1 // SPDX-License-Identifier: GPL-2.0-only
2 /* linux/drivers/char/pc8736x_gpio.c
3
4 National Semiconductor PC8736x GPIO driver. Allows a user space
5 process to play with the GPIO pins.
6
7 Copyright (c) 2005,2006 Jim Cromie <jim.cromie@gmail.com>
8
9 adapted from linux/drivers/char/scx200_gpio.c
10 Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>,
11 */
12
13 #include <linux/fs.h>
14 #include <linux/module.h>
15 #include <linux/errno.h>
16 #include <linux/kernel.h>
17 #include <linux/init.h>
18 #include <linux/cdev.h>
19 #include <linux/io.h>
20 #include <linux/ioport.h>
21 #include <linux/mutex.h>
22 #include <linux/nsc_gpio.h>
23 #include <linux/platform_device.h>
24 #include <linux/uaccess.h>
25
26 #define DEVNAME "pc8736x_gpio"
27
28 MODULE_AUTHOR("Jim Cromie <jim.cromie@gmail.com>");
29 MODULE_DESCRIPTION("NatSemi/Winbond PC-8736x GPIO Pin Driver");
30 MODULE_LICENSE("GPL");
31
32 static int major; /* default to dynamic major */
33 module_param(major, int, 0);
34 MODULE_PARM_DESC(major, "Major device number");
35
36 static DEFINE_MUTEX(pc8736x_gpio_config_lock);
37 static unsigned pc8736x_gpio_base;
38 static u8 pc8736x_gpio_shadow[4];
39
40 #define SIO_BASE1 0x2E /* 1st command-reg to check */
41 #define SIO_BASE2 0x4E /* alt command-reg to check */
42
43 #define SIO_SID 0x20 /* SuperI/O ID Register */
44 #define SIO_SID_PC87365 0xe5 /* Expected value in ID Register for PC87365 */
45 #define SIO_SID_PC87366 0xe9 /* Expected value in ID Register for PC87366 */
46
47 #define SIO_CF1 0x21 /* chip config, bit0 is chip enable */
48
49 #define PC8736X_GPIO_RANGE 16 /* ioaddr range */
50 #define PC8736X_GPIO_CT 32 /* minors matching 4 8 bit ports */
51
52 #define SIO_UNIT_SEL 0x7 /* unit select reg */
53 #define SIO_UNIT_ACT 0x30 /* unit enable */
54 #define SIO_GPIO_UNIT 0x7 /* unit number of GPIO */
55 #define SIO_VLM_UNIT 0x0D
56 #define SIO_TMS_UNIT 0x0E
57
58 /* config-space addrs to read/write each unit's runtime addr */
59 #define SIO_BASE_HADDR 0x60
60 #define SIO_BASE_LADDR 0x61
61
62 /* GPIO config-space pin-control addresses */
63 #define SIO_GPIO_PIN_SELECT 0xF0
64 #define SIO_GPIO_PIN_CONFIG 0xF1
65 #define SIO_GPIO_PIN_EVENT 0xF2
66
67 static unsigned char superio_cmd = 0;
68 static unsigned char selected_device = 0xFF; /* bogus start val */
69
70 /* GPIO port runtime access, functionality */
71 static int port_offset[] = { 0, 4, 8, 10 }; /* non-uniform offsets ! */
72 /* static int event_capable[] = { 1, 1, 0, 0 }; ports 2,3 are hobbled */
73
74 #define PORT_OUT 0
75 #define PORT_IN 1
76 #define PORT_EVT_EN 2
77 #define PORT_EVT_STST 3
78
79 static struct platform_device *pdev; /* use in dev_*() */
80
superio_outb(int addr,int val)81 static inline void superio_outb(int addr, int val)
82 {
83 outb_p(addr, superio_cmd);
84 outb_p(val, superio_cmd + 1);
85 }
86
superio_inb(int addr)87 static inline int superio_inb(int addr)
88 {
89 outb_p(addr, superio_cmd);
90 return inb_p(superio_cmd + 1);
91 }
92
pc8736x_superio_present(void)93 static int pc8736x_superio_present(void)
94 {
95 int id;
96
97 /* try the 2 possible values, read a hardware reg to verify */
98 superio_cmd = SIO_BASE1;
99 id = superio_inb(SIO_SID);
100 if (id == SIO_SID_PC87365 || id == SIO_SID_PC87366)
101 return superio_cmd;
102
103 superio_cmd = SIO_BASE2;
104 id = superio_inb(SIO_SID);
105 if (id == SIO_SID_PC87365 || id == SIO_SID_PC87366)
106 return superio_cmd;
107
108 return 0;
109 }
110
device_select(unsigned devldn)111 static void device_select(unsigned devldn)
