1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * brtpp1.h 4 * 5 * specific parts for B&R T-Series Motherboard 6 * 7 * Copyright (C) 2013 Hannes Schmelzer <oe5hpm@oevsv.at> - 8 * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com 9 */ 10 11 #ifndef __CONFIG_BRPPT1_H__ 12 #define __CONFIG_BRPPT1_H__ 13 14 #include <configs/bur_cfg_common.h> 15 #include <configs/bur_am335x_common.h> 16 /* ------------------------------------------------------------------------- */ 17 /* memory */ 18 #define CONFIG_SYS_MALLOC_LEN (5 * 1024 * 1024) 19 #define CONFIG_SYS_BOOTM_LEN SZ_32M 20 21 /* Clock Defines */ 22 #define V_OSCK 26000000 /* Clock output from T2 */ 23 #define V_SCLK (V_OSCK) 24 25 #define CONFIG_POWER_TPS65217 26 27 /* Support both device trees and ATAGs. */ 28 #define CONFIG_CMDLINE_TAG 29 #define CONFIG_SETUP_MEMORY_TAGS 30 #define CONFIG_INITRD_TAG 31 /*#define CONFIG_MACH_TYPE 3589*/ 32 #define CONFIG_MACH_TYPE 0xFFFFFFFF /* TODO: check with kernel*/ 33 34 /* MMC/SD IP block */ 35 #if defined(CONFIG_EMMC_BOOT) 36 #define CONFIG_SUPPORT_EMMC_BOOT 37 #endif /* CONFIG_EMMC_BOOT */ 38 39 /* 40 * When we have NAND flash we expect to be making use of mtdparts, 41 * both for ease of use in U-Boot and for passing information on to 42 * the Linux kernel. 43 */ 44 45 #ifdef CONFIG_SPL_OS_BOOT 46 #define CONFIG_SYS_SPL_ARGS_ADDR 0x80F80000 47 48 /* RAW SD card / eMMC */ 49 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x900 /* address 0x120000 */ 50 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x80 /* address 0x10000 */ 51 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80 /* 64KiB */ 52 53 /* NAND */ 54 #ifdef CONFIG_NAND 55 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x140000 56 #endif /* CONFIG_NAND */ 57 #endif /* CONFIG_SPL_OS_BOOT */ 58 59 #ifdef CONFIG_NAND 60 #define CONFIG_SPL_NAND_BASE 61 #define CONFIG_SPL_NAND_DRIVERS 62 #define CONFIG_SPL_NAND_ECC 63 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 64 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 65 #endif /* CONFIG_NAND */ 66 67 /* Always 64 KiB env size */ 68 #define CONFIG_ENV_SIZE (64 << 10) 69 70 #ifdef CONFIG_NAND 71 #define NANDTGTS \ 72 "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ 73 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ 74 "cfgscr=nand read ${cfgaddr} cfgscr && source ${cfgaddr}\0" \ 75 "nandargs=setenv bootargs console=${console} ${optargs} ${optargs_rot} " \ 76 "root=mtd6 rootfstype=jffs2 b_mode=${b_mode}\0" \ 77 "b_nand=nand read ${loadaddr} kernel; nand read ${dtbaddr} dtb; " \ 78 "run nandargs; run cfgscr; bootz ${loadaddr} - ${dtbaddr}\0" \ 79 "b_tgts_std=usb0 nand net\0" \ 80 "b_tgts_rcy=net usb0 nand\0" \ 81 "b_tgts_pme=usb0 nand net\0" 82 #else 83 #define NANDTGTS "" 84 #endif /* CONFIG_NAND */ 85 86 #define MMCSPI_TGTS \ 87 "t30args#0=setenv bootargs ${optargs_rot} ${optargs} console=${console} " \ 88 "b_mode=${b_mode} root=/dev/mmcblk0p2 rootfstype=ext4\0" \ 89 "b_t30lgcy#0=" \ 90 "load ${loaddev}:2 ${loadaddr} /boot/PPTImage.md5 && " \ 91 "load ${loaddev}:2 ${loadaddr} /boot/zImage && " \ 92 "load ${loaddev}:2 ${dtbaddr} /boot/am335x-ppt30.dtb || " \ 93 "load ${loaddev}:1 ${dtbaddr} am335x-ppt30-legacy.dtb; "\ 94 "run t30args#0; run cfgscr; bootz ${loadaddr} - ${dtbaddr}\0" \ 95 "t30args#1=setenv bootargs ${optargs_rot} ${optargs} console=${console} " \ 96 "b_mode=${b_mode}\0" \ 97 "b_t30lgcy#1=" \ 98 "load ${loaddev}:1 ${loadaddr} zImage && " \ 99 "load ${loaddev}:1 ${dtbaddr} am335x-ppt30.dtb && " \ 100 "load ${loaddev}:1 ${ramaddr} rootfsPPT30.uboot && " \ 101 "run t30args#1; run cfgscr; bootz ${loadaddr} ${ramaddr} ${dtbaddr}\0" \ 102 "b_mmc0=load ${loaddev}:1 ${scraddr} bootscr.img && source ${scraddr}\0" \ 103 "b_mmc1=load ${loaddev}:1 ${scraddr} /boot/bootscr.img && source ${scraddr}\0" \ 104 "b_tgts_std=mmc0 mmc1 t30lgcy#0 t30lgcy#1 usb0 net\0" \ 105 "b_tgts_rcy=t30lgcy#1 usb0 net\0" \ 