1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2/*
3 * Copyright 2018-2022 Toradex
4 */
5
6#include "imx6ull.dtsi"
7
8/ {
9	/* Ethernet aliases to ensure correct MAC addresses */
10	aliases {
11		ethernet0 = &fec2;
12		ethernet1 = &fec1;
13	};
14
15	backlight: backlight {
16		compatible = "pwm-backlight";
17		brightness-levels = <0 4 8 16 32 64 128 255>;
18		default-brightness-level = <6>;
19		enable-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
20		pinctrl-names = "default";
21		pinctrl-0 = <&pinctrl_gpio_bl_on>;
22		power-supply = <&reg_3v3>;
23		pwms = <&pwm4 0 5000000 1>;
24		status = "disabled";
25	};
26
27	connector {
28		compatible = "gpio-usb-b-connector", "usb-b-connector";
29		pinctrl-names = "default";
30		pinctrl-0 = <&pinctrl_snvs_usbc_det>;
31		id-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */
32		label = "USBC";
33		self-powered;
34		type = "micro";
35
36		port {
37			usb_dr_connector: endpoint {
38				remote-endpoint = <&usb1_drd_sw>;
39			};
40		};
41	};
42
43	gpio-keys {
44		compatible = "gpio-keys";
45		pinctrl-names = "default";
46		pinctrl-0 = <&pinctrl_snvs_gpiokeys>;
47
48		key-wakeup {
49			debounce-interval = <10>;
50			gpios = <&gpio5 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* SODIMM 45 */
51			label = "Wake-Up";
52			linux,code = <KEY_WAKEUP>;
53			wakeup-source;
54		};
55	};
56
57	panel_dpi: panel-dpi {
58		compatible = "edt,et057090dhu";
59		backlight = <&backlight>;
60		power-supply = <&reg_3v3>;
61		status = "disabled";
62
63		port {
64			lcd_panel_in: endpoint {
65				remote-endpoint = <&lcdif_out>;
66			};
67		};
68	};
69
70	reg_module_3v3: regulator-module-3v3 {
71		compatible = "regulator-fixed";
72		regulator-always-on;
73		regulator-name = "+V3.3";
74		regulator-min-microvolt = <3300000>;
75		regulator-max-microvolt = <3300000>;
76	};
77
78	reg_module_3v3_avdd: regulator-module-3v3-avdd {
79		compatible = "regulator-fixed";
80		regulator-always-on;
81		regulator-name = "+V3.3_AVDD_AUDIO";
82		regulator-min-microvolt = <3300000>;
83		regulator-max-microvolt = <3300000>;
84	};
85
86	reg_sd1_vqmmc: regulator-sd1-vqmmc {
87		compatible = "regulator-gpio";
88		gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
89		pinctrl-names = "default";
90		pinctrl-0 = <&pinctrl_snvs_reg_sd>;
91		regulator-always-on;
92		regulator-name = "+V3.3_1.8_SD";
93		regulator-min-microvolt = <1800000>;
94		regulator-max-microvolt = <3300000>;
95		states = <1800000 0x1 3300000 0x0>;
96		vin-supply = <&reg_module_3v3>;
97	};
98
99	reg_eth_phy: regulator-eth-phy {
100		compatible = "regulator-fixed-clock";
101		regulator-boot-on;
102		regulator-min-microvolt = <3300000>;
103		regulator-max-microvolt = <3300000>;
104		regulator-name = "+V3.3_ETH";
105		vin-supply = <&reg_module_3v3>;
106		clocks = <&clks IMX6UL_CLK_ENET2_REF_125M>;
107		startup-delay-us = <150000>;
108	};
109};
110
111&adc1 {
112	vref-supply = <&reg_module_3v3_avdd>;
113	pinctrl-names = "default";
114	pinctrl-0 = <&pinctrl_adc1>;
115};
116
117&can1 {
118	pinctrl-names = "default";
119	pinctrl-0 = <&pinctrl_flexcan1>;
120	status = "disabled";
121};
122
123&can2 {
124	pinctrl-names = "default";
125	pinctrl-0 = <&pinctrl_flexcan2>;
126	status = "disabled";
127};
128
129/* Colibri SPI */
130&ecspi1 {
131	cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
132	pinctrl-names = "default";
133	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
134};
135
136/* Ethernet */
137&fec2 {
138	pinctrl-names = "default", "sleep";
139	pinctrl-0 = <&pinctrl_enet2>;