112 {
113 superio_outb(SIO_UNIT_SEL, devldn);
114 selected_device = devldn;
115 }
116
select_pin(unsigned iminor)117 static void select_pin(unsigned iminor)
118 {
119 /* select GPIO port/pin from device minor number */
120 device_select(SIO_GPIO_UNIT);
121 superio_outb(SIO_GPIO_PIN_SELECT,
122 ((iminor << 1) & 0xF0) | (iminor & 0x7));
123 }
124
pc8736x_gpio_configure_fn(unsigned index,u32 mask,u32 bits,u32 func_slct)125 static inline u32 pc8736x_gpio_configure_fn(unsigned index, u32 mask, u32 bits,
126 u32 func_slct)
127 {
128 u32 config, new_config;
129
130 mutex_lock(&pc8736x_gpio_config_lock);
131
132 device_select(SIO_GPIO_UNIT);
133 select_pin(index);
134
135 /* read current config value */
136 config = superio_inb(func_slct);
137
138 /* set new config */
139 new_config = (config & mask) | bits;
140 superio_outb(func_slct, new_config);
141
142 mutex_unlock(&pc8736x_gpio_config_lock);
143
144 return config;
145 }
146
pc8736x_gpio_configure(unsigned index,u32 mask,u32 bits)147 static u32 pc8736x_gpio_configure(unsigned index, u32 mask, u32 bits)
148 {
149 return pc8736x_gpio_configure_fn(index, mask, bits,
150 SIO_GPIO_PIN_CONFIG);
151 }
152
pc8736x_gpio_get(unsigned minor)153 static int pc8736x_gpio_get(unsigned minor)
154 {
155 int port, bit, val;
156
157 port = minor >> 3;
158 bit = minor & 7;
159 val = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_IN);
160 val >>= bit;
161 val &= 1;
162
163 dev_dbg(&pdev->dev, "_gpio_get(%d from %x bit %d) == val %d\n",
164 minor, pc8736x_gpio_base + port_offset[port] + PORT_IN, bit,
165 val);
166
167 return val;
168 }
169
pc8736x_gpio_set(unsigned minor,int val)170 static void pc8736x_gpio_set(unsigned minor, int val)
171 {
172 int port, bit, curval;
173
174 minor &= 0x1f;
175 port = minor >> 3;
176 bit = minor & 7;
177 curval = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_OUT);
178
179 dev_dbg(&pdev->dev, "addr:%x cur:%x bit-pos:%d cur-bit:%x + new:%d -> bit-new:%d\n",
180 pc8736x_gpio_base + port_offset[port] + PORT_OUT,
181 curval, bit, (curval & ~(1 << bit)), val, (val << bit));
182
183 val = (curval & ~(1 << bit)) | (val << bit);
184
185 dev_dbg(&pdev->dev, "gpio_set(minor:%d port:%d bit:%d)"
186 " %2x -> %2x\n", minor, port, bit, curval, val);
187
188 outb_p(val, pc8736x_gpio_base + port_offset[port] + PORT_OUT);
189
190 curval = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_OUT);
191 val = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_IN);
192
193 dev_dbg(&pdev->dev, "wrote %x, read: %x\n", curval, val);
194 pc8736x_gpio_shadow[port] = val;
195 }
196
pc8736x_gpio_current(unsigned minor)197 static int pc8736x_gpio_current(unsigned minor)
198 {
199 int port, bit;
200 minor &= 0x1f;
201 port = minor >> 3;
202 bit = minor & 7;
203 return ((pc8736x_gpio_shadow[port] >> bit) & 0x01);
204 }
205
pc8736x_gpio_change(unsigned index)206 static void pc8736x_gpio_change(unsigned index)
207 {
208 pc8736x_gpio_set(index, !pc8736x_gpio_current(index));
209 }
210
211 static struct nsc_gpio_ops pc8736x_gpio_ops = {
212 .owner = THIS_MODULE,
213 .gpio_config = pc8736x_gpio_configure,
214 .gpio_dump = nsc_gpio_dump,
215 .gpio_get = pc8736x_gpio_get,
216 .gpio_set = pc8736x_gpio_set,
217 .gpio_change = pc8736x_gpio_change,
218 .gpio_current = pc8736x_gpio_current
219 };
220
pc8736x_gpio_open(struct inode * inode,struct file * file)221 static int pc8736x_gpio_open(struct inode *inode, struct file *file)
222 {
223 unsigned m = iminor(inode);
224 file->private_data = &pc8736x_gpio_ops;
