xref: /openbmc/u-boot/tools/mkexynosspl.c (revision e8f80a5a)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright (C) 2012 Samsung Electronics
4  */
5 
6 #include <stdio.h>
7 #include <stdlib.h>
8 #include <unistd.h>
9 #include <fcntl.h>
10 #include <errno.h>
11 #include <string.h>
12 #include <sys/stat.h>
13 #include <compiler.h>
14 
15 #define CHECKSUM_OFFSET		(14*1024-4)
16 #define FILE_PERM		(S_IRUSR | S_IWUSR | S_IRGRP \
17 				| S_IWGRP | S_IROTH | S_IWOTH)
18 /*
19  * Requirement for the fixed size SPL header:
20  * IROM code reads first (CHECKSUM_OFFSET + 4) bytes from boot device. It then
21  * calculates the checksum of CHECKSUM_OFFSET bytes and compares with data at
22  * CHECKSUM_OFFSET location.
23  *
24  * Requirement for the variable size SPL header:
25 
26  * IROM code reads the below header to find out the size of the blob (total
27  * size, header size included) and its checksum. Then it reads the rest of the
28  * blob [i.e size - sizeof(struct var_size_header) bytes], calculates the
29  * checksum and compares it with value read from the header.
30  */
31 struct var_size_header {
32 	uint32_t spl_size;
33 	uint32_t spl_checksum;
34 	uint32_t reserved[2];
35 };
36 
37 static const char *prog_name;
38 
write_to_file(int ofd,void * buffer,int size)39 static void write_to_file(int ofd, void *buffer, int size)
40 {
41 	if (write(ofd, buffer, size) == size)
42 		return;
43 
44 	fprintf(stderr, "%s: Failed to write to output file: %s\n",
45 		prog_name, strerror(errno));
46 	exit(EXIT_FAILURE);
47 }
48 
49 /*
50  * The argv is expected to include one optional parameter and two filenames:
51  * [--vs] IN OUT
52  *
53  * --vs - turns on the variable size SPL mode
54  * IN  - the u-boot SPL binary, usually u-boot-spl.bin
55  * OUT - the prepared SPL blob, usually ${BOARD}-spl.bin
56  *
57  * This utility first reads the "u-boot-spl.bin" into a buffer. In case of
58  * fixed size SPL the buffer size is exactly CHECKSUM_OFFSET (such that
59  * smaller u-boot-spl.bin gets padded with 0xff bytes, the larger than limit
60  * u-boot-spl.bin causes an error). For variable size SPL the buffer size is
61  * eqaul to size of the IN file.
62  *
63  * Then it calculates checksum of the buffer by just summing up all bytes.
64  * Then
65  *
66  * - for fixed size SPL the buffer is written into the output file and the
67  *   checksum is appended to the file in little endian format, which results
68  *   in checksum added exactly at CHECKSUM_OFFSET.
69  *
70  * - for variable size SPL the checksum and file size are stored in the
71  *   var_size_header structure (again, in little endian format) and the
72  *   structure is written into the output file. Then the buffer is written
73  *   into the output file.
74  */
main(int argc,char ** argv)75 int main(int argc, char **argv)
76 {
77 	unsigned char *buffer;
78 	int i, ifd, ofd;
79 	uint32_t checksum = 0;
80 	off_t	len;
81 	int	var_size_flag, read_size, count;
82 	struct stat stat;
83 	const int if_index = argc - 2; /* Input file name index in argv. */
84 	const int of_index = argc - 1; /* Output file name index in argv. */
85 
86 	/* Strip path off the program name. */
87 	prog_name = strrchr(argv[0], '/');
88 	if (prog_name)
89 		prog_name++;
90 	else
91 		prog_name = argv[0];
92 
93 	if ((argc < 3) ||
94 	    (argc > 4) ||
95 	    ((argc == 4) && strcmp(argv[1], "--vs"))) {
96 		fprintf(stderr, "Usage: %s [--vs] <infile> <outfile>\n",
97 			prog_name);
98 		exit(EXIT_FAILURE);
99 	}
100 
101 	/* four args mean variable size SPL wrapper is required */
102 	var_size_flag = (argc == 4);
103 
104 	ifd = open(argv[if_index], O_RDONLY);
105 	if (ifd < 0) {
106 		fprintf(stderr, "%s: Can't open %s: %s\n",
107 			prog_name, argv[if_index], strerror(errno));
108 		exit(EXIT_FAILURE);
109 	}
110 
111 	ofd = open(argv[of_index], O_WRONLY | O_CREAT | O_TRUNC, FILE_PERM);
112 	if (ofd < 0) {
113 		fprintf(stderr, "%s: Can't open %s: %s\n",
114 			prog_name, argv[of_index], strerror(errno));
115 		exit(EXIT_FAILURE);
116 	}
117 
118 	if (fstat(ifd, &stat)) {
119 		fprintf(stderr, "%s: Unable to get size of %s: %s\n",
120 			prog_name, argv[if_index], strerror(errno));
121 		exit(EXIT_FAILURE);
122 	}
123 
124 	len = stat.st_size;
125 
126 	if (var_size_flag) {
127 		read_size = len;
128 		count = len;
129 	} else {
130 		if (len > CHECKSUM_OFFSET) {
131 			fprintf(stderr,
132 				"%s: %s is too big (exceeds %d bytes)\n",
133 				prog_name, argv[if_index], CHECKSUM_OFFSET);
134 			exit(EXIT_FAILURE);
135 		}
136 		count = CHECKSUM_OFFSET;
137 		read_size = len;
138 	}
139 
140 	buffer = malloc(count);
141 	if (!buffer) {
142 		fprintf(stderr,
143 			"%s: Failed to allocate %d bytes to store %s\n",
144 			prog_name, count, argv[if_index]);
145 		exit(EXIT_FAILURE);
146 	}
147 
148 	if (read(ifd, buffer, read_size) != read_size) {
149 		fprintf(stderr, "%s: Can't read %s: %s\n",
150 			prog_name, argv[if_index], strerror(errno));
151 		exit(EXIT_FAILURE);
152 	}
153 
154 	/* Pad if needed with 0xff to make flashing faster. */
155 	if (read_size < count)
156 		memset((char *)buffer + read_size, 0xff, count - read_size);
157 
158 	for (i = 0, checksum = 0; i < count; i++)
159 		checksum += buffer[i];
160 	checksum = cpu_to_le32(checksum);
161 
162 	if (var_size_flag) {
163 		/* Prepare and write out the variable size SPL header. */
164 		struct var_size_header vsh;
165 		uint32_t spl_size;
166 
167 		memset(&vsh, 0, sizeof(vsh));
168 		memcpy(&vsh.spl_checksum, &checksum, sizeof(checksum));
169 
170 		spl_size = cpu_to_le32(count + sizeof(struct var_size_header));
171 		memcpy(&vsh.spl_size, &spl_size, sizeof(spl_size));
172 		write_to_file(ofd, &vsh, sizeof(vsh));
173 	}
174 
175 	write_to_file(ofd, buffer, count);
176 
177 	/* For fixed size SPL checksum is appended in the end. */
178 	if (!var_size_flag)
179 		write_to_file(ofd, &checksum, sizeof(checksum));
180 
181 	close(ifd);
182 	close(ofd);
183 	free(buffer);
184 
185 	return EXIT_SUCCESS;
186 }
187