xref: /openbmc/linux/arch/arm/boot/dts/nxp/imx/imx1.dtsi (revision 509c2239)
1// SPDX-License-Identifier: GPL-2.0+
2//
3// Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
4
5#include "imx1-pinfunc.h"
6
7#include <dt-bindings/clock/imx1-clock.h>
8#include <dt-bindings/gpio/gpio.h>
9#include <dt-bindings/interrupt-controller/irq.h>
10
11/ {
12	#address-cells = <1>;
13	#size-cells = <1>;
14	/*
15	 * The decompressor and also some bootloaders rely on a
16	 * pre-existing /chosen node to be available to insert the
17	 * command line and merge other ATAGS info.
18	 */
19	chosen {};
20
21	aliases {
22		gpio0 = &gpio1;
23		gpio1 = &gpio2;
24		gpio2 = &gpio3;
25		gpio3 = &gpio4;
26		i2c0 = &i2c;
27		serial0 = &uart1;
28		serial1 = &uart2;
29		serial2 = &uart3;
30		spi0 = &cspi1;
31		spi1 = &cspi2;
32	};
33
34	aitc: aitc-interrupt-controller@223000 {
35		compatible = "fsl,imx1-aitc", "fsl,avic";
36		interrupt-controller;
37		#interrupt-cells = <1>;
38		reg = <0x00223000 0x1000>;
39	};
40
41	cpus {
42		#size-cells = <0>;
43		#address-cells = <1>;
44
45		cpu@0 {
46			device_type = "cpu";
47			reg = <0>;
48			compatible = "arm,arm920t";
49			operating-points = <200000 1900000>;
50			clock-latency = <62500>;
51			clocks = <&clks IMX1_CLK_MCU>;
52			voltage-tolerance = <5>;
53		};
54	};
55
56	clocks {
57		clk32 {
58			compatible = "fixed-clock";
59			#clock-cells = <0>;
60			clock-frequency = <32000>;
61		};
62	};
63
64	soc {
65		#address-cells = <1>;
66		#size-cells = <1>;
67		compatible = "simple-bus";
68		interrupt-parent = <&aitc>;
69		ranges;
70
71		aipi@200000 {
72			compatible = "fsl,aipi-bus", "simple-bus";
73			#address-cells = <1>;
74			#size-cells = <1>;
75			reg = <0x00200000 0x10000>;
76			ranges;
77
78			gpt1: timer@202000 {
79				compatible = "fsl,imx1-gpt";
80				reg = <0x00202000 0x1000>;
81				interrupts = <59>;
82				clocks = <&clks IMX1_CLK_HCLK>,
83					 <&clks IMX1_CLK_PER1>;
84				clock-names = "ipg", "per";
85			};
86
87			gpt2: timer@203000 {
88				compatible = "fsl,imx1-gpt";
89				reg = <0x00203000 0x1000>;
90				interrupts = <58>;
91				clocks = <&clks IMX1_CLK_HCLK>,
92					 <&clks IMX1_CLK_PER1>;
93				clock-names = "ipg", "per";
94			};
95
96			fb: fb@205000 {
97				compatible = "fsl,imx1-fb";
98				reg = <0x00205000 0x1000>;
99				interrupts = <14>;
100				clocks = <&clks IMX1_CLK_DUMMY>,
101					 <&clks IMX1_CLK_DUMMY>,
102					 <&clks IMX1_CLK_PER2>;
103				clock-names = "ipg", "ahb", "per";
104				status = "disabled";
105			};
106
107			uart1: serial@206000 {
108				compatible = "fsl,imx1-uart";
109				reg = <0x00206000 0x1000>;
110				interrupts = <30 29 26>;
111				clocks = <&clks IMX1_CLK_HCLK>,
112					 <&clks IMX1_CLK_PER1>;
113				clock-names = "ipg", "per";
114				status = "disabled";
115			};
116
117			uart2: serial@207000 {
118				compatible = "fsl,imx1-uart";
119				reg = <0x00207000 0x1000>;
120				interrupts = <24 23 20>;
121				clocks = <&clks IMX1_CLK_HCLK>,
122					 <&clks IMX1_CLK_PER1>;
123				clock-names = "ipg", "per";
124				status = "disabled";
125			};
126
127			pwm: pwm@208000 {
128				#pwm-cells = <3>;
129				compatible = "fsl,imx1-pwm";
130				reg = <0x00208000 0x1000>;
131				interrupts = <34>;
132				clocks = <&clks IMX1_CLK_DUMMY>,
133					 <&clks IMX1_CLK_PER1>;
134				clock-names = "ipg", "per";
135			};
136
137			dma: dma@209000 {
138				compatible = "fsl,imx1-dma";
139				reg = <0x00209000 0x1000>;
140				interrupts = <61 60>;
141				clocks = <&clks IMX1_CLK_HCLK>,
