| /openbmc/linux/sound/soc/sof/amd/ |
| H A D | acp-stream.c | 134 if (stream->active) in acp_dsp_stream_get()
139 stream->active = 1; in acp_dsp_stream_get()
145 stream->active = 1; in acp_dsp_stream_get()
165 stream->active = 0; in acp_dsp_stream_put()
182 adata->stream_buf[i].active = 0; in acp_dsp_stream_init()
|
| /openbmc/linux/Documentation/devicetree/bindings/serial/ |
| H A D | rs485.yaml | 32 rs485-rts-active-high:
36 rs485-rts-active-low:
40 rs485-rx-active-high:
42 True indicates active high (default is low).
61 the active state enables RX during TX.
|
| /openbmc/linux/arch/arm64/boot/dts/nvidia/ |
| H A D | tegra234-p3701-0000.dtsi | 132 enable-active-high;
151 tj_trip_active0: active-0 {
154 type = "active";
157 tj_trip_active1: active-1 {
160 type = "active";
|
| H A D | tegra210-smaug.dts | 1380 maxim,enable-active-discharge;
1396 maxim,enable-active-discharge;
1449 maxim,active-fps-power-up-slot = <4>;
1478 maxim,active-fps-power-up-slot = <1>;
1489 maxim,active-fps-power-up-slot = <5>;
1673 nvidia,core-power-req-active-high;
1674 nvidia,sys-clock-req-active-high;
1880 enable-active-high;
1899 enable-active-high;
1916 enable-active-high;
[all …]
|
| H A D | tegra234-p3768-0000+p3767-0000.dts | 94 enable-active-high;
104 map-active-0 {
109 map-active-1 {
114 map-active-2 {
|
| /openbmc/linux/drivers/gpu/drm/nouveau/nvkm/subdev/therm/ |
| H A D | temp.c | 85 bool active; in nvkm_therm_sensor_event() local
102 active = (dir == NVKM_THERM_THRS_RISING); in nvkm_therm_sensor_event()
105 if (active) { in nvkm_therm_sensor_event()
112 therm->emergency.downclock(therm, active); in nvkm_therm_sensor_event()
116 therm->emergency.pause(therm, active); in nvkm_therm_sensor_event()
119 if (active) { in nvkm_therm_sensor_event()
|
| /openbmc/linux/kernel/gcov/ |
| H A D | gcc_4_7.c | 285 unsigned int active; in gcov_info_dup() local
308 active = num_counter_active(info); in gcov_info_dup()
310 fi_size += sizeof(struct gcov_ctr_info) * active; in gcov_info_dup()
322 for (ct_idx = 0; ct_idx < active; ct_idx++) { in gcov_info_dup()
351 unsigned int active; in gcov_info_free() local
359 active = num_counter_active(info); in gcov_info_free()
367 for (ct_idx = 0; ct_idx < active; ct_idx++, ci_ptr++) in gcov_info_free()
|
| /openbmc/linux/drivers/misc/ibmasm/ |
| H A D | ibmasmfs.c | 221 int active; member
228 int active; member
354 event_data->active = 0; in event_file_open()
384 if (event_data->active) { in event_file_read()
388 event_data->active = 1; in event_file_read()
407 event_data->active = 0; in event_file_read()
438 rhbeat->active = 0; in r_heartbeat_file_open()
467 if (rhbeat->active) { in r_heartbeat_file_read()
471 rhbeat->active = 1; in r_heartbeat_file_read()
475 rhbeat->active = 0; in r_heartbeat_file_read()
[all …]
|
| /openbmc/linux/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ |
| H A D | macsec.c | 59 bool active; member
80 bool active; member
424 if (rx_sa->active == active) in macsec_rx_sa_active_update()
427 rx_sa->active = active; in macsec_rx_sa_active_update()
534 tx_sa->active = ctx_tx_sa->active; in mlx5e_macsec_add_txsa()
609 if (tx_sa->active == ctx_tx_sa->active) in mlx5e_macsec_upd_txsa()
612 tx_sa->active = ctx_tx_sa->active; in mlx5e_macsec_upd_txsa()
729 rx_sc->active = ctx_rx_sc->active; in mlx5e_macsec_add_rxsc()
780 if (rx_sc->active == ctx_rx_sc->active) in mlx5e_macsec_upd_rxsc()
783 rx_sc->active = ctx_rx_sc->active; in mlx5e_macsec_upd_rxsc()
[all …]
|
| /openbmc/linux/drivers/gpu/drm/i915/display/ |
| H A D | intel_modeset_setup.c | 46 if (!crtc_state->hw.active) in intel_crtc_disable_noatomic_begin()
89 crtc->active = false; in intel_crtc_disable_noatomic_begin()
333 crtc_state->uapi.active = crtc_state->hw.active; in intel_crtc_copy_hw_to_uapi_state()
458 if (crtc_state->hw.active) { in intel_sanitize_crtc()
476 if (!crtc_state->hw.active || in intel_sanitize_crtc()
554 crtc_state->hw.active && in has_bogus_dpll_config()
575 crtc_state->hw.active; in intel_sanitize_encoder()
703 crtc->active = crtc_state->hw.active; in intel_modeset_readout_hw_state()
705 if (crtc_state->hw.active) in intel_modeset_readout_hw_state()
814 if (crtc_state->hw.active) { in intel_modeset_readout_hw_state()
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/media/i2c/ |
| H A D | ti,ds90ub960.yaml | 134 hsync-active and vsync-active must be defined.
147 hsync-active and vsync-active must be defined.
160 hsync-active and vsync-active must be defined.
173 hsync-active and vsync-active must be defined.
