buf,
164 			   int addr, size_t count)
165 {
166 	return w1_ds2760_io(dev, buf, addr, count, 1);
167 }
168 
w1_ds2760_eeprom_cmd(struct device * dev,int addr,int cmd)169 static int w1_ds2760_eeprom_cmd(struct device *dev, int addr, int cmd)
170 {
171 	struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
172 
173 	if (!dev)
174 		return -EINVAL;
175 
176 	mutex_lock(&sl->master->bus_mutex);
177 
178 	if (w1_reset_select_slave(sl) == 0) {
179 		w1_write_8(sl->master, cmd);
180 		w1_write_8(sl->master, addr);
181 	}
182 
183 	mutex_unlock(&sl->master->bus_mutex);
184 	return 0;
185 }
186 
w1_ds2760_store_eeprom(struct device * dev,int addr)187 static int w1_ds2760_store_eeprom(struct device *dev, int addr)
188 {
189 	return w1_ds2760_eeprom_cmd(dev, addr, W1_DS2760_COPY_DATA);
190 }
191 
w1_ds2760_recall_eeprom(struct device * dev,int addr)192 static int w1_ds2760_recall_eeprom(struct device *dev, int addr)
193 {
194 	return w1_ds2760_eeprom_cmd(dev, addr, W1_DS2760_RECALL_DATA);
195 }
196 
w1_slave_read(struct file * filp,struct kobject * kobj,struct bin_attribute * bin_attr,char * buf,loff_t off,size_t count)197 static ssize_t w1_slave_read(struct file *filp, struct kobject *kobj,
198 			     struct bin_attribute *bin_attr, char *buf,
199 			     loff_t off, size_t count)
200 {
201 	struct device *dev = kobj_to_dev(kobj);
202 	return w1_ds2760_read(dev, buf, off, count);
203 }
204 
205 static BIN_ATTR_RO(w1_slave, DS2760_DATA_SIZE);
206 
207 static struct bin_attribute *w1_ds2760_bin_attrs[] = {
208 	&bin_attr_w1_slave,
209 	NULL,
210 };
211 
212 static const struct attribute_group w1_ds2760_group = {
213 	.bin_attrs = w1_ds2760_bin_attrs,
214 };
215 
216 static const struct attribute_group *w1_ds2760_groups[] = {
217 	&w1_ds2760_group,
218 	NULL,
219 };
220 /* Some batteries have their rated capacity stored a N * 10 mAh, while
221  * others use an index into this table. */
222 static int rated_capacities[] = {
223 	0,
224 	920,	/* Samsung */
225 	920,	/* BYD */
226 	920,	/* Lishen */
227 	920,	/* NEC */
228 	1440,	/* Samsung */
229 	1440,	/* BYD */
230 	1440,	/* Lishen */
231 	1440,	/* NEC */
232 	2880,	/* Samsung */
233 	2880,	/* BYD */
234 	2880,	/* Lishen */
235 	2880,	/* NEC */
236 };
237 
238 /* array is level at temps 0°C, 10°C, 20°C, 30°C, 40°C
239  * temp is in Celsius */
battery_interpolate(int array[],int temp)240 static int battery_interpolate(int array[], int temp)
241 {
242 	int index, dt;
243 
244 	if (temp <= 0)
245 		return array[0];
246 	if (temp >= 40)
247 		return array[4];
248 
249 	index = temp / 10;
250 	dt    = temp % 10;
251 
252 	return array[index] + (((array[index + 1] - array[index]) * dt) / 10);
253 }
254 
ds2760_battery_read_status(struct ds2760_device_info * di)255 static int ds2760_battery_read_status(struct ds2760_device_info *di)
256 {
257 	int ret, i, start, count, scale[5];
258 
259 	if (di->update_time && time_before(jiffies, di->update_time +
260 					   msecs_to_jiffies(cache_time)))
261 		return 0;
262 
263 	/* The first time we read the entire contents of SRAM/EEPROM,
264 	 * but after that we just read the interesting bits that change. */
