| /openbmc/u-boot/board/technexion/tao3530/ |
| H A D | tao3530.c | 136 writel(~(GPIO31 | GPIO30 | GPIO22 | GPIO21 | in misc_init_r()
142 writel(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 | in misc_init_r()
|
| /openbmc/linux/arch/arm/mach-pxa/ |
| H A D | mfp-pxa320.h | 73 #define GPIO31_CIR_OUT MFP_CFG(GPIO31, AF5)
82 #define GPIO31_ICP_TXD MFP_CFG(GPIO31, AF1)
202 #define GPIO31_MMC1_CMD MFP_CFG_LPM(GPIO31, AF4, DRIVE_HIGH)
215 #define GPIO31_MMC2_CMD MFP_CFG_LPM(GPIO31, AF3, PULL_HIGH)
340 #define GPIO31_UART3_RXD MFP_CFG_LPM(GPIO31, AF6, FLOAT)
341 #define GPIO31_UART3_TXD MFP_CFG_LPM(GPIO31, AF2, FLOAT)
|
| H A D | mfp-pxa25x.h | 99 #define GPIO31_AC97_SYNC MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW)
107 #define GPIO31_I2S_SYNC MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW)
|
| H A D | mfp-pxa300.h | 342 #define GPIO31_UART1_RXD MFP_CFG_LPM(GPIO31, AF4, FLOAT)
351 #define GPIO31_UART1_TXD MFP_CFG_LPM(GPIO31, AF2, FLOAT)
512 #define GPIO31_UTM_PHYDATA_1 MFP_CFG(GPIO31, AF3)
539 #define GPIO31_USB_P2_6 MFP_CFG(GPIO31, AF1)
558 #define GPIO31_ULPI_DATA_OUT_1 MFP_CFG(GPIO31, AF3)
|
| H A D | mfp-pxa2xx.h | 85 #define GPIO31_GPIO MFP_CFG_IN(GPIO31, AF0)
|
| H A D | mfp-pxa27x.h | 189 #define GPIO31_AC97_SYNC MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW)
208 #define GPIO31_I2S_SYNC MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW)
341 #define GPIO31_USB_P3_6 MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW)
|
| H A D | mfp-pxa3xx.h | 43 #define GPIO31_GPIO MFP_CFG(GPIO31, AF0)
|
| /openbmc/linux/drivers/pinctrl/ |
| H A D | pinctrl-xway.c | 146 MFP_XWAY(GPIO31, GPIO, NONE, NONE, NONE),
274 MFP_XWAY(GPIO31, GPIO, EBU, PCI, MII),
297 static const unsigned danube_pins_ebu_a25[] = {GPIO31};
327 static const unsigned danube_pins_pci_req2[] = {GPIO31};
449 MFP_XWAY(GPIO31, GPIO, EBU, PCI, NONE),
499 static const unsigned xrx100_pins_ebu_a25[] = {GPIO31};
531 static const unsigned xrx100_pins_pci_req2[] = {GPIO31};
662 MFP_XWAY(GPIO31, GPIO, EBU, PCI, NONE),
727 static const unsigned xrx200_pins_ebu_a25[] = {GPIO31};
759 static const unsigned xrx200_pins_pci_req2[] = {GPIO31};
[all …]
|
| H A D | pinctrl-lantiq.h | 138 GPIO31, enumerator
|
| /openbmc/u-boot/board/ti/beagle/ |
| H A D | beagle.c | 488 writel(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 | in misc_init_r()
493 writel(~(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 | in misc_init_r()
|
| /openbmc/linux/arch/arm/boot/dts/broadcom/ |
| H A D | bcm2837-rpi-cm3-io3.dts | 50 "GPIO31",
|
| H A D | bcm2835-rpi-cm1-io1.dts | 50 "GPIO31",
|
| H A D | bcm2835-rpi-zero.dts | 63 "", /* GPIO31 */
|
| H A D | bcm2835-rpi-b.dts | 61 "GPIO31",
|
| H A D | bcm2835-rpi-b-rev2.dts | 61 "GPIO31",
|
| H A D | bcm2835-rpi-b-plus.dts | 61 "LAN_RUN", /* GPIO31 */
|
| H A D | bcm2835-rpi-a-plus.dts | 59 "", /* GPIO31 */
|
| H A D | bcm2837-rpi-zero-2-w.dts | 73 "NC", /* GPIO31 */
|
| /openbmc/u-boot/arch/arm/dts/ |
| H A D | bcm2835-rpi-b-rev2.dts | 60 "GPIO31",
|
| H A D | bcm2835-rpi-b-plus.dts | 67 "LAN_RUN", /* GPIO31 */
|
| H A D | bcm2835-rpi-a-plus.dts | 65 "NC", /* GPIO31 */
|
| /openbmc/u-boot/arch/arm/include/asm/arch-omap3/ |
| H A D | omap.h | 140 #define GPIO31 (0x1 << 31) macro
|
| /openbmc/linux/Documentation/devicetree/bindings/pinctrl/ |
| H A D | ste,abx500.txt | 161 pins = "GPIO31";
|
| /openbmc/linux/arch/arm64/boot/dts/bitmain/ |
| H A D | bm1880-sophon-edge.dts | 87 "NC"; /* GPIO31 */
|
| /openbmc/linux/arch/arm/boot/dts/ti/keystone/ |
| H A D | keystone-k2l.dtsi | 157 * GPIO_EMU_SEL[31]: 0-GPIO31, 1-EMU33
|