1 /* orinoco_pci.c
2  *
3  * Driver for Prism 2.5/3 devices that have a direct PCI interface
4  * (i.e. these are not PCMCIA cards in a PCMCIA-to-PCI bridge).
5  * The card contains only one PCI region, which contains all the usual
6  * hermes registers, as well as the COR register.
7  *
8  * Current maintainers are:
9  *	Pavel Roskin <proski AT gnu.org>
10  * and	David Gibson <hermes AT gibson.dropbear.id.au>
11  *
12  * Some of this code is borrowed from orinoco_plx.c
13  *	Copyright (C) 2001 Daniel Barlow <dan AT telent.net>
14  * Some of this code is "inspired" by linux-wlan-ng-0.1.10, but nothing
15  * has been copied from it. linux-wlan-ng-0.1.10 is originally :
16  *	Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
17  * This file originally written by:
18  *	Copyright (C) 2001 Jean Tourrilhes <jt AT hpl.hp.com>
19  * And is now maintained by:
20  *	(C) Copyright David Gibson, IBM Corp. 2002-2003.
21  *
22  * The contents of this file are subject to the Mozilla Public License
23  * Version 1.1 (the "License"); you may not use this file except in
24  * compliance with the License. You may obtain a copy of the License
25  * at http://www.mozilla.org/MPL/
26  *
27  * Software distributed under the License is distributed on an "AS IS"
28  * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
29  * the License for the specific language governing rights and
30  * limitations under the License.
31  *
32  * Alternatively, the contents of this file may be used under the
33  * terms of the GNU General Public License version 2 (the "GPL"), in
34  * which case the provisions of the GPL are applicable instead of the
35  * above.  If you wish to allow the use of your version of this file
36  * only under the terms of the GPL and not to allow others to use your
37  * version of this file under the MPL, indicate your decision by
38  * deleting the provisions above and replace them with the notice and
39  * other provisions required by the GPL.  If you do not delete the
40  * provisions above, a recipient may use your version of this file
41  * under either the MPL or the GPL.
42  */
43 
44 #define DRIVER_NAME "orinoco_pci"
45 #define PFX DRIVER_NAME ": "
46 
47 #include <linux/module.h>
48 #include <linux/kernel.h>
49 #include <linux/init.h>
50 #include <linux/delay.h>
51 #include <linux/pci.h>
52 
53 #include "orinoco.h"
54 #include "orinoco_pci.h"
55 
56 /* Offset of the COR register of the PCI card */
57 #define HERMES_PCI_COR		(0x26)
58 
59 /* Bitmask to reset the card */
60 #define HERMES_PCI_COR_MASK	(0x0080)
61 
62 /* Magic timeouts for doing the reset.
63  * Those times are straight from wlan-ng, and it is claimed that they
64  * are necessary. Alan will kill me. Take your time and grab a coffee. */
65 #define HERMES_PCI_COR_ONT	(250)		/* ms */
66 #define HERMES_PCI_COR_OFFT	(500)		/* ms */
67 #define HERMES_PCI_COR_BUSYT	(500)		/* ms */
68 
69 /*
70  * Do a soft reset of the card using the Configuration Option Register
71  * We need this to get going...
72  * This is the part of the code that is strongly inspired from wlan-ng
73  *
74  * Note : This code is done with irq enabled. This mean that many
75  * interrupts will occur while we are there. This is why we use the
76  * jiffies to regulate time instead of a straight mdelay(). Usually we
77  * need only around 245 iteration of the loop to do 250 ms delay.
78  *
79  * Note bis : Don't try to access HERMES_CMD during the reset phase.
80  * It just won't work !
81  */
orinoco_pci_cor_reset(struct orinoco_private * priv)82 static int orinoco_pci_cor_reset(struct orinoco_private *priv)
83 {
84 	struct hermes *hw = &priv->hw;
85 	unsigned long timeout;
86 	u16 reg;
87 
88 	/* Assert the reset until the card notices */
89 	hermes_write_regn(hw, PCI_COR, HERMES_PCI_COR_MASK);
90 	mdelay(HERMES_PCI_COR_ONT);
91 
92 	/* Give time for the card to recover from this hard effort */
93 	hermes_write_regn(hw, PCI_COR, 0x0000);
94 	mdelay(HERMES_PCI_COR_OFFT);
95 
96 	/* The card is ready when it's no longer busy */
97 	timeout = jiffies + msecs_to_jiffies(HERMES_PCI_COR_BUSYT);
98 	reg = hermes_read_regn(hw, CMD);
99 	while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) {
100 		mdelay(1);
101 		reg = hermes_read_regn(hw, CMD);
102 	}
103 