225
226 dev_dbg(&pdev->dev, "open %d\n", m);
227
228 if (m >= PC8736X_GPIO_CT)
229 return -EINVAL;
230 return nonseekable_open(inode, file);
231 }
232
233 static const struct file_operations pc8736x_gpio_fileops = {
234 .owner = THIS_MODULE,
235 .open = pc8736x_gpio_open,
236 .write = nsc_gpio_write,
237 .read = nsc_gpio_read,
238 .llseek = no_llseek,
239 };
240
pc8736x_init_shadow(void)241 static void __init pc8736x_init_shadow(void)
242 {
243 int port;
244
245 /* read the current values driven on the GPIO signals */
246 for (port = 0; port < 4; ++port)
247 pc8736x_gpio_shadow[port]
248 = inb_p(pc8736x_gpio_base + port_offset[port]
249 + PORT_OUT);
250
251 }
252
253 static struct cdev pc8736x_gpio_cdev;
254
pc8736x_gpio_init(void)255 static int __init pc8736x_gpio_init(void)
256 {
257 int rc;
258 dev_t devid;
259
260 pdev = platform_device_alloc(DEVNAME, 0);
261 if (!pdev)
262 return -ENOMEM;
263
264 rc = platform_device_add(pdev);
265 if (rc) {
266 rc = -ENODEV;
267 goto undo_platform_dev_alloc;
268 }
269 dev_info(&pdev->dev, "NatSemi pc8736x GPIO Driver Initializing\n");
270
271 if (!pc8736x_superio_present()) {
272 rc = -ENODEV;
273 dev_err(&pdev->dev, "no device found\n");
274 goto undo_platform_dev_add;
275 }
276 pc8736x_gpio_ops.dev = &pdev->dev;
277
278 /* Verify that chip and it's GPIO unit are both enabled.
279 My BIOS does this, so I take minimum action here
280 */
281 rc = superio_inb(SIO_CF1);
282 if (!(rc & 0x01)) {
283 rc = -ENODEV;
284 dev_err(&pdev->dev, "device not enabled\n");
285 goto undo_platform_dev_add;
286 }
287 device_select(SIO_GPIO_UNIT);
288 if (!superio_inb(SIO_UNIT_ACT)) {
289 rc = -ENODEV;
290 dev_err(&pdev->dev, "GPIO unit not enabled\n");
291 goto undo_platform_dev_add;
292 }
293
294 /* read the GPIO unit base addr that chip responds to */
295 pc8736x_gpio_base = (superio_inb(SIO_BASE_HADDR) << 8
296 | superio_inb(SIO_BASE_LADDR));
297
298 if (!request_region(pc8736x_gpio_base, PC8736X_GPIO_RANGE, DEVNAME)) {
299 rc = -ENODEV;
300 dev_err(&pdev->dev, "GPIO ioport %x busy\n",
301 pc8736x_gpio_base);
302 goto undo_platform_dev_add;
303 }
304 dev_info(&pdev->dev, "GPIO ioport %x reserved\n", pc8736x_gpio_base);
305
306 if (major) {
307 devid = MKDEV(major, 0);
308 rc = register_chrdev_region(devid, PC8736X_GPIO_CT, DEVNAME);
309 } else {
310 rc = alloc_chrdev_region(&devid, 0, PC8736X_GPIO_CT, DEVNAME);
311 major = MAJOR(devid);
312 }
313
314 if (rc < 0) {
315 dev_err(&pdev->dev, "register-chrdev failed: %d\n", rc);
316 goto undo_request_region;
317 }
318 if (!major) {
319 major = rc;
320 dev_dbg(&pdev->dev, "got dynamic major %d\n", major);
321 }
322
323 pc8736x_init_shadow();
324
325 /* ignore minor errs, and succeed */
326 cdev_init(&pc8736x_gpio_cdev, &pc8736x_gpio_fileops);
327 cdev_add(&pc8736x_gpio_cdev, devid, PC8736X_GPIO_CT);
328
329 return 0;
330
331 undo_request_region:
332 release_region(pc8736x_gpio_base, PC8736X_GPIO_RANGE);
333 undo_platform_dev_add:
334 platform_device_del(pdev);
335 undo_platform_dev_alloc:
336 platform_device_put(pdev);
337
338 return rc;
339 }
340
pc8736x_gpio_cleanup(void)341 static void __exit pc8736x_gpio_cleanup(void)
342 {
343 dev_dbg(&pdev->dev, "cleanup\n");
344
345 cdev_del(&pc8736x_gpio_cdev);
346 unregister_chrdev_region(MKDEV(major,0), PC8736X_GPIO_CT);
347 release_region(pc8736x_gpio_base, PC8736X_GPIO_RANGE);
348
349 platform_device_unregister(pdev);
350 }
351
352 module_init(pc8736x_gpio_init);
353 module_exit(pc8736x_gpio_cleanup);
354