1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  *  Driver for Conexant CX24113/CX24128 Tuner (Satellite)
4  *
5  *  Copyright (C) 2007-8 Patrick Boettcher <pb@linuxtv.org>
6  *
7  *  Developed for BBTI / Technisat
8  */
9 
10 #include <linux/slab.h>
11 #include <linux/kernel.h>
12 #include <linux/module.h>
13 #include <linux/init.h>
14 
15 #include <media/dvb_frontend.h>
16 #include "cx24113.h"
17 
18 static int debug;
19 
20 #define cx_info(args...) do { printk(KERN_INFO "CX24113: " args); } while (0)
21 #define cx_err(args...)  do { printk(KERN_ERR  "CX24113: " args); } while (0)
22 
23 #define dprintk(args...) \
24 	do { \
25 		if (debug) { \
26 			printk(KERN_DEBUG "CX24113: %s: ", __func__); \
27 			printk(args); \
28 		} \
29 	} while (0)
30 
31 struct cx24113_state {
32 	struct i2c_adapter *i2c;
33 	const struct cx24113_config *config;
34 
35 #define REV_CX24113 0x23
36 	u8 rev;
37 	u8 ver;
38 
39 	u8 icp_mode:1;
40 
41 #define ICP_LEVEL1 0
42 #define ICP_LEVEL2 1
43 #define ICP_LEVEL3 2
44 #define ICP_LEVEL4 3
45 	u8 icp_man:2;
46 	u8 icp_auto_low:2;
47 	u8 icp_auto_mlow:2;
48 	u8 icp_auto_mhi:2;
49 	u8 icp_auto_hi:2;
50 	u8 icp_dig;
51 
52 #define LNA_MIN_GAIN 0
53 #define LNA_MID_GAIN 1
54 #define LNA_MAX_GAIN 2
55 	u8 lna_gain:2;
56 
57 	u8 acp_on:1;
58 
59 	u8 vco_mode:2;
60 	u8 vco_shift:1;
61 #define VCOBANDSEL_6 0x80
62 #define VCOBANDSEL_5 0x01
63 #define VCOBANDSEL_4 0x02
64 #define VCOBANDSEL_3 0x04
65 #define VCOBANDSEL_2 0x08
66 #define VCOBANDSEL_1 0x10
67 	u8 vco_band;
68 
69 #define VCODIV4 4
70 #define VCODIV2 2
71 	u8 vcodiv;
72 
73 	u8 bs_delay:4;
74 	u16 bs_freqcnt:13;
75 	u16 bs_rdiv;
76 	u8 prescaler_mode:1;
77 
78 	u8 rfvga_bias_ctrl;
79 
80 	s16 tuner_gain_thres;
81 	u8  gain_level;
82 
83 	u32 frequency;
84 
85 	u8 refdiv;
86 
87 	u8 Fwindow_enabled;
88 };
89 
cx24113_writereg(struct cx24113_state * state,int reg,int data)90 static int cx24113_writereg(struct cx24113_state *state, int reg, int data)
91 {
92 	u8 buf[] = { reg, data };
93 	struct i2c_msg msg = { .addr = state->config->i2c_addr,
94 		.flags = 0, .buf = buf, .len = 2 };
95 	int err = i2c_transfer(state->i2c, &msg, 1);
96 	if (err != 1) {
97 		printk(KERN_DEBUG "%s: writereg error(err == %i, reg == 0x%02x, data == 0x%02x)\n",
98 		       __func__, err, reg, data);
99 		return err;
100 	}
101 
102 	return 0;
103 }
104 
cx24113_readreg(struct cx24113_state * state,u8 reg)105 static int cx24113_readreg(struct cx24113_state *state, u8 reg)
106 {
107 	int ret;
108 	u8 b;
109 	struct i2c_msg msg[] = {
110 		{ .addr = state->config->i2c_addr,
111 			.flags = 0, .buf = &reg, .len = 1 },
112 		{ .addr = state->config->i2c_addr,
113 			.flags = I2C_M_RD, .buf = &b, .len = 1 }
114 	};
115 
116 	ret = i2c_transfer(state->i2c, msg, 2);
117 
118 	if (ret != 2) {
119 		printk(KERN_DEBUG "%s: reg=0x%x (error=%d)\n",
120 			__func__, reg, ret);
121 		return ret;
122 	}
123 