273 hsync-active = <0>;
274 vsync-active = <1>;
|
| /openbmc/linux/drivers/staging/media/atomisp/pci/runtime/isys/src/ |
| H A D | csi_rx_rmgr.c | 141 if (bitop_getbit(pipe_io_status->active[port], isys_stream_id) == 0) { in ia_css_isys_csi_rx_register_stream()
142 bitop_setbit(pipe_io_status->active[port], isys_stream_id); in ia_css_isys_csi_rx_register_stream()
161 if (bitop_getbit(pipe_io_status->active[port], isys_stream_id) == 1) { in ia_css_isys_csi_rx_unregister_stream()
162 bitop_clearbit(pipe_io_status->active[port], isys_stream_id); in ia_css_isys_csi_rx_unregister_stream()
|
| /openbmc/linux/arch/arm/boot/dts/nxp/mxs/ |
| H A D | imx28-cfa10058.dts | 58 hsync-active = <0>;
59 vsync-active = <0>;
60 de-active = <1>;
61 pixelclk-active = <1>;
|
| H A D | imx28-cfa10056.dts | 102 hsync-active = <0>;
103 vsync-active = <0>;
104 de-active = <1>;
105 pixelclk-active = <1>;
|
| /openbmc/linux/arch/arm/boot/dts/allwinner/ |
| H A D | sun8i-s3-pinecube.dts | 70 hsync-active = <1>; /* Active high */
71 vsync-active = <0>; /* Active low */
72 data-active = <1>; /* Active high */
117 hsync-active = <1>; /* Active high */
118 vsync-active = <0>; /* Active low */
119 data-active = <1>; /* Active high */
|
| /openbmc/linux/arch/arm/boot/dts/nxp/lpc/ |
| H A D | lpc3250-phy3250.dts | 25 gpios = <&gpio 5 1 0>; /* GPO_P3 1, GPIO 80, active high */
30 gpios = <&gpio 5 14 0>; /* GPO_P3 14, GPIO 93, active high */
52 enable-active-high;
62 enable-active-high;
72 enable-active-high;
162 gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
|
| /openbmc/linux/fs/xfs/libxfs/ |
| H A D | xfs_attr.c | 130 ASSERT((path->active >= 0) && (path->active < XFS_DA_NODE_MAXDEPTH));
145 ASSERT((path->active >= 0) && (path->active < XFS_DA_NODE_MAXDEPTH));
178 ASSERT((path->active >= 0) && (path->active < XFS_DA_NODE_MAXDEPTH));
196 ASSERT((path->active >= 0) && (path->active < XFS_DA_NODE_MAXDEPTH));
618 ASSERT(state->path.blk[state->path.active - 1].magic == in xfs_attr_node_removename_setup()
1428 blk = &state->path.blk[state->path.active-1]; in xfs_attr_node_try_addname()
1433 if (state->path.active == 1) { in xfs_attr_node_try_addname()
1475 blk = &state->path.blk[state->path.active-1]; in xfs_attr_node_removename()
1507 if (retval && (state->path.active > 1)) { in xfs_attr_node_remove_attr()
1552 blk = &state->path.blk[state->path.active - 1]; in xfs_attr_node_get()
[all …]
|
| /openbmc/qemu/hw/m68k/ |
| H A D | mcf_intc.c | 38 uint64_t active; in mcf_intc_update() local
43 active = (s->ipr | s->ifr) & s->enabled & ~s->imr; in mcf_intc_update()
46 if (active) { in mcf_intc_update()
48 if ((active & 1) != 0 && s->icr[i] >= best_level) { in mcf_intc_update()
52 active >>= 1; in mcf_intc_update()
|
| /openbmc/linux/Documentation/devicetree/bindings/display/samsung/ |
| H A D | samsung,exynos7-decon.yaml | 45 Clock cycles for the active period of address signal is enabled until
49 wr-active:
52 Clock cycles for the active period of CS is enabled.
58 Clock cycles for the active period of CS is disabled until write
65 Clock cycles for the active period of CS signal is enabled until
|
| /openbmc/linux/drivers/input/misc/ |
| H A D | pm8xxx-vibrator.c | 65 bool active; member
118 vib->active = true; in pm8xxx_work_handler()
123 vib->active = false; in pm8xxx_work_handler()
127 pm8xxx_vib_set(vib, vib->active); in pm8xxx_work_handler()
141 if (vib->active) in pm8xxx_vib_close()
|
| /openbmc/linux/Documentation/devicetree/bindings/rtc/ |
| H A D | rtc-omap.txt | 31 - ti,active-high - Set input active high (by default active low)
51 ti,active-high;
|
| /openbmc/qemu/hw/xtensa/ |
| H A D | pic_cpu.c | 66 static void xtensa_set_irq(void *opaque, int irq, int active) in xtensa_set_irq() argument
75 if (active) { in xtensa_set_irq()
94 static void xtensa_set_runstall(void *opaque, int irq, int active) in xtensa_set_runstall() argument
97 xtensa_runstall(env, active); in xtensa_set_runstall()
|
| /openbmc/linux/Documentation/devicetree/bindings/media/ |
| H A D | st,stm32-dcmi.yaml | 67 hsync-active: false
68 vsync-active: false
111 hsync-active = <0>;
112 vsync-active = <0>;
|
| /openbmc/linux/Documentation/devicetree/bindings/display/panel/ |
| H A D | samsung,ld9040.yaml | 90 hsync-active = <0>;
91 vsync-active = <0>;
92 de-active = <0>;
93 pixelclk-active = <0>;
|
| /openbmc/linux/arch/powerpc/sysdev/ge/ |
| H A D | ge_pic.c | 232 u32 cause, mask, active; in gef_pic_get_irq() local
240 active = cause & mask; in gef_pic_get_irq()
242 if (active) { in gef_pic_get_irq()
244 if (active & (0x1 << hwirq)) in gef_pic_get_irq()
|