265 	if (di->update_time == 0) {
266 		start = 0;
267 		count = DS2760_DATA_SIZE;
268 	} else {
269 		start = DS2760_VOLTAGE_MSB;
270 		count = DS2760_TEMP_LSB - start + 1;
271 	}
272 
273 	ret = w1_ds2760_read(di->dev, di->raw + start, start, count);
274 	if (ret != count) {
275 		dev_warn(di->dev, "call to w1_ds2760_read failed (0x%p)\n",
276 			 di->dev);
277 		return 1;
278 	}
279 
280 	di->update_time = jiffies;
281 
282 	/* DS2760 reports voltage in units of 4.88mV, but the battery class
283 	 * reports in units of uV, so convert by multiplying by 4880. */
284 	di->voltage_raw = (di->raw[DS2760_VOLTAGE_MSB] << 3) |
285 			  (di->raw[DS2760_VOLTAGE_LSB] >> 5);
286 	di->voltage_uV = di->voltage_raw * 4880;
287 
288 	/* DS2760 reports current in signed units of 0.625mA, but the battery
289 	 * class reports in units of µA, so convert by multiplying by 625. */
290 	di->current_raw =
291 	    (((signed char)di->raw[DS2760_CURRENT_MSB]) << 5) |
292 			  (di->raw[DS2760_CURRENT_LSB] >> 3);
293 	di->current_uA = di->current_raw * 625;
294 
295 	/* DS2760 reports accumulated current in signed units of 0.25mAh. */
296 	di->accum_current_raw =
297 	    (((signed char)di->raw[DS2760_CURRENT_ACCUM_MSB]) << 8) |
298 			   di->raw[DS2760_CURRENT_ACCUM_LSB];
299 	di->accum_current_uAh = di->accum_current_raw * 250;
300 
301 	/* DS2760 reports temperature in signed units of 0.125°C, but the
302 	 * battery class reports in units of 1/10 °C, so we convert by
303 	 * multiplying by .125 * 10 = 1.25. */
304 	di->temp_raw = (((signed char)di->raw[DS2760_TEMP_MSB]) << 3) |
305 				     (di->raw[DS2760_TEMP_LSB] >> 5);
306 	di->temp_C = di->temp_raw + (di->temp_raw / 4);
307 
308 	/* At least some battery monitors (e.g. HP iPAQ) store the battery's
309 	 * maximum rated capacity. */
310 	if (di->raw[DS2760_RATED_CAPACITY] < ARRAY_SIZE(rated_capacities))
311 		di->rated_capacity = rated_capacities[
312 			(unsigned int)di->raw[DS2760_RATED_CAPACITY]];
313 	else
314 		di->rated_capacity = di->raw[DS2760_RATED_CAPACITY] * 10;
315 
316 	di->rated_capacity *= 1000; /* convert to µAh */
317 
318 	/* Calculate the full level at the present temperature. */
319 	di->full_active_uAh = di->raw[DS2760_ACTIVE_FULL] << 8 |
320 			      di->raw[DS2760_ACTIVE_FULL + 1];
321 
322 	/* If the full_active_uAh value is not given, fall back to the rated
323 	 * capacity. This is likely to happen when chips are not part of the
324 	 * battery pack and is therefore not bootstrapped. */
325 	if (di->full_active_uAh == 0)
326 		di->full_active_uAh = di->rated_capacity / 1000L;
327 
328 	scale[0] = di->full_active_uAh;
329 	for (i = 1; i < 5; i++)
330 		scale[i] = scale[i - 1] + di->raw[DS2760_ACTIVE_FULL + 1 + i];
331 
332 	di->full_active_uAh = battery_interpolate(scale, di->temp_C / 10);
333 	di->full_active_uAh *= 1000; /* convert to µAh */
334 
335 	/* Calculate the empty level at the present temperature. */
336 	scale[4] = di->raw[DS2760_ACTIVE_EMPTY + 4];
337 	for (i = 3; i >= 0; i--)
338 		scale[i] = scale[i + 1] + di->raw[DS2760_ACTIVE_EMPTY + i];
339 