124 	return b;
125 }
126 
cx24113_set_parameters(struct cx24113_state * state)127 static void cx24113_set_parameters(struct cx24113_state *state)
128 {
129 	u8 r;
130 
131 	r = cx24113_readreg(state, 0x10) & 0x82;
132 	r |= state->icp_mode;
133 	r |= state->icp_man << 4;
134 	r |= state->icp_dig << 2;
135 	r |= state->prescaler_mode << 5;
136 	cx24113_writereg(state, 0x10, r);
137 
138 	r = (state->icp_auto_low  << 0) | (state->icp_auto_mlow << 2)
139 		| (state->icp_auto_mhi << 4) | (state->icp_auto_hi << 6);
140 	cx24113_writereg(state, 0x11, r);
141 
142 	if (state->rev == REV_CX24113) {
143 		r = cx24113_readreg(state, 0x20) & 0xec;
144 		r |= state->lna_gain;
145 		r |= state->rfvga_bias_ctrl << 4;
146 		cx24113_writereg(state, 0x20, r);
147 	}
148 
149 	r = cx24113_readreg(state, 0x12) & 0x03;
150 	r |= state->acp_on << 2;
151 	r |= state->bs_delay << 4;
152 	cx24113_writereg(state, 0x12, r);
153 
154 	r = cx24113_readreg(state, 0x18) & 0x40;
155 	r |= state->vco_shift;
156 	if (state->vco_band == VCOBANDSEL_6)
157 		r |= (1 << 7);
158 	else
159 		r |= (state->vco_band << 1);
160 	cx24113_writereg(state, 0x18, r);
161 
162 	r  = cx24113_readreg(state, 0x14) & 0x20;
163 	r |= (state->vco_mode << 6) | ((state->bs_freqcnt >> 8) & 0x1f);
164 	cx24113_writereg(state, 0x14, r);
165 	cx24113_writereg(state, 0x15, (state->bs_freqcnt        & 0xff));
166 
167 	cx24113_writereg(state, 0x16, (state->bs_rdiv >> 4) & 0xff);
168 	r = (cx24113_readreg(state, 0x17) & 0x0f) |
169 		((state->bs_rdiv & 0x0f) << 4);
170 	cx24113_writereg(state, 0x17, r);
171 }
172 
173 #define VGA_0 0x00
174 #define VGA_1 0x04
175 #define VGA_2 0x02
176 #define VGA_3 0x06
177 #define VGA_4 0x01
178 #define VGA_5 0x05
179 #define VGA_6 0x03
180 #define VGA_7 0x07
181 
182 #define RFVGA_0 0x00
183 #define RFVGA_1 0x01
184 #define RFVGA_2 0x02
185 #define RFVGA_3 0x03
186 
cx24113_set_gain_settings(struct cx24113_state * state,s16 power_estimation)187 static int cx24113_set_gain_settings(struct cx24113_state *state,
188 		s16 power_estimation)
189 {
190 	u8 ampout = cx24113_readreg(state, 0x1d) & 0xf0,
191 	   vga    = cx24113_readreg(state, 0x1f) & 0x3f,
192 	   rfvga  = cx24113_readreg(state, 0x20) & 0xf3;
193 	u8 gain_level = power_estimation >= state->tuner_gain_thres;
194 
195 	dprintk("power estimation: %d, thres: %d, gain_level: %d/%d\n",
196 			power_estimation, state->tuner_gain_thres,
197 			state->gain_level, gain_level);
198 
199 	if (gain_level == state->gain_level)
200 		return 0; /* nothing to be done */
201 
202 	ampout |= 0xf;
203 
204 	if (gain_level) {
205 		rfvga |= RFVGA_0 << 2;
206 		vga   |= (VGA_7 << 3) | VGA_7;
207 	} else {
208 		rfvga |= RFVGA_2 << 2;
209 		vga  |= (VGA_6 << 3) | VGA_2;
210 	}
211 	state->gain_level = gain_level;
212 
213 	cx24113_writereg(state, 0x1d, ampout);
214 	cx24113_writereg(state, 0x1f, vga);
215 	cx24113_writereg(state, 0x20, rfvga);
