| /openbmc/linux/Documentation/arch/mips/ |
| H A D | ingenic-tcu.rst | 9 counters, timers, or PWM.
62 PWM drivers/pwm/pwm-jz4740.c
|
| /openbmc/linux/Documentation/devicetree/bindings/leds/backlight/ |
| H A D | sky81452-backlight.txt | 12 - skyworks,ignore-pwm : Ignore both PWM input
|
| H A D | arcxcnn_bl.txt | 16 - arc,dim-freq: PWM mode frequence setting (bits [3:0] used)
|
| /openbmc/u-boot/doc/device-tree-bindings/video/bridge/ |
| H A D | ps8622.txt | 13 - use-external-pwm: backlight will be controlled by an external PWM
|
| /openbmc/phosphor-dbus-interfaces/yaml/xyz/openbmc_project/Debug/Pid/ |
| H A D | ThermalPower.interface.yaml | 41 static unit, it can be RPM or PWM depending on PID parameter settings.
|
| /openbmc/linux/Documentation/devicetree/bindings/mfd/ |
| H A D | khadas,mcu.yaml | 14 system feature as PWM Fan control (for VIM2 rev14 or VIM3), User memory
|
| /openbmc/linux/Documentation/devicetree/bindings/hwmon/ |
| H A D | hpe,gxp-fan-ctrl.yaml | 22 - description: Fan controller PWM
|
| /openbmc/linux/arch/arm64/boot/dts/renesas/ |
| H A D | r9a07g043u11-smarc.dts | 21 * To enable MTU3a PWM on PMOD0,
|
| H A D | r9a07g044l2-smarc.dts | 14 * To enable MTU3a PWM on PMOD0,
|
| H A D | r9a07g054l2-smarc.dts | 14 * To enable MTU3a PWM on PMOD0,
|
| /openbmc/u-boot/drivers/power/regulator/ |
| H A D | Kconfig | 55 bool "Enable driver for PWM regulators"
58 Enable support for the PWM regulator functions which voltage are
59 controlled by PWM duty ratio. Some of Rockchip board using this kind
65 bool "Enable Driver for PWM regulators in SPL"
69 features for PWM regulators in SPL.
|
| /openbmc/linux/Documentation/firmware-guide/acpi/ |
| H A D | enumeration.rst | 288 Reference to PWM device
291 Sometimes a device can be a consumer of PWM channel. Obviously OS would like
305 "\\_SB.PCI0.PWM", // <PWM device reference>
306 0, // <PWM index>
307 600000000, // <PWM period>
308 0, // <PWM flags>
316 In the above example the PWM-based LED driver references to the PWM channel 0
317 of \_SB.PCI0.PWM device with initial period setting equal to 600 ms (note that
|
| /openbmc/linux/Documentation/devicetree/bindings/leds/ |
| H A D | leds-sc27xx-bltc.txt | 5 PWM mode or breath light mode.
|
| H A D | mediatek,mt6370-indicator.yaml | 14 Add MT6370 LED driver include 4-channel RGB LED support Register/PWM/Breath Mode
|
| H A D | leds-pwm.yaml | 7 title: LEDs connected to PWM
|
| H A D | leds-is31fl32xx.txt | 4 constant-current channels, each with independent 256-level PWM control.
|
| /openbmc/qemu/docs/system/arm/ |
| H A D | raspi.rst | 43 * Pulse Width Modulation (PWM)
|
| /openbmc/linux/Documentation/devicetree/bindings/pwm/ |
| H A D | imx-tpm-pwm.yaml | 7 title: Freescale i.MX TPM PWM controller
|
| H A D | pwm-tiehrpwm.yaml | 7 title: TI SOC EHRPWM based PWM controller
|
| /openbmc/linux/Documentation/devicetree/bindings/regulator/ |
| H A D | pwm-regulator.yaml | 7 title: Generic PWM Regulator
104 * Inverted PWM logic, and the duty cycle range is limited
|
| /openbmc/linux/Documentation/hwmon/ |
| H A D | corsair-psu.rst | 72 pwm1 PWM value, read only
73 pwm1_enable PWM mode, read only
|
| /openbmc/linux/Documentation/userspace-api/media/rc/ |
| H A D | lirc-set-rec-carrier-range.rst | 30 Frequency of the carrier that modulates PWM data, in Hz.
|
| /openbmc/u-boot/drivers/timer/ |
| H A D | atcpit100_timer.c | 46 #define PWM 4 macro
|
| /openbmc/linux/Documentation/devicetree/bindings/iio/chemical/ |
| H A D | sensirion,scd30.yaml | 34 description: GPIO connected to the PWM line
|
| /openbmc/linux/Documentation/devicetree/bindings/sound/ |
| H A D | st,sta32x.txt | 75 If present, PWM speed mode run on odd speed mode (341.3 kHz) on all
76 channels. If not present, normal PWM spped mode (384 kHz) will be used.
|