104 	/* Still busy? */
105 	if (reg & HERMES_CMD_BUSY) {
106 		printk(KERN_ERR PFX "Busy timeout\n");
107 		return -ETIMEDOUT;
108 	}
109 
110 	return 0;
111 }
112 
orinoco_pci_init_one(struct pci_dev * pdev,const struct pci_device_id * ent)113 static int orinoco_pci_init_one(struct pci_dev *pdev,
114 				const struct pci_device_id *ent)
115 {
116 	int err;
117 	struct orinoco_private *priv;
118 	struct orinoco_pci_card *card;
119 	void __iomem *hermes_io;
120 
121 	err = pci_enable_device(pdev);
122 	if (err) {
123 		printk(KERN_ERR PFX "Cannot enable PCI device\n");
124 		return err;
125 	}
126 
127 	err = pci_request_regions(pdev, DRIVER_NAME);
128 	if (err) {
129 		printk(KERN_ERR PFX "Cannot obtain PCI resources\n");
130 		goto fail_resources;
131 	}
132 
133 	hermes_io = pci_iomap(pdev, 0, 0);
134 	if (!hermes_io) {
135 		printk(KERN_ERR PFX "Cannot remap chipset registers\n");
136 		err = -EIO;
137 		goto fail_map_hermes;
138 	}
139 
140 	/* Allocate network device */
141 	priv = alloc_orinocodev(sizeof(*card), &pdev->dev,
142 				orinoco_pci_cor_reset, NULL);
143 	if (!priv) {
144 		printk(KERN_ERR PFX "Cannot allocate network device\n");
145 		err = -ENOMEM;
146 		goto fail_alloc;
147 	}
148 
149 	card = priv->card;
150 
151 	hermes_struct_init(&priv->hw, hermes_io, HERMES_32BIT_REGSPACING);
152 
153 	err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
154 			  DRIVER_NAME, priv);
155 	if (err) {
156 		printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
157 		err = -EBUSY;
158 		goto fail_irq;
159 	}
160 
161 	err = orinoco_pci_cor_reset(priv);
162 	if (err) {
163 		printk(KERN_ERR PFX "Initial reset failed\n");
164 		goto fail;
165 	}
166 
167 	err = orinoco_init(priv);
168 	if (err) {
169 		printk(KERN_ERR PFX "orinoco_init() failed\n");
170 		goto fail;
171 	}
172 
173 	err = orinoco_if_add(priv, 0, 0, NULL);
174 	if (err) {
175 		printk(KERN_ERR PFX "orinoco_if_add() failed\n");
176 		goto fail_wiphy;
177 	}
178 
179 	pci_set_drvdata(pdev, priv);
180 
181 	return 0;
182 
183  fail_wiphy:
184 	wiphy_unregister(priv_to_wiphy(priv));
185  fail:
186 	free_irq(pdev->irq, priv);
187 
188  fail_irq:
189 	free_orinocodev(priv);
190 
191  fail_alloc:
192 	pci_iounmap(pdev, hermes_io);
193 
194  fail_map_hermes:
195 	pci_release_regions(pdev);
196 
197  fail_resources:
198 	pci_disable_device(pdev);
199 
200 	return err;
201 }
202 
orinoco_pci_remove_one(struct pci_dev * pdev)203 static void orinoco_pci_remove_one(struct pci_dev *pdev)
204 {
205 	struct orinoco_private *priv = pci_get_drvdata(pdev);
206 
207 	orinoco_if_del(priv);
208 	wiphy_unregister(priv_to_wiphy(priv));
209 	free_irq(pdev->irq, priv);
210 	free_orinocodev(priv);
211 	pci_iounmap(pdev, priv->hw.iobase);
212 	pci_release_regions(pdev);
213 	pci_disable_device(pdev);
214 }
215 
216 static const struct pci_device_id orinoco_pci_id_table[] = {
217 	/* Intersil Prism 3 */
218 	{0x1260, 0x3872, PCI_ANY_ID, PCI_ANY_ID,},
219 	/* Intersil Prism 2.5 */
220 	{0x1260, 0x3873, PCI_ANY_ID, PCI_ANY_ID,},
221 	/* Samsung MagicLAN SWL-2210P */
222 	{0x167d, 0xa000, PCI_ANY_ID, PCI_ANY_ID,},
223 	{0,},
224 };
225 
226 MODULE_DEVICE_TABLE(pci, orinoco_pci_id_table);
227 
228 static struct pci_driver orinoco_pci_driver = {
229 	.name		= DRIVER_NAME,
230 	.id_table	= orinoco_pci_id_table,
231 	.probe		= orinoco_pci_init_one,
232 	.remove		= orinoco_pci_remove_one,
233 	.driver.pm	= &orinoco_pci_pm_ops,
234 };
235 
236 static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
237 	" (Pavel Roskin <proski@gnu.org>,"
238 	" David Gibson <hermes@gibson.dropbear.id.au> &"
239 	" Jean Tourrilhes <jt@hpl.hp.com>)";
240 MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> &"
241 	      " David Gibson <hermes@gibson.dropbear.id.au>");
242 MODULE_DESCRIPTION("Driver for wireless LAN cards using direct PCI interface");
243 MODULE_LICENSE("Dual MPL/GPL");
244 
orinoco_pci_init(void)245 static int __init orinoco_pci_init(void)
246 {
247 	printk(KERN_DEBUG "%s\n", version);
248 	return pci_register_driver(&orinoco_pci_driver);
249 }
250 
orinoco_pci_exit(void)251 static void __exit orinoco_pci_exit(void)
252 {
253 	pci_unregister_driver(&orinoco_pci_driver);
254 }
255 
256 module_init(orinoco_pci_init);
257 module_exit(orinoco_pci_exit);
258