216 
217 	return 1; /* did something */
218 }
219 
cx24113_set_Fref(struct cx24113_state * state,u8 high)220 static int cx24113_set_Fref(struct cx24113_state *state, u8 high)
221 {
222 	u8 xtal = cx24113_readreg(state, 0x02);
223 	if (state->rev == 0x43 && state->vcodiv == VCODIV4)
224 		high = 1;
225 
226 	xtal &= ~0x2;
227 	if (high)
228 		xtal |= high << 1;
229 	return cx24113_writereg(state, 0x02, xtal);
230 }
231 
cx24113_enable(struct cx24113_state * state,u8 enable)232 static int cx24113_enable(struct cx24113_state *state, u8 enable)
233 {
234 	u8 r21 = (cx24113_readreg(state, 0x21) & 0xc0) | enable;
235 	if (state->rev == REV_CX24113)
236 		r21 |= (1 << 1);
237 	return cx24113_writereg(state, 0x21, r21);
238 }
239 
cx24113_set_bandwidth(struct cx24113_state * state,u32 bandwidth_khz)240 static int cx24113_set_bandwidth(struct cx24113_state *state, u32 bandwidth_khz)
241 {
242 	u8 r;
243 
244 	if (bandwidth_khz <= 19000)
245 		r = 0x03 << 6;
246 	else if (bandwidth_khz <= 25000)
247 		r = 0x02 << 6;
248 	else
249 		r = 0x01 << 6;
250 
251 	dprintk("bandwidth to be set: %d\n", bandwidth_khz);
252 	bandwidth_khz *= 10;
253 	bandwidth_khz -= 10000;
254 	bandwidth_khz /= 1000;
255 	bandwidth_khz += 5;
256 	bandwidth_khz /= 10;
257 
258 	dprintk("bandwidth: %d %d\n", r >> 6, bandwidth_khz);
259 
260 	r |= bandwidth_khz & 0x3f;
261 
262 	return cx24113_writereg(state, 0x1e, r);
263 }
264 
cx24113_set_clk_inversion(struct cx24113_state * state,u8 on)265 static int cx24113_set_clk_inversion(struct cx24113_state *state, u8 on)
266 {
267 	u8 r = (cx24113_readreg(state, 0x10) & 0x7f) | ((on & 0x1) << 7);
268 	return cx24113_writereg(state, 0x10, r);
269 }
270 
cx24113_get_status(struct dvb_frontend * fe,u32 * status)271 static int cx24113_get_status(struct dvb_frontend *fe, u32 *status)
272 {
273 	struct cx24113_state *state = fe->tuner_priv;
274 	u8 r = (cx24113_readreg(state, 0x10) & 0x02) >> 1;
275 	if (r)
276 		*status |= TUNER_STATUS_LOCKED;
277 	dprintk("PLL locked: %d\n", r);
278 	return 0;
279 }
280 
cx24113_set_ref_div(struct cx24113_state * state,u8 refdiv)281 static u8 cx24113_set_ref_div(struct cx24113_state *state, u8 refdiv)
282 {
283 	if (state->rev == 0x43 && state->vcodiv == VCODIV4)
284 		refdiv = 2;
285 	return state->refdiv = refdiv;
286 }
287 
cx24113_calc_pll_nf(struct cx24113_state * state,u16 * n,s32 * f)288 static void cx24113_calc_pll_nf(struct cx24113_state *state, u16 *n, s32 *f)
289 {
290 	s32 N;
291 	s64 F;
292 	u64 dividend;
293 	u8 R, r;
294 	u8 vcodiv;
295 	u8 factor;
296 	s32 freq_hz = state->frequency * 1000;
297 
298 	if (state->config->xtal_khz < 20000)
299 		factor = 1;
300 	else
301 		factor = 2;
302 
303 	if (state->rev == REV_CX24113) {
304 		if (state->frequency >= 1100000)
305 			vcodiv = VCODIV2;
306 		else
307 			vcodiv = VCODIV4;
308 	} else {
309 		if (state->frequency >= 1165000)
310 			vcodiv = VCODIV2;
311 		else
