Searched hist:f828ca6a (Results 1 – 6 of 6) sorted by relevance
| /openbmc/linux/drivers/net/ethernet/mellanox/mlx5/core/lib/ |
| H A D | port_tun.c | f828ca6a Sun Nov 17 07:32:24 CST 2019 Eli Cohen <eli@mellanox.com> net/mlx5e: Add support for hw encapsulation of MPLS over UDP
MPLS over UDP is supported by adding a rule on a representor net device
which does tunnel_key set, push mpls and forward to a baredup device. At
the hardware level we use a packet_reformat_context object to do the
encapsulation of the packet.
The resulting packet looks as follows (left side transmitted first):
outer L2 | outer IP | UDP | MPLS | inner L3 and data |
Example usage:
tc filter add dev $rep0 protocol ip prio 1 root flower skip_sw \
action tunnel_key set src_ip 8.8.8.21 dst_ip 8.8.8.24 id 555 \
dst_port 6635 tos 4 ttl 6 csum action mpls push protocol 0x8847 \
label 555 tc 3 action mirred egress redirect dev bareudp0
This is how the filter is shown with tc filter show:
tc filter show dev enp59s0f0_0 ingress
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1
eth_type ipv4
skip_sw
in_hw in_hw_count 1
action order 1: tunnel_key set
src_ip 8.8.8.21
dst_ip 8.8.8.24
key_id 555
dst_port 6635
csum
tos 0x4
ttl 6 pipe
index 1 ref 1 bind 1
action order 2: mpls push protocol mpls_uc label 555 tc 3 ttl 255 pipe
index 1 ref 1 bind 1
action order 3: mirred (Egress Redirect to device bareudp0) stolen
index 1 ref 1 bind 1
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Eli Britstein <elibr@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
f828ca6a Sun Nov 17 07:32:24 CST 2019 Eli Cohen <eli@mellanox.com> net/mlx5e: Add support for hw encapsulation of MPLS over UDP
MPLS over UDP is supported by adding a rule on a representor net device
which does tunnel_key set, push mpls and forward to a baredup device. At
the hardware level we use a packet_reformat_context object to do the
encapsulation of the packet.
The resulting packet looks as follows (left side transmitted first):
outer L2 | outer IP | UDP | MPLS | inner L3 and data |
Example usage:
tc filter add dev $rep0 protocol ip prio 1 root flower skip_sw \
action tunnel_key set src_ip 8.8.8.21 dst_ip 8.8.8.24 id 555 \
dst_port 6635 tos 4 ttl 6 csum action mpls push protocol 0x8847 \
label 555 tc 3 action mirred egress redirect dev bareudp0
This is how the filter is shown with tc filter show:
tc filter show dev enp59s0f0_0 ingress
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1
eth_type ipv4
skip_sw
in_hw in_hw_count 1
action order 1: tunnel_key set
src_ip 8.8.8.21
dst_ip 8.8.8.24
key_id 555
dst_port 6635
csum
tos 0x4
ttl 6 pipe
index 1 ref 1 bind 1
action order 2: mpls push protocol mpls_uc label 555 tc 3 ttl 255 pipe
index 1 ref 1 bind 1
action order 3: mirred (Egress Redirect to device bareudp0) stolen
index 1 ref 1 bind 1
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Eli Britstein <elibr@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
| /openbmc/linux/drivers/net/ethernet/mellanox/mlx5/core/en/ |
| H A D | tc_tun_mplsoudp.c | f828ca6a Sun Nov 17 07:32:24 CST 2019 Eli Cohen <eli@mellanox.com> net/mlx5e: Add support for hw encapsulation of MPLS over UDP
MPLS over UDP is supported by adding a rule on a representor net device
which does tunnel_key set, push mpls and forward to a baredup device. At
the hardware level we use a packet_reformat_context object to do the
encapsulation of the packet.
The resulting packet looks as follows (left side transmitted first):
outer L2 | outer IP | UDP | MPLS | inner L3 and data |
Example usage:
tc filter add dev $rep0 protocol ip prio 1 root flower skip_sw \
action tunnel_key set src_ip 8.8.8.21 dst_ip 8.8.8.24 id 555 \
dst_port 6635 tos 4 ttl 6 csum action mpls push protocol 0x8847 \
label 555 tc 3 action mirred egress redirect dev bareudp0
This is how the filter is shown with tc filter show:
tc filter show dev enp59s0f0_0 ingress
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1
eth_type ipv4
skip_sw
in_hw in_hw_count 1
action order 1: tunnel_key set
src_ip 8.8.8.21
dst_ip 8.8.8.24
key_id 555
dst_port 6635
csum
tos 0x4
ttl 6 pipe
index 1 ref 1 bind 1
action order 2: mpls push protocol mpls_uc label 555 tc 3 ttl 255 pipe
index 1 ref 1 bind 1
action order 3: mirred (Egress Redirect to device bareudp0) stolen
index 1 ref 1 bind 1
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Eli Britstein <elibr@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
f828ca6a Sun Nov 17 07:32:24 CST 2019 Eli Cohen <eli@mellanox.com> net/mlx5e: Add support for hw encapsulation of MPLS over UDP
MPLS over UDP is supported by adding a rule on a representor net device
which does tunnel_key set, push mpls and forward to a baredup device. At
the hardware level we use a packet_reformat_context object to do the
encapsulation of the packet.