340 	di->empty_uAh = battery_interpolate(scale, di->temp_C / 10);
341 	di->empty_uAh *= 1000; /* convert to µAh */
342 
343 	if (di->full_active_uAh == di->empty_uAh)
344 		di->rem_capacity = 0;
345 	else
346 		/* From Maxim Application Note 131: remaining capacity =
347 		 * ((ICA - Empty Value) / (Full Value - Empty Value)) x 100% */
348 		di->rem_capacity = ((di->accum_current_uAh - di->empty_uAh) * 100L) /
349 				    (di->full_active_uAh - di->empty_uAh);
350 
351 	if (di->rem_capacity < 0)
352 		di->rem_capacity = 0;
353 	if (di->rem_capacity > 100)
354 		di->rem_capacity = 100;
355 
356 	if (di->current_uA < -100L)
357 		di->life_sec = -((di->accum_current_uAh - di->empty_uAh) * 36L)
358 					/ (di->current_uA / 100L);
359 	else
360 		di->life_sec = 0;
361 
362 	return 0;
363 }
364 
ds2760_battery_set_current_accum(struct ds2760_device_info * di,unsigned int acr_val)365 static void ds2760_battery_set_current_accum(struct ds2760_device_info *di,
366 					     unsigned int acr_val)
367 {
368 	unsigned char acr[2];
369 
370 	/* acr is in units of 0.25 mAh */
371 	acr_val *= 4L;
372 	acr_val /= 1000;
373 
374 	acr[0] = acr_val >> 8;
375 	acr[1] = acr_val & 0xff;
376 
377 	if (w1_ds2760_write(di->dev, acr, DS2760_CURRENT_ACCUM_MSB, 2) < 2)
378 		dev_warn(di->dev, "ACR write failed\n");
379 }
380 
ds2760_battery_update_status(struct ds2760_device_info * di)381 static void ds2760_battery_update_status(struct ds2760_device_info *di)
382 {
383 	int old_charge_status = di->charge_status;
384 
385 	ds2760_battery_read_status(di);
386 
387 	if (di->charge_status == POWER_SUPPLY_STATUS_UNKNOWN)
388 		di->full_counter = 0;
389 
390 	if (power_supply_am_i_supplied(di->bat)) {
391 		if (di->current_uA > 10000) {
392 			di->charge_status = POWER_SUPPLY_STATUS_CHARGING;
393 			di->full_counter = 0;
394 		} else if (di->current_uA < -5000) {
395 			if (di->charge_status != POWER_SUPPLY_STATUS_NOT_CHARGING)
396 				dev_notice(di->dev, "not enough power to "
397 					   "charge\n");
398 			di->charge_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
399 			di->full_counter = 0;
400 		} else if (di->current_uA < 10000 &&
401 			    di->charge_status != POWER_SUPPLY_STATUS_FULL) {
402 
403 			/* Don't consider the battery to be full unless
404 			 * we've seen the current < 10 mA at least two
405 			 * consecutive times. */
406 
407 			di->full_counter++;
408 
409 			if (di->full_counter < 2) {
410 				di->charge_status = POWER_SUPPLY_STATUS_CHARGING;
411 			} else {
412 				di->charge_status = POWER_SUPPLY_STATUS_FULL;
413 				ds2760_battery_set_current_accum(di,
414 						di->full_active_uAh);
415 			}
416 		}
417 	} else {
418 		di->charge_status = POWER_SUPPLY_STATUS_DISCHARGING;
419 		di->full_counter = 0;
420 	}
421 
422 	if (di->charge_status != old_charge_status)
423 		power_supply_changed(di->bat);
424 }
425 
ds2760_battery_write_status(struct ds2760_device_info * di,char status)426 static void ds2760_battery_write_status(struct ds2760_device_info *di,
427 					char status)
428 {
429 	if (status == di->raw[DS2760_STATUS_REG])
430 		return;
431 