312 			vcodiv = VCODIV4;
313 	}
314 	state->vcodiv = vcodiv;
315 
316 	dprintk("calculating N/F for %dHz with vcodiv %d\n", freq_hz, vcodiv);
317 	R = 0;
318 	do {
319 		R = cx24113_set_ref_div(state, R + 1);
320 
321 		/* calculate tuner PLL settings: */
322 		N =  (freq_hz / 100 * vcodiv) * R;
323 		N /= (state->config->xtal_khz) * factor * 2;
324 		N += 5;     /* For round up. */
325 		N /= 10;
326 		N -= 32;
327 	} while (N < 6 && R < 3);
328 
329 	if (N < 6) {
330 		cx_err("strange frequency: N < 6\n");
331 		return;
332 	}
333 	F = freq_hz;
334 	F *= (u64) (R * vcodiv * 262144);
335 	dprintk("1 N: %d, F: %lld, R: %d\n", N, (long long)F, R);
336 	/* do_div needs an u64 as first argument */
337 	dividend = F;
338 	do_div(dividend, state->config->xtal_khz * 1000 * factor * 2);
339 	F = dividend;
340 	dprintk("2 N: %d, F: %lld, R: %d\n", N, (long long)F, R);
341 	F -= (N + 32) * 262144;
342 
343 	dprintk("3 N: %d, F: %lld, R: %d\n", N, (long long)F, R);
344 
345 	if (state->Fwindow_enabled) {
346 		if (F > (262144 / 2 - 1638))
347 			F = 262144 / 2 - 1638;
348 		if (F < (-262144 / 2 + 1638))
349 			F = -262144 / 2 + 1638;
350 		if ((F < 3277 && F > 0) || (F > -3277 && F < 0)) {
351 			F = 0;
352 			r = cx24113_readreg(state, 0x10);
353 			cx24113_writereg(state, 0x10, r | (1 << 6));
354 		}
355 	}
356 	dprintk("4 N: %d, F: %lld, R: %d\n", N, (long long)F, R);
357 
358 	*n = (u16) N;
359 	*f = (s32) F;
360 }
361 
362 
cx24113_set_nfr(struct cx24113_state * state,u16 n,s32 f,u8 r)363 static void cx24113_set_nfr(struct cx24113_state *state, u16 n, s32 f, u8 r)
364 {
365 	u8 reg;
366 	cx24113_writereg(state, 0x19, (n >> 1) & 0xff);
367 
368 	reg = ((n & 0x1) << 7) | ((f >> 11) & 0x7f);
369 	cx24113_writereg(state, 0x1a, reg);
370 
371 	cx24113_writereg(state, 0x1b, (f >> 3) & 0xff);
372 
373 	reg = cx24113_readreg(state, 0x1c) & 0x1f;
374 	cx24113_writereg(state, 0x1c, reg | ((f & 0x7) << 5));
375 
376 	cx24113_set_Fref(state, r - 1);
377 }
378 
cx24113_set_frequency(struct cx24113_state * state,u32 frequency)379 static int cx24113_set_frequency(struct cx24113_state *state, u32 frequency)
380 {
381 	u8 r;
382 	u16 n = 6;
383 	s32 f = 0;
384 
385 	r = cx24113_readreg(state, 0x14);
386 	cx24113_writereg(state, 0x14, r & 0x3f);
387 
388 	r = cx24113_readreg(state, 0x10);
389 	cx24113_writereg(state, 0x10, r & 0xbf);
390 
391 	state->frequency = frequency;
392 
393 	dprintk("tuning to frequency: %d\n", frequency);
394 
395 	cx24113_calc_pll_nf(state, &n, &f);
396 	cx24113_set_nfr(state, n, f, state->refdiv);
397 
398 	r = cx24113_readreg(state, 0x18) & 0xbf;
399 	if (state->vcodiv != VCODIV2)
400 		r |= 1 << 6;
401 	cx24113_writereg(state, 0x18, r);
402 
403 	/* The need for this sleep is not clear. But helps in some cases */
404 	msleep(5);
405 
406 	r = cx24113_readreg(state, 0x1c) & 0xef;
407 	cx24113_writereg(state, 0x1c, r | (1 << 4));
408 	return 0;
409 }
