xref: /openbmc/u-boot/include/configs/goflexhome.h (revision b8a1f47b)
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com>
4  *
5  * Based on dockstar.h originally written by
6  * Copyright (C) 2010  Eric C. Cooper <ecc@cmu.edu>
7  *
8  * Based on sheevaplug.h originally written by
9  * Prafulla Wadaskar <prafulla@marvell.com>
10  * (C) Copyright 2009
11  * Marvell Semiconductor <www.marvell.com>
12  */
13 
14 #ifndef _CONFIG_GOFLEXHOME_H
15 #define _CONFIG_GOFLEXHOME_H
16 
17 /*
18  * High Level Configuration Options (easy to change)
19  */
20 #define CONFIG_FEROCEON_88FR131	1	/* CPU Core subversion */
21 #define CONFIG_KW88F6281	1	/* SOC Name */
22 #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
23 
24 /*
25  * Default GPIO configuration and LED status
26  */
27 #define GOFLEXHOME_OE_LOW               (~(0))
28 #define GOFLEXHOME_OE_HIGH              (~(0))
29 #define GOFLEXHOME_OE_VAL_LOW           (1 << 29)       /* USB_PWEN low */
30 #define GOFLEXHOME_OE_VAL_HIGH          (1 << 17)       /* LED pin high */
31 
32 /* PHY related */
33 #define MV88E1116_LED_FCTRL_REG         10
34 #define MV88E1116_CPRSP_CR3_REG         21
35 #define MV88E1116_MAC_CTRL_REG          21
36 #define MV88E1116_PGADR_REG             22
37 #define MV88E1116_RGMII_TXTM_CTRL       (1 << 4)
38 #define MV88E1116_RGMII_RXTM_CTRL       (1 << 5)
39 
40 /*
41  * Commands configuration
42  */
43 
44 /*
45  * mv-common.h should be defined after CMD configs since it used them
46  * to enable certain macros
47  */
48 #include "mv-common.h"
49 
50 /*
51  *  Environment variables configurations
52  */
53 #ifdef CONFIG_CMD_NAND
54 #define CONFIG_ENV_SECT_SIZE		0x20000	/* 128K */
55 #endif
56 /*
57  * max 4k env size is enough, but in case of nand
58  * it has to be rounded to sector size
59  */
60 #define CONFIG_ENV_SIZE			0x20000	/* 128k */
61 #define CONFIG_ENV_ADDR			0xC0000
62 #define CONFIG_ENV_OFFSET		0xC0000	/* env starts here */
63 
64 /*
65  * Default environment variables
66  */
67 #define CONFIG_BOOTCOMMAND \
68 	"setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
69 	"ubi part root; " \
70 	"ubifsmount ubi:root; " \
71 	"ubifsload 0x800000 ${kernel}; " \
72 	"bootm 0x800000"
73 
74 #define CONFIG_EXTRA_ENV_SETTINGS \
75 	"console=console=ttyS0,115200\0" \
76 	"mtdids=nand0=orion_nand\0" \
77 	"mtdparts="CONFIG_MTDPARTS_DEFAULT \
78 	"kernel=/boot/uImage\0" \
79 	"bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0"
80 
81 /*
82  * Ethernet Driver configuration
83  */
84 #ifdef CONFIG_CMD_NET
85 #define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
86 #define CONFIG_PHY_BASE_ADR	0
87 #endif /* CONFIG_CMD_NET */
88 
89 /*
90  *  * SATA Driver configuration
91  *   */
92 #ifdef CONFIG_MVSATA_IDE
93 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
94 #endif /*CONFIG_MVSATA_IDE*/
95 
96 #endif /* _CONFIG_GOFLEXHOME_H */
97