432 	w1_ds2760_write(di->dev, &status, DS2760_STATUS_WRITE_REG, 1);
433 	w1_ds2760_store_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
434 	w1_ds2760_recall_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
435 }
436 
ds2760_battery_write_rated_capacity(struct ds2760_device_info * di,unsigned char rated_capacity)437 static void ds2760_battery_write_rated_capacity(struct ds2760_device_info *di,
438 						unsigned char rated_capacity)
439 {
440 	if (rated_capacity == di->raw[DS2760_RATED_CAPACITY])
441 		return;
442 
443 	w1_ds2760_write(di->dev, &rated_capacity, DS2760_RATED_CAPACITY, 1);
444 	w1_ds2760_store_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
445 	w1_ds2760_recall_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
446 }
447 
ds2760_battery_write_active_full(struct ds2760_device_info * di,int active_full)448 static void ds2760_battery_write_active_full(struct ds2760_device_info *di,
449 					     int active_full)
450 {
451 	unsigned char tmp[2] = {
452 		active_full >> 8,
453 		active_full & 0xff
454 	};
455 
456 	if (tmp[0] == di->raw[DS2760_ACTIVE_FULL] &&
457 	    tmp[1] == di->raw[DS2760_ACTIVE_FULL + 1])
458 		return;
459 
460 	w1_ds2760_write(di->dev, tmp, DS2760_ACTIVE_FULL, sizeof(tmp));
461 	w1_ds2760_store_eeprom(di->dev, DS2760_EEPROM_BLOCK0);
462 	w1_ds2760_recall_eeprom(di->dev, DS2760_EEPROM_BLOCK0);
463 
464 	/* Write to the di->raw[] buffer directly - the DS2760_ACTIVE_FULL
465 	 * values won't be read back by ds2760_battery_read_status() */
466 	di->raw[DS2760_ACTIVE_FULL] = tmp[0];
467 	di->raw[DS2760_ACTIVE_FULL + 1] = tmp[1];
468 }
469 
ds2760_battery_work(struct work_struct * work)470 static void ds2760_battery_work(struct work_struct *work)
471 {
472 	struct ds2760_device_info *di = container_of(work,
473 		struct ds2760_device_info, monitor_work.work);
474 	const int interval = HZ * 60;
475 
476 	dev_dbg(di->dev, "%s\n", __func__);
477 
478 	ds2760_battery_update_status(di);
479 	queue_delayed_work(di->monitor_wqueue, &di->monitor_work, interval);
480 }
481 
ds2760_battery_external_power_changed(struct power_supply * psy)482 static void ds2760_battery_external_power_changed(struct power_supply *psy)
483 {
484 	struct ds2760_device_info *di = power_supply_get_drvdata(psy);
485 
486 	dev_dbg(di->dev, "%s\n", __func__);
487 
488 	mod_delayed_work(di->monitor_wqueue, &di->monitor_work, HZ/10);
489 }
490 
491 
ds2760_battery_set_charged_work(struct work_struct * work)492 static void ds2760_battery_set_charged_work(struct work_struct *work)
493 {
494 	char bias;
495 	struct ds2760_device_info *di = container_of(work,
496 		struct ds2760_device_info, set_charged_work.work);
497 
498 	dev_dbg(di->dev, "%s\n", __func__);
499 
500 	ds2760_battery_read_status(di);
501 
502 	/* When we get notified by external circuitry that the battery is
503 	 * considered fully charged now, we know that there is no current
504 	 * flow any more. However, the ds2760's internal current meter is
505 	 * too inaccurate to rely on - spec say something ~15% failure.
506 	 * Hence, we use the current offset bias register to compensate
507 	 * that error.
