1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Copyright 2023 Gateworks Corporation 4 */ 5 6#include <dt-bindings/gpio/gpio.h> 7#include <dt-bindings/leds/common.h> 8#include <dt-bindings/phy/phy-imx8-pcie.h> 9 10/ { 11 led-controller { 12 compatible = "gpio-leds"; 13 pinctrl-names = "default"; 14 pinctrl-0 = <&pinctrl_gpio_leds>; 15 16 led-0 { 17 function = LED_FUNCTION_STATUS; 18 color = <LED_COLOR_ID_GREEN>; 19 gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>; 20 default-state = "on"; 21 linux,default-trigger = "heartbeat"; 22 }; 23 24 led-1 { 25 function = LED_FUNCTION_STATUS; 26 color = <LED_COLOR_ID_RED>; 27 gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; 28 default-state = "off"; 29 }; 30 }; 31 32 pcie0_refclk: clock-pcie0 { 33 compatible = "fixed-clock"; 34 #clock-cells = <0>; 35 clock-frequency = <100000000>; 36 }; 37 38 pps { 39 compatible = "pps-gpio"; 40 pinctrl-names = "default"; 41 pinctrl-0 = <&pinctrl_pps>; 42 gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>; 43 status = "okay"; 44 }; 45 46 reg_usb1_vbus: regulator-usb1 { 47 compatible = "regulator-fixed"; 48 pinctrl-names = "default"; 49 pinctrl-0 = <&pinctrl_reg_usb1_en>; 50 regulator-name = "usb1_vbus"; 51 gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; 52 enable-active-high; 53 regulator-min-microvolt = <5000000>; 54 regulator-max-microvolt = <5000000>; 55 }; 56 57 reg_usb2_vbus: regulator-usb2 { 58 compatible = "regulator-fixed"; 59 pinctrl-names = "default"; 60 pinctrl-0 = <&pinctrl_reg_usb2_en>; 61 regulator-name = "usb2_vbus"; 62 gpio = <&gpio4 12 GPIO_ACTIVE_HIGH>; 63 enable-active-high; 64 regulator-min-microvolt = <5000000>; 65 regulator-max-microvolt = <5000000>; 66 }; 67 68 reg_usdhc2_vmmc: regulator-usdhc2-vmmc { 69 compatible = "regulator-fixed"; 70 pinctrl-names = "default"; 71 pinctrl-0 = <&pinctrl_usdhc2_vmmc>; 72 regulator-name = "VDD_3V3_SD"; 73 enable-active-high; 74 gpio = <&gpio2 19 0>; /* SD2_RESET */ 75 off-on-delay-us = <12000>; 76 regulator-max-microvolt = <3300000>; 77 regulator-min-microvolt = <3300000>; 78 startup-delay-us = <100>; 79 }; 80}; 81 82/* off-board header */ 83&ecspi2 { 84 pinctrl-names = "default"; 85 pinctrl-0 = <&pinctrl_spi2>; 86 cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; 87 status = "okay"; 88}; 89 90&gpio4 { 91 gpio-line-names = 92 "", "", "", "", 93 "", "", "", "", 94 "dio1", "", "", "dio0", 95 "", "", "pci_usb_sel", "", 96 "", "", "", "", 97 "", "", "rs485_en", "rs485_term", 98 "", "", "", "rs485_half", 99 "pci_wdis#", "", "", ""; 100}; 101 102&i2c2 { 103 clock-frequency = <400000>; 104 pinctrl-names = "default"; 105 pinctrl-0 = <&pinctrl_i2c2>; 106 status = "okay"; 107 108 accelerometer@19 { 109 compatible = "st,lis2de12"; 110 reg = <0x19>; 111 pinctrl-names = "default"; 112 pinctrl-0 = <&pinctrl_accel>; 113 st,drdy-int-pin = <1>; 114 interrupt-parent = <&gpio4>; 115 interrupts = <21 IRQ_TYPE_LEVEL_LOW>; 116 interrupt-names = "INT1"; 117 }; 118}; 119 120&pcie_phy { 121 fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; 122 fsl,clkreq-unsupported; 123 clocks = <&pcie0_refclk>; 124 clock-names = "ref"; 125 status = "okay"; 126}; 127 128&pcie { 129 pinctrl-names = "default"; 130 pinctrl-0 = <&pinctrl_pcie0>; 131 reset-gpio = <&gpio4 29 GPIO_ACTIVE_LOW>; 132 status = "okay"; 133}; 134 135/* GPS */ 136&uart1 { 137 pinctrl-names = "default"; 138 pinctrl-0 = <&pinctrl_uart1>; 139 status = "okay"; 140}; 141 142/* off-board header */ 143&uart3 { 144 pinctrl-names = "default"; 145 pinctrl-0 = <&pinctrl_uart3>; 146 status = "okay"; 147}; 148 149/* RS232 */ 150&uart4 { 151 pinctrl-names = "default"; 152 pinctrl-0 = <&pinctrl_uart4>; 153 status = "okay"; 154}; 155 156/* USB1 - OTG */ 157&usb3_0 { 158 pinctrl-names = "default"; 159 pinctrl-0 = <&pinctrl_usb1>; 160 fsl,over-current-active-low; 161 status = "okay"; 162}; 163 164&usb3_phy0 { 165 vbus-supply = <®_usb1_vbus>; 166 status = "okay"; 167}; 168 169&usb_dwc3_0 { 170 /* dual role is implemented but not a full featured OTG */ 171 adp-disable; 172 hnp-disable; 173 srp-disable; 174 dr_mode = "otg"; 175 usb-role-switch; 176 role-switch-default-mode = "peripheral"; 177 status = "okay"; 178 179 connector { 180 compatible = "gpio-usb-b-connector", "usb-b-connector"; 181 pinctrl-names = "default"; 182 pinctrl-0 = <&pinctrl_usbcon1>; 183 type = "micro"; 184 label = "otg"; 185 id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; 186 }; 187}; 188 189/* USB2 - USB3.0 Hub */ 190&usb3_1 { 191 fsl,permanently-attached; 192 fsl,disable-port-power-control; 193 status = "okay"; 194}; 195 196&usb3_phy1 { 197 vbus-supply = <®_usb2_vbus>; 198 status = "okay"; 199}; 200 201&usb_dwc3_1 { 202 dr_mode = "host"; 203 status = "okay"; 204}; 205 206/* microSD */ 207&usdhc2 { 208 pinctrl-names = "default", "state_100mhz", "state_200mhz"; 209 pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; 210 pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; 211 pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; 212 cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; 