The resulting packet looks as follows (left side transmitted first):
outer L2 | outer IP | UDP | MPLS | inner L3 and data |
Example usage:
tc filter add dev $rep0 protocol ip prio 1 root flower skip_sw \
action tunnel_key set src_ip 8.8.8.21 dst_ip 8.8.8.24 id 555 \
dst_port 6635 tos 4 ttl 6 csum action mpls push protocol 0x8847 \
label 555 tc 3 action mirred egress redirect dev bareudp0
This is how the filter is shown with tc filter show:
tc filter show dev enp59s0f0_0 ingress
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1
eth_type ipv4
skip_sw
in_hw in_hw_count 1
action order 1: tunnel_key set
src_ip 8.8.8.21
dst_ip 8.8.8.24
key_id 555
dst_port 6635
csum
tos 0x4
ttl 6 pipe
index 1 ref 1 bind 1
action order 2: mpls push protocol mpls_uc label 555 tc 3 ttl 255 pipe
index 1 ref 1 bind 1
action order 3: mirred (Egress Redirect to device bareudp0) stolen
index 1 ref 1 bind 1
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Eli Britstein <elibr@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
| H A D | tc_tun.h | f828ca6a Sun Nov 17 07:32:24 CST 2019 Eli Cohen <eli@mellanox.com> net/mlx5e: Add support for hw encapsulation of MPLS over UDP
MPLS over UDP is supported by adding a rule on a representor net device
which does tunnel_key set, push mpls and forward to a baredup device. At
the hardware level we use a packet_reformat_context object to do the
encapsulation of the packet.
The resulting packet looks as follows (left side transmitted first):
outer L2 | outer IP | UDP | MPLS | inner L3 and data |
Example usage:
tc filter add dev $rep0 protocol ip prio 1 root flower skip_sw \
action tunnel_key set src_ip 8.8.8.21 dst_ip 8.8.8.24 id 555 \
dst_port 6635 tos 4 ttl 6 csum action mpls push protocol 0x8847 \
label 555 tc 3 action mirred egress redirect dev bareudp0
This is how the filter is shown with tc filter show:
tc filter show dev enp59s0f0_0 ingress
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1
eth_type ipv4
skip_sw
in_hw in_hw_count 1
action order 1: tunnel_key set
src_ip 8.8.8.21
dst_ip 8.8.8.24
key_id 555
dst_port 6635
csum
tos 0x4
ttl 6 pipe
index 1 ref 1 bind 1
action order 2: mpls push protocol mpls_uc label 555 tc 3 ttl 255 pipe
index 1 ref 1 bind 1
action order 3: mirred (Egress Redirect to device bareudp0) stolen
index 1 ref 1 bind 1
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Eli Britstein <elibr@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
f828ca6a Sun Nov 17 07:32:24 CST 2019 Eli Cohen <eli@mellanox.com> net/mlx5e: Add support for hw encapsulation of MPLS over UDP
MPLS over UDP is supported by adding a rule on a representor net device
which does tunnel_key set, push mpls and forward to a baredup device. At
the hardware level we use a packet_reformat_context object to do the
encapsulation of the packet.
The resulting packet looks as follows (left side transmitted first):
outer L2 | outer IP | UDP | MPLS | inner L3 and data |
Example usage:
tc filter add dev $rep0 protocol ip prio 1 root flower skip_sw \
action tunnel_key set src_ip 8.8.8.21 dst_ip 8.8.8.24 id 555 \
dst_port 6635 tos 4 ttl 6 csum action mpls push protocol 0x8847 \
label 555 tc 3 action mirred egress redirect dev bareudp0
This is how the filter is shown with tc filter show:
tc filter show dev enp59s0f0_0 ingress
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1
eth_type ipv4
skip_sw
in_hw in_hw_count 1
action order 1: tunnel_key set
src_ip 8.8.8.21
dst_ip 8.8.8.24
key_id 555
dst_port 6635
csum
tos 0x4
ttl 6 pipe
index 1 ref 1 bind 1
action order 2: mpls push protocol mpls_uc label 555 tc 3 ttl 255 pipe
index 1 ref 1 bind 1
action order 3: mirred (Egress Redirect to device bareudp0) stolen
index 1 ref 1 bind 1
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Eli Britstein <elibr@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
| H A D | tc_tun.c | f828ca6a Sun Nov 17 07:32:24 CST 2019 Eli Cohen <eli@mellanox.com> net/mlx5e: Add support for hw encapsulation of MPLS over UDP
MPLS over UDP is supported by adding a rule on a representor net device
which does tunnel_key set, push mpls and forward to a baredup device. At
the hardware level we use a packet_reformat_context object to do the
encapsulation of the packet.