508 	 */
509 
510 	if (!power_supply_am_i_supplied(di->bat))
511 		return;
512 
513 	bias = (signed char) di->current_raw +
514 		(signed char) di->raw[DS2760_CURRENT_OFFSET_BIAS];
515 
516 	dev_dbg(di->dev, "%s: bias = %d\n", __func__, bias);
517 
518 	w1_ds2760_write(di->dev, &bias, DS2760_CURRENT_OFFSET_BIAS, 1);
519 	w1_ds2760_store_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
520 	w1_ds2760_recall_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
521 
522 	/* Write to the di->raw[] buffer directly - the CURRENT_OFFSET_BIAS
523 	 * value won't be read back by ds2760_battery_read_status() */
524 	di->raw[DS2760_CURRENT_OFFSET_BIAS] = bias;
525 }
526 
ds2760_battery_set_charged(struct power_supply * psy)527 static void ds2760_battery_set_charged(struct power_supply *psy)
528 {
529 	struct ds2760_device_info *di = power_supply_get_drvdata(psy);
530 
531 	/* postpone the actual work by 20 secs. This is for debouncing GPIO
532 	 * signals and to let the current value settle. See AN4188. */
533 	mod_delayed_work(di->monitor_wqueue, &di->set_charged_work, HZ * 20);
534 }
535 
ds2760_battery_get_property(struct power_supply * psy,enum power_supply_property psp,union power_supply_propval * val)536 static int ds2760_battery_get_property(struct power_supply *psy,
537 				       enum power_supply_property psp,
538 				       union power_supply_propval *val)
539 {
540 	struct ds2760_device_info *di = power_supply_get_drvdata(psy);
541 
542 	switch (psp) {
543 	case POWER_SUPPLY_PROP_STATUS:
544 		val->intval = di->charge_status;
545 		return 0;
546 	default:
547 		break;
548 	}
549 
550 	ds2760_battery_read_status(di);
551 
552 	switch (psp) {
553 	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
554 		val->intval = di->voltage_uV;
555 		break;
556 	case POWER_SUPPLY_PROP_CURRENT_NOW:
557 		val->intval = di->current_uA;
558 		break;
559 	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
560 		val->intval = di->rated_capacity;
561 		break;
562 	case POWER_SUPPLY_PROP_CHARGE_FULL:
563 		val->intval = di->full_active_uAh;
564 		break;
565 	case POWER_SUPPLY_PROP_CHARGE_EMPTY:
566 		val->intval = di->empty_uAh;
567 		break;
568 	case POWER_SUPPLY_PROP_CHARGE_NOW:
569 		val->intval = di->accum_current_uAh;
570 		break;
571 	case POWER_SUPPLY_PROP_TEMP:
572 		val->intval = di->temp_C;
573 		break;
574 	case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
575 		val->intval = di->life_sec;
576 		break;
577 	case POWER_SUPPLY_PROP_CAPACITY:
578 		val->intval = di->rem_capacity;
579 		break;
580 	default:
581 		return -EINVAL;
582 	}
583 
584 	return 0;
585 }
586 
ds2760_battery_set_property(struct power_supply * psy,enum power_supply_property psp,const union power_supply_propval * val)587 static int ds2760_battery_set_property(struct power_supply *psy,
588 				       enum power_supply_property psp,
589 				       const union power_supply_propval *val)
590 {
591 	struct ds2760_device_info *di = power_supply_get_drvdata(psy);
592 
593 	switch (psp) {
594 	case POWER_SUPPLY_PROP_CHARGE_FULL:
595 		/* the interface counts in uAh, convert the value */
596 		ds2760_battery_write_active_full(di, val->intval / 1000L);
597 		break;
598 
599 	case POWER_SUPPLY_PROP_CHARGE_NOW:
600 		/* ds2760_battery_set_current_accum() does the conversion */
601 		ds2760_battery_set_current_accum(di, val->intval);
602 		break;
603 
604 	default:
605 		return -EPERM;
606 	}
607 
608 	return 0;
609 }
610 
ds2760_battery_property_is_writeable(struct power_supply * psy,enum power_supply_property psp)611 static int ds2760_battery_property_is_writeable(struct power_supply *psy,
612 						enum power_supply_property psp)
613 {
614 	switch (psp) {
615 	case POWER_SUPPLY_PROP_CHARGE_FULL:
