/openbmc/linux/drivers/platform/x86/amd/pmf/ |
H A D | Makefile | 9 auto-mode.o cnqf.o
|
/openbmc/linux/Documentation/networking/device_drivers/ethernet/intel/ |
H A D | e1000.rst | 70 :Valid Range: 0-2 (0=auto-negotiate, 1=half, 2=full) 75 set to auto-negotiate, the board auto-detects the correct duplex. If the 249 :Default Value: 0 (auto-negotiate at all supported speeds) 253 partner is set to auto-negotiate, the board will auto-detect the correct 346 - The default operation is auto-negotiate. The board advertises all 348 common speed and duplex mode IF the link partner is set to auto-negotiate. 350 - If Speed = 1000, limited auto-negotiation is enabled and only 1000 Mbps 351 is advertised (The 1000BaseT spec requires auto-negotiation.) 358 auto-negotiation process. It should be used when you wish to control which 359 speed and duplex combinations are advertised during the auto-negotiation
|
/openbmc/linux/arch/arm/boot/dts/nvidia/ |
H A D | tegra30-asus-tf700t.dts | 280 nvidia,emc-auto-cal-interval = <0x001fffff>; 316 nvidia,emc-auto-cal-interval = <0x001fffff>; 352 nvidia,emc-auto-cal-interval = <0x001fffff>; 388 nvidia,emc-auto-cal-interval = <0x001fffff>; 424 nvidia,emc-auto-cal-interval = <0x001fffff>; 458 nvidia,emc-auto-cal-interval = <0x001fffff>; 498 nvidia,emc-auto-cal-interval = <0x001fffff>; 534 nvidia,emc-auto-cal-interval = <0x001fffff>; 570 nvidia,emc-auto-cal-interval = <0x001fffff>; 606 nvidia,emc-auto-cal-interval = <0x001fffff>; [all …]
|
/openbmc/linux/kernel/time/ |
H A D | timeconst.bc | 6 auto t; 23 auto v; 34 auto s, m;
|
/openbmc/telemetry/ |
H A D | .gitignore | 38 # Gradle and Maven with auto-import 39 # When using Gradle or Maven with auto-import, you should exclude module files, 41 # auto-import.
|
/openbmc/linux/scripts/package/ |
H A D | mkspec | 12 if grep -q CONFIG_MODULES=y include/config/auto.conf; then
|
/openbmc/linux/Documentation/devicetree/bindings/mmc/ |
H A D | fsl-esdhc.txt | 34 - sdhci,auto-cmd12: specifies that a controller can only handle auto
|
/openbmc/phosphor-dbus-interfaces/yaml/xyz/openbmc_project/Control/Boot/ |
H A D | RebootPolicy.interface.yaml | 8 Whether or not auto reboot is enabled.
|
/openbmc/sdbusplus/tools/sdbusplus/templates/ |
H A D | signal.aserver.typeid.hpp.mako | 1 static constexpr auto _signal_typeid_${signal.snake_case} =
|
/openbmc/linux/Documentation/devicetree/bindings/power/supply/ |
H A D | qcom,pm8941-charger.yaml | 55 Below this value linear or switch-mode auto-trickle-charging will operate. 84 qcom,auto-recharge-threshold-voltage: 89 Battery voltage limit in uV below which auto-recharge functionality will restart charging 90 after end-of-charge; The high cutoff limit for auto-recharge is 5% above this value.
|
/openbmc/linux/Documentation/tools/rtla/ |
H A D | common_timerlat_aa.rst | 7 disable auto-analysis, reducing rtla timerlat cpu usage
|
/openbmc/u-boot/arch/mips/ |
H A D | Makefile.postlink | 8 -include include/config/auto.conf
|
/openbmc/linux/Documentation/ABI/testing/ |
H A D | sysfs-class-led-driver-aw200xx | 4 "auto", the dim will be calculated according to the
|
/openbmc/linux/Documentation/hwmon/ |
H A D | adm9240.rst | 106 - auto fan clock adjuster enabled for valid fan speed reading 116 - auto fan clock adjuster disabled 122 - auto fan clock adjuster enabled: adjusts fan_min 128 - auto fan clock adjuster enabled: adjusts fan_min 130 * fan speed may be displayed as zero until the auto fan clock divider
|
/openbmc/libbej/ |
H A D | meson.build | 12 'tests=' + (meson.is_subproject() ? 'disabled' : 'auto'),
|
/openbmc/u-boot/Documentation/sphinx-static/ |
H A D | theme_overrides.css | 31 * - make the overflow auto (scrollbar if needed) 36 .wy-table-responsive { overflow: auto; }
|
/openbmc/openbmc/poky/meta/recipes-kernel/systemtap/systemtap/ |
H A D | 0001-configure.ac-fix-broken-libdebuginfod-library-auto-d.patch | 4 Subject: [PATCH 1/2] configure.ac: fix broken libdebuginfod library auto 8 commit, libdebuginfod.so library auto detection is broken. It was reported by Martin Jansa
|
/openbmc/phosphor-webui/app/common/styles/base/ |
H A D | foundation.scss | 303 height: auto; } 372 overflow: auto; } 443 height: auto; 447 height: auto; 512 height: auto; } 697 height: auto; 756 width: auto; 757 height: auto; 759 clip: auto; } 787 margin-right: auto; [all …]
|
/openbmc/openbmc/meta-phosphor/recipes-core/base-files/base-files/df-mmc/ |
H A D | fstab | 3 /dev/root / auto defaults 1 1
|
/openbmc/openbmc/meta-phosphor/recipes-core/base-files/base-files/df-ubi/ |
H A D | fstab | 3 /dev/root / auto defaults 1 1
|
/openbmc/gpioplus/ |
H A D | meson.build | 8 'tests=' + (meson.is_subproject() ? 'disabled' : 'auto'),
|
/openbmc/sdeventplus/ |
H A D | meson.build | 9 'tests=' + (meson.is_subproject() ? 'disabled' : 'auto'),
|
/openbmc/u-boot/board/synopsys/hsdk/ |
H A D | README | 36 file. Note uboot.env is not just a text file but it is auto-generated 53 - SPI-flahs is used as a storage for image of an application auto-executed 95 1. The HSDK board is supposed to auto-start U-Boot image stored in on-board 121 and stop auto-execution of existing `bootcmd` pressing any key in serial
|
/openbmc/openbmc-test-automation/redfish/extended/ |
H A D | test_service_restart_policy.robot | 21 [Documentation] Kill active services and expect auto restart. 84 # From service list it will check service auto-restart policy 99 ... Fail msg=All the given services have incorrect auto-restart policy. 102 …... Run Keyword And Continue On Failure Fail msg=Listed services are having incorrect auto-re…
|
/openbmc/openbmc/poky/meta-poky/conf/distro/include/ |
H A D | poky-floating-revisions.inc | 2 # Set recipe versions to auto-rev for cutting edge testing
|