The resulting packet looks as follows (left side transmitted first):
outer L2 | outer IP | UDP | MPLS | inner L3 and data |
Example usage:
tc filter add dev $rep0 protocol ip prio 1 root flower skip_sw \
action tunnel_key set src_ip 8.8.8.21 dst_ip 8.8.8.24 id 555 \
dst_port 6635 tos 4 ttl 6 csum action mpls push protocol 0x8847 \
label 555 tc 3 action mirred egress redirect dev bareudp0
This is how the filter is shown with tc filter show:
tc filter show dev enp59s0f0_0 ingress
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1
eth_type ipv4
skip_sw
in_hw in_hw_count 1
action order 1: tunnel_key set
src_ip 8.8.8.21
dst_ip 8.8.8.24
key_id 555
dst_port 6635
csum
tos 0x4
ttl 6 pipe
index 1 ref 1 bind 1
action order 2: mpls push protocol mpls_uc label 555 tc 3 ttl 255 pipe
index 1 ref 1 bind 1
action order 3: mirred (Egress Redirect to device bareudp0) stolen
index 1 ref 1 bind 1
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Eli Britstein <elibr@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
f828ca6a Sun Nov 17 07:32:24 CST 2019 Eli Cohen <eli@mellanox.com> net/mlx5e: Add support for hw encapsulation of MPLS over UDP
MPLS over UDP is supported by adding a rule on a representor net device
which does tunnel_key set, push mpls and forward to a baredup device. At
the hardware level we use a packet_reformat_context object to do the
encapsulation of the packet.
The resulting packet looks as follows (left side transmitted first):
outer L2 | outer IP | UDP | MPLS | inner L3 and data |
Example usage:
tc filter add dev $rep0 protocol ip prio 1 root flower skip_sw \
action tunnel_key set src_ip 8.8.8.21 dst_ip 8.8.8.24 id 555 \
dst_port 6635 tos 4 ttl 6 csum action mpls push protocol 0x8847 \
label 555 tc 3 action mirred egress redirect dev bareudp0
This is how the filter is shown with tc filter show:
tc filter show dev enp59s0f0_0 ingress
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1
eth_type ipv4
skip_sw
in_hw in_hw_count 1
action order 1: tunnel_key set
src_ip 8.8.8.21
dst_ip 8.8.8.24
key_id 555
dst_port 6635
csum
tos 0x4
ttl 6 pipe
index 1 ref 1 bind 1
action order 2: mpls push protocol mpls_uc label 555 tc 3 ttl 255 pipe
index 1 ref 1 bind 1
action order 3: mirred (Egress Redirect to device bareudp0) stolen
index 1 ref 1 bind 1
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Eli Britstein <elibr@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
| /openbmc/linux/drivers/net/ethernet/mellanox/mlx5/core/ |
| H A D | Makefile | f828ca6a Sun Nov 17 07:32:24 CST 2019 Eli Cohen <eli@mellanox.com> net/mlx5e: Add support for hw encapsulation of MPLS over UDP
MPLS over UDP is supported by adding a rule on a representor net device
which does tunnel_key set, push mpls and forward to a baredup device. At
the hardware level we use a packet_reformat_context object to do the
encapsulation of the packet.
The resulting packet looks as follows (left side transmitted first):
outer L2 | outer IP | UDP | MPLS | inner L3 and data |
Example usage:
tc filter add dev $rep0 protocol ip prio 1 root flower skip_sw \
action tunnel_key set src_ip 8.8.8.21 dst_ip 8.8.8.24 id 555 \
dst_port 6635 tos 4 ttl 6 csum action mpls push protocol 0x8847 \
label 555 tc 3 action mirred egress redirect dev bareudp0
This is how the filter is shown with tc filter show:
tc filter show dev enp59s0f0_0 ingress
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1
eth_type ipv4
skip_sw
in_hw in_hw_count 1
action order 1: tunnel_key set
src_ip 8.8.8.21
dst_ip 8.8.8.24
key_id 555
dst_port 6635
csum
tos 0x4
ttl 6 pipe
index 1 ref 1 bind 1
action order 2: mpls push protocol mpls_uc label 555 tc 3 ttl 255 pipe
index 1 ref 1 bind 1
action order 3: mirred (Egress Redirect to device bareudp0) stolen
index 1 ref 1 bind 1
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Eli Britstein <elibr@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
f828ca6a Sun Nov 17 07:32:24 CST 2019 Eli Cohen <eli@mellanox.com> net/mlx5e: Add support for hw encapsulation of MPLS over UDP
MPLS over UDP is supported by adding a rule on a representor net device
which does tunnel_key set, push mpls and forward to a baredup device. At
the hardware level we use a packet_reformat_context object to do the
encapsulation of the packet.