140	pinctrl-1 = <&pinctrl_enet2_sleep>;
141	phy-mode = "rmii";
142	phy-handle = <&ethphy1>;
143	phy-supply = <&reg_eth_phy>;
144	status = "okay";
145
146	mdio {
147		#address-cells = <1>;
148		#size-cells = <0>;
149
150		ethphy1: ethernet-phy@2 {
151			compatible = "ethernet-phy-ieee802.3-c22";
152			max-speed = <100>;
153			reg = <2>;
154		};
155	};
156};
157
158/* NAND */
159&gpmi {
160	pinctrl-names = "default";
161	pinctrl-0 = <&pinctrl_gpmi_nand>;
162	fsl,use-minimum-ecc;
163	nand-on-flash-bbt;
164	nand-ecc-mode = "hw";
165	nand-ecc-strength = <8>;
166	nand-ecc-step-size = <512>;
167	status = "okay";
168};
169
170/* I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board) */
171&i2c1 {
172	pinctrl-names = "default", "gpio";
173	pinctrl-0 = <&pinctrl_i2c1>;
174	pinctrl-1 = <&pinctrl_i2c1_gpio>;
175	sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
176	scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
177	status = "disabled";
178
179	/* Atmel maxtouch controller */
180	atmel_mxt_ts: touchscreen@4a {
181		compatible = "atmel,maxtouch";
182		pinctrl-names = "default";
183		pinctrl-0 = <&pinctrl_atmel_conn &pinctrl_atmel_snvs_conn>;
184		reg = <0x4a>;
185		interrupt-parent = <&gpio5>;
186		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;       /* SODIMM 107 / INT */
187		reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;    /* SODIMM 106 / RST */
188		status = "disabled";
189	};
190};
191
192/*
193 * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
194 * touch screen controller
195 */
196&i2c2 {
197	/* Use low frequency to compensate for the high pull-up values. */
198	clock-frequency = <40000>;
199	pinctrl-names = "default", "gpio";
200	pinctrl-0 = <&pinctrl_i2c2>;
201	pinctrl-1 = <&pinctrl_i2c2_gpio>;
202	sda-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
203	scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
204	status = "okay";
205
206	ad7879_ts: touchscreen@2c {
207		compatible = "adi,ad7879-1";
208		pinctrl-names = "default";
209		pinctrl-0 = <&pinctrl_snvs_ad7879_int>;
210		reg = <0x2c>;
211		interrupt-parent = <&gpio5>;
212		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
213		touchscreen-max-pressure = <4096>;
214		adi,resistance-plate-x = <120>;
215		adi,first-conversion-delay = /bits/ 8 <3>;
216		adi,acquisition-time = /bits/ 8 <1>;
217		adi,median-filter-size = /bits/ 8 <2>;
218		adi,averaging = /bits/ 8 <1>;
219		adi,conversion-interval = /bits/ 8 <255>;
220		status = "disabled";
221	};
222};
223
224&lcdif {
225	pinctrl-names = "default";
226	pinctrl-0 = <&pinctrl_lcdif_dat
227		     &pinctrl_lcdif_ctrl>;
228	status = "disabled";
229
230	port {
231		lcdif_out: endpoint {
232			remote-endpoint = <&lcd_panel_in>;
233		};
234	};
235};
236
237/* PWM <A> */
238&pwm4 {
239	pinctrl-names = "default";
240	pinctrl-0 = <&pinctrl_pwm4>;
241};
242
243/* PWM <B> */
244&pwm5 {
245	pinctrl-names = "default";
246	pinctrl-0 = <&pinctrl_pwm5>;
247};
248
249/* PWM <C> */
250&pwm6 {
251	pinctrl-names = "default";
252	pinctrl-0 = <&pinctrl_pwm6>;
253};
254
255/* PWM <D> */
256&pwm7 {
257	pinctrl-names = "default";
258	pinctrl-0 = <&pinctrl_pwm7>;
259};
260
261&sdma {
262	status = "okay";
263};
264
265&snvs_pwrkey {
266	status = "disabled";
267};
268
269/* Colibri UART_A */
270&uart1 {
271	pinctrl-names = "default";
272	pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1>;
273	uart-has-rtscts;
274	fsl,dte-mode;
275};
276
277/* Colibri UART_B */
278&uart2 {
279	pinctrl-names = "default";
280	pinctrl-0 = <&pinctrl_uart2>;
281	uart-has-rtscts;