410 
cx24113_init(struct dvb_frontend * fe)411 static int cx24113_init(struct dvb_frontend *fe)
412 {
413 	struct cx24113_state *state = fe->tuner_priv;
414 	int ret;
415 
416 	state->tuner_gain_thres = -50;
417 	state->gain_level = 255; /* to force a gain-setting initialization */
418 	state->icp_mode = 0;
419 
420 	if (state->config->xtal_khz < 11000) {
421 		state->icp_auto_hi  = ICP_LEVEL4;
422 		state->icp_auto_mhi  = ICP_LEVEL4;
423 		state->icp_auto_mlow = ICP_LEVEL3;
424 		state->icp_auto_low = ICP_LEVEL3;
425 	} else {
426 		state->icp_auto_hi  = ICP_LEVEL4;
427 		state->icp_auto_mhi  = ICP_LEVEL4;
428 		state->icp_auto_mlow = ICP_LEVEL3;
429 		state->icp_auto_low = ICP_LEVEL2;
430 	}
431 
432 	state->icp_dig = ICP_LEVEL3;
433 	state->icp_man = ICP_LEVEL1;
434 	state->acp_on  = 1;
435 	state->vco_mode = 0;
436 	state->vco_shift = 0;
437 	state->vco_band = VCOBANDSEL_1;
438 	state->bs_delay = 8;
439 	state->bs_freqcnt = 0x0fff;
440 	state->bs_rdiv = 0x0fff;
441 	state->prescaler_mode = 0;
442 	state->lna_gain = LNA_MAX_GAIN;
443 	state->rfvga_bias_ctrl = 1;
444 	state->Fwindow_enabled = 1;
445 
446 	cx24113_set_Fref(state, 0);
447 	cx24113_enable(state, 0x3d);
448 	cx24113_set_parameters(state);
449 
450 	cx24113_set_gain_settings(state, -30);
451 
452 	cx24113_set_bandwidth(state, 18025);
453 	cx24113_set_clk_inversion(state, 1);
454 
455 	if (state->config->xtal_khz >= 40000)
456 		ret = cx24113_writereg(state, 0x02,
457 			(cx24113_readreg(state, 0x02) & 0xfb) | (1 << 2));
458 	else
459 		ret = cx24113_writereg(state, 0x02,
460 			(cx24113_readreg(state, 0x02) & 0xfb) | (0 << 2));
461 
462 	return ret;
463 }
464 
cx24113_set_params(struct dvb_frontend * fe)465 static int cx24113_set_params(struct dvb_frontend *fe)
466 {
467 	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
468 	struct cx24113_state *state = fe->tuner_priv;
469 	/* for a ROLL-OFF factor of 0.35, 0.2: 600, 0.25: 625 */
470 	u32 roll_off = 675;
471 	u32 bw;
472 
473 	bw  = ((c->symbol_rate/100) * roll_off) / 1000;
474 	bw += (10000000/100) + 5;
475 	bw /= 10;
476 	bw += 1000;
477 	cx24113_set_bandwidth(state, bw);
478 
479 	cx24113_set_frequency(state, c->frequency);
480 	msleep(5);
481 	return cx24113_get_status(fe, &bw);
482 }
483 
484 static s8 cx24113_agc_table[2][10] = {
485 	{-54, -41, -35, -30, -25, -21, -16, -10,  -6,  -2},
486 	{-39, -35, -30, -25, -19, -15, -11,  -5,   1,   9},
487 };
488 
cx24113_agc_callback(struct dvb_frontend * fe)489 void cx24113_agc_callback(struct dvb_frontend *fe)
490 {
491 	struct cx24113_state *state = fe->tuner_priv;
492 	s16 s, i;
493 	if (!fe->ops.read_signal_strength)
494 		return;
495 
496 	do {
497 		/* this only works with the current CX24123 implementation */
498 		fe->ops.read_signal_strength(fe, (u16 *) &s);
499 		s >>= 8;
500 		dprintk("signal strength: %d\n", s);
501 		for (i = 0; i < sizeof(cx24113_agc_table[0]); i++)
