1# q35 - VirtIO guest (serial console)
2# =========================================================
3#
4# Usage:
5#
6#   $ qemu-system-x86_64 \
7#     -nodefaults \
8#     -readconfig q35-virtio-serial.cfg \
9#     -display none -serial mon:stdio
10#
11# You will probably need to tweak the lines marked as
12# CHANGE ME before being able to use this configuration!
13#
14# The guest will have a selection of VirtIO devices
15# tailored towards optimal performance with modern guests,
16# and will be accessed through the serial console.
17#
18# ---------------------------------------------------------
19#
20# Using -nodefaults is required to have full control over
21# the virtual hardware: when it's specified, QEMU will
22# populate the board with only the builtin peripherals
23# plus a small selection of core PCI devices and
24# controllers; the user will then have to explicitly add
25# further devices.
26#
27# The core PCI devices show up in the guest as:
28#
29#   00:00.0 Host bridge
30#   00:1f.0 ISA bridge / LPC
31#   00:1f.2 SATA (AHCI) controller
32#   00:1f.3 SMBus controller
33#
34# This configuration file adds a number of other useful
35# devices, more specifically:
36#
37#   00.1c.* PCI bridge (PCI Express Root Ports)
38#   01:00.0 SCSI storage controller
39#   02:00.0 Ethernet controller
40#
41# More information about these devices is available below.
42#
43# We use '-display none' to prevent QEMU from creating a
44# graphical display window, which would serve no use in
45# this specific configuration, and '-serial mon:stdio' to
46# multiplex the guest's serial console and the QEMU monitor
47# to the host's stdio; use 'Ctrl+A h' to learn how to
48# switch between the two and more.
49
50
51# Machine options
52# =========================================================
53#
54# We use the q35 machine type and enable KVM acceleration
55# for better performance.
56#
57# Using less than 1 GiB of memory is probably not going to
58# yield good performance in the guest, and might even lead
59# to obscure boot issues in some cases.
60
61[machine]
62  type = "q35"
63
64[accel]
65  accel = "kvm"
66
67[memory]
68  size = "1024"
69
70
71# PCI bridge (PCI Express Root Ports)
72# =========================================================
73#
74# We create eight PCI Express Root Ports, and we plug them
75# all into separate functions of the same slot. Some of
76# them will be used by devices, the rest will remain
77# available for hotplug.
78
79[device "pcie.1"]
80  driver = "pcie-root-port"
81  bus = "pcie.0"
82  addr = "1c.0"
83  port = "1"
84  chassis = "1"
85  multifunction = "on"
86
87[device "pcie.2"]
88  driver = "pcie-root-port"
89  bus = "pcie.0"
90  addr = "1c.1"
91  port = "2"
92  chassis = "2"
93
94[device "pcie.3"]
95  driver = "pcie-root-port"
96  bus = "pcie.0"
97  addr = "1c.2"
98  port = "3"
99  chassis = "3"
100
101[device "pcie.4"]
102  driver = "pcie-root-port"
103  bus = "pcie.0"
104  addr = "1c.3"
105  port = "4"
106  chassis = "4"
107
108[device "pcie.5"]
109  driver = "pcie-root-port"
110  bus = "pcie.0"
111  addr = "1c.4"
112  port = "5"
113  chassis = "5"
114
115[device "pcie.6"]
116  driver = "pcie-root-port"
117  bus = "pcie.0"
118  addr = "1c.5"
119  port = "6"
120  chassis = "6"
121
122[device "pcie.7"]
123  driver = "pcie-root-port"
124  bus = "pcie.0"
125  addr = "1c.6"
126  port = "7"
127  chassis = "7"
128
129[device "pcie.8"]
130  driver = "pcie-root-port"
131  bus = "pcie.0"
132  addr = "1c.7"
133  port = "8"
134  chassis = "8"
135
136
137# SCSI storage controller (and storage)
138# =========================================================
139#
140# We use virtio-scsi here so that we can (hot)plug a large
141# number of disks without running into issues; a SCSI disk,
142# backed by a qcow2 disk image on the host's filesystem, is
143# attached to it.
144#
145# We also create an optical disk, mostly for installation
146# purposes: once the guest OS has been successfully
147# installed, the guest will no longer boot from optical
148# media. If you don't want, or no longer want, to have an
149# optical disk in the guest you can safely comment out
150# all relevant sections below.
151
152[device "scsi"]
153  driver = "virtio-scsi-pci"
154  bus = "pcie.1"
155  addr = "00.0"
156
157[device "scsi-disk"]
158  driver = "scsi-hd"
159  bus = "scsi.0"
160  drive = "disk"
161  bootindex = "1"
162
163[drive "disk"]
164  file = "guest.qcow2"                          # CHANGE ME
165  format = "qcow2"
166  if = "none"
167
168[device "scsi-optical-disk"]
169  driver = "scsi-cd"
170  bus = "scsi.0"
171  drive = "optical-disk"
172  bootindex = "2"
173
174[drive "optical-disk"]
175  file = "install.iso"                          # CHANGE ME
176  format = "raw"
177  if = "none"
178
179
180# Ethernet controller
181# =========================================================
182#
183# We use virtio-net for improved performance over emulated
184# hardware; on the host side, we take advantage of user
185# networking so that the QEMU process doesn't require any
186# additional privileges.
187
188[netdev "hostnet"]
189  type = "user"
190
191[device "net"]
192  driver = "virtio-net-pci"
193  netdev = "hostnet"
194  bus = "pcie.2"
195  addr = "00.0"
196