282	fsl,dte-mode;
283};
284
285/* Colibri UART_C */
286&uart5 {
287	pinctrl-names = "default";
288	pinctrl-0 = <&pinctrl_uart5>;
289	fsl,dte-mode;
290};
291
292/* Colibri USBC */
293&usbotg1 {
294	dr_mode = "otg";
295	srp-disable;
296	hnp-disable;
297	adp-disable;
298	usb-role-switch;
299
300	port {
301		usb1_drd_sw: endpoint {
302			remote-endpoint = <&usb_dr_connector>;
303		};
304	};
305};
306
307/* Colibri USBH */
308&usbotg2 {
309	dr_mode = "host";
310};
311
312/* Colibri MMC/SD */
313&usdhc1 {
314	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
315	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd>;
316	pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_snvs_usdhc1_cd>;
317	pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_snvs_usdhc1_cd>;
318	pinctrl-3 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd_sleep>;
319	assigned-clocks = <&clks IMX6UL_CLK_USDHC1_SEL>, <&clks IMX6UL_CLK_USDHC1>;
320	assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
321	assigned-clock-rates = <0>, <198000000>;
322	bus-width = <4>;
323	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; /* MMC_CD */
324	disable-wp;
325	keep-power-in-suspend;
326	no-1-8-v;
327	vqmmc-supply = <&reg_sd1_vqmmc>;
328	wakeup-source;
329};
330
331&wdog1 {
332	pinctrl-names = "default";
333	pinctrl-0 = <&pinctrl_wdog>;
334	fsl,ext-reset-output;
335};
336
337&iomuxc {
338	pinctrl_adc1: adc1grp {
339		fsl,pins = <
340			MX6UL_PAD_GPIO1_IO00__GPIO1_IO00        0x3000 /* SODIMM 8 */
341			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01        0x3000 /* SODIMM 6 */
342			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08        0x3000 /* SODIMM 4 */
343			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09        0x3000 /* SODIMM 2 */
344		>;
345	};
346
347	pinctrl_atmel_adap: atmeladapgrp {
348		fsl,pins = <
349			MX6UL_PAD_NAND_DQS__GPIO4_IO16          0xb0a0  /* SODIMM 28 */
350			MX6UL_PAD_ENET1_TX_EN__GPIO2_IO05       0xb0a0  /* SODIMM 30 */
351		>;
352	};
353
354	pinctrl_atmel_conn: atmelconngrp {
355		fsl,pins = <
356			MX6UL_PAD_JTAG_MOD__GPIO1_IO10          0xb0a0  /* SODIMM 106 */
357		>;
358	};
359
360	pinctrl_can_int: canintgrp {
361		fsl,pins = <
362			MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04	0x13010	/* SODIMM 73 */
363		>;
364	};
365
366	pinctrl_enet2: enet2grp {
367		fsl,pins = <
368			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
369			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
370			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
371			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
372			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
373			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
374			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
375			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
376			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
377			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
378		>;
379	};
380
381	pinctrl_enet2_sleep: enet2-sleepgrp {
382		fsl,pins = <
383			MX6UL_PAD_GPIO1_IO06__GPIO1_IO06	0x0
384			MX6UL_PAD_GPIO1_IO07__GPIO1_IO07	0x0
385			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08	0x0
386			MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09	0x0
387			MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10	0x0
388			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15	0x0
389			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
390			MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11	0x0
