| /openbmc/u-boot/board/technexion/tao3530/ |
| H A D | tao3530.c | 137 GPIO15 | GPIO14 | GPIO13 | GPIO12), &gpio5_base->oe); in misc_init_r()
143 GPIO15 | GPIO14 | GPIO13 | GPIO12, &gpio5_base->setdataout); in misc_init_r()
|
| /openbmc/u-boot/board/Arcturus/ucp1020/ |
| H A D | ucp1020.h | 25 #define GPIO14 17 macro
|
| /openbmc/u-boot/board/ti/beagle/ |
| H A D | beagle.c | 489 GPIO15 | GPIO14 | GPIO13 | GPIO12, &gpio5_base->setdataout); in misc_init_r()
494 GPIO15 | GPIO14 | GPIO13 | GPIO12), &gpio5_base->oe); in misc_init_r()
|
| /openbmc/linux/drivers/pinctrl/ |
| H A D | pinctrl-xway.c | 129 MFP_XWAY(GPIO14, GPIO, EBU, SPI, CGU),
171 static const unsigned ase_pins_spi_cs3[] = {GPIO14};
179 static const unsigned ase_pins_clkout2[] = {GPIO14};
257 MFP_XWAY(GPIO14, GPIO, CGU, CBUS, MII),
432 MFP_XWAY(GPIO14, GPIO, CGU, NONE, NONE),
645 MFP_XWAY(GPIO14, GPIO, CGU, CBUS, USIF),
706 static const unsigned xrx200_pins_usif_spi_cs2[] = {GPIO14};
901 MFP_XWAY(GPIO14, GPIO, CGU, USIF, EPHY),
968 static const unsigned xrx300_pins_usif_spi_cs0[] = {GPIO14};
978 static const unsigned xrx300_pins_ephy1_led0[] = {GPIO14};
|
| H A D | pinctrl-lantiq.h | 121 GPIO14, enumerator
|
| H A D | pinctrl-falcon.c | 121 MFP_FALCON(GPIO14, LED, GPIO, NONE, NONE),
170 GPIO12, GPIO13, GPIO14};
|
| /openbmc/linux/arch/arm/mach-pxa/ |
| H A D | mfp-pxa320.h | 80 #define GPIO14_HZ_CLK MFP_CFG(GPIO14, AF4)
133 #define GPIO14_KP_MKOUT_5 MFP_CFG_LPM(GPIO14, AF3, DRIVE_HIGH)
233 #define GPIO14_ONE_WIRE MFP_CFG_LPM(GPIO14, AF5, FLOAT)
445 #define GPIO14_CHOUT1 MFP_CFG(GPIO14, AF6)
456 #define GPIO14_PWM3_OUT MFP_CFG(GPIO14, AF1)
|
| H A D | mfp-pxa2xx.h | 68 #define GPIO14_GPIO MFP_CFG_IN(GPIO14, AF0)
|
| H A D | mfp-pxa27x.h | 231 #define GPIO14_SSP2_SFRM MFP_CFG_IN(GPIO14, AF2)
296 #define GPIO14_LCD_VSYNC MFP_CFG_IN(GPIO14, AF1)
411 #define GPIO14_UCLK MFP_CFG_OUT(GPIO14, AF3, DRIVE_LOW)
|
| H A D | mfp-pxa3xx.h | 26 #define GPIO14_GPIO MFP_CFG(GPIO14, AF0)
|
| H A D | mfp-pxa25x.h | 42 #define GPIO14_MBREQ MFP_CFG_IN(GPIO14, AF1)
|
| H A D | mfp-pxa300.h | 213 #define GPIO14_MMC1_CMD MFP_CFG_LPM(GPIO14, AF5, DRIVE_HIGH)
226 #define GPIO14_MMC2_CMD MFP_CFG_LPM(GPIO14, AF4, PULL_HIGH)
|
| /openbmc/linux/arch/arm/boot/dts/broadcom/ |
| H A D | bcm2837-rpi-cm3-io3.dts | 33 "GPIO14",
|
| H A D | bcm2835-rpi-cm1-io1.dts | 33 "GPIO14",
|
| /openbmc/u-boot/arch/arm/include/asm/arch-omap3/ |
| H A D | omap.h | 123 #define GPIO14 (0x1 << 14) macro
|
| /openbmc/linux/Documentation/devicetree/bindings/leds/ |
| H A D | leds-pca955x.txt | 49 gpio-line-names = "GPIO12", "GPIO13", "GPIO14", "GPIO15";
|
| /openbmc/linux/drivers/media/pci/dm1105/ |
| H A D | dm1105.c | 158 #define GPIO14 (1 << 14) macro
165 #define DM1105_LNB_MASK (GPIO_ALL & ~(GPIO14 | GPIO13))
171 #define DM05_LNB_MASK (GPIO_ALL & ~(GPIO14 | GPIO13))
253 .gpio_scl = GPIO14,
|
| /openbmc/linux/arch/arm64/boot/dts/rockchip/ |
| H A D | rk3566-soquartz-cm4.dts | 162 * pin 55 - GPIO14 - uart2_tx_m0
|
| H A D | rk3566-soquartz-blade.dts | 164 * pin 55 - GPIO14 - uart2_tx_m0
|
| H A D | rk3566-soquartz-model-a.dts | 194 * pin 55 - GPIO14 - uart2_tx_m0
|
| /openbmc/linux/Documentation/devicetree/bindings/pinctrl/ |
| H A D | ste,abx500.txt | 75 pins = "GPIO14";
|
| /openbmc/linux/arch/arm64/boot/dts/bitmain/ |
| H A D | bm1880-sophon-edge.dts | 70 "NC", /* GPIO14 */
|
| /openbmc/linux/arch/arm/boot/dts/ti/keystone/ |
| H A D | keystone-k2l.dtsi | 181 * GPIO_TIMIO_SEL[14]: 0-GPIO14, 1-TIMO6
|
| /openbmc/linux/arch/arm/boot/dts/nuvoton/ |
| H A D | nuvoton-npcm730-gsj-gpio.dtsi | 77 pins = "GPIO14/GSPIDI/SMB5CSCL";
|
| /openbmc/u-boot/arch/arm/include/asm/arch-pxa/ |
| H A D | pxa-regs.h | 1330 #define GPIO14 0x40e102ac macro
1523 #define GPIO14 0x40e102a8 macro
|