xref: /openbmc/linux/arch/arm64/boot/dts/sprd/sharkl3.dtsi (revision 78efc019)
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Unisoc Sharkl3 platform DTS file
4 *
5 * Copyright (C) 2019, Unisoc Inc.
6 */
7
8/ {
9	interrupt-parent = <&gic>;
10	#address-cells = <2>;
11	#size-cells = <2>;
12
13	soc: soc {
14		compatible = "simple-bus";
15		#address-cells = <2>;
16		#size-cells = <2>;
17		ranges;
18
19		ap_ahb_regs: syscon@20e00000 {
20			compatible = "sprd,sc9863a-glbregs", "syscon",
21				     "simple-mfd";
22			reg = <0 0x20e00000 0 0x4000>;
23			#address-cells = <1>;
24			#size-cells = <1>;
25			ranges = <0 0 0x20e00000 0x4000>;
26
27			apahb_gate: apahb-gate {
28				compatible = "sprd,sc9863a-apahb-gate";
29				reg = <0x0 0x1020>;
30				#clock-cells = <1>;
31			};
32		};
33
34		pmu_regs: syscon@402b0000 {
35			compatible = "sprd,sc9863a-glbregs", "syscon",
36				     "simple-mfd";
37			reg = <0 0x402b0000 0 0x4000>;
38			#address-cells = <1>;
39			#size-cells = <1>;
40			ranges = <0 0 0x402b0000 0x4000>;
41
42			pmu_gate: pmu-gate {
43				compatible = "sprd,sc9863a-pmu-gate";
44				reg = <0 0x1200>;
45				clocks = <&ext_26m>;
46				clock-names = "ext-26m";
47				#clock-cells = <1>;
48			};
49		};
50
51		aon_apb_regs: syscon@402e0000 {
52			compatible = "sprd,sc9863a-glbregs", "syscon",
53				     "simple-mfd";
54			reg = <0 0x402e0000 0 0x4000>;
55			#address-cells = <1>;
56			#size-cells = <1>;
57			ranges = <0 0 0x402e0000 0x4000>;
58
59			aonapb_gate: aonapb-gate {
60				compatible = "sprd,sc9863a-aonapb-gate";
61				reg = <0 0x1100>;
62				#clock-cells = <1>;
63			};
64		};
65
66		anlg_phy_g2_regs: syscon@40353000 {
67			compatible = "sprd,sc9863a-glbregs", "syscon",
68				     "simple-mfd";
69			reg = <0 0x40353000 0 0x3000>;
70			#address-cells = <1>;
71			#size-cells = <1>;
72			ranges = <0 0 0x40353000 0x3000>;
73
74			pll: pll {
75				compatible = "sprd,sc9863a-pll";
76				reg = <0 0x100>;
77				clocks = <&ext_26m>;
78				clock-names = "ext-26m";
79				#clock-cells = <1>;
80			};
81		};
82
83		anlg_phy_g4_regs: syscon@40359000 {
84			compatible = "sprd,sc9863a-glbregs", "syscon",
85				     "simple-mfd";
86			reg = <0 0x40359000 0 0x3000>;
87			#address-cells = <1>;
88			#size-cells = <1>;
89			ranges = <0 0 0x40359000 0x3000>;
90
91			mpll: mpll {
92				compatible = "sprd,sc9863a-mpll";
93				reg = <0 0x100>;
94				#clock-cells = <1>;
95			};
96		};
97
98		anlg_phy_g5_regs: syscon@4035c000 {
99			compatible = "sprd,sc9863a-glbregs", "syscon",
100				     "simple-mfd";
101			reg = <0 0x4035c000 0 0x3000>;
102			#address-cells = <1>;
103			#size-cells = <1>;
104			ranges = <0 0 0x4035c000 0x3000>;
105
106			rpll: rpll {
107				compatible = "sprd,sc9863a-rpll";
108				reg = <0 0x100>;
109				clocks = <&ext_26m>;
110				clock-names = "ext-26m";
111				#clock-cells = <1>;
112			};
113		};
114
115		anlg_phy_g7_regs: syscon@40363000 {
116			compatible = "sprd,sc9863a-glbregs", "syscon",
117				     "simple-mfd";
118			reg = <0 0x40363000 0 0x3000>;
119			#address-cells = <1>;
120			#size-cells = <1>;
121			ranges = <0 0 0x40363000 0x3000>;
122