391			MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12	0x0
392			MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13	0x0
393		>;
394	};
395
396	pinctrl_ecspi1_cs: ecspi1csgrp {
397		fsl,pins = <
398			MX6UL_PAD_LCD_DATA21__GPIO3_IO26	0x70a0	/* SODIMM 86 */
399		>;
400	};
401
402	pinctrl_ecspi1: ecspi1grp {
403		fsl,pins = <
404			MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK	0x000a0	/* SODIMM 88 */
405			MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI	0x000a0 /* SODIMM 92 */
406			MX6UL_PAD_LCD_DATA23__ECSPI1_MISO	0x100a0 /* SODIMM 90 */
407		>;
408	};
409
410	pinctrl_flexcan1: flexcan1grp {
411		fsl,pins = <
412			MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX	0x1b020
413			MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX	0x1b020
414		>;
415	};
416
417	pinctrl_flexcan2: flexcan2grp {
418		fsl,pins = <
419			MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX	0x1b020
420			MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX	0x1b020
421		>;
422	};
423
424	pinctrl_gpio_bl_on: gpioblongrp {
425		fsl,pins = <
426			MX6UL_PAD_JTAG_TMS__GPIO1_IO11		0x30a0	/* SODIMM 71 */
427		>;
428	};
429
430	pinctrl_gpio1: gpio1grp {
431		fsl,pins = <
432			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25	0x10b0 /* SODIMM 77 */
433			MX6UL_PAD_JTAG_TCK__GPIO1_IO14		0x70a0 /* SODIMM 99 */
434			MX6UL_PAD_NAND_CE1_B__GPIO4_IO14	0x10b0 /* SODIMM 133 */
435			MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24	0x10b0 /* SODIMM 135 */
436			MX6UL_PAD_UART3_CTS_B__GPIO1_IO26	0x10b0 /* SODIMM 100 */
437			MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15	0x70a0 /* SODIMM 102 */
438			MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07	0x10b0 /* SODIMM 104 */
439			MX6UL_PAD_UART3_RTS_B__GPIO1_IO27	0x10b0 /* SODIMM 186 */
440		>;
441	};
442
443	pinctrl_gpio2: gpio2grp { /* Camera */
444		fsl,pins = <
445			MX6UL_PAD_CSI_DATA04__GPIO4_IO25	0x10b0 /* SODIMM 69 */
446			MX6UL_PAD_CSI_MCLK__GPIO4_IO17		0x10b0 /* SODIMM 75 */
447			MX6UL_PAD_CSI_DATA06__GPIO4_IO27	0x10b0 /* SODIMM 85 */
448			MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18	0x10b0 /* SODIMM 96 */
449			MX6UL_PAD_CSI_DATA05__GPIO4_IO26	0x10b0 /* SODIMM 98 */
450		>;
451	};
452
453	pinctrl_gpio3: gpio3grp { /* CAN2 */
454		fsl,pins = <
455			MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02	0x10b0 /* SODIMM 178 */
456			MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03	0x10b0 /* SODIMM 188 */
457		>;
458	};
459
460	pinctrl_gpio4: gpio4grp {
461		fsl,pins = <
462			MX6UL_PAD_CSI_DATA07__GPIO4_IO28	0x10b0 /* SODIMM 65 */
463		>;
464	};
465
466	pinctrl_gpio6: gpio6grp { /* Wifi pins */
467		fsl,pins = <
468			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x10b0 /* SODIMM 89 */
469			MX6UL_PAD_CSI_DATA02__GPIO4_IO23	0x10b0 /* SODIMM 79 */
470			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19		0x10b0 /* SODIMM 81 */
471			MX6UL_PAD_CSI_DATA03__GPIO4_IO24	0x10b0 /* SODIMM 97 */
472			MX6UL_PAD_CSI_DATA00__GPIO4_IO21	0x10b0 /* SODIMM 101 */
473			MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x10b0 /* SODIMM 103 */
474			MX6UL_PAD_CSI_HSYNC__GPIO4_IO20		0x10b0 /* SODIMM 94 */
475		>;
476	};
477
478	pinctrl_gpio7: gpio7grp { /* CAN1 */
479		fsl,pins = <
480			MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00	0xb0b0/* SODIMM 55 */
481			MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01	0xb0b0 /* SODIMM 63 */
482		>;
483	};
484
485	/*
486	 * With an eMMC instead of a raw NAND device the following pins
487	 * are available at SODIMM pins.