616 	case POWER_SUPPLY_PROP_CHARGE_NOW:
617 		return 1;
618 
619 	default:
620 		break;
621 	}
622 
623 	return 0;
624 }
625 
626 static enum power_supply_property ds2760_battery_props[] = {
627 	POWER_SUPPLY_PROP_STATUS,
628 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
629 	POWER_SUPPLY_PROP_CURRENT_NOW,
630 	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
631 	POWER_SUPPLY_PROP_CHARGE_FULL,
632 	POWER_SUPPLY_PROP_CHARGE_EMPTY,
633 	POWER_SUPPLY_PROP_CHARGE_NOW,
634 	POWER_SUPPLY_PROP_TEMP,
635 	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
636 	POWER_SUPPLY_PROP_CAPACITY,
637 };
638 
ds2760_pm_notifier(struct notifier_block * notifier,unsigned long pm_event,void * unused)639 static int ds2760_pm_notifier(struct notifier_block *notifier,
640 			      unsigned long pm_event,
641 			      void *unused)
642 {
643 	struct ds2760_device_info *di =
644 		container_of(notifier, struct ds2760_device_info, pm_notifier);
645 
646 	switch (pm_event) {
647 	case PM_HIBERNATION_PREPARE:
648 	case PM_SUSPEND_PREPARE:
649 		di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
650 		break;
651 
652 	case PM_POST_RESTORE:
653 	case PM_POST_HIBERNATION:
654 	case PM_POST_SUSPEND:
655 		di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
656 		power_supply_changed(di->bat);
657 		mod_delayed_work(di->monitor_wqueue, &di->monitor_work, HZ);
658 
659 		break;
660 
661 	case PM_RESTORE_PREPARE:
662 	default:
663 		break;
664 	}
665 
666 	return NOTIFY_DONE;
667 }
668 
w1_ds2760_add_slave(struct w1_slave * sl)669 static int w1_ds2760_add_slave(struct w1_slave *sl)
670 {
671 	struct power_supply_config psy_cfg = {};
672 	struct ds2760_device_info *di;
673 	struct device *dev = &sl->dev;
674 	int retval = 0;
675 	char name[32];
676 	char status;
677 
678 	di = devm_kzalloc(dev, sizeof(*di), GFP_KERNEL);
679 	if (!di) {
680 		retval = -ENOMEM;
681 		goto di_alloc_failed;
682 	}
683 
684 	snprintf(name, sizeof(name), "ds2760-battery.%d", dev->id);
685 
686 	di->dev				= dev;
687 	di->bat_desc.name		= name;
688 	di->bat_desc.type		= POWER_SUPPLY_TYPE_BATTERY;
689 	di->bat_desc.properties		= ds2760_battery_props;
690 	di->bat_desc.num_properties	= ARRAY_SIZE(ds2760_battery_props);
691 	di->bat_desc.get_property	= ds2760_battery_get_property;
692 	di->bat_desc.set_property	= ds2760_battery_set_property;
693 	di->bat_desc.property_is_writeable =
694 				  ds2760_battery_property_is_writeable;
695 	di->bat_desc.set_charged	= ds2760_battery_set_charged;
696 	di->bat_desc.external_power_changed =
697 				  ds2760_battery_external_power_changed;
698 
699 	psy_cfg.drv_data = di;
700 
701 	if (dev->of_node) {
702 		u32 tmp;
703 
704 		psy_cfg.of_node = dev->of_node;
705 
706 		if (!of_property_read_bool(dev->of_node, "maxim,pmod-enabled"))
707 			pmod_enabled = true;
708 
709 		if (!of_property_read_u32(dev->of_node,
710 					  "maxim,cache-time-ms", &tmp))
711 			cache_time = tmp;
712 
713 		if (!of_property_read_u32(dev->of_node,
714 					  "rated-capacity-microamp-hours",
715 					  &tmp))
716 			rated_capacity = tmp / 10; /* property is in mAh */
717 	}
718 
719 	di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
720 
721 	sl->family_data = di;
722 
723 	/* enable sleep mode feature */
724 	ds2760_battery_read_status(di);
725 	status = di->raw[DS2760_STATUS_REG];
726 	if (pmod_enabled)
727 		status |= DS2760_STATUS_PMOD;
728 	else
729 		status &= ~DS2760_STATUS_PMOD;
730 
731 	ds2760_battery_write_status(di, status);
732 
733 	/* set rated capacity from module param or device tree */
734 	if (rated_capacity)
735 		ds2760_battery_write_rated_capacity(di, rated_capacity);
736 
737 	/* set current accumulator if given as parameter.