123			dpll: dpll {
124				compatible = "sprd,sc9863a-dpll";
125				reg = <0 0x100>;
126				#clock-cells = <1>;
127			};
128		};
129
130		mm_ahb_regs: syscon@60800000 {
131			compatible = "sprd,sc9863a-glbregs", "syscon",
132				     "simple-mfd";
133			reg = <0 0x60800000 0 0x1000>;
134			#address-cells = <1>;
135			#size-cells = <1>;
136			ranges = <0 0 0x60800000 0x3000>;
137
138			mm_gate: mm-gate {
139				compatible = "sprd,sc9863a-mm-gate";
140				reg = <0 0x1100>;
141				#clock-cells = <1>;
142			};
143		};
144
145		ap_apb_regs: syscon@71300000 {
146			compatible = "sprd,sc9863a-glbregs", "syscon",
147				     "simple-mfd";
148			reg = <0 0x71300000 0 0x4000>;
149			#address-cells = <1>;
150			#size-cells = <1>;
151			ranges = <0 0 0x71300000 0x4000>;
152
153			apapb_gate: apapb-gate {
154				compatible = "sprd,sc9863a-apapb-gate";
155				reg = <0 0x1000>;
156				clocks = <&ext_26m>;
157				clock-names = "ext-26m";
158				#clock-cells = <1>;
159			};
160		};
161
162		apb@70000000 {
163			compatible = "simple-bus";
164			#address-cells = <1>;
165			#size-cells = <1>;
166			ranges = <0 0x0 0x70000000 0x10000000>;
167
168			uart0: serial@0 {
169				compatible = "sprd,sc9863a-uart",
170					     "sprd,sc9836-uart";
171				reg = <0x0 0x100>;
172				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
173				clocks = <&ext_26m>;
174				status = "disabled";
175			};
176
177			uart1: serial@100000 {
178				compatible = "sprd,sc9863a-uart",
179					     "sprd,sc9836-uart";
180				reg = <0x100000 0x100>;
181				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
182				clocks = <&ext_26m>;
183				status = "disabled";
184			};
185
186			uart2: serial@200000 {
187				compatible = "sprd,sc9863a-uart",
188					     "sprd,sc9836-uart";
189				reg = <0x200000 0x100>;
190				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
191				clocks = <&ext_26m>;
192				status = "disabled";
193			};
194
195			uart3: serial@300000 {
196				compatible = "sprd,sc9863a-uart",
197					     "sprd,sc9836-uart";
198				reg = <0x300000 0x100>;
199				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
200				clocks = <&ext_26m>;
201				status = "disabled";
202			};
203
204			uart4: serial@400000 {
205				compatible = "sprd,sc9863a-uart",
206					     "sprd,sc9836-uart";
207				reg = <0x400000 0x100>;
208				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
209				clocks = <&ext_26m>;
210				status = "disabled";
211			};
212		};
213	};
214
215	ext_26m: ext-26m {
216		compatible = "fixed-clock";
217		#clock-cells = <0>;
218		clock-frequency = <26000000>;
219		clock-output-names = "ext-26m";
220	};
221
222	ext_32k: ext-32k {
223		compatible = "fixed-clock";
224		#clock-cells = <0>;
225		clock-frequency = <32768>;
226		clock-output-names = "ext-32k";
227	};
228
229	ext_4m: ext-4m {
230		compatible = "fixed-clock";
231		#clock-cells = <0>;
232		clock-frequency = <4000000>;
233		clock-output-names = "ext-4m";
234	};
235
236	rco_100m: rco-100m {
237		compatible = "fixed-clock";
238		#clock-cells = <0>;
239		clock-frequency = <100000000>;
240		clock-output-names = "rco-100m";
241	};
242};
243