488	 */
489	pinctrl_gpmi_gpio: gpmigpiogrp {
490		fsl,pins = <
491			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x10b0 /* SODIMM 140 */
492			MX6UL_PAD_NAND_CE0_B__GPIO4_IO13	0x10b0 /* SODIMM 144 */
493			MX6UL_PAD_NAND_CLE__GPIO4_IO15		0x10b0 /* SODIMM 146 */
494			MX6UL_PAD_NAND_READY_B__GPIO4_IO12	0x10b0 /* SODIMM 142 */
495		>;
496	};
497
498	pinctrl_gpmi_nand: gpminandgrp {
499		fsl,pins = <
500			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0x100a9
501			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0x100a9
502			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0x100a9
503			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0x100a9
504			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0x100a9
505			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0x100a9
506			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0x100a9
507			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0x100a9
508			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0x100a9
509			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0x100a9
510			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0x100a9
511			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0x100a9
512			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0x100a9
513			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0x100a9
514		>;
515	};
516
517	pinctrl_i2c1: i2c1grp {
518		fsl,pins = <
519			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0	/* SODIMM 196 */
520			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0	/* SODIMM 194 */
521		>;
522	};
523
524	pinctrl_i2c1_gpio: i2c1-gpiogrp {
525		fsl,pins = <
526			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x4001b8b0	/* SODIMM 196 */
527			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x4001b8b0	/* SODIMM 194 */
528		>;
529	};
530
531	pinctrl_i2c2: i2c2grp {
532		fsl,pins = <
533			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001f8b0
534			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001f8b0
535		>;
536	};
537
538	pinctrl_i2c2_gpio: i2c2-gpiogrp {
539		fsl,pins = <
540			MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x4001f8b0
541			MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x4001f8b0
542		>;
543	};
544
545	pinctrl_lcdif_dat: lcdifdatgrp {
546		fsl,pins = <
547			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x00079	/* SODIMM 76 */
548			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x00079	/* SODIMM 70 */
549			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x00079	/* SODIMM 60 */
550			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x00079	/* SODIMM 58 */
551			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x00079	/* SODIMM 78 */
552			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x00079	/* SODIMM 72 */
553			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x00079	/* SODIMM 80 */
554			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x00079	/* SODIMM 46 */
555			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x00079	/* SODIMM 62 */
556			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x00079	/* SODIMM 48 */
557			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x00079	/* SODIMM 74 */
558			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x00079	/* SODIMM 50 */
559			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x00079	/* SODIMM 52 */
560			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x00079	/* SODIMM 54 */
561			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x00079	/* SODIMM 66 */
562			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x00079	/* SODIMM 64 */
563			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x00079	/* SODIMM 57 */
564			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x00079	/* SODIMM 61 */
565		>;
566	};
567
568	pinctrl_lcdif_ctrl: lcdifctrlgrp {
569		fsl,pins = <
570			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x00079	/* SODIMM 56 */
571			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x00079	/* SODIMM 44 */
572			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x00079	/* SODIMM 68 */
573			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x00079	/* SODIMM 82 */
574		>;
575	};
576
577	pinctrl_pwm4: pwm4grp {
578		fsl,pins = <
579			MX6UL_PAD_NAND_WP_B__PWM4_OUT	0x00079		/* SODIMM 59 */
580		>;
581	};
582
583	pinctrl_pwm5: pwm5grp {
584		fsl,pins = <
585			MX6UL_PAD_NAND_DQS__PWM5_OUT	0x00079		/* SODIMM 28 */
586		>;
587	};
588
589	pinctrl_pwm6: pwm6grp {
590		fsl,pins = <
591			MX6UL_PAD_ENET1_TX_EN__PWM6_OUT	0x00079		/* SODIMM 30 */
592		>;
593	};
594
595	pinctrl_pwm7: pwm7grp {
596		fsl,pins = <
597			MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT	0x00079	/* SODIMM 67 */
598		>;
599	};
600
601	pinctrl_uart1: uart1grp {
602		fsl,pins = <
603			MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX	0x1b0b1	/* SODIMM 33 */
604			MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX	0x1b0b1	/* SODIMM 35 */
605			MX6UL_PAD_UART1_RTS_B__UART1_DTE_CTS	0x1b0b1	/* SODIMM 27 */
606			MX6UL_PAD_UART1_CTS_B__UART1_DTE_RTS	0x1b0b1	/* SODIMM 25 */
607		>;
608	};
609
610	pinctrl_uart1_ctrl1: uart1ctrl1grp { /* Additional DTR, DCD */
611		fsl,pins = <
612			MX6UL_PAD_JTAG_TDI__GPIO1_IO13		0x70a0 /* SODIMM 31 / DCD */
613			MX6UL_PAD_LCD_DATA18__GPIO3_IO23	0x10b0 /* SODIMM 29 / DSR */
614			MX6UL_PAD_JTAG_TDO__GPIO1_IO12		0x90b1 /* SODIMM 23 / DTR */
615			MX6UL_PAD_LCD_DATA19__GPIO3_IO24        0x10b0 /* SODIMM 37 / RI */
616		>;
617	};
618
619	pinctrl_uart2: uart2grp {
620		fsl,pins = <