738 	 * this should only be done for bootstrapping the value */
739 	if (current_accum)
740 		ds2760_battery_set_current_accum(di, current_accum);
741 
742 	di->bat = power_supply_register(dev, &di->bat_desc, &psy_cfg);
743 	if (IS_ERR(di->bat)) {
744 		dev_err(di->dev, "failed to register battery\n");
745 		retval = PTR_ERR(di->bat);
746 		goto batt_failed;
747 	}
748 
749 	INIT_DELAYED_WORK(&di->monitor_work, ds2760_battery_work);
750 	INIT_DELAYED_WORK(&di->set_charged_work,
751 			  ds2760_battery_set_charged_work);
752 	di->monitor_wqueue = alloc_ordered_workqueue(name, WQ_MEM_RECLAIM);
753 	if (!di->monitor_wqueue) {
754 		retval = -ESRCH;
755 		goto workqueue_failed;
756 	}
757 	queue_delayed_work(di->monitor_wqueue, &di->monitor_work, HZ * 1);
758 
759 	di->pm_notifier.notifier_call = ds2760_pm_notifier;
760 	register_pm_notifier(&di->pm_notifier);
761 
762 	goto success;
763 
764 workqueue_failed:
765 	power_supply_unregister(di->bat);
766 batt_failed:
767 di_alloc_failed:
768 success:
769 	return retval;
770 }
771 
w1_ds2760_remove_slave(struct w1_slave * sl)772 static void w1_ds2760_remove_slave(struct w1_slave *sl)
773 {
774 	struct ds2760_device_info *di = sl->family_data;
775 
776 	unregister_pm_notifier(&di->pm_notifier);
777 	cancel_delayed_work_sync(&di->monitor_work);
778 	cancel_delayed_work_sync(&di->set_charged_work);
779 	destroy_workqueue(di->monitor_wqueue);
780 	power_supply_unregister(di->bat);
781 }
782 
783 #ifdef CONFIG_OF
784 static const struct of_device_id w1_ds2760_of_ids[] = {
785 	{ .compatible = "maxim,ds2760" },
786 	{}
787 };
788 #endif
789 
790 static const struct w1_family_ops w1_ds2760_fops = {
791 	.add_slave	= w1_ds2760_add_slave,
792 	.remove_slave	= w1_ds2760_remove_slave,
793 	.groups		= w1_ds2760_groups,
794 };
795 
796 static struct w1_family w1_ds2760_family = {
797 	.fid		= W1_FAMILY_DS2760,
798 	.fops		= &w1_ds2760_fops,
799 	.of_match_table	= of_match_ptr(w1_ds2760_of_ids),
800 };
801 module_w1_family(w1_ds2760_family);
802 
803 MODULE_AUTHOR("Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>, "
804 	      "Matt Reimer <mreimer@vpop.net>, "
805 	      "Anton Vorontsov <cbou@mail.ru>");
806 MODULE_DESCRIPTION("1-wire Driver Dallas 2760 battery monitor chip");
807 MODULE_LICENSE("GPL");
808 MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS2760));
809