142					 <&clks IMX1_CLK_DMA_GATE>;
143				clock-names = "ipg", "ahb";
144				#dma-cells = <1>;
145			};
146
147			uart3: serial@20a000 {
148				compatible = "fsl,imx1-uart";
149				reg = <0x0020a000 0x1000>;
150				interrupts = <54 4 1>;
151				clocks = <&clks IMX1_CLK_UART3_GATE>,
152					 <&clks IMX1_CLK_PER1>;
153				clock-names = "ipg", "per";
154				status = "disabled";
155			};
156		};
157
158		aipi@210000 {
159			compatible = "fsl,aipi-bus", "simple-bus";
160			#address-cells = <1>;
161			#size-cells = <1>;
162			reg = <0x00210000 0x10000>;
163			ranges;
164
165			cspi1: spi@213000 {
166				#address-cells = <1>;
167				#size-cells = <0>;
168				compatible = "fsl,imx1-cspi";
169				reg = <0x00213000 0x1000>;
170				interrupts = <41>;
171				clocks = <&clks IMX1_CLK_DUMMY>,
172					 <&clks IMX1_CLK_PER1>;
173				clock-names = "ipg", "per";
174				status = "disabled";
175			};
176
177			i2c: i2c@217000 {
178				#address-cells = <1>;
179				#size-cells = <0>;
180				compatible = "fsl,imx1-i2c";
181				reg = <0x00217000 0x1000>;
182				interrupts = <39>;
183				clocks = <&clks IMX1_CLK_HCLK>;
184				status = "disabled";
185			};
186
187			cspi2: spi@219000 {
188				#address-cells = <1>;
189				#size-cells = <0>;
190				compatible = "fsl,imx1-cspi";
191				reg = <0x00219000 0x1000>;
192				interrupts = <40>;
193				clocks = <&clks IMX1_CLK_DUMMY>,
194					 <&clks IMX1_CLK_PER1>;
195				clock-names = "ipg", "per";
196				status = "disabled";
197			};
198
199			clks: ccm@21b000 {
200				compatible = "fsl,imx1-ccm";
201				reg = <0x0021b000 0x1000>;
202				#clock-cells = <1>;
203			};
204
205			iomuxc: iomuxc@21c000 {
206				compatible = "fsl,imx1-iomuxc";
207				reg = <0x0021c000 0x1000>;
208				#address-cells = <1>;
209				#size-cells = <1>;
210				ranges;
211
212				gpio1: gpio@21c000 {
213					compatible = "fsl,imx1-gpio";
214					reg = <0x0021c000 0x100>;
215					interrupts = <11>;
216					gpio-controller;
217					#gpio-cells = <2>;
218					interrupt-controller;
219					#interrupt-cells = <2>;
220				};
221
222				gpio2: gpio@21c100 {
223					compatible = "fsl,imx1-gpio";
224					reg = <0x0021c100 0x100>;
225					interrupts = <12>;
226					gpio-controller;
227					#gpio-cells = <2>;
228					interrupt-controller;
229					#interrupt-cells = <2>;
230				};
231
232				gpio3: gpio@21c200 {
233					compatible = "fsl,imx1-gpio";
234					reg = <0x0021c200 0x100>;
235					interrupts = <13>;
236					gpio-controller;
237					#gpio-cells = <2>;
238					interrupt-controller;
239					#interrupt-cells = <2>;
240				};
241
242				gpio4: gpio@21c300 {
243					compatible = "fsl,imx1-gpio";
244					reg = <0x0021c300 0x100>;
245					interrupts = <62>;
246					gpio-controller;
247					#gpio-cells = <2>;
248					interrupt-controller;
249					#interrupt-cells = <2>;
250				};
251			};
252		};
253
254		weim: weim@220000 {
255			#address-cells = <2>;
256			#size-cells = <1>;
257			compatible = "fsl,imx1-weim";
258			reg = <0x00220000 0x1000>;
259			clocks = <&clks IMX1_CLK_DUMMY>;
260			ranges = <
261				0 0 0x10000000 0x02000000
262				1 0 0x12000000 0x01000000
263				2 0 0x13000000 0x01000000
264				3 0 0x14000000 0x01000000
265				4 0 0x15000000 0x01000000
266				5 0 0x16000000 0x01000000
267			>;
268			status = "disabled";
269		};
270
271		esram: sram@300000 {
272			compatible = "mmio-sram";
273			reg = <0x00300000 0x20000>;
274			ranges = <0 0x00300000 0x20000>;
275			#address-cells = <1>;
276			#size-cells = <1>;
277		};
278	};
279};
280