xref: /openbmc/u-boot/include/configs/tbs2910.h (revision da06f9a1)
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright (C) 2014 Soeren Moch <smoch@web.de>
4  *
5  * Configuration settings for the TBS2910 MatrixARM board.
6  */
7 
8 #ifndef __TBS2910_CONFIG_H
9 #define __TBS2910_CONFIG_H
10 
11 #include "mx6_common.h"
12 
13 /* General configuration */
14 
15 #define CONFIG_MACH_TYPE		3980
16 
17 #define CONFIG_SYS_HZ			1000
18 
19 #define CONFIG_IMX_THERMAL
20 
21 /* Physical Memory Map */
22 #define CONFIG_SYS_SDRAM_BASE		MMDC0_ARB_BASE_ADDR
23 
24 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
25 #define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
26 #define CONFIG_SYS_INIT_SP_OFFSET \
27 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
28 #define CONFIG_SYS_INIT_SP_ADDR \
29 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
30 
31 #define CONFIG_SYS_MALLOC_LEN		(128 * 1024 * 1024)
32 
33 #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
34 #define CONFIG_SYS_MEMTEST_END \
35 	(CONFIG_SYS_MEMTEST_START + 500 * 1024 * 1024)
36 
37 #define CONFIG_SYS_BOOTMAPSZ		0x10000000
38 
39 /* Serial console */
40 #define CONFIG_MXC_UART
41 #define CONFIG_MXC_UART_BASE		UART1_BASE /* select UART1/UART2 */
42 
43 /* Filesystems / image support */
44 
45 /* MMC */
46 #define CONFIG_SYS_FSL_USDHC_NUM	3
47 #define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC4_BASE_ADDR
48 #define CONFIG_SUPPORT_EMMC_BOOT
49 
50 /* Ethernet */
51 #define CONFIG_FEC_MXC
52 #define CONFIG_FEC_MXC
53 #define IMX_FEC_BASE			ENET_BASE_ADDR
54 #define CONFIG_FEC_XCV_TYPE		RGMII
55 #define CONFIG_ETHPRIME			"FEC"
56 #define CONFIG_FEC_MXC_PHYADDR		4
57 #define CONFIG_PHY_ATHEROS
58 
59 /* Framebuffer */
60 #ifdef CONFIG_VIDEO
61 #define CONFIG_VIDEO_IPUV3
62 #define CONFIG_VIDEO_BMP_RLE8
63 #define CONFIG_IMX_HDMI
64 #define CONFIG_IMX_VIDEO_SKIP
65 #endif
66 
67 /* PCI */
68 #ifdef CONFIG_CMD_PCI
69 #define CONFIG_PCI_SCAN_SHOW
70 #define CONFIG_PCIE_IMX
71 #define CONFIG_PCIE_IMX_PERST_GPIO	IMX_GPIO_NR(7, 12)
72 #endif
73 
74 /* SATA */
75 #ifdef CONFIG_CMD_SATA
76 #define CONFIG_SYS_SATA_MAX_DEVICE	1
77 #define CONFIG_DWC_AHSATA_PORT_ID	0
78 #define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
79 #define CONFIG_LBA48
80 #endif
81 
82 /* USB */
83 #ifdef CONFIG_CMD_USB
84 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
85 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
86 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
87 #ifdef CONFIG_CMD_USB_MASS_STORAGE
88 #define CONFIG_USBD_HS
89 #endif /* CONFIG_CMD_USB_MASS_STORAGE */
90 #ifdef CONFIG_USB_KEYBOARD
91 #define CONFIG_PREBOOT \
92 	"usb start; " \
93 	"if hdmidet; then " \
94 		"run set_con_hdmi; " \
95 	"else " \
96 		"run set_con_serial; " \
97 	"fi"
98 #endif /* CONFIG_USB_KEYBOARD */
99 #endif /* CONFIG_CMD_USB      */
100 
101 /* RTC */
102 #ifdef CONFIG_CMD_DATE
103 #define CONFIG_RTC_DS1307
104 #define CONFIG_SYS_RTC_BUS_NUM		2
105 #endif
106 
107 /* I2C */
108 #ifdef CONFIG_CMD_I2C
109 #define CONFIG_SYS_I2C
110 #define CONFIG_SYS_I2C_MXC
111 #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
112 #define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
113 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
114 #define CONFIG_SYS_I2C_SPEED		100000
115 #define CONFIG_I2C_EDID
116 #endif
117 
118 /* Environment organization */
119 #define CONFIG_SYS_MMC_ENV_DEV		2 /* overwritten on SD boot */
120 #define CONFIG_SYS_MMC_ENV_PART		1 /* overwritten on SD boot */
121 #define CONFIG_ENV_SIZE			(8 * 1024)
122 #define CONFIG_ENV_OFFSET		(384 * 1024)
123 #define CONFIG_ENV_OVERWRITE
124 
125 #define CONFIG_BOARD_SIZE_LIMIT		392192 /* (CONFIG_ENV_OFFSET - 1024) */
126 
127 #define CONFIG_EXTRA_ENV_SETTINGS \
128 	"bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \
129 	"bootargs_mmc2=video=mxcfb0:dev=hdmi,1920x1080M@60 " \
130 			"video=mxcfb1:off video=mxcfb2:off fbmem=28M\0" \
131 	"bootargs_mmc3=root=/dev/mmcblk0p1 rootwait consoleblank=0 quiet\0" \
132 	"bootargs_mmc=setenv bootargs ${bootargs_mmc1} ${bootargs_mmc2} " \
133 			"${bootargs_mmc3}\0" \
134 	"bootargs_upd=setenv bootargs console=ttymxc0,115200 " \
135 			"rdinit=/sbin/init enable_wait_mode=off\0" \
136 	"bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \
137 			"mmc read 0x10800000 0x800 0x4000; bootm 0x10800000\0" \
138 	"bootcmd_up1=load mmc 1 0x10800000 uImage\0" \
139 	"bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \
140 			"run bootargs_upd; " \
141 			"bootm 0x10800000 0x10d00000\0" \
142 	"console=ttymxc0\0" \
143 	"fan=gpio set 92\0" \
144 	"set_con_serial=setenv stdout serial; " \
145 			"setenv stderr serial\0" \
146 	"set_con_hdmi=setenv stdout serial,vga; " \
147 			"setenv stderr serial,vga\0" \
148 	"stderr=serial,vga\0" \
149 	"stdin=serial,usbkbd\0" \
150 	"stdout=serial,vga\0"
151 
152 #define CONFIG_BOOTCOMMAND \
153 	"mmc rescan; " \
154 	"if run bootcmd_up1; then " \
155 		"run bootcmd_up2; " \
156 	"else " \
157 		"run bootcmd_mmc; " \
158 	"fi"
159 
160 #endif			       /* __TBS2910_CONFIG_H * */
161