502 			if (cx24113_agc_table[state->gain_level][i] > s)
503 				break;
504 		s = -25 - i*5;
505 	} while (cx24113_set_gain_settings(state, s));
506 }
507 EXPORT_SYMBOL(cx24113_agc_callback);
508 
cx24113_get_frequency(struct dvb_frontend * fe,u32 * frequency)509 static int cx24113_get_frequency(struct dvb_frontend *fe, u32 *frequency)
510 {
511 	struct cx24113_state *state = fe->tuner_priv;
512 	*frequency = state->frequency;
513 	return 0;
514 }
515 
cx24113_release(struct dvb_frontend * fe)516 static void cx24113_release(struct dvb_frontend *fe)
517 {
518 	struct cx24113_state *state = fe->tuner_priv;
519 	dprintk("\n");
520 	fe->tuner_priv = NULL;
521 	kfree(state);
522 }
523 
524 static const struct dvb_tuner_ops cx24113_tuner_ops = {
525 	.info = {
526 		.name              = "Conexant CX24113",
527 		.frequency_min_hz  =  950 * MHz,
528 		.frequency_max_hz  = 2150 * MHz,
529 		.frequency_step_hz =  125 * kHz,
530 	},
531 
532 	.release       = cx24113_release,
533 
534 	.init          = cx24113_init,
535 
536 	.set_params    = cx24113_set_params,
537 	.get_frequency = cx24113_get_frequency,
538 	.get_status    = cx24113_get_status,
539 };
540 
cx24113_attach(struct dvb_frontend * fe,const struct cx24113_config * config,struct i2c_adapter * i2c)541 struct dvb_frontend *cx24113_attach(struct dvb_frontend *fe,
542 		const struct cx24113_config *config, struct i2c_adapter *i2c)
543 {
544 	/* allocate memory for the internal state */
545 	struct cx24113_state *state = kzalloc(sizeof(*state), GFP_KERNEL);
546 	int rc;
547 
548 	if (!state)
549 		return NULL;
550 
551 	/* setup the state */
552 	state->config = config;
553 	state->i2c = i2c;
554 
555 	cx_info("trying to detect myself\n");
556 
557 	/* making a dummy read, because of some expected troubles
558 	 * after power on */
559 	cx24113_readreg(state, 0x00);
560 
561 	rc = cx24113_readreg(state, 0x00);
562 	if (rc < 0) {
563 		cx_info("CX24113 not found.\n");
564 		goto error;
565 	}
566 	state->rev = rc;
567 
568 	switch (rc) {
569 	case 0x43:
570 		cx_info("detected CX24113 variant\n");
571 		break;
572 	case REV_CX24113:
573 		cx_info("successfully detected\n");
574 		break;
575 	default:
576 		cx_err("unsupported device id: %x\n", state->rev);
577 		goto error;
578 	}
579 	state->ver = cx24113_readreg(state, 0x01);
580 	cx_info("version: %x\n", state->ver);
581 
582 	/* create dvb_frontend */
583 	memcpy(&fe->ops.tuner_ops, &cx24113_tuner_ops,
584 			sizeof(struct dvb_tuner_ops));
585 	fe->tuner_priv = state;
586 	return fe;
587 
588 error:
589 	kfree(state);
590 
591 	return NULL;
592 }
593 EXPORT_SYMBOL_GPL(cx24113_attach);
594 
595 module_param(debug, int, 0644);
596 MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)");
597 
598 MODULE_AUTHOR("Patrick Boettcher <pb@linuxtv.org>");
599 MODULE_DESCRIPTION("DVB Frontend module for Conexant CX24113/CX24128hardware");
600 MODULE_LICENSE("GPL");
601 
602