106 "b_tgts_pme=net usb0 mmc0 mmc1\0" \ 107 "loaddev=mmc 1\0" 108 109 #ifdef CONFIG_ENV_IS_IN_MMC 110 #define MMCTGTS \ 111 MMCSPI_TGTS \ 112 "cfgscr=mmc dev 1; mmc read ${cfgaddr} 200 80; source ${cfgaddr}\0" 113 #else 114 #define MMCTGTS "" 115 #endif /* CONFIG_MMC */ 116 117 #ifdef CONFIG_SPI 118 #define SPITGTS \ 119 MMCSPI_TGTS \ 120 "cfgscr=sf probe; sf read ${cfgaddr} 0xC0000 10000; source ${cfgaddr}\0" 121 #else 122 #define SPITGTS "" 123 #endif /* CONFIG_SPI */ 124 125 #define LOAD_OFFSET(x) 0x8##x 126 127 #ifndef CONFIG_SPL_BUILD 128 #define CONFIG_EXTRA_ENV_SETTINGS \ 129 BUR_COMMON_ENV \ 130 "verify=no\0" \ 131 "autoload=0\0" \ 132 "scraddr=" __stringify(LOAD_OFFSET(0000000)) "\0" \ 133 "cfgaddr=" __stringify(LOAD_OFFSET(0020000)) "\0" \ 134 "dtbaddr=" __stringify(LOAD_OFFSET(0040000)) "\0" \ 135 "loadaddr=" __stringify(LOAD_OFFSET(0100000)) "\0" \ 136 "ramaddr=" __stringify(LOAD_OFFSET(2000000)) "\0" \ 137 "console=ttyO0,115200n8\0" \ 138 "optargs=consoleblank=0 quiet panic=2\0" \ 139 "b_break=0\0" \ 140 "b_usb0=usb start && load usb 0 ${scraddr} bootscr.img && source ${scraddr}\0" \ 141 "b_net=tftp ${scraddr} netscript.img && source ${scraddr}\0" \ 142 MMCTGTS \ 143 SPITGTS \ 144 NANDTGTS \ 145 "b_deftgts=if test ${b_mode} = 12; then setenv b_tgts ${b_tgts_pme};" \ 146 " elif test ${b_mode} = 0; then setenv b_tgts ${b_tgts_rcy};" \ 147 " else setenv b_tgts ${b_tgts_std}; fi\0" \ 148 "b_default=run b_deftgts; for target in ${b_tgts};"\ 149 " do echo \"### booting ${target} ###\"; run b_${target};" \ 150 " if test ${b_break} = 1; then; exit; fi; done\0" 151 #endif /* !CONFIG_SPL_BUILD*/ 152 153 #ifdef CONFIG_NAND 154 /* 155 * GPMC block. We support 1 device and the physical address to 156 * access CS0 at is 0x8000000. 157 */ 158 #define CONFIG_SYS_MAX_NAND_DEVICE 1 159 #define CONFIG_SYS_NAND_BASE 0x8000000 160 /* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */ 161 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW 162 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 163 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) 164 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 165 #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ 166 CONFIG_SYS_NAND_PAGE_SIZE) 167 #define CONFIG_SYS_NAND_OOBSIZE 64 168 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 169 #define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9, \ 170 10, 11, 12, 13, 14, 15, 16, 17, \ 171 18, 19, 20, 21, 22, 23, 24, 25, \ 172 26, 27, 28, 29, 30, 31, 32, 33, \ 173 34, 35, 36, 37, 38, 39, 40, 41, \ 174 42, 43, 44, 45, 46, 47, 48, 49, \ 175 50, 51, 52, 53, 54, 55, 56, 57, } 176 177 #define CONFIG_SYS_NAND_ECCSIZE 512 178 #define CONFIG_SYS_NAND_ECCBYTES 14 179 180 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 181 182 #define CONFIG_NAND_OMAP_GPMC_WSCFG 1 183 #endif /* CONFIG_NAND */ 184 185 /* USB configuration */ 186 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT 187 188 #if defined(CONFIG_SPI) 189 /* SPI Flash */ 190 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000 191 /* Environment */ 192 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 193 #define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE 194 #define CONFIG_ENV_OFFSET 0x20000 195 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \ 196 CONFIG_ENV_SECT_SIZE) 197 #elif defined(CONFIG_ENV_IS_IN_MMC) 198 #define CONFIG_SYS_MMC_ENV_DEV 1 199 #define CONFIG_SYS_MMC_ENV_PART 2 200 #define CONFIG_ENV_OFFSET 0x40000 /* TODO: Adresse definieren */ 201 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) 202 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 203 204 #elif defined(CONFIG_ENV_IS_IN_NAND) 205 /* No NAND env support in SPL */ 206 #define CONFIG_ENV_OFFSET 0x60000 207 #define CONFIG_SYS_ENV_SECT_SIZE CONFIG_ENV_SIZE 208 #else 209 #error "no storage for Environment defined!" 210 #endif 211 212 #endif /* ! __CONFIG_BRPPT1_H__ */ 213