xref: /openbmc/linux/include/linux/mfd/idt82p33_reg.h (revision 013a3e7c)
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Register Map - Based on AN888_SMUforIEEE_SynchEther_82P33xxx_RevH.pdf
4  *
5  * Copyright (C) 2021 Integrated Device Technology, Inc., a Renesas Company.
6  */
7 #ifndef HAVE_IDT82P33_REG
8 #define HAVE_IDT82P33_REG
9 
10 #define REG_ADDR(page, offset) (((page) << 0x7) | ((offset) & 0x7f))
11 
12 /* Register address */
13 #define DPLL1_TOD_CNFG 0x134
14 #define DPLL2_TOD_CNFG 0x1B4
15 
16 #define DPLL1_TOD_STS 0x10B
17 #define DPLL2_TOD_STS 0x18B
18 
19 #define DPLL1_TOD_TRIGGER 0x115
20 #define DPLL2_TOD_TRIGGER 0x195
21 
22 #define DPLL1_OPERATING_MODE_CNFG 0x120
23 #define DPLL2_OPERATING_MODE_CNFG 0x1A0
24 
25 #define DPLL1_HOLDOVER_FREQ_CNFG 0x12C
26 #define DPLL2_HOLDOVER_FREQ_CNFG 0x1AC
27 
28 #define DPLL1_PHASE_OFFSET_CNFG 0x143
29 #define DPLL2_PHASE_OFFSET_CNFG 0x1C3
30 
31 #define DPLL1_SYNC_EDGE_CNFG 0x140
32 #define DPLL2_SYNC_EDGE_CNFG 0x1C0
33 
34 #define DPLL1_INPUT_MODE_CNFG 0x116
35 #define DPLL2_INPUT_MODE_CNFG 0x196
36 
37 #define DPLL1_OPERATING_STS 0x102
38 #define DPLL2_OPERATING_STS 0x182
39 
40 #define DPLL1_CURRENT_FREQ_STS 0x103
41 #define DPLL2_CURRENT_FREQ_STS 0x183
42 
43 #define REG_SOFT_RESET 0X381
44 
45 #define OUT_MUX_CNFG(outn) REG_ADDR(0x6, (0xC * (outn)))
46 #define TOD_TRIGGER(wr_trig, rd_trig) ((wr_trig & 0xf) << 4 | (rd_trig & 0xf))
47 
48 /* Register bit definitions */
49 #define SYNC_TOD BIT(1)
50 #define PH_OFFSET_EN BIT(7)
51 #define SQUELCH_ENABLE BIT(5)
52 
53 /* Bit definitions for the DPLL_MODE register */
54 #define PLL_MODE_SHIFT		(0)
55 #define PLL_MODE_MASK		(0x1F)
56 #define COMBO_MODE_EN		BIT(5)
57 #define COMBO_MODE_SHIFT	(6)
58 #define COMBO_MODE_MASK		(0x3)
59 
60 /* Bit definitions for DPLL_OPERATING_STS register */
61 #define OPERATING_STS_MASK	(0x7)
62 #define OPERATING_STS_SHIFT	(0x0)
63 
64 /* Bit definitions for DPLL_TOD_TRIGGER register */
65 #define READ_TRIGGER_MASK	(0xF)
66 #define READ_TRIGGER_SHIFT	(0x0)
67 #define WRITE_TRIGGER_MASK	(0xF0)
68 #define WRITE_TRIGGER_SHIFT	(0x4)
69 
70 /* Bit definitions for REG_SOFT_RESET register */
71 #define SOFT_RESET_EN		BIT(7)
72 
73 enum pll_mode {
74 	PLL_MODE_MIN = 0,
75 	PLL_MODE_AUTOMATIC = PLL_MODE_MIN,
76 	PLL_MODE_FORCE_FREERUN = 1,
77 	PLL_MODE_FORCE_HOLDOVER = 2,
78 	PLL_MODE_FORCE_LOCKED = 4,
79 	PLL_MODE_FORCE_PRE_LOCKED2 = 5,
80 	PLL_MODE_FORCE_PRE_LOCKED = 6,
81 	PLL_MODE_FORCE_LOST_PHASE = 7,
82 	PLL_MODE_DCO = 10,
83 	PLL_MODE_WPH = 18,
84 	PLL_MODE_MAX = PLL_MODE_WPH,
85 };
86 
87 enum hw_tod_trig_sel {
88 	HW_TOD_TRIG_SEL_MIN = 0,
89 	HW_TOD_TRIG_SEL_NO_WRITE = HW_TOD_TRIG_SEL_MIN,
90 	HW_TOD_TRIG_SEL_NO_READ = HW_TOD_TRIG_SEL_MIN,
91 	HW_TOD_TRIG_SEL_SYNC_SEL = 1,
92 	HW_TOD_TRIG_SEL_IN12 = 2,
93 	HW_TOD_TRIG_SEL_IN13 = 3,
94 	HW_TOD_TRIG_SEL_IN14 = 4,
95 	HW_TOD_TRIG_SEL_TOD_PPS = 5,
96 	HW_TOD_TRIG_SEL_TIMER_INTERVAL = 6,
97 	HW_TOD_TRIG_SEL_MSB_PHASE_OFFSET_CNFG = 7,
98 	HW_TOD_TRIG_SEL_MSB_HOLDOVER_FREQ_CNFG = 8,
99 	HW_TOD_WR_TRIG_SEL_MSB_TOD_CNFG = 9,
100 	HW_TOD_RD_TRIG_SEL_LSB_TOD_STS = HW_TOD_WR_TRIG_SEL_MSB_TOD_CNFG,
101 	WR_TRIG_SEL_MAX = HW_TOD_WR_TRIG_SEL_MSB_TOD_CNFG,
102 };
103 
104 /** @brief Enumerated type listing DPLL operational modes */
105 enum dpll_state {
106 	DPLL_STATE_FREERUN = 1,
107 	DPLL_STATE_HOLDOVER = 2,
108 	DPLL_STATE_LOCKED = 4,
109 	DPLL_STATE_PRELOCKED2 = 5,
110 	DPLL_STATE_PRELOCKED = 6,
111 	DPLL_STATE_LOSTPHASE = 7,
112 	DPLL_STATE_MAX
113 };
114 
115 #endif
116