213 bus-width = <4>; 214 vmmc-supply = <®_usdhc2_vmmc>; 215 status = "okay"; 216}; 217 218&iomuxc { 219 pinctrl-names = "default"; 220 pinctrl-0 = <&pinctrl_hog>; 221 222 pinctrl_hog: hoggrp { 223 fsl,pins = < 224 MX8MP_IOMUXC_SAI1_RXD6__GPIO4_IO08 0x40000146 /* DIO1 */ 225 MX8MP_IOMUXC_SAI1_TXC__GPIO4_IO11 0x40000146 /* DIO0 */ 226 MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14 0x40000106 /* PCIE_USBSEL */ 227 MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x40000106 /* RS485_HALF */ 228 MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x40000106 /* RS485_EN */ 229 MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23 0x40000106 /* RS485_TERM */ 230 MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x40000106 /* PCIE_WDIS# */ 231 >; 232 }; 233 234 pinctrl_accel: accelgrp { 235 fsl,pins = < 236 MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x150 /* IRQ */ 237 >; 238 }; 239 240 pinctrl_gpio_leds: gpioledgrp { 241 fsl,pins = < 242 MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0x6 /* LEDG */ 243 MX8MP_IOMUXC_SAI1_RXD3__GPIO4_IO05 0x6 /* LEDR */ 244 >; 245 }; 246 247 pinctrl_pcie0: pcie0grp { 248 fsl,pins = < 249 MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x106 250 >; 251 }; 252 253 pinctrl_pps: ppsgrp { 254 fsl,pins = < 255 MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x146 256 >; 257 }; 258 259 pinctrl_reg_usb1_en: regusb1grp { 260 fsl,pins = < 261 MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x146 /* USB1_EN */ 262 >; 263 }; 264 265 pinctrl_usb1: usb1grp { 266 fsl,pins = < 267 MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC 0x140 /* USB1_FLT# */ 268 >; 269 }; 270 271 pinctrl_usbcon1: usbcon1grp { 272 fsl,pins = < 273 MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21 0x140 /* USB1_ID */ 274 >; 275 }; 276 277 pinctrl_reg_usb2_en: regusb2grp { 278 fsl,pins = < 279 MX8MP_IOMUXC_SAI1_TXD0__GPIO4_IO12 0x146 /* USBHUB_RST# */ 280 >; 281 }; 282 283 pinctrl_spi2: spi2grp { 284 fsl,pins = < 285 MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x140 286 MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x140 287 MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x140 288 MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x140 289 >; 290 }; 291 292 pinctrl_uart1: uart1grp { 293 fsl,pins = < 294 MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x140 295 MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x140 296 >; 297 }; 298 299 pinctrl_uart3: uart3grp { 300 fsl,pins = < 301 MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x140 302 MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x140 303 >; 304 }; 305 306 pinctrl_uart4: uart4grp { 307 fsl,pins = < 308 MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x140 309 MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x140 310 >; 311 }; 312 313 pinctrl_usdhc1: usdhc1grp { 314 fsl,pins = < 315 MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x190 316 MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d0 317 MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d0 318 MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d0 319 MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d0 320 MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d0 321 >; 322 }; 323 324 pinctrl_usdhc2: usdhc2grp { 325 fsl,pins = < 326 MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 327 MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 328 MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 329 MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 330 MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 331 MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 332 MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 333 >; 334 }; 335 336 pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { 337 fsl,pins = < 338 MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194 339 MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4 340 MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4 341 MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 342 MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 343 MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 344 MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 345 >; 346 }; 347 348 pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { 349 fsl,pins = < 350 MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196 351 MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6 352 MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6 353 MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 354 MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 355 MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 356 MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 357 >; 358 }; 359 360 pinctrl_usdhc2_vmmc: usdhc2-vmmc-grp { 361 fsl,pins = < 362 MX8MP_IOMUXC_SD2_RESET_B__USDHC2_RESET_B 0x1d0 363 >; 364 }; 365 366 pinctrl_usdhc2_gpio: usdhc2gpiogrp { 367 fsl,pins = < 368 MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4 369 >; 370 }; 371}; 372