621			MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX	0x1b0b1 /* SODIMM 36 */
622			MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX	0x1b0b1 /* SODIMM 38 */
623			MX6UL_PAD_UART2_CTS_B__UART2_DTE_RTS	0x1b0b1 /* SODIMM 32 */
624			MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS	0x1b0b1 /* SODIMM 34 */
625		>;
626	};
627	pinctrl_uart5: uart5grp {
628		fsl,pins = <
629			MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX	0x1b0b1 /* SODIMM 19 */
630			MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX	0x1b0b1 /* SODIMM 21 */
631		>;
632	};
633
634	pinctrl_usbh_reg: usbhreggrp {
635		fsl,pins = <
636			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x10b0 /* SODIMM 129 / USBH_PEN */
637		>;
638	};
639
640	pinctrl_usdhc1: usdhc1grp {
641		fsl,pins = <
642			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059 /* SODIMM 47 */
643			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059 /* SODIMM 190 */
644			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059 /* SODIMM 192 */
645			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059 /* SODIMM 49 */
646			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059 /* SODIMM 51 */
647			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059 /* SODIMM 53 */
648		>;
649	};
650
651	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
652		fsl,pins = <
653			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
654			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
655			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
656			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
657			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
658			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
659		>;
660	};
661
662	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
663		fsl,pins = <
664			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
665			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
666			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
667			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
668			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
669			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
670		>;
671	};
672
673	pinctrl_usdhc2: usdhc2grp {
674		fsl,pins = <
675			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0	0x17069
676			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1	0x17069
677			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2	0x17069
678			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3	0x17069
679			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD		0x17069
680			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK		0x10069
681
682			MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT	0x10
683		>;
684	};
685
686	pinctrl_usdhc2emmc: usdhc2emmcgrp {
687		fsl,pins = <
688			MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x17059
689			MX6UL_PAD_NAND_WE_B__USDHC2_CMD     0x17059
690			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
691			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
692			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
693			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
694			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059
695			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059
696			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059
697			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059
698		>;
699	};
700
701	pinctrl_wdog: wdoggrp {
702		fsl,pins = <
703			MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY    0x30b0
704		>;
705	};
706};
707
708&iomuxc_snvs {
709	pinctrl_atmel_snvs_conn: atmelsnvsconngrp {
710		fsl,pins = <
711			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04     0xb0a0	/* SODIMM 107 */
712		>;
713	};
714
715	pinctrl_snvs_gpio1: snvsgpio1grp {
716		fsl,pins = <
717			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x110a0	/* SODIMM 93 */
718			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x110a0	/* SODIMM 95 */
719			MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10	0x1b0a0	/* SODIMM 105 */
720			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x0b0a0	/* SODIMM 131 / USBH_OC */
721			MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x110a0	/* SODIMM 138 */
722		>;
723	};
724
725	pinctrl_snvs_gpio3: snvsgpio3grp { /* Wifi pins */
726		fsl,pins = <
727			MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11	0x130a0	/* SODIMM 127 */
728		>;
729	};
730
731	pinctrl_snvs_ad7879_int: snvsad7879intgrp { /* TOUCH Interrupt */
732		fsl,pins = <
733			MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x100b0
734		>;
735	};
736
737	pinctrl_snvs_reg_sd: snvsregsdgrp {
738		fsl,pins = <
739			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x400100b0
740		>;
741	};
742
743	pinctrl_snvs_usbc_det: snvsusbcdetgrp {
744		fsl,pins = <
745			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x130b0
746		>;
747	};
748
749	pinctrl_snvs_gpiokeys: snvsgpiokeysgrp {
750		fsl,pins = <
751			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x130a0	/* SODIMM 45 / WAKE_UP */
752		>;
753	};
754
755	pinctrl_snvs_usdhc1_cd: snvsusdhc1cdgrp {
756		fsl,pins = <
757			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x1b0a0 /* SODIMM 43 / MMC_CD */
758		>;
759	};
760
761	pinctrl_snvs_usdhc1_cd_sleep: snvsusdhc1cd-sleepgrp {
762		fsl,pins = <
763			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x0
764		>;
765	};
766
767	pinctrl_snvs_wifi_pdn: snvswifipdngrp {
768		fsl,pins = <
769			MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11	0x130a0
770		>;
771	};
772};
773