The resulting packet looks as follows (left side transmitted first):
outer L2 | outer IP | UDP | MPLS | inner L3 and data |
Example usage:
tc filter add dev $rep0 protocol ip prio 1 root flower skip_sw \
action tunnel_key set src_ip 8.8.8.21 dst_ip 8.8.8.24 id 555 \
dst_port 6635 tos 4 ttl 6 csum action mpls push protocol 0x8847 \
label 555 tc 3 action mirred egress redirect dev bareudp0
This is how the filter is shown with tc filter show:
tc filter show dev enp59s0f0_0 ingress
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1
eth_type ipv4
skip_sw
in_hw in_hw_count 1
action order 1: tunnel_key set
src_ip 8.8.8.21
dst_ip 8.8.8.24
key_id 555
dst_port 6635
csum
tos 0x4
ttl 6 pipe
index 1 ref 1 bind 1
action order 2: mpls push protocol mpls_uc label 555 tc 3 ttl 255 pipe
index 1 ref 1 bind 1
action order 3: mirred (Egress Redirect to device bareudp0) stolen
index 1 ref 1 bind 1
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Eli Britstein <elibr@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
| H A D | en_tc.c | f828ca6a Sun Nov 17 07:32:24 CST 2019 Eli Cohen <eli@mellanox.com> net/mlx5e: Add support for hw encapsulation of MPLS over UDP
MPLS over UDP is supported by adding a rule on a representor net device
which does tunnel_key set, push mpls and forward to a baredup device. At
the hardware level we use a packet_reformat_context object to do the
encapsulation of the packet.
The resulting packet looks as follows (left side transmitted first):
outer L2 | outer IP | UDP | MPLS | inner L3 and data |
Example usage:
tc filter add dev $rep0 protocol ip prio 1 root flower skip_sw \
action tunnel_key set src_ip 8.8.8.21 dst_ip 8.8.8.24 id 555 \
dst_port 6635 tos 4 ttl 6 csum action mpls push protocol 0x8847 \
label 555 tc 3 action mirred egress redirect dev bareudp0
This is how the filter is shown with tc filter show:
tc filter show dev enp59s0f0_0 ingress
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1
eth_type ipv4
skip_sw
in_hw in_hw_count 1
action order 1: tunnel_key set
src_ip 8.8.8.21
dst_ip 8.8.8.24
key_id 555
dst_port 6635
csum
tos 0x4
ttl 6 pipe
index 1 ref 1 bind 1
action order 2: mpls push protocol mpls_uc label 555 tc 3 ttl 255 pipe
index 1 ref 1 bind 1
action order 3: mirred (Egress Redirect to device bareudp0) stolen
index 1 ref 1 bind 1
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Eli Britstein <elibr@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
f828ca6a Sun Nov 17 07:32:24 CST 2019 Eli Cohen <eli@mellanox.com> net/mlx5e: Add support for hw encapsulation of MPLS over UDP
MPLS over UDP is supported by adding a rule on a representor net device
which does tunnel_key set, push mpls and forward to a baredup device. At
the hardware level we use a packet_reformat_context object to do the
encapsulation of the packet.
The resulting packet looks as follows (left side transmitted first):
outer L2 | outer IP | UDP | MPLS | inner L3 and data |
Example usage:
tc filter add dev $rep0 protocol ip prio 1 root flower skip_sw \
action tunnel_key set src_ip 8.8.8.21 dst_ip 8.8.8.24 id 555 \
dst_port 6635 tos 4 ttl 6 csum action mpls push protocol 0x8847 \
label 555 tc 3 action mirred egress redirect dev bareudp0
This is how the filter is shown with tc filter show:
tc filter show dev enp59s0f0_0 ingress
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1
eth_type ipv4
skip_sw
in_hw in_hw_count 1
action order 1: tunnel_key set
src_ip 8.8.8.21
dst_ip 8.8.8.24
key_id 555
dst_port 6635
csum
tos 0x4
ttl 6 pipe
index 1 ref 1 bind 1
action order 2: mpls push protocol mpls_uc label 555 tc 3 ttl 255 pipe
index 1 ref 1 bind 1
action order 3: mirred (Egress Redirect to device bareudp0) stolen
index 1 ref 1 bind 1
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Eli Britstein <elibr@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|