1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * i2c-pca-isa.c driver for PCA9564 on ISA boards
4 * Copyright (C) 2004 Arcom Control Systems
5 * Copyright (C) 2008 Pengutronix
6 */
7
8 #include <linux/kernel.h>
9 #include <linux/ioport.h>
10 #include <linux/module.h>
11 #include <linux/moduleparam.h>
12 #include <linux/delay.h>
13 #include <linux/jiffies.h>
14 #include <linux/init.h>
15 #include <linux/interrupt.h>
16 #include <linux/wait.h>
17 #include <linux/isa.h>
18 #include <linux/i2c.h>
19 #include <linux/i2c-algo-pca.h>
20 #include <linux/io.h>
21
22 #include <asm/irq.h>
23
24 #define DRIVER "i2c-pca-isa"
25 #define IO_SIZE 4
26
27 static unsigned long base;
28 static int irq = -1;
29
30 /* Data sheet recommends 59kHz for 100kHz operation due to variation
31 * in the actual clock rate */
32 static int clock = 59000;
33
34 static struct i2c_adapter pca_isa_ops;
35 static wait_queue_head_t pca_wait;
36
pca_isa_writebyte(void * pd,int reg,int val)37 static void pca_isa_writebyte(void *pd, int reg, int val)
38 {
39 #ifdef DEBUG_IO
40 static char *names[] = { "T/O", "DAT", "ADR", "CON" };
41 printk(KERN_DEBUG "*** write %s at %#lx <= %#04x\n", names[reg],
42 base+reg, val);
43 #endif
44 outb(val, base+reg);
45 }
46
pca_isa_readbyte(void * pd,int reg)47 static int pca_isa_readbyte(void *pd, int reg)
48 {
49 int res = inb(base+reg);
50 #ifdef DEBUG_IO
51 {
52 static char *names[] = { "STA", "DAT", "ADR", "CON" };
53 printk(KERN_DEBUG "*** read %s => %#04x\n", names[reg], res);
54 }
55 #endif
56 return res;
57 }
58
pca_isa_waitforcompletion(void * pd)59 static int pca_isa_waitforcompletion(void *pd)
60 {
61 unsigned long timeout;
62 long ret;
63
64 if (irq > -1) {
65 ret = wait_event_timeout(pca_wait,
66 pca_isa_readbyte(pd, I2C_PCA_CON)
67 & I2C_PCA_CON_SI, pca_isa_ops.timeout);
68 } else {
69 /* Do polling */
70 timeout = jiffies + pca_isa_ops.timeout;
71 do {
72 ret = time_before(jiffies, timeout);
73 if (pca_isa_readbyte(pd, I2C_PCA_CON)
74 & I2C_PCA_CON_SI)
75 break;
76 udelay(100);
77 } while (ret);
78 }
79
80 return ret > 0;
81 }
82
pca_isa_resetchip(void * pd)83 static void pca_isa_resetchip(void *pd)
84 {
85 /* apparently only an external reset will do it. not a lot can be done */
86 printk(KERN_WARNING DRIVER ": Haven't figured out how to do a reset yet\n");
87 }
88
pca_handler(int this_irq,void * dev_id)89 static irqreturn_t pca_handler(int this_irq, void *dev_id) {
90 wake_up(&pca_wait);
91 return IRQ_HANDLED;
92 }
93
94 static struct i2c_algo_pca_data pca_isa_data = {
95 /* .data intentionally left NULL, not needed with ISA */
96 .write_byte = pca_isa_writebyte,
97 .read_byte = pca_isa_readbyte,
98 .wait_for_completion = pca_isa_waitforcompletion,
99 .reset_chip = pca_isa_resetchip,
100 };
101
102 static struct i2c_adapter pca_isa_ops = {
103 .owner = THIS_MODULE,
104 .algo_data = &pca_isa_data,
105 .name = "PCA9564/PCA9665 ISA Adapter",
106 .timeout = HZ,
107 };
108
pca_isa_match(struct device * dev,unsigned int id)109 static int pca_isa_match(struct device *dev, unsigned int id)
110 {
111 int match = base != 0;
112
113 if (match) {
114 if (irq <= -1)
115 dev_warn(dev, "Using polling mode (specify irq)\n");
116 } else
117 dev_err(dev, "Please specify I/O base\n");
118
119 return match;
120 }
121
pca_isa_probe(struct device * dev,unsigned int id)122 static int pca_isa_probe(struct device *dev, unsigned int id)
123 {
124 init_waitqueue_head(&pca_wait);
125
126 dev_info(dev, "i/o base %#08lx. irq %d\n", base, irq);
127
128 #ifdef CONFIG_PPC
129 if (check_legacy_ioport(base)) {
130 dev_err(dev, "I/O address %#08lx is not available\n", base);
131 goto out;
132 }
133 #endif
134
135 if (!request_region(base, IO_SIZE, "i2c-pca-isa")) {
136 dev_err(dev, "I/O address %#08lx is in use\n", base);
137 goto out;
138 }
139
140 if (irq > -1) {
141 if (request_irq(irq, pca_handler, 0, "i2c-pca-isa", &pca_isa_ops) < 0) {
142 dev_err(dev, "Request irq%d failed\n", irq);
143 goto out_region;
144 }
145 }
146
147 pca_isa_data.i2c_clock = clock;
148 if (i2c_pca_add_bus(&pca_isa_ops) < 0) {
149 dev_err(dev, "Failed to add i2c bus\n");
150 goto out_irq;
151 }
152
153 return 0;
154
155 out_irq:
156 if (irq > -1)
157 free_irq(irq, &pca_isa_ops);
158 out_region:
159 release_region(base, IO_SIZE);
160 out:
161 return -ENODEV;
162 }
163
pca_isa_remove(struct device * dev,unsigned int id)164 static void pca_isa_remove(struct device *dev, unsigned int id)
165 {
166 i2c_del_adapter(&pca_isa_ops);
167
168 if (irq > -1) {
169 disable_irq(irq);
170 free_irq(irq, &pca_isa_ops);
171 }
172 release_region(base, IO_SIZE);
173 }
174
175 static struct isa_driver pca_isa_driver = {
176 .match = pca_isa_match,
177 .probe = pca_isa_probe,
178 .remove = pca_isa_remove,
179 .driver = {
180 .owner = THIS_MODULE,
181 .name = DRIVER,
182 }
183 };
184
185 MODULE_AUTHOR("Ian Campbell <icampbell@arcom.com>");
186 MODULE_DESCRIPTION("ISA base PCA9564/PCA9665 driver");
187 MODULE_LICENSE("GPL");
188
189 module_param_hw(base, ulong, ioport, 0);
190 MODULE_PARM_DESC(base, "I/O base address");
191 module_param_hw(irq, int, irq, 0);
192 MODULE_PARM_DESC(irq, "IRQ");
193 module_param(clock, int, 0);
194 MODULE_PARM_DESC(clock, "Clock rate in hertz.\n\t\t"
195 "For PCA9564: 330000,288000,217000,146000,"
196 "88000,59000,44000,36000\n"
197 "\t\tFor PCA9665:\tStandard: 60300 - 100099\n"
198 "\t\t\t\tFast: 100100 - 400099\n"
199 "\t\t\t\tFast+: 400100 - 10000099\n"
200 "\t\t\t\tTurbo: Up to 1265800");
201 module_isa_driver(